1. No category

www.balltransfer.com email: [email protected]
Why Settle For Less?...
When You Can Roll With The Best!
2965 Pittsburgh Road, Perryopolis, PA 15473
Phone: 724-736-0600 Fax: 724-736-8082
724-736-0600 PAGE 1
PAGE 1
Stud Mount Ball Transfers..................................................
These units are steel ball transfers with your choice of stud sizes.
Sealed and lubricated to prevent less entry of foreign material and
increase the life of the unit. The SMS unit in all stainless steel is
perfect for food processing plants and corrosive environments.
For non-marking applications the nylon ball units are ideal.
These medium duty units cavn be utilized ball up or ball down.
Foam Seal
19/64"
1" dia.
13/8"
13/32"
25/64"
1/8"
*No foam seal or lubrication in stainless steel.
11/16"
113/32"
13/4"
Part #
SMC 1/4
NSMC 1/4
SMS 1/4*
NSMS 1/4*
SMC 5/16
NSMC 5/16
SMS 5/16*
NSMS 5/16*
SMC 3/8
NSMC 3/8
SMS 3/8*
NSMS 3/8*
Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Carbon Steel
Nylon
Stainless Steel
Nylon
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Carbon Steel (zinc plated)
This unit can be utilized ball
up or ball down.
Load Capacity
75 lbs.
75 lbs.
125 lbs.
75 lbs.
75 lbs.
75 lbs.
125 lbs.
75 lbs.
75 lbs.
75 lbs.
125 lbs.
75 lbs.
Stud Size
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
9/32"
1" dia.
15/16"
117/32"
1 1/4"
5/16"
13/16"
113/32"
Part #
EHSMC
NEHSMC
EHSMS
NEHSMS
PAGE 1 Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Load Capacity
50 lbs.
50 lbs.
100 lbs.
50 lbs.
Units are available with any configuration of carbon steel, stainless steel and nylon.
13/4"
Stud Size
1/4-20
1/4-20
1/4-20
1/4-20
724-736-0600
..................................................Stud Mount Ball Transfers
155/64"
7/32"
7/16"
1" dia.
11/32"
117/32"
15/16"
213/32"
3/4"
7/8"
1 33/64"
This is a light duty unit that can be utilized ball up only.
Part #
LDSMC
NLDSMC
LDSMS
NLDSMS
Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Stud Size
1/4-20
1/4-20
1/4-20
1/4-20
This heavy duty stud mount unit is easy to install with the
3/8-16 stud. Unit can be utilized ball up or ball down.
2"
Foam
Seal
Load Capacity
65 lbs.
65 lbs.
100 lbs.
65 lbs.
19/64"
11/2" dia.
11/32"
23/64"
1"
25/16"
15/16"
35/16"
1"
211/16"
Part #
1-1/2 SMC
1-1/2 NSMC
1-1/2 SMS
1-1/2 NSMS
23/16"
Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
724-736-0600 Neoprene pads available to reduce shock,
vibration and noise.
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Load Capacity
250 lbs.
250 lbs.
350 lbs.
250 lbs.
Units are available with any configuration of carbon steel, stainless steel and nylon.
Stud Size
3/8-16
3/8-16
3/8-16
3/8-16
PAGE 2
Black Oxide Stud Mount Ball Transfers..............................
27/16"
23/16"
1" dia.
5/32"
27/16"
2
23/16"
This ball transfer unit of carbon steel is intended only
as a basic guide for caster or ball transfer selection.
Transfers can be used ball up, ball down or at any
angle. Product can be pop riveted.
11/8" dia.
3/16"
11/2"
23/16"
1
27/16"
7/32"
5/32"
3/8"
1" dia.
11/8"
11/4" dia.
11/16"
5/32"
1 15/32"
15/6"
13/32"
11/32"
119/32"
2
11/8" dia.
1
5/16"
PAGE 3 111/32"
1/4"
27/16"
11/16"
11/16"
Part #
BD-R-SMC 3/8
1-1/8 BD-R-SMC 3/8
1 1/4 BD-R-SMC 3/8
13/4"
11/4" dia.
Ball Material
Carbon Steel
Carbon Steel
Carbon Steel
Housing
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Load Capacity
150 lbs.
200 lbs.
250 lbs.
Stud Size
3/8-16
3/8-16
3/8-16
724-736-0600
..............................Black Oxide Stud Mount Ball Transfers
17/32"
The LSC is designed with a smaller outside diameter for multiple unit
installation. These medium duty units can be utilized ball up only.
23/64"
1
11/16"
1" dia.
1/64"
13/8"
5/16"
Not available in stainless steel.
11/16"
Manufactured with a nylon seal and a welded stud.
15/64"
Part #
LSC 5/16
NLSC 5/16
LPC
NLPC
Ball Material
Carbon Steel
Nylon
Carbon Steel
Nylon
Housing
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Stud Size
5/16-18
5/16-18
No Stud
No Stud
115/32"
No Seal
1 / "
15 64
No Seal
Load Capacity
65 lbs.
65 lbs.
65 lbs.
65 lbs.
5/16"
9/32"
1" dia.
11/32"
13/4"
11/4" dia.
127/64"
1
5/32"
1
7/16"
2
13/16"
111/16"
1/8"
13/32"
9/16"
15/16"
11/16"
115/64"
1"
Designed for multiple unit installation,
these heavy duty, versatile ball transfers
are engineered for ball up, ball down or any
angle mounting.
Part #
HSC 1/4
NHSC 1/4
HSC 5/16
NHSC 5/16
1-1/4 HSC
1-1/4 NHSC
Ball Material
Carbon Steel
Nylon
Carbon Steel
Nylon
Carbon Steel
Nylon
724-736-0600 Housing
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Not available in stainless steel.
Units are manufactured with a
welded stud.
Load Capacity
150 lbs.
75 lbs.
100 lbs.
75 lbs.
250 lbs.
250 lbs.
Stud Size
1/4-20
1/4-20
5/16-18
5/16-18
3/8-16
3/8-16
PAGE 4
Machined Stud Mount Ball Transfers..................................
This miniature stud mount unit
is constructed of solid CNC
machined, case hardened carbon
steel with a stamped carbon steel
top cover.
2.6 mm
(.104)
17.5 mm
(.689")
5.2 mm
12.4 mm
dia.
(.49")
(.205")
12.3 mm
(.484")
36.8 mm
(1.449")
19.3 mm
(.76")
22.1 mm
(.87")
Part #
12 MSMC
12 NMSMC
12 MSMS
12 NMSMS
Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Load Capacity
65 lbs.
65 lbs.
100 lbs.
65 lbs.
Stud Size
1/4-20
1/4-20
1/4-20
1/4-20
This medium duty stud mount unit is constructed of solid CNC machined, case hardened carbon steel with a
stamped carbon steel top cover.
31.55 mm
(1.242")
3.8 mm
9.4 mm (.150")
(.37")
5.18 mm
15.88 mm
dia.
( 5/8")
(.204")
4.22 mm
(.166")
11.6 mm
(.457")
21 mm
(.827")
40.3 mm
(1.587")
19.3 mm
(.76")
23.9 mm
(.94")
Part #
15 MSMC
15 NMSMC
15 MSMS
15 NMSMS
PAGE 5 Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Load Capacity
130 lbs.
130 lbs.
200 lbs.
130 lbs.
Units are available with any configuration of carbon steel, stainless steel and nylon.
Stud Size
1/4-20
1/4-20
1/4-20
1/4-20
724-736-0600
..................................Machined Stud Mount Ball Transfers
This heavy duty stud mount unit is constructed of
solid CNC machined, case hardened carbon steel with
a stamped carbon steel top cover. This unit utilizes an
13.97 mm
oiled felt sealing system.
(.55")
Felt
Seal
45 mm
(1.772")
5.7 mm
(.225")
8.89 mm
(.35")
25.4 mm
dia.
(1")
5.08 mm
(.2")
17.78 mm
31.75 mm
(1.25")
(.7")
50.8 mm
(2")
19.05 mm
(.75")
37.95 mm
(1.494")
Part #
25 MSMC
25 NMSMC
25 MSMS
25 NMSMS
Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Load Capacity
440 lbs.
440 lbs.
550 lbs.
440 lbs
Stud Size
5/16-18
5/16-18
5/16-18
5/16-18
53.6 mm
(2.11")
50.01 mm
(1.969")
30.17 mm
dia.
(.329")
(1 3/16")
Felt
Seal
43.92 mm
75.41 mm
6.09 mm
(.24")
14.45 mm
(.569")
8.36 mm
(1.729")
(2.969")
35.56 mm
(1.4")
25.4 mm
(1")
44.78 mm
(1.763")
This heavy duty stud mount unit is constructed of solid CNC machined, case hardened carbon steel with a
machined carbon steel top cover. This unit utilizes an oiled felt sealing system and is easily installed with its
3/8-16 stud.
Part #
30 MSMC
30 NMSMC
30 MSMS
30 NMSMS
724-736-0600 Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Load Capacity
770 lbs.
770 lbs.
970 lbs.
770 lbs
Units are available with any configuration of carbon steel, stainless steel and nylon.
Stud Size
3/8-16
3/8-16
3/8-16
3/8-16
PAGE 6
Flange Mount Ball Transfers...............................................
This unit has a two-hole flange base for easy mounting. Hardened ball
cup and sealed protective cover permit low torque and long life.
This unit can be utilized ball up or ball down.
7/32" Hole Dia.
2 Holes
21/64"
211/64"
15/8"
Seal
9/32"
1" dia.
13/16"
29/32"
23/4"
Units are available with any configuration of carbon steel, stainless steel and nylon.
Part #
FMC
NFMC
FMS
NFMS
Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Load Capacity
75 lbs.
75 lbs.
125 lbs.
75 lbs.
19/16"
19/16"
111/16"
5/32"
5/32"
11/16" dia.
1" dia.
111/16"
2"
27/16"
22""
3/32"
3/16"
11/16" dia.
11/16"
115/64"
1"
9/32"
This unit has a two-hole flange base for easy mounting. This unit
can be utilized ball up, ball down or at any angle.
PAGE 7 19/32"
1" dia.
13/16"
Part #
11/16 OB-FMC
OB-FMC
27/16"
Ball Material
Carbon Steel
Carbon Steel
1"
1"
Housing
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Load Capacity
90 lbs.
135 lbs.
724-736-0600
................................................Flange Mount Ball Transfer
This ball transfer unit of carbon steel component is
intended only as a basic guide for caster or ball transfer
selection. Transfers can be used ball up, ball down or at
any angle. Product can be pop riveted.
Part #
BD-R-FMC
1-1/8 BD-R-FMC
1 1/4 BD-R-FMC
724-736-0600 Ball Material
Carbon Steel
Carbon Steel
Carbon Steel
Housing
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
/
5
Load Capacity
135 lbs.
180 lbs.
225 lbs.
PAGE 8
Flange Mount Ball Transfers...............................................
This heavy duty unit has a four-hole flange to facilitate easy installation. *The nylon seal prevents entry of dirt and
foreign matter while removable armored protective cover provides ultimate protection against damage. This unit
can be utilized ball up only.
17/64"
215/32"
3"
square
9/32" Hole Dia.
4 Holes
11/32"
23/4" Nylon Seal
11/2" dia.
113/16"
115/32"
1/8" radius
Neoprene pads available to reduce
shock, vibration and noise.
Part #
*1-1/2 FMC
*1-1/2 NFMC
*1-1/2 FMS
*1-1/2 NFMS
1-1/2 EFMC
1-1/2 NEFMC
1-1/2 EFMS
1-1/2 NEFMS
PAGE 9 Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Units are available with any configuration of carbon steel, stainless steel and nylon.
Load Capacity
250 lbs.
250 lbs.
350 lbs.
250 lbs.
250 lbs.
250 lbs.
350 lbs.
250 lbs.
724-736-0600
................................Machined Press Mount Ball Transfers
5.1 mm
(.11")
(.2")
12.5 mm
(.49")
22 mm
(.87")
This miniature press mount unit is constructed of solid CNC machined, case hardened carbon steel with a stamped
carbon steel top cover.
Part #
12 MPC
12 NMPC
12 MPS
12 NMPS
Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Load Capacity
65 lbs.
65 lbs.
100 lbs.
65 lbs.
31.5 mm
(1.24")
9.5 mm
(.37")
3.8 mm
(.150")
5.2 mm
(.20")
15.88 mm
dia.
( 5/8")
4.3 mm
(.17")
11.5 mm
(.45")
21 mm
(.83")
24 mm
(.94")
This press mount unit is constructed of solid CNC machined, case hardened carbon
steel with a stamped carbon steel top cover and a self-cleaning hole.
Part #
15 MPC
15 NMPC
15 MPS
15 NMPS
724-736-0600 Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Load Capacity
130 lbs.
130 lbs.
200 lbs.
130 lbs.
Units are available with any configuration of carbon steel, stainless steel and nylon.
PAGE 10
Machined Press Mount Ball Transfers................................
This press mount unit is constructed of solid CNC
machined, case hardened carbon steel with a stamped
carbon steel top cover and a self-cleaning hole.
*No felt seal or lubrication in stainless steel.
5.7 mm
(.225")
dia.
1
Seal
Part #
25 MPC
25 NMPC
25 MPS*
25 NMPS*
Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
37.1
Load Capacity
440 lbs.
440 lbs.
550 lbs.
440 lbs.
dia.
1 3/16
Seal
This press mount unit is constructed of solid CNC machined, case hardened
carbon steel with a machined carbon steel top cover. This unit utilizes an oiled felt
sealing system and a self-cleaning hole for optimal performance.
*No felt seal or lubrication in stainless steel.
Part #
30 MPC
30 NMPC
30 MPS*
30 NMPS*
PAGE 11 Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Units are available with any configuration of carbon steel, stainless steel and nylon.
Load Capacity
770 lbs.
770 lbs.
970 lbs.
770 lbs.
724-736-0600
................................Machined Press Mount Ball Transfers
This press mount unit is constructed of solid CNC machined, case hardened carbon steel
with a machined carbon steel top cover. This unit utilizes an oiled felt sealing system and
a self-cleaning hole for optimal performance.
*No felt seal or lubrication in stainless steel.
dia.
1 3/4
Part #
45 MPC
45 NMPC
45 MPS*
45 NMPS*
Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Seal
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Load Capacity
1325 lbs.
1325 lbs.
1575 lbs.
1325 lbs.
..............................................Round Mount Ball Transfers
Foam
Seal
15/8"
9/32"
1" dia.
13/16"
29/32"
These medium duty units can be utilized ball up or ball down.
*No foam seal or lubrication in stainless steel.
Part #
RMC
NRMC
RMS*
NRMS*
724-736-0600 Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
2"
Load Capacity
75 lbs.
75 lbs.
125 lbs.
75 lbs.
Units are available with any configuration of carbon steel, stainless steel and nylon.
PAGE 12
Countersunk Flange Mount Ball Transfer (Round).............
123/32"
15/16”
1" dia.
11/16" dia.
5/32"
1/8"
9/16"
47/64"
31/32"
17/32"
3/16"
11/16" dia.
9/16"
3/4"
5/16"
15/16"
11/4"
5/32"
3/4"
This is a low profile unit and
is easy to install. Unit can be
utilized ball up, ball down or
at any angle.
11/16"
1" dia.
3/16"
31/32"
2"
1
1/8"
dia.
11/16"
11/4" dia.
5/32"
5/32"
113/16”
27/32"
25/32"
15/16"
13/32"
11/32"
11/8" dia.
27/32"
115/32"
13/16"
1
11/2"
29/32"
11/4" dia.
3/8"
3/16"
3/16"
31/32"
Part #
11/16 CS-R-FMC
CS-R-FMC
1 1/8 CS-R-FMC
1 1/4 CS-R-FMC
PAGE 13 15/16"
Ball Material
Carbon Steel
Carbon Steel
Carbon Steel
Carbon Steel
31/32"
Housing
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Load Capacity
90 lbs.
135 lbs.
180 lbs.
225lbs.
724-736-0600
.............Countersunk Flange Mount Ball Transfer (Square)
1/8"
11/16"
11/16" dia.
15/16"
31/32"
1
7/32"
15/16"
This ball transfer unit of carbon steel is intended only
as a basic guide for caster or ball transfer selection.
Transfers can be used ball up, ball down or at any angle.
Product can be pop riveted.
3/16"
3/4"
11/16"dia.
9/16"
29/32"
5/32"
11/16"
5/32"
5/32"
13/8"
1/8"
1/8dia.
11
”
13/8"
1 ”
1"dia.
1"
1"
1/8
1
3/4"
1
13/4"
17/32"
3/8"
1
13/8"
"
19/64
11/32"
13/16"
5/16"
11/16"
11/4"
11/8"dia.
1"dia.
3/4"
1
3/16"
3/16"
31/32"
31/32"
Part #
11/16 CS-S-FMC
CS-S-FMC
1-1/8 CS-S-FMC
724-736-0600 27/32"
3/8"
Ball Material
Carbon Steel
Carbon Steel
Carbon Steel
Housing
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Black Oxide Finished Carbon Steel
Load Capacity
90 lbs.
135 lbs.
180 lbs.
PAGE 14
Disk Mount Ball Transfers..................................................
This is a low profile unit and is easy to install. Unit can be utilized ball up or ball down. Bolt down cover is
available for stability.
* 5/8 DMC- No nylon seal.
13/8"
3/16"
25/64"
3/32"
5/8" dia.
3/4"
13/64"
7/64"
23/64"
Nylon
Seal
141/64"
1/4"
19/32"
19/16"
7/32"
1" dia.
1/8"
19/32"
155/64"
Part #
5/8 DMC *
5/8 NDMC *
5/8 DMS *
5/8 NDMS *
DMC
NDMC
DMS
NDMS
PAGE 15 Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Units are available with any configuration of carbon steel, stainless steel and nylon.
Load Capacity
40 lbs.
40 lbs.
75 lbs.
40 lbs.
75 lbs.
75 lbs.
125 lbs.
75 lbs.
724-736-0600
..............................................................Disk Mount Cover
1/4"
2"
21/2"
19/64"
11/2"
21/2"
33/32"
21/64"
3/4"
The DMC bolt down
cover allows the ball
transfer unit to stay
in place when uneven
material is pulled across.
1/4" Dia.
2 Holes
5/8"
Dia.
.04"
9/32"
5/8 DMC Cover Item Numbers:
55269 - Carbon Steel
55269S - Stainless Steel
1/4" Dia.
63/64"
3/8"
DMC Cover Item Numbers:
55270 - Carbon Steel
55270S - Stainless Steel
.................................Bolt Down Disk Mount Ball Transfers
23/16"
bolt circle
2 holes
.23" diameter
2.879"
2.6"
.644"
Foam
Seal
.24"
.185"
.15"
1" dia.
.07" dia.
thru hole
Part #
BD-DMC
BD-NDMC
BD-DMS *
BD-NDMS *
724-736-0600 .604"
1.179"
This medium duty unit is one of our new products. The unit
has a foam seal to prevent the entry of foreign materials.
This bolt down unit is a great low profile ball transfer. It is
easy to install and great for moving uneven material.
*No foam seal or lubrication in stainless steel.
2.6"
Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Load Capacity
75 lbs.
75 lbs.
125 lbs.
75 lbs.
Units are available with any configuration of carbon steel, stainless steel and nylon.
PAGE 16
Spring Loaded Ball Transfers.............................................
1 13/64"
15/64"
29/64"
1 29/64"
This unit has a preloaded 65 lb. spring that allows for a
1/4” vertical ball deflection built into the sealed, selfcontained unit. The molded nylon seal prevents entry of
dust. This unit has a press fit for easy drop-in installation.
7/32
1" dia.
3/8"
1"
5/8"
1 11/16"
1 15/16"
Part #
SLC
Ball Material
Carbon Steel
Housing
Carbon Steel (zinc plated)
Load Capacity
65 lbs.
223/32"
bolt circle
3 holes
3/16" diameter
120° apart
This unit has a preloaded 65 lb. spring that allows for
a 1/4” vertical ball deflection built into the sealed, selfcontained unit. The molded nylon seal prevents entry of
dust. The 3-hole flange allows for easy installation.
3 1/8"
Part #
FSLC
NFSLC
FSLS
NFSLS
PAGE 17 Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
29/64"
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc
plated)
1 15/32
"
Stainless Steel
Stainless Steel
17/64"
Units are available with any configuration of carbon steel, stainless steel and nylon.
Load Capacity
65 lbs.
65 lbs.
65 lbs.
65 lbs.
1" dia.
Nylon Sea
1 11/16"724-736-0600
2 /64"
3 /64"
..................................................Pipe Mount Ball Transfers
5/16"
1"
11/2" dia.
Foam
Seal
5/16"
11/2" dia.
1"
31/16"
39/16"
21/16"
29/16"
2.24"
23/4"
2.24"
2
3/4"
Carbon Steel
Stainless Steel
This standard 2 inch NPT pipe mount unit provides support without hindering the operator’s movements. When
this unit is used in front of shears or press brakes it provides more accurate positioning than casters. Hardened ball
and cup provide durability. Also available with a nylon main ball to prevent material marking.
*No foam seal or lubrication in stainless steel.
Part #
1-1/2 PMC
1-1/2 NPMC
1-1/2 PMS *
1-1/2 NPMS *
Ball Material
Carbon Steel
Nylon
Stainless Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Stainless Steel
Stainless Steel
Load Capacity
250 lbs.
175 lbs.
350 lbs.
175 lbs.
Standard 2” pipe with press mount unit. Constructed of solid CNC machined carbon steel. When used in front of
shears or press brakes, this unit provides more accurate positioning than casters. The oiled felt system keeps the
ball lubricated and the self-cleaning hole allows dirt and debris to pass through. Available with a nylon main ball
to prevent material marking.
Part #
45 MPC-PMC
45 NMPC-PMC
724-736-0600 Ball Material
Carbon Steel
Nylon
Housing
Carbon Steel (zinc plated)
Carbon Steel (zinc plated)
Load Capacity
1325 lbs.
1325lbs.
Units are available with any configuration of carbon steel, stainless steel and nylon.
PAGE 18
www.balltransfer.com
Email: [email protected]
2965 Pittsburgh Road
Perryopolis, PA 15473
Phone: 724-736-0600
Fax: 724-736-8082
Owner: Robert McKeown
Marketing & Sales Manager: Brynda D. Gordon
EMERGENCY STOP NEEDS
CREATIVE INDUSTRIAL SYSTEMS, INC.
2965 Pittsburgh Road | Perryopolis, PA 15473 | P: 724-736-2500 | F: 724-736-8082
www.creativeindustrialsystems.com
Email: [email protected]
Let Creative Industrial Systems help you with all your conveyor needs. Be a
part of our success and receive complete customer satisfaction.
Our staff is knowledgeable & always happy to assist you with your application.
CIS has a huge stock of Honeywell E-stops, Switches, Momentary Pulls, etc.
Owner: Robert McKeown
Marketing & Sales Manager: Brynda D. Gordon
PAGE 19 724-736-0600