1. No category

TRIMS
A R C H I T E C T U R A L M E TA L S
FIBER CEMENT PANEL TRIMS
PRODUCT BROCHURE
TRIMS
ARCHITECTURAL METALS / TRIMS
PRECISION TRIMS
PERFECTLY EXECUTED.
In collaboration with an industry leading fiber cement panel manufacturer, Fry
Reglet designed a comprehensive trim system, specifically engineered for 5/16”
fiber cement panels. This series of extruded aluminum trims provides a smooth,
seamless, installation friendly system that is unparalleled in the fiber cement panel
industry. Vertical and horizontal trims align perfectly and allow for panels to be
installed according to the panel manufacturer’s prescribed fastener schedule without
causing panel breakage or bowing. All trims are available in primed, clear anodized
or factory powder coat, custom color or perfectly matched to the fiber cement panel
manufacturer’s pre-finished color panels.
For more than 65 years, Fry Reglet has been the trusted source for superior metal
fabrications and component systems. All of Fry Reglet's products embody precision
engineering, expert manufacturing and inherent sustainability. At Fry Reglet, we pride
ourselves on guaranteed quality, hands-on customer service that has solidified our
reputation of excellence, unmatched by our competitors.
www.fryreglet.com
| 3
CONTENTS
A
Trims
A
TRIMS
A.1
F Molding
A.2
J-Channel
A.3
Vertical H Mold
A.4
Vertical Molding
A.5
Vertical Retainer
A.6
Vertical Insert
A.7
Vertical Offset
A.8
Vertical Lap Insert
A.9
Base
A.10
Horizontal
A.11
Horizontal Notch
A.12
Double Horizontal
A.13
Drip Cap / Drip Cap 875
A.14
Inside Corner
A.15
Integral Inside Corner
A.16
Inside Corner Transition
A.17
Intergral Inside Lap Corner
A.18
Outside Corner
A.19
Bullnose Outside Corner
A.20
Outside Corner Transition
A.21
Integral Outside Corner / Lap Corner
A.22
X Outside Corner Lap Trim
A.23
W Inside Corner Lap Trim
A.24
J Channel Lap Trim
A.25
F Channel Lap Trim
AB.1
Finishes
AB
FINISHES
4 |
www.fryreglet.com
ARCHITECTURAL METALS / TRIMS
SHAPE FINDER INDEX
A Trims
usage
This chart is designed to help you locate a specific shape in the Fry Reglet Design Guide. Find the shape you want.
Detailed information can be found on the page number above the shape.
A.1
A.2
A.3
A.4
A.5
VERTICAL / HORIZONTAL
F MOLDING
VERTICAL / HORIZONTAL
J-CHANNEL
VERTICAL
H MOLD
VERTICAL
MOLDING
VERTICAL
RETAINER
A.6
A.7
A.8
A.9
A.10
VERTICAL
INSERT
VERTICAL
OFFSET
VERTICAL
LAP
INSERT
BASE
HORIZONTAL
A.11
A.12
A.13
A.14
A.15
HORIZONTAL
NOTCH
DOUBLE
HORIZONTAL
DRIP CAP /
DRIP CAP 875
INSIDE
CORNER
INTEGRAL
INSIDE
CORNER
A.16
A.17
A.18
A.19
A.20
INSIDE
CORNER
TRANSITION
INTEGRAL
INSIDE
LAP
CORNER
A.16
A.21
A.17
A.22
A.18
A.23
A.19
A.24
A.20
A.25
INTEGRAL OUTSIDE
CORNER / LAP CORNER
X OUTSIDE CORNER
LAP TRIM
W INSIDE CORNER
LAP TRIM
J CHANNEL
LAP TRIM
F CHANNEL
LAP TRIM
OUTSIDE
CORNER
BULLNOSE
OUTSIDE
CORNER
OUTSIDE
CORNER
TRANSITION
www.fryreglet.com
| 5
A.1
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
F MOLDING
Soffit
1 5/8"
1/2"
3/8"
Metal or Wood
Framing
F Molding
1/2"
3/8"
5/16" Fiber Cement Panel
Weather Resistive Barrier
Wall Sheathing
usage
Fry Reglet FCP F Molding is a termination
INSTALLATION DETAIL
/
ISO View
trim designed to cover the edge of the Fiber
Cement Panel at intersections with sills, jambs
and soffits. Can be used with vertical and
horizontal applications.
Wall Sheathing
guide specification
Metal or Wood
Framing
Where indicated on drawings, Fry Reglet
F Molding, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with primed finish,
clear anodized or other specified finish. Refer
to finish section.
note:
Do not use F Molding Trim horizontally
with short leg up.
SIZES
6 |
REVEAL
DEPTH
NUMBER
NOM. 3 / 8 "
FCP-F MOLD
www.fryreglet.com
F Molding
Weather Resistive Barrier
5/16" Fiber Cement Panel
ARCHITECTURAL METALS / TRIMS
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
A.2
J CHANNEL
Metal or Wood
Framing
Wall Sheathing
1 1/8"
1/2"
3/8"
Weather
Resistive
Barrier
3/8"
5/16" Fiber
Cement Panel
Caulk Junction &
Foam Backing Rod
INSTALLATION DETAIL
usage
J Channel
/
ISO View
Fry Reglet FCP J Channel is a termination
trim designed to cover the edge of the Fiber
Cement Panel at intersections with sills,
jambs and soffits. Can be used with vertical
and horizontal applications.
guide specification
Where indicated on drawings, Fry Reglet
J Channel, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum
Metal or Wood
Framing
Caulk Junction
Wall Sheathing
& Foam Backing Rod
Weather Resistive Barrier
5/16" Fiber Cement Panel
shall be extruded alloy 6063 T5, with primed
finish, clear anodized or other specified
J Channel
finish. Refer to finish section.
note:
Do not use J-Channel Trim horizontally
with short leg up.
SIZES
REVEAL
DEPTH
NUMBER
NOM. 3 / 8 "
FCP-J CHANNEL
www.fryreglet.com
| 7
A.3
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
VERTICAL
H MOLDING
Metal or Wood
Framing
2 1/8"
3/8"
1/2"
Wall Sheathing
Weather Resistive Barrier
1/2"
5/16" Fiber Cement Panel
Vertical H Molding
INSTALLATION DETAIL
usage
/
ISO View
Fry Reglet FCP Vertical H Molding provides
a 1/2" spline between Fiber Cement Panels.
Metal or Wood
Framing
The 1/2" exposed spline covers the panels
edges to create a vertical design element.
guide specification
Where indicated on drawings, Fry Reglet
Vertical H Molding, as manufactured by
Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5,
Wall Sheathing
with primed finish, clear anodized or other
specified finish. Refer to finish section.
note:
o not use Vertical H Molding in a
D
horizontal application.
SIZES
8 |
5/16" Fiber Cement Panel
Vertical H Molding
REVEAL
DEPTH
NUMBER
NOM. 3 / 8 "
H VERT MOLD
www.fryreglet.com
Weather
Resistive
Barrier
5/16" Fiber Cement Panel
ARCHITECTURAL METALS / TRIMS
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
A.4
VERTICAL
MOLDING
Metal or Wood
Framing
2 11/16"
1/2"
3/8"
Weather
Resistive
Barrier
Wall Sheathing
3/8"
1/2"
3/8"
Vertical Molding
5/16" Fiber Cement Panel
INSTALLATION DETAIL
usage
/
ISO View
Fry Reglet FCP Vertical Molding creates
an attractive vertical reveal between Fiber
Metal or Wood
Framing
Cement Panels. The reveal becomes a design
Wall Sheathing
element to enhance building exteriors.
guide specification
Where indicated on drawings, Fry Reglet
Vertical Molding, as manufactured by Fry
Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5,
Weather
Resistive
Barrier
with primed finish, clear anodized or other
Vertical Molding
specified finish. Refer to finish section.
note:
Do not use Vertical Molding in a
horizontal application.
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
SIZES
REVEAL
DEPTH
NUMBER
NOM. 3 / 8 "
FCP-VERTICAL
www.fryreglet.com
| 9
A.5
PRODUCT DETAIL
INSTALLATION DETAIL
/
Cross Section
VERTICAL
RETAINER
Metal or Wood
Framing
2 3/4"
3/8"
Wall Sheathing
Weather
Resistive
Barrier
5/16" Fiber Cement Panel
Vertical Retainer
INSTALLATION DETAIL
/
ISO View
usage
Fry Reglet FCP Vertical Retainer acts as the
Metal or Wood
Framing
receiver for a Vertical Insert, Vertical Offset
or Vertical Lap Insert. This allows for an easy
Wall Sheathing
panel installation with a reduced chance for
material damage.
guide specification
Where indicated on drawings, Fry Reglet
Weather Resistive Barrier
Vertical Retainer, as manufactured by Fry
Reglet Corporation, shall be installed.
Vertical Retainer
Aluminum shall be extruded alloy 6063 T5,
with clear anodized finish.
note:
Do not use Vertical Retainer in a
horizontal application.
SIZES
10 |
REVEAL
DEPTH
NUMBER
NOM. 3 / 8 "
FCP-VERT RET
www.fryreglet.com
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
ARCHITECTURAL METALS / TRIMS
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
A.6
VERTICAL
INSERT
Metal or Wood
Framing
3/8"
Wall Sheathing
1/2"
1/2"
11/2"
1/2"
Weather
Resistive
Barrier
5/16" Fiber Cement Panel
Vertical Retainer
Vertical Insert
INSTALLATION DETAIL
/
ISO View
usage
Fry Reglet FCP Vertical Insert creates an
attractive architectural reveal when used
in conjunction with the Fry Reglet Vertical
Retainer. This is ideal for usage with two
5/16" Fiber Cement Panels.
Metal or Wood
Framing
Wall Sheathing
guide specification
Where indicated on drawings, Fry Reglet
Vertical Insert, as manufactured by Fry
Reglet Corporation, shall be installed.
Weather
Resistive
Barrier
Aluminum shall be extruded alloy 6063 T5,
Vertical Retainer
Vertical Insert
with primed finish, clear anodized or other
specified finish. Refer to finish section.
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
SIZES
REVEAL
DEPTH
NUMBER
NOM. 3 / 8 "
FCP-VERT INSERT
www.fryreglet.com
| 11
A.7
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
VERTICAL
OFFSET
Metal or Wood
Framing
3/8"
3/4"
Wall Sheathing
Weather
Resistive
Barrier
1/2"
1/2"
1/2"
11/2"
Vertical Retainer
5/16" Fiber Cement Lap Siding
Vertical Offset
INSTALLATION DETAIL
/
ISO View
usage
Fry Reglet FCP Vertical Offset creates an
attractive architectural reveal when used
in conjunction with the Fry Reglet Vertical
Retainer. This is ideal for usage at the
transition from a single layer of panels to lap
Metal or Wood
Framing
Wall Sheathing
siding configuration.
guide specification
Where indicated on drawings, Fry Reglet
Water
Resistive
Barrier
Vertical Offset, as manufactured by Fry Reglet
Vertical Retainer
Vertical Offset
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with primed finish,
clear anodized or other specified finish. Refer
5/16" Fiber Cement Lap Siding
to finish section.
SIZES
12 |
REVEAL
DEPTH
REVEAL
DEPTH
NUMBER
NOM. 3 / 4 "
NOM. 3 / 8 "
FCP-VERT OFFSET
www.fryreglet.com
5/16" Fiber Cement Panel
ARCHITECTURAL METALS / TRIMS
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
A.8
VERTICAL
LAP
INSERT
Metal or Wood
Framing
Vertical Retainer
Water
Resistive
Barrier
Wall Sheathing
3/4"
1/2"
1/2"
11/2"
1/2"
usage
Fry Reglet FCP Vertical Lap Insert creates an
attractive architectural reveal when used in
conjunction with Fry Reglet Vertical Retainer.
5/16" Fiber Cement
Lap Siding
5/16" Fiber Cement
Lap Siding
Vertical Lap Insert
INSTALLATION DETAIL
Metal or Wood
Framing
This is ideal for all usage with lap siding.
/
ISO View
Wall Sheathing
guide specification
Vertical Retainer
Where indicated on drawings, Fry Reglet
Vertical Lap Insert, as manufactured by
Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5,
with primed finish, clear anodized or other
specified finish. Refer to finish section.
Weather Resistive Barrier
5/16" Fiber Cement
Lap Siding
5/16" Fiber Cement
Lap Siding
Vertical Lap Insert
SIZES
REVEAL
DEPTH
NUMBER
NOM. 3 / 4 "
FCP-VERT INS75
www.fryreglet.com
| 13
A.9
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
BASE
Weather Resistive Barrier
Wall Sheathing
Metal or Wood
Framing
5/16" Fiber Cement Panel
2"
3/8"
7°
1/2"
1/2"
Base Trim
usage
Fry Reglet FCP Base creates a continuous
INSTALLATION DETAIL
/
ISO View
horizontal ledge at the bottom of the Fiber
Cement Panels, covers the horizontal edges
at the bottom of the panel and is angled to
channel moisture out.
Metal or Wood
Framing
5/16" Fiber
Cement Panel
Wall Sheathing
guide specification
Where indicated on drawings, Fry Reglet
Base, as manufactured by Fry Reglet
Flashing Tape
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with primed finish,
clear anodized or other specified finish. Refer
Weather Resistive Barrier
to finish section.
Base Trim
SIZES
14 |
REVEAL
DEPTH
NUMBER
NOM. 3 / 8 "
FCP-BASE
www.fryreglet.com
ARCHITECTURAL METALS / TRIMS
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
A.10
HORIZONTAL
Metal or Wood
Framing
Flashing Tape
1 7/8"
1/2"
3°
1/2"
3/8"
Wall Sheathing
Horizontal
5/16" Fiber Cement Panel
Weather Resistive Barrier
usage
Fry Reglet FCP Horizontal creates an
INSTALLATION DETAIL
attractive reveal between horizontal ends of
/
ISO View
Metal or Wood
Framing
the Fiber Cement Panels. The profile shape
is angled to channel moisture out. Available
with notched ends to provide clean joinery
Fiber Cement Panel
with vertical members.
guide specification
Where indicated on drawings, Fry Reglet
Flashing Tape
Horizontal, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, with primed
Weather
Resistive
Barrier
finish, clear anodized or other specified
finish. Refer to finish section.
Horizontal
Wall Sheathing
5/16" Fiber Cement Panel
SIZES
REVEAL
DEPTH
NUMBER
NOM. 1 / 2 "
FCP-HOZ TRIM
www.fryreglet.com
| 15
A.11
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
HORIZONTAL
NOTCH
1/8"
1 3/8"
1 1/2"
5/16"
Horizontal
Notched
5/16"
INSTALLATION DETAIL
usage
/
ISO View
Fry Reglet FCP Horizontal Notch allows for
perfect alignment between vertical and horizontal
FCP Trim profiles and prevents gaps or offsets.
Available in 5' lengths opposite hand pairs.
Fiber Cement Panel
guide specification
Where indicated on drawings, Fry Reglet
Horizontal, as manufactured by Fry Reglet
Outside Corner
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with primed finish,
clear anodized or other specified finish. Refer to
finish section.
note:
To be used in a horizontal application only.
SIZES
16 |
REVEAL
DEPTH
NUMBER
NOM. 1 / 2 "
FCP-HOZ NOTCH
www.fryreglet.com
Horizontal
Notched
ARCHITECTURAL METALS / TRIMS
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
A.12
DOUBLE
HORIZONTAL
Metal or Wood
Framing
Flashing Tape
1/2"
2 3/8"
3°
3/8"
1/2"
1/2"
Wall Sheathing
Double
Horizontal
3/8"
Weather Resistive Barrier
5/16" Fiber Cement Panel
usage
Fry Reglet FCP Double Horizontal creates a
unique aesthetic, with a double reveal. Profile
INSTALLATION DETAIL
/
ISO View
Metal or Wood
Framing
shape is angled to channel moisture out.
guide specification
Where indicated on drawings, Fry Reglet
Double Horizontal, as manufactured by
5/16" Fiber Cement Panel
Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5,
with primed finish, clear anodized or other
specified finish. Refer to finish section.
Weather
Resistive
Barrier
Flashing Tape
Double Horizontal
Wall Sheathing
SIZES
REVEAL
DEPTH
NUMBER
NOM. 1 / 2 "
FCP-DBLHOZTRIM
5/16" Fiber Cement Panel
www.fryreglet.com
| 17
A.13
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
DRIP CAP /
DRIP CAP 875
Weather Resistive Barrier
5/16" Fiber Cement Panel
Flashing Tape
DIM. B
1/2"
3/8"
Drip Cap
DIM. A
usage
Fry Reglet FCP Drip Caps create an
attractive architectural reveal between
horizontal ends of Fiber Cement Panels and
the tops of doors and windows. Available in
1 1/2" and 7/8" horizontal dimensions. The
profile shape channels moisture out.
INSTALLATION DETAIL
/
ISO View
Weather Resistive Barrier
5/16" Fiber Cement Panel
Flashing Tape
guide specification
Where indicated on drawings, Fry Reglet
Drip Caps as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum
Drip Cap
shall be extruded alloy 6063 T5, with primed
finish, clear anodized or other specified
finish. Refer to finish section.
Window or
Door Header
SIZES
DIM. A
DIM. B
NUMBER
/ "
1 1/ 2"
FCP-DRIP CAP 875
1 1/ 2"
1 3/ 4"
FCP-DRIP CAP
7 8
18 |
www.fryreglet.com
ARCHITECTURAL METALS / TRIMS
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
A.14
INSIDE
CORNER
7/8"
1 3/8"
Metal or Wood
Framing
1/2"
Inside Corner
7/8"
5/16" Fiber Cement Panel
Weather Resistive Barrier
1/2"
usage
Fry Reglet FCP Inside Corner creates a square
and true termination point for Fiber Cement
Panels at an Inside Corner, with minimal
extrusion exposed for a clean aesthetic.
INSTALLATION DETAIL
/
ISO View
Metal or Wood
Framing
guide specification
Where indicated on drawings, Fry Reglet
Inside Corner, as manufactured by Fry Reglet
Wall Sheathing
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with primed finish,
clear anodized or other specified finish. Refer
to finish section.
Water
Resistive Barrier
5/16" Fiber Cement Panel
Inside Corner
5/16" Fiber Cement Panel
SIZES
REVEAL
DEPTH
/ "
1 2
NUMBER
FCP-INSIDE CNR
www.fryreglet.com
| 19
A.15
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
INTEGRAL
INSIDE CORNER
1 3/4"
Metal or Wood
Framing
3/8"
1 3/4"
Wall Sheathing
Integral Inside Corner
3/8"
3/8"
usage
Fry Reglet FCP Integral Inside Corner creates
a traditional corner shape for Fiber Cement
Panels, the trim design eliminates the need to
miter cut the panels, while also mitigating the
5/16" Fiber
Cement Panel
Weather Resistive Barrier
INSTALLATION DETAIL
/
ISO View
Metal or Wood
Framing
possibility of panel bow.
Wall Sheathing
Water
Resistive
Barrier
guide specification
Where indicated on drawings, Fry Reglet
Integral Inside Corner, as manufactured by
Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5, with
primed finish, clear anodized or other specified
finish. Refer to finish section.
SIZES
REVEAL
DEPTH
/ "
3 8
20 |
www.fryreglet.com
NUMBER
FCP-INTISCNR
Integral Inside Corner
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
ARCHITECTURAL METALS / TRIMS
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
A.16
INSIDE
CORNER
TRANSITION
Metal or Wood
Framing
2 1/2"
Weather Resistive Barrier
3/4"
2 1/2"
5/16" Fiber Cement Lap Siding
3/8"
3/8"
Inside Corner Transition
3/8"
5/16" Fiber Cement Panel
Wall Sheathing
usage
Fry Reglet FCP Inside Corner Transition creates a
traditional corner shape and provides a seamless
INSTALLATION DETAIL
/
ISO View
transition between lap and panel siding.
Metal or Wood
Framing
guide specification
Where indicated on drawings, Fry Reglet Inside
Corner Transition, as manufactured by Fry
Reglet Corporation, shall be installed. Aluminum
Wall Sheathing
shall be extruded alloy 6063 T5, with primed
finish, clear anodized or other specified finish.
Refer to finish section.
Inside Corner Transition
5/16" Fiber Cement Lap Siding
Weather
Resistive
Barrier
5/16" Fiber Cement Panel
SIZES
REVEAL
DEPTH
/ "
3 8
NUMBER
FCP-I/SCRNTR
www.fryreglet.com
| 21
A.17
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
INTEGRAL
INSIDE
LAP
CORNER
Metal or Wood
Framing
2"
3/4"
3/4"
3/8"
2"
Integral Inside Corner
Wall Sheathing
5/16" Fiber Cement Lap Siding
Water Resistive Barrier
usage
Fry Reglet FCP Integral Inside Lap Corner
creates a straight and true, abuse resistant
inside corner with exposed flanges that cover
INSTALLATION DETAIL
/
ISO View
Metal or Wood
Framing
the vertical ends of the Fiber Cement Panel.
Wall Sheathing
guide specification
Where indicated on drawings, Fry Reglet Integral
Inside Lap Corner, as manufactured by Fry
Weather
Resistive
Barrier
Reglet Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, with primed
finish, clear anodized or other specified finish.
Refer to finish section.
Integral Inside Lap Corner
5/16" Fiber Cement Lap Siding
SIZES
REVEAL
DEPTH
/ "
3 4
22 |
www.fryreglet.com
NUMBER
FCP-I/SCNR750
5/16" Fiber Cement Lap Siding
ARCHITECTURAL METALS / TRIMS
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
A.18
OUTSIDE
CORNER
Metal or Wood
Framing
1
5/8"
Wall Sheathing
3/8"
3/8"
Weather Resistive Barrier
3/8"
3/8"
1
Outside Corner
5/16" Fiber Cement Panel
5/8"
INSTALLATION DETAIL
usage
Fry Reglet FCP Outside Corner creates a straight
/
ISO View
Metal or Wood
Framing
and true, abuse resistant corner with exposed
flanges that cover the vertical ends of the Fiber
Cement Panels.
guide specification
Where indicated on drawings, Fry Reglet
Outside Corner, as manufactured by Fry Reglet
Wall
Sheathing
Weather
Resistive
Barrier
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with primed finish,
clear anodized or other specified finish. Refer to
finish section.
5/16" Fiber Cement Panel
5/16" Fiber Cement Panel
Outside Corner
SIZES
REVEAL
DEPTH
NUMBER
NOM. 3 / 8 "
FCP-OUTSIDE CNR
www.fryreglet.com
| 23
A.19
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
BULLNOSE
OUTSIDE
CORNER
Weather
Resistive
Barrier
Wall Sheathing
3/8"
Metal or Wood
Framing
2"
3/8"
2"
5/16" Fiber Cement Panel
Bullnose Outside Corner
INSTALLATION DETAIL
usage
Fry Reglet FCP Bullnose Outside Corner
creates a straight and true, abuse resistant
rounded corner with exposed flanges that
cover the vertical ends of the Fiber Cement
Panel. The shape eliminates the need for
panels to be miter cut, while also mitigating
the possibility of panel bow.
guide specification
Where indicated on drawings, Fry Reglet
/
ISO View
Metal Framing
Wall Sheathing
Weather
Resistive
Barrier
Bullnose Outside Corner, as manufactured
by Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5,
5/16" Fiber Cement Panel
with primed finish, clear anodized or other
specified finish. Refer to finish section.
SIZES
24 |
REVEAL
DEPTH
NUMBER
NOM. 3 / 8 "
FCP-BULLNOSE
www.fryreglet.com
Bullnose Outside
Corner
5/16" Fiber Cement Panel
ARCHITECTURAL METALS / TRIMS
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
A.20
OUTSIDE
CORNER
TRANSITION
Metal or Wood
Framing
5/16" Fiber
Cement Panel
Wall Sheathing
1 3/4"
Weather Resistive Barrier
3/8"
3/8"
3/4"
3/8"
Outside Corner
Transition
2"
5/16" Fiber Cement Lap Siding
INSTALLATION DETAIL
usage
/
ISO View
Fry Reglet FCP Outside Corner Transition
creates a straight and true, abuse resistant
corner with exposed flanges that cover the
vertical ends of the Fiber Cement Panels.
Metal or Wood
Framing
Wall
Sheathing
guide specification
Where indicated on drawings, Fry Reglet
Outside Corner Transition, as manufactured
by Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5, with
primed finish, clear anodized or other specified
Weather
Resistive
Barrier
finish. Refer to finish section.
5/16" Fiber Cement Panel
5/16" Fiber Cement Lap Siding
Outside Corner
Transition
SIZES
REVEAL
DEPTH
REVEAL
DEPTH
NUMBER
NOM. 3 / 8 "
NOM. 3 / 4 "
FCP-O/SCRNTR
www.fryreglet.com
| 25
A.21
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
INTEGRAL
OUTSIDE
CORNER
INTEGRAL
OUTSIDE
LAP
CORNER
Wall Sheathing
Water
Resistive
Barrier
DIM A.
Metal or Wood
Framing
DIM B.
Fiber Cement
Lap Siding
DIM A.
DIM B.
Integral
Outside
Corner
Fiber Cement
Lap Siding
INSTALLATION DETAIL
usage
/
ISO View
Fry Reglet FCP Integral Outside Lap Corner
creates a traditional corner shape for Fiber
Metal or Wood
Framing
Cement Panels. The trim design eliminates
the need to miter cut the panels, while also
mitigating the possibility of panel bow. Integral
Outside Lap Corner also provides a seamless
transition between lap and panel applications.
Wall Sheathing
Weather
Resistive
Barrier
guide specification
Where indicated on drawings, Fry Reglet
Integral Outside Corner or Integral Outside Lap
Corner as manufactured by Fry Reglet Corporation, shall be installed. Aluminum shall be extruded
alloy 6063 T5, with primed finish, clear anodized or
Fiber Cement Lap Siding
other specified finish. Refer to finish section.
SIZES
26 |
Integral Outside
Corner
DIM A
REVEAL
DEPTH
DIM B
REVEAL
DEPTH
NUMBER
NOM. 3 / 4 "
NOM. 2 3 / 8 "
FCP-INTO/SCNR750
NOM. 3 / 8 "
NOM. 1 3 / 4 "
FCP-INT OSCNR
www.fryreglet.com
Fiber Cement Lap Siding
ARCHITECTURAL METALS / TRIMS
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
A.22
X OUTSIDE
CORNER
LAP TRIM
Weather Resistive Barrier
Metal or Wood
Framing
1"
3/8"
1 7/8"
5/16" Fiber Cement
Lap Siding
Wall Sheathing
3/4"
3/4"
3/8"
X Outside Corner
Lap Trim
5/16" Fiber Cement
Lap Siding
INSTALLATION DETAIL
usage
/
ISO View
Fry Reglet FCP X Corner Lap Trim creates a
stepped edge at the right angle corner where
lap siding meets. The trim design eliminates
the need to miter cut the panels while also
mitigating the panel below.
Wall
Sheathing
Metal or Wood
Framing
Weather
Resistive
Barrier
guide specification
Where indicated on drawings, Fry Reglet
X Corner Lap Trim, as manufactured by
Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5, with
primed finish, clear anodized or other specified
finish. Refer to finish section.
5/16" Fiber Cement
Lap Siding
5/16" Fiber Cement
Lap Siding
X Outside Corner
Lap Trim
SIZES
REVEAL
DEPTH
NUMBER
NOM. 3 / 4 "
PXM7575
www.fryreglet.com
| 27
A.23
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
W INSIDE
CORNER
LAP TRIM
Metal or Wood
Framing
Wall Sheathing
Weather
Resistive
Barrier
3/4"
1
1/2"
FiberCement
Lap Siding
W Reveal
Molding
Fiber Cement
Lap Siding
3/4"
INSTALLATION DETAIL
usage
/
ISO View
Fry Reglet FCP W Inside Corner Lap Trim
provides a crisp reveal for Fiber Cement Panel
Metal or Wood
Framing
when installed in a lap style application.
guide specification
Where indicated on drawings, Fry Reglet
W Inside Corner Lap Trim as manufactured by
Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5,
Wall Sheathing
Weather
Resistive
Barrier
with primed finish, clear anodized or other
specified finish. Refer to finish section.
W Inside Corner
Lap Trim
Fiber Cement Lap Siding
SIZES
28 |
REVEAL
DEPTH
NUMBER
NOM. 3 / 4 "
WRM-75-75
www.fryreglet.com
Fiber Cement Lap Siding
ARCHITECTURAL METALS / TRIMS
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
A.24
J CHANNEL
LAP TRIM
Metal or Wood
Framing
1/2"
7/8"
1 3/8"
J Channel Lap Trim
Weather Resistive Barrier
Fiber Cement
Lap Siding
INSTALLATION DETAIL
usage
Fry Reglet FCP J Channel Lap Trim is a
/
ISO View
Metal or Wood
Framing
termination trim to cover the edge of the
Fiber Cement Panel at intersections with sills,
Weather
Resistive
Barrier
jambs and soffits. Can be used with vertical
and horizontal applications.
guide specification
Where indicated on drawings, Fry Reglet
J Channel Lap Trim as manufactured by
Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5,
Fiber Cement Lap Siding
with primed finish, clear anodized or other
specified finish. Refer to finish section.
note:
J Channel Lap Trim
Do not use J Channel Lap Trim with
short leg up.
SIZES
J DEPTH
NUMBER
NOM. / "
JAM-875
3 4
www.fryreglet.com
| 29
A.25
INSTALLATION DETAIL
PRODUCT DETAIL
/
Cross Section
F CHANNEL
LAP TRIM
Metal or Wood
Framing
Weather
Resistive
Barrier
2 1/4"
7/8"
15/16"
3/4"
F Channel LapTrim
Fiber Cement
Lap Siding
1/2"
Wall Sheathing
INSTALLATION DETAIL
usage
Fry Reglet FCP F Channel Lap Trim is a
sills, jambs and soffits. Can be used with vertical
ISO View
Metal or Wood
Framing
termination trim designed to cover the edges
of the Fiber Cement Panel at intersections with
/
Wall Sheathing
and horizontal applications.
Water
Resistive
Barrier
guide specification
Where indicated on drawings, Fry Reglet
F Reveal as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with primed finish,
Fiber Cement Lap Trim
clear anodized or other specified finish. Refer
to finish section.
note:
o not use F Channel Lap Trim with short
D
leg up.
SIZES
30 |
REVEAL
DEPTH
NUMBER
NOM. 3 / 4 "
FARM-875-875
www.fryreglet.com
F Channel
Lap Trim
ARCHITECTURAL METALS / TRIMS
FIBER CEMENT PANEL REVEAL FINISHES
AB.1
FINISHES
clear anodized finishes
powder paint
Anodizing is an electrochemical process in which
Fry Reglet Powder paint, applied over chemical
the aluminum is immersed in an acid solution
conversion coating and primer, provides durability
through which electric current is passed. Although
and beauty for most interior and exterior
a natural oxidation process commences when
applications. This finish is provided as the standard
bare, unfinished aluminum is exposed to air,
Fry Reglet paint finish.
producing the oxide film artificially creates a film
that is thicker, harder and more durable.
This factory applied, baked-on finish is available
at standard lead times in the colors shown and in
GENERAL NOTE CONCERNING ANODIZED FINISHES:
custom colors to match swatches provided.
Due to the nature of the anodizing process, shade
variations can be expected from one element to
prime finish
another. This inherent characteristic of the finish need
Fry Reglet Prime Paint is spray applied in the
be no problem if properly anticipated in the design.
factory and baked-on so that it serves as an ideal
base for finish painting in the field.
Artic White
Autumn Tan
Monterey Taupe
Mountain Sage
Boothbay Blue
Cobble Stone
Parkside Pine
Sail Cloth
Country Lane
Evening Blue
Sandstone Beige
Timber Bark
Harris Cream
Iron Gray
Traditional Red
Woodland Cream
Khaki Brown
Light Mist
Woodstock Brown
www.fryreglet.com
| 31
800-237-9773 | www.fryreglet.com