1. No category

Milan Veljkovic
Short Curriculum Vitae
Name:
Born:
Nationality:
Civil status:
Address:
Milan Veljkovic
27 June 1959, Sarajevo, Bosnia and Hercegovina
Swedish
Married since 1985,
two children born 1987 and 1994
Stormvägen 94, 97634 Luleå
Education:






Classic gymnasium,
Graduated civil engineer, 4.5 year graduate studies.
University in Sarajevo, Bosnia and Hercegovina
Postgraduate study , two years M.Sc studies,
Universitetet in Zagreb, Croatia
PhD, after five years postgraduate studies at
Luleå University of Technology
Docent in Steel Structures, Luleå University of Technology
Professor of Steel Structure
1974-1978
1978-1983
1985-1988
1991-1996
2003
2007
Employment:







Assistant of Professor ("doctoral student")
Div. of Steel Structures, Dep. of Civil Engineering,
University in Sarajevo
Research Engineer
Institute for Structures and Materials,
University in Sarajevo
Research Engineer, Div. of Steel Structures,
Luleå University of Technology
Doctoral student,
Luleå University of Technology
Lecturer, Division of Steel Structures,
Luleå University of Technology
Senior Lecturer, Division of Steel Structures,
Luleå University of Technology
Professor and Head of Steel Structure
Luleå University of Technology
1985-1991
1987-1990
1991-1993
1994-1996
1997-2003
2003-2007
2007-
1
Milan Veljkovic
Positions at Luleå University of Technology





Member of the board of Civil Engineering Department
Responsible of a research school
Innovative technology and management,
Director of Centre for Risk analysis and Risk Management
Responsible for Program for Fire Protection Engineers
Manager of Steel Structure Research Group
2000-2002
2003-2005
20052005-2014
2005-
Academic, Scientific and Technical Committees

ECCS TWG7.6 Design for composite construction with cold formed steel members,
member
1994-1997
 ECCS TC 10, Structural connections,
member
since 2003
 ECCS TWG G 8.3 Plate buckling,
member
since 2005
 ESTEP, European Steel Technological Platform, WG3 Construction
member
since 2006
 ECCS, European Convention of Constructional Steelwork
vice-chairman of Technical Management Board
2009-2013
chairman of Technical Management Board
since 2013
ECCS, Management Working Group
since 2009
 JVTC, Luleå Railway Research Center
Member of the board
since 2012
 SBI, The Swedish Institute of Steel Construction
Member of the board (supleant)
since 2007
 Member of Swedish Technical Committee for Standardisation, TK188 and TK203;
 Member of European Standardization committee CEN250/SC3 Steel Structures;
Standardization committee CEN250/SC4 Composite Structures,
Journals:
Reviewer of a couple of dozens of journal papers in following journals:
Steel and Composite Structures,
Engineering Structures,
Journal of Structural Engineering,
Advanced Steel Construction, an International Journal,
Journal of Constructional Steel Research.
The Arabian Journal for Science and Engineering
Journal of Wind Engineering & Industrial Aerodynamics
Member of editorial boards of International Journals:
Advanced Steel Construction, an International Journal,
Journal of Constructional Steel Research, Elsevier Ltd.,
Steel Construction Journal, John Wiley,
Magazine of Civil Engineering, scientific and applied edition.
2
Milan Veljkovic
Evaluator of research projects






Evaluator of research proposals for Swedish Rescue Service Agency,
2004, 2006,
Czech Science Foundation, Reviewer of an Application for Standard Grant
Project, 2006
Project evaluation of grant applications submitted to the Research Council of
Norway, 2012
The Research Fund for Coal and Steel (RFCS) is managed by the European
Commission, Directorate-General for Research and Innovation, Directorate G
(Industrial technologies), Unit G.5.sals, 2009-2013
The European Research Council Advanced Grant, 2012
Research Executive Agency (REA) European Commission, evaluation of the
proposals submitted in response to the - H2020-LCE-2014-1
Engagement in international conferences, selection

Steel Companies-Universities Joint Conference, Working together for Growth and
Jobs, Warsaw 26-27 April 2007,
Member of Scientific Committee

4th International Conference on Steel and Composite Structures, 2010
Member of Scientific Committee

Eurosteel Conference, 2008, 2011. 2014
Member of Scientific Committee

International Conference on Steel Bridges (ICSB) 2008, 2015
Member of Scientific Committee

The Nordic Steel Construction Conference, 2009, 2012, 2015
Member of Scientific Committee

The Nordic Steel Construction Conference, 2015
Key note speaker

International Conference Applications of Structural Fire Engineering, 2009
Member of Scientific Committee

International Scientific Conference and Workshop METNET, 2014
Member of Scientific Committee

International Conference on Thin Walled Structures, 2011
Member of Scientific Committee
3
Milan Veljkovic

The 8th International Conference on Advances in Steel Structures, 2015
Member of Scientific Committee

Composite Construction in Steel and Concrete, 2008, 2013
Reviewer
Engagement in recent International Projects, selection
Coordinator of following projects:
1. HISTWIN, High-Strength Steel Tower for Wind Turbine, RFSR-CT-200600031, 2006-2009
Total Budget 1,5 mil Euro
Luleå University of Technology, budget 326 k Euro
Beneficiaries:,
Rheinisch Westfälische Technische Hochschule Aachen (RWTH), Germany
Germanischer Lloyd Industrial Services Gmb(GL-WIND), Germany
Aristotle University of Thessaloniki (AUTH) - Greece
Repower Portugal Equipamentos Eólicos SA, (REPOWER) Portugal
University of Coimbra, Faculty of Science and Technology, (FCTUC)Portugal
Rautaruukki Oyj, (RUUKKI) Finland
This project is chosen in “Selection of coal and steel projects funded by the RFCS over the
last 10 years, European Coal & Steel Research, Progress to Innovation
ftp://ftp.cordis.europa.eu/pub/coal-steel-rtd/docs/RFCS_Success_Stories.pdf
Final report: Veljkovic, M. , et all 2012 High-strength tower in steel for wind turbines
(Histwin): Final Report
Brussels: European Commission. (EUR Scientific and Technical Research series).
2. HISTWIN2 High steel tubular towers for wind turbines, RFSR-CT-201000031, 2010-2013
Total Budget 1,2 mil Euro
Luleå University of Technology, budget 108 k Euro
Beneficiaries:,
Rheinisch Westfälische Technische Hochschule Aachen (RWTH), Germany
Aristotle University of Thessaloniki (AUTH) - Greece
Rautaruukki Oyj, (RUUKKI) Finland
Martifer Energia – Equip. para a Energia, SA (Martifer) Portugal
University of Coimbra, Faculty of Science and Technology, (FCTUC) Portugal
The final report submitted.
4
Milan Veljkovic
3. HISTWIN+, High-Strength Steel Tower for Wind Turbine, RFS2-CT-201400023, 2014-2015
Total Budget 478 kEuro
Luleå University of Technology, budget 345 kEuro
Beneficiaries:,
Rheinisch Westfälische Technische Hochschule Aachen (RWTH), Germany
University of Coimbra, (UC) Portugal Portugal
Aristotle University of Thessaloniki (AUTH) - Greece
Europen Convencion for Construction Steelwork (ECCS) Belgium
Forschungsvereinigung Stahlanwendung e.V. (Fosta), Germany
4. FRAMEUP, Optimization of frames for effective assembling, RFSR-CT2011-00035, 2011-2014
Total Budget 1,6 mil Euro
Luleå University of Technology, budget 343 k Euro
Beneficiaries:,
Universite de Liege, Liege, (ULGG), Belgium
Acciona Infraestructuras SA, Alcobendas (Madrid), (ACCIONA),Spain
Universidade de Coimbra, Coimbra, (UC)Portugal
Part Construction AB, Kalix, (PARTAB) Sweden
Rheinisch Westfälische Technische Hochschule Aachen, (RWTH) Germany
Vallourec Deutschland GmbH, Düsseldorf, (VAD) Germany
The final report in preperation.
5. AEOLUS4FUTURE, H2020-MSCA-ITN-2014, Innovative Training
Networks (ITN), Marie Sklodovska-Curie Actions, 2015-2019
Total Budget 3,8 mil Euro
Beneficiaries:
University of Birmingham, UK
University of Coimbra, Portugal
University of Florence, Italy
Eindhoven University of Technology, The Netherlands
von Karman Institute, Belgium
Ruhr-Universitaet Bochum, Germany
Leibniz Universität Hannover, Germany
Siemens Industry Software NV, germany
SENVION, Germanu
Partner Organization
Universiuty of Belgrade, Serbia
Ss. Cyril and Methodiys University – Skopje, FROM
ANSYS, Inc., France
Germanischer Lloyd Industrial Services GmbH, Germany
MARTIFER SA, Portugal
5
Milan Veljkovic
Partner in following projects:
6. COMPFIRE, Design of joints to composite columns for improved fire
robustness, RFSR-CT-2009-00021 (2009-2012)
Total Budget 1,8 mil Euro
Luleå University of Technology, budget 205 k Euro
Coordinator:
Faculdade de Ciências e Tecnologia da Universidade de Coimbra, “FCTUCOIMBRA”,
Portugal
Beneficiaries:
Luleå University of Technology, “TULUL”, Sweden
Czech Technical University in Prague, “CTU”, Czech Republic
The University of Sheffield, “USFD”, United Kingdom
The University of Manchester, “UMNC”, United Kingdom
Desmo a.s., “DESMO”, Czech Republic
Tata Steel UK LTD, “TATAUK”, United Kingdom
Final report: Silva et all: Design of composite joints for improved fire robustness
(COMPFIRE), 2014 Brussels: European Commission. (EUR Scientific and Technical
Research series).
7. RINGMAN, Offshore Wind Turbine Towers A Quicker, Cheaper Flange
Supply Route (2011-2014), Grant agreement for: Research for the benefit of
specific groups, Grant agreement no: 286603
Total Budget 1,1 mil Euro
Luleå University of Technology, budget 387 k Euro
Coordinator
SANBORN AS, Czech Republic
Beneficiaries:
AQUASIUM TECHNOLOGY LTD, United Kingdom
FORJAS IRAETA HEAVY INDUSTRY SL, Spain
INETEC-INSTITUT ZA NUKLEARNU TEHNOLOGIJU, Croatia
LULEA TEKNISKA UNIVERSITET, Sweden, RTD Performer
TWI LIMITED, United Kingdom, RTD Performer
VESTAS WIND SYSTEMS A/S, Denmark
8. HILONG, High Strength Long Span Structures RFS-PR-11032, 20122015
Total Budget 1,6 mil Euro
Luleå University of Technology, budget 313 k Euro
Coordinator
The Steel Construction Institute (SCI) United Kingdom
6
Milan Veljkovic
Beneficiaries:
University of Coimbra (UC), Portugal
Luleå University of Technology (LTU), Sweden
University of Birmingham (UofB), United Kingdom
Imperial College of Science, Technology & Medicine (Imperial), United Kingdom
Sweco Structures AB (Sweco), Sweden
S-Squared Corporation Pty Ltd (S-Squared), Australia
Vallourec Deutschland GmbH, Germany
9. RUOSTE, RUles On high Strength STEel, RFSR-CT-2012-00036, 20122015
Total Budget 1,6 mil Euro
Luleå University of Technology, budget 132 k Euro
Coordinator
RWTH Rheinisch Westfälische Technische Hochschule Aachen, Germany
Beneficiaries:
AU Aarhus Universitet, Danmark
LUT Lappeenranta University of Technology, Finland
LTU Luleå University of Technology, Sweden
TUT Tampere University of Technnology, Finland,
Ruukki Rautaruukki Oyj, Finland
SSAB SSAB EMEA, Sweden
Voest Voestalpine Krems GmbH, Austria
BME Budapesti Müszaki és Gazdaságtudományi Egyetem, Hungary
10. Erasmus Mundus Master Course- 520121-1-2011-1-CZ-ERA MUNDUSEMMC: Sustainable Constructions under Natural Hazards and
Catastrophic Events, 2012-2015
The degree awarded is a Master Degree, provided as a multiple diploma. The MSc has
duration of three semesters and is held on a rotating basis among partners. Coursework is
concentrated in two countries and dissertation work is divided between all partners. Students
may spend one term in one country and the coursework part of the second term in a second
country. The dissertation can be carried out at any of the six partner countries.
Coordinator:
Czech Technical University in Prague - CTU,
Beneficiaries
University of Coimbra - UC, Portugal,
Luleå University of Technology - LTU, Sweden,
Politehnica” University of Timisoara - PUT, Romania,
University of Naples “Federico II” - UNINA, Italy,
University of Liège - ULg, Belgium
7
Milan Veljkovic
Research networks:

COST Action C25
Sustainability of Constructions: Integrated Approach to Life-time
Structural Engineering, 2006-2010
Member of Management Committee,
Chairman of WG2: Life cycle functional performance

COST Action C26
Urban Habitat Constructions under Catastrophic Events, 2006-1010
Member of Management Committee,
Member of WG1: Fire Design

Cost Action TU0904
Integrated Fire Engineering and Response, 2009-2013
Member of WG2: Structural Safety

Cost action TU1304
Wind energy technology reconsideration to enhance the concept of
smart cities, 2013-2017
Member of Management Committee,
Chairman of WG2: Life cycle functional performance
The teaching activity:
Graduate studies (examiner):





Applied FEM, S7001B since 1996
Steel Structures, S7004B since 2006
Fire protection in buildings, S0004B since 2007
Design of structures exposed to fire, S7006B since 2011
Design for renewable energy systems, S7007B since 2012

Guest Lectures:
 Structural Materials, since 2006
 Architecture and Aesthetics of Structures, since 2005
8
Milan Veljkovic
Post-graduate courses

Applied FEM, 1998-2010, online course http://cygni.anl.luth.se, (the server is out of
operation since 2010).
The course is provided as support for research projects and since 2010 is provided
with help of senior PhD students of the Steel Structure.
Examiner: Milan Veljkovic

Theory of Stability of Steel Structures, 2000, (use of FEA in solving stability
problems) the course was prepared by Prof. B. Johansson, LTU and Prof. T.
Höglund KTH,

Stability of Steel Structures, 2005/06, responsible for a part regarding FEA of
stability of steel structures (Swedish course for doctoral students)
Examiner: Prof. P.Collin

Advance Steel Structures, 2007, 2010, 2014 (The Swedish course for doctoral
students, co-operation between LTU, KTH, LTH and Chalmers)
Examiner: Milan Veljkovic
9
Milan Veljkovic
Advisor activities, selection
Supervisor of Ph.D. Projects
 Peter Karlström, 2003-2005,
Research project: Calculation rules of Lightweight steel sections in
fire situation, ECCS 7210 PR 254 2000-2003
Licentiat Thesis Thin-walled steel studs in fire: analysis and
design recommendations 2005
 Martin Nilsson, 2005-2008
Project: Bridges with Integral Abutments,
RFCS Project, RFS-PR-04120, 2005-2008
Licentiat Thesis: Evaluation of in-situ measurements of
composite bridge with integral abutments 2005
 Wylliam Husson, 2006-2009
Project: High Stregth Steel Tower for Wind Turbines,
RFCS project, RFSR-CT-2006-00031, 2006-2009
Licentiat Thesis Friction connections with slotted holes for wind
towers 2008
 Jörgen Eriksen, 2008-2012
Project: Valorisation of Knowledge for Competitive Steel and
Composite Bridges
 Maroune Limam 2008-2011
Project: High Strength Steel Tower for Wind Turbines,
RFCS project, RFSR-CT-2006-00031, 2006-2009
Licentiat Thesis FE Modelling of Friction Connections in Tubular
Tower for Wind Turbines 2011
 Olga Lucia Garzon Barragan, 2008-2013
Project: Use of High Strength Steel in High Towers for Wind
Turbines, Centre for High Performance Steel
Licentiat Thesis Resistance of polygonal cross-sections:
application on steel towers for wind turbines 2012
 Christine (Ottenstreuer) Heisteramann, 2008-2014
Projects: High Strength Steel Tower for Wind Turbines, Histwin2,
Friction connection with long open slotted holes in high-strength
tubular towers (2012-2013) CHS2
Licentiat Thesis: Behaviour of pretensioned bolts in friction
connections: towards the use of higher strength steels in wind
towers 2012
Doctoral Thesis: Resistance of Friction Connections with Open
Slotted Holes in Towers for Wind Turbines 2014
10
Milan Veljkovic
 Tim Heistermann, 2008-2013
Project: Temperature distribution and remaining resistance of steel
structural elements, Nordic Safety and security
Doctoral Thesis: Stiffness of reverse channel connections at room
and elevated temperatures 2013

Marko Pavlovic, external PhD student
Project: the Serbian Ministry of Education, Science and
Technological Development through the TR-36048 project
Doctoral Thesis: Resistance of Bolted Shear Connectors in
Prefabricated Steel-Concrete Composite Decks, 2013

Naveed Iqbal, 2010Project: COMPFIRE, Design of joints to composite columns for
improved fire robustness, 2009-2012
Licentiat Thesis: Restrained behaviour of beams in steel frames
exposed to fire 2013

Pedro Andrade, 2011-2014
Project: FRAMEUP, Optimization of frames for effective
assembling, RFSR-CT-2011-00035, 2011-2014
Licentiat Thesis: Innovative Construction of Student Residences:
Frameup Concept 2014

Anh Tuan Tran, 2012
Project: High Strength Steel Tower for Wind Turbines, Histwin2
Licentiat Thesis: Resistance of Circular and Polygonal Steel
Towers for Wind Turbines: Down scale component experiments
and Finite element analysis 2014

Pourya Noury, 2012Project: RINGMAN, Offshore Wind Turbine Towers A
Quicker, Cheaper Flange Supply Route, 2011-2014
Commissioned researched for Trafikverket, 2014-2015
Licentiat Thesis: Fracture Mechanics in Design and Assessment
of Existing Structures: Two Case Studies 2014
Co-supervisor of Ph.D. Projects
 Anders Ranby, 1996-1998
Project supported by Swedish Fire Research Board and Swedish
companies
Licentiat Thesis: Structural fire design of thin walled steel
sections 1999
11
Milan Veljkovic
 Björn Uppfeldt, 2006-2012
Project: Stainless Steel in Fire
RFCS project, RFS-CR-04048, 2004-2007
Licentiat Thesis: Stainless steel box columns in fire: analysis and
design recommendations, 2012
 Alexandra Byström, 2010Project: Nordic Safety and Security
Licentiat Thesis: Fire temperature development in enclosures:
Some theoretical and experimental studies, 2013
 Joakim Sandström, 2010Project: Nordic Safety and Security
Licentiat Thesis: Thermal boundary conditions based on field
modeling of fires: Heat transfer calculations in CFD and FE models
with special regards to fire exposure represented with adiabatic
surface temperatures, 2013
Host at Luleå University of Technology for Youn-Ju Jeong PhD. Student, Korea Institute of
Construction Technology and scientific consultancy in period 9-31 October 2003
Host for Mostafa Fahmi Hassanein PhD student at Division of Structural Engineering,
Department of Civil Engineering at Tanta University, Egypt in period April-June 2007
Host for Monika Chuda-Kowalska PhD student at Poznan University of Technology, June
2012
Host for João Ribeiro PhD student at Coimbra University, exchange program COST
TU0904, STSM , June 2012
Host for Post Doc studies of Dr. Xudong Cheng from State Key Laboratory of Fire Science,
University of Science and Technology of China, Hefei, Anhui, P.R.China, November 2010February 2012
Host for Nafsika Stavridou PhD student at Aristotle University of Thessaloniki (AUTH)
Greece, January–June 2013.
Host for Filip Rehor PhD student at Czech Technical University in Prague - CTU, Erasmus
exchange programme, February to May 2014.
12
Milan Veljkovic
Supervisor of Master of Science Thesis (the final graduation work), selection:



















Vulcan, Davide, Behaviour of axially loaded thin walled steel column
with partially closed cross section, 2003,
The work was awarded by The Steel Construction Institute as The
best MSc thesis in 2005 in Sweden in the field of Steel Structures
Zanella, Eros, Resistance of poligonal thin walled column eccentrically
loaded, 2003
Bro, Markus: Westberg, Marie, Influence of fatigue on headed stud
connectors in composite bridges , 2004
Cremer, Matthias, Stabilisation of light-weight shear walls with double
plasterboards, 2004
Blanch Piera, Georgina, Behaviour of longitudinally stiffened plates
under uniform compression, 2004
Allan Hammer Jeppesen, An alternative connection in steel towers for
wind turbines , 2008
Stefan Golling, Stress concentration at the door opening of steel towers
for
wind turbines 2009
Marta Pascual Gavaldà, Xavi Octavio Bayón, Affordable house with
intensive use of steel , 2009
Peter Olsson, 3D FE Analys av korttidsmätningar hos samverkansbro med
integrerade landfästen över Leduån , 2010
João Ricardo de Melo Pinheiro, Assessment of the Life Cycle
Environmental Performance of Buildings: A Case Study, 2011
Filipe Manuel Garcia de Campos Coelho, Assessment of the Life Cycle
Environmental Performance of Buildings: A Case Study 2011
Pedro Andrade, Structural Assessment and Optimization of the Modular
System of a Student Residential Building in Luleå and Coimbra:
Affordable Houses Project, 2011
Märta Jonsson, Terese Kjällén, Motstånd i u-profil i rumstemperatur och i
förhöjd temperatur: Finita element analys ,2012
Lars-Olof Björkstad, Single storey steel building exposed to fire: An
integrated approach for analytical evaluation of steel structures exposed to
fire, 2012
Josep Pigem Rodeja, Sustainability Assessment of Towers for Wind
Turbines, 2012
Johan Rönnblom, Brand i hallbyggnad: En studie i FDS och Evac, 2013
Vaidas Alechnavicius, Jozsef Balint, Long Span High Strength Steel
Trusses, 2014
Jakub Dolezal, Maksym Podgayskyy, Resistance of Cold-Formed LColumns Made of High Strength Steel, 2014
Therese Samuelsson, Olov Sundström, Fire Resistance in Externally
Insulated Steel Plate Modules, 2014
13
Milan Veljkovic
PUBLICATIONS
(report from the LTU library system)
15
En rapport skapad i Pure, sammanställd av Milan Veljkovic ([email protected]), 29/12/14 11:45
Publikationer
Lista över Publikationer
Ordnad efter: Utgivningsdatum
2015
Connections in towers for wind turbines, Part I: Evaluation of down-scaled experiments
Pavlovic, M., Heistermann, C., Veljkovic, M., Pak, D., Feldmann, M., Rebelo, C. & Simões da Silva, L. 2015 i : Journal of
Constructional Steel Research.
Publikation: Forskning - peer-review › Tidskriftsartikel
Connections in towers for wind turbines, Part II: The friction connection behaviour
Pavlovic, M., Heistermann, C., Veljkovic, M., Pak, D., Feldmann, M., Rebelo, C. & Simões da Silva, L. 2015 i : Journal of
Constructional Steel Research.
Publikation: Forskning - peer-review › Tidskriftsartikel
Friction connection vs. ring flange connection in steel towers for wind converters
Pavlovic, M., Heistermann, C., Veljkovic, M., Pak, D., Feldmann, M., Rebelo, C. & Simões da Silva, L. 2015 i :
Engineering Structures.
Publikation: Forskning - peer-review › Tidskriftsartikel
2014
Design and execution of a 3D modular building
Andrade, P., Veljkovic, M., Feldmann, M., Pak, D., Pyschny, D. & Lundholm, J. 10 sep 2014 Eurosteel 2014: 7th
European Conference on Steel and Composite Structures. Landolfo, R. & Mazzolani, F. M. (red.). Brussels, Belgium:
European Convention for Constructional Steelwork, ECCS, Kap. 2. Fabrication and erection, s. 103-104 2 s.
Publikation: Forskning - peer-review › Abstract i konferenspublikation/proceedings
Finite Element Analysis of Lap Joints in Steel Tubular Towers
Heistermann, C., Pavlovic, M., Andrade, P., Veljkovic, M., Rebelo, C. & da Silva, L. S. 10 sep 2014 Eurosteel 2014: 7th
European Conference on Steel and Composite Structures. Landolfo, R. & Mazzolani, F. M. (red.). Brussels, Belgium:
European Convention for Constructional Steelwork, ECCS, Kap. 6. Connections, s. 291-292 2 s.
Publikation: Forskning - peer-review › Abstract i konferenspublikation/proceedings
Influence of Geometrical Imperfections on Analyses of Door Openings in Tubular Steel Towers for Wind
Turbines.
Tran, A. T., Veljkovic, M., Rebelo, C. & da Silva, L. S. 10 sep 2014 Eurosteel 2014: 7th European conference on Steel
and Composite Structures, Naples, Italy, 10-12 September 2014.. 7 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
1
The Crocodile Nose Connection: An Aesthetically Appealing Joint for CHS
Manoleas, P., Koltsakis, E. & Veljkovic, M. 10 sep 2014 Eurosteel 2014: 7th European Confernce on Steel and
Composite Structures. Landolfo, R. & M. Mazzolani, F. (red.). Brussels, Belgium: European Convention for
Constructional Steelwork, ECCS, s. 65-66 2 s.
Publikation: Forskning - peer-review › Abstract i konferenspublikation/proceedings
Large scale test on a steel column exposed to localized fire
Byström, A., Sjöström, J., Wickström, U., Lange, D. & Veljkovic, M. 17 jun 2014 i : Journal of Structural Fire Engineering.
5, 2, s. 147-160 14 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Assessment of environmental influence on fatigue crack growth in an Electron Beam (EB) welded flange
connection
Noury, P., Pavlovic, M., Möller, M. & Veljkovic, M. 24 jan 2014
Publikation: Forskning - peer-review › Poster
Flangeless Connections in Steel Tubular Wind Towers
Heistermann, C., Tran, A. T., Veljkovic, M. & Rebelo, C. jan 2014 Proceedings of the METNET Seminar 2013 in Luleå:
Metnet Annual Seminar in Luleå, Sweden, on 22 - 23 October 2013. Virdi, K. & Tenhunen, L. (red.). Hämeenlinna: HAMK
University of Applied Science, s. 157-168 12 s.
Publikation: Forskning › Artikel i konferenspublikation/proceedings
Assessment of environmental influence on fatigue crack growth in an Electron Beam (EB) welded flange
connection
Noury, P., Pavlovic, M., Möller, M. & Veljkovic, M. 2014
Publikation: Forskning - peer-review › Poster
Behaviour of prestressed bolts on overlapping friction steel connections for tubular wind towers
Matos, R., Rebelo, C., Simões da Silva, L. & Veljkovic, M. 2014
Publikation: Forskning - peer-review › Konferensbidrag
Comparative life cycle assessment of tubular wind towers and foundations: Part 1: Structural design
Rebelo, C., Moura, A., Gervásio, H., Veljkovic, M. & Luis Simões da Silva, L. X. 2014 i : Engineering Structures. 74, s.
283-291 9 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Comparative life cycle assessment of tubular wind towers and foundations: Part 2: Life cycle analysis
Gervásio, H., Rebelo, C., Moura, A., Veljkovic, M. & Simões da Silva, L. 2014 i : Engineering Structures. 74, s. 292-299 8
s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Influence of execution tolerances for friction connections in circular and polygonal towers for wind converters
Heistermann, C., Pavlovic, M., Veljkovic, M., Pak, D., Feldmann, M., Rebelo, C. & Simões da Silva, L. 2014 i : Advanced
Steel Construction.
Publikation: Forskning - peer-review › Tidskriftsartikel
2
Recent research of shear connection in prefabricated steel-concrete composite beams
Pavlović, M., Spremic, M., Markovic, Z., Buđevac, D. & Veljkovic, M. 2014 i : Journal of Applied Engineering Science. 12,
1, s. 75-80 6 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
2013
Experimental behaviour of the reverse channel joint component at elevated and ambient temperatures
Lopes, F., Santiago, A., Simões da Silva, L., Heistermann, T., Veljkovic, M. & Guilherme da Silva, J. 16 okt 2013 i :
International Journal of Steel Structures. 13, 3, s. 459-472 14 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Assessment and monitoring of a student residential building using an innovative execution solution
Andrade, P., Monteiro, S., Gervásio, H. & Veljkovic, M. okt 2013 Proceedings of SB13 Portugal: Contribution of
Sustainable Building to Meet EU 20-20-20 Targets. Bragança, L., Mateus, R. & Pinheiro, M. (red.). Guimarães, Portugal,
Kap. 5, s. 403-410 8 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
A method for post-processing of finite element analyses to assess critical macroscopic voids
Noury, P., Unosson, M. & Veljkovic, M. 3 sep 2013 Computational Plasticity XII: Fundamentals and Applications Proceedings of the 12th International Conference on Computational Plasticity - Fundamentals and Applications,
COMPLAS 2013. Barcelona, s. 1026-1035 10 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Resistance of Door Opening in Towers for Wind Turbines
Tran, A. T., Veljkovic, M., Rebelo, C. & Simoes da Silva, L. 12 jun 2013 SEECCM III: 3rd South-East European
Conference on Computational Mechanicsan an ECCOMAS and IACM Special Interest Conference. Papadrakakis, M.,
Kojic, M., Tuncer, I. & Papadopoulos, V. (red.). s. 312-324 13 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Bolted shear connectors vs. headed studs behaviour in push-out tests
Pavlović, M., Marković, Z., Veljkovic, M. & Buđevac, D. 2013 i : Journal of Constructional Steel Research. 88, s. 134–149
16 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Design of slip resistant lap joints with long open slotted holes
Heistermann, C., Veljkovic, M., Simões, R., Rebelo, C. & Simões da Silva, L. 2013 i : Journal of Constructional Steel
Research. 82, s. 223–233 11 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Limit Analysis Interaction Formulae for Thin-Walled and Moderately Thick-Walled Pipes Subjected to Pressure
and Pipe Bending
Möller, M., Hallin, L. & Veljkovic, M. 2013 ASME 2013 Pressure Vessels and Piping Conference: July 14-18, 2013, Paris,
France. New York: American Society of Mechanical Engineers, Vol. 3: Design and analysis, 7 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
3
Measurement and calculation of adiabatic surface temperature in a full-scale compartment fire experiment
Byström, A., Cheng, X., Wickström, U. & Veljkovic, M. 2013 i : Journal of Fire Sciences. 31, 1, s. 35-50 16 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Push-out experiments of headed shear studs in group arrangements
Spremic, M., Markovic, Z., Veljkovic, M. & Budjevac, D. 2013 i : Advanced Steel Construction. 9, 2, s. 139-160 22 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
2012
Bolts for slip resistant joints in towers for wind turbines
Heistermann, C. & Veljkovic, M. dec 2012 Proceedings of the METNET Seminar 2012 in Izmir: Metnet Annual Seminar in
Izmir, Turkey, on 10 - 11 October 2012. Virdi, K. & Tenhunen, L. (red.). Hämeenlinna, Finland: HAMK University of
Applied Science, Kap. New Steels and Bolted Connections, s. 31-39 9 s.
Publikation: Forskning › Artikel i konferenspublikation/proceedings
Finite element analysis of a single shear lap joint connection
Limam, M., Heistermann, C. & Veljkovic, M. 6 sep 2012 Nordic Steel Construction Conference 2012: September 5-7,
2012 Oslo, Norway : Proceedings. Oslo: Norwegian Steel Association, 8 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Full-scale experimental and numerical studies on compartment fire under low ambient temperature
Byström, A., Cheng, X., Wickström, U. & Veljkovic, M. maj 2012 i : Building and Environment. 51, s. 255-262 8 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
A comparison of the fatigue behavior between S355 and S690 steel grades
de Jesus, A. M. P., Matos, R., Fontoura, B. F. C., Rabelo, C., da Silva, L. S. & Veljkovic, M. 2012 i : Journal of
Constructional Steel Research. 79, s. 140-150 11 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
A steel column exposed to localized fire
Byström, A., Sjöström, J., Wickström, U. & Veljkovic, M. 2012 Nordic Steel Construction Conference 2012: September 57, 2012 Oslo, Norway : Proceedings. Norwegian Steel Association, s. 401-410 10 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Behaviour of the reverse channel joint component at elevated temperature
Lopes, F., Santiago, A., Simões da Silva, L., Heistermann, T., Veljkovic, M. & da Silva, . J. G. S. 2012 Tubular Structures
XIV: proceedings of the 14th internatinal symposium on tubular structures, London, UK, 12-14 September 2012.
Gardher, L. (red.). London: CRC Press, s. 645-651 7 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Economic and durable design of composite bridges with integral abutments (INTAB+)
Feldmann, M., Naumes, J., Pak, D., Veljkovic, M., Eriksen, J., Popa, N., Hechler, O. & Seidl, G. 2012 Luxembourg:
European Commission. 107 s. (EUR Scientific and Technical Research series).
Publikation: Forskning - peer-review › Rapport
4
Finite element analysis of a single lap joint
Heistermann, C., Heistermann, T., Limam, M. & Veljkovic, M. 2012 Nordic Steel Construction Conference 2012:
September 5-7, 2012 Oslo, Norway : Proceedings. Oslo: Norwegian Steel Association, s. 673-682 10 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
High-strength tower in steel for wind turbines (Histwin): Final report
Veljkovic, M. , Heistermann, C. , Husson, W. , Limam, M. , Feldmann, M. , Naumes, J. , Pak, D. , Faber, T. , Klose, M. ,
Fruhner, K-U. , Krutschinna, L. , Baniotopoulos, C. , Lavasas, I. , Pontes, A. , Ribeiro, E. , Hadden, M. , Sousa, R. , da
Silva, L. , Rebelo, C. , Simoes, R. , Henriques, J. & 3 andra Matos, R., Nuutinen, J. & Kinnunen, H. 2012 Brussells:
European Commission. 168 s. (EUR Scientific and Technical Research series).
Publikation: Forskning - peer-review › Rapport
International workshop on new fire safety regulations for single storey building and on-going projects
Veljkovic, M. (red.) & Uppfeldt, B. (red.) 2012 Luleå: Luleå tekniska universitet. 230 s. (Technical report / Luleå University
of Technology).
Publikation: Forskning › Rapport
Large scale test to explore thermal exposure of column exposed to localized fire
Byström, A., Sjöström, J., Wickström, U. & Veljkovic, M. 2012 Proceedings of the 7th International Conference on
Structures in Fire. Fontana, M., Frangi, A. & Knobloch, M. (red.). Zurich: ETH Zurich, Institute of Structural Engineering,
s. 185-194 10 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Piezo-impedance transducers for residual fatigue life assessment of bolted steel joints
Bhalla, S., Vittal, P. A. & Veljkovic, M. 2012 i : Structural Health Monitoring. 11, 6, s. 733–750 18 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Structural monitoring of a wind turbine steel tower: Part I: System description and calibration
Rebelo, C., Veljkovic, M., Da Silva, L. S., Simoes, R. & Henriques, J. 2012 i : Wind & Structures. 15, 4, s. 285-299 15 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Structural monitoring of a wind turbine steel tower: Part II: monitoring results
Rebelo, C., Veljkovic, M., Matos, R. & Simões da Silva , L. 2012 i : Wind & Structures. 15, 4, s. 301-311 11 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Structural monitoring of a wind turbine steel tower
Rebelo, C., Simoes, R., Matos, R., Simoes da Silva, L., Veljkovic, M. & Pircher, M. 2012 Experimental mechanics : new
trends and perspectives: proceedings of the 15th International Conerence on Experimental Mechanics ; Porto, Portugal,
22 - 27 July 2012.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Thermal analysis of a pool fire test in a steel container
Cheng, X., Byström, A., Wickström, U. & Veljkovic, M. 2012 i : Journal of Fire Sciences. 30, 2, s. 170-184 15 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
5
2011
Analysis of a column friction connection using high strength bolts
Limam, M. & Veljkovic, M. dec 2011
Publikation: Forskning - peer-review › Konferensbidrag
Loss of pretension in bolted connections: influence of loading
Heistermann, C. & Veljkovic, M. sep 2011 Proceedings of the 6th European Conference on Steel and Composite
Structures : Eurosteel 2011, August 31 - September 2, 2011, Budapest, Hungary. Budapest: European Convention for
Constructional Steelwork, ECCS, s. 399-404 6 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Modeling three dimensional friction connection for wind towers using finite element methods
Limam, M., Veljkovic, M., Bernspång, L., Rebelo, C. & Simoes da silva, L. sep 2011 Proceedings of the 6th European
Conference on Steel and Composite Structures : Eurosteel 2011, August 31 - September 2, 2011, Budapest, Hungary.
Budapest : European Convention for Constructional Steelwork, ECCS
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Use of plate thermometers for better estimate of fire development
Byström, A., Wickström, U. & Veljkovic, M. 27 jul 2011 Performance, Protection and Strengthening of Structures under
Extreme Loading. Cadoni, E. & di Prisco, M. (red.). Trans Tech Publications, s. 362-367 6 s. (Applied Mechanics and
Materials; Nr 82).
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Design Guide: Dimensionering av ekonomiska och långsiktigt hållbara samverkansbroar med integrerade
landfästen.
Andersson, J. & Veljkovic, M. 11 jun 2011 75 s.
Publikation: Forskning › Rapport
Prediction of temperature variation in an experimental building
Cheng, X., Veljkovic, M., Byström, A., Iqbal, N., Sandström, J. & Wickström, U. 29 apr 2011 Proceedings of International
Conference Applications of Structural Fire Engineering: Prague, 29 April 2011. s. 387-392 6 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
A study of an axially compressed cold-formed folded plate
Garzon, O., Heistermann, T. & Veljkovic, M. 2011 Proceedings of the 6th International Conference on Thin-Walled
Structures: Recent Research Advances and Trends. Timisoara, s. 297-304 8 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Avaliação da Resistência à Fadiga de Ligações por Atrito em Aço Estrutural de Alta Resistência S690
Fontoura, B., Matos, R., Jesus Abílio, . M. P., Rebelo, C., Simões da Silva, L. & Veljkovic, M. 2011 Construção Metálica
e Mista VIII. Simões da Silva, L., Cruz, P., Lopes, N., Almeida Fernandes, J. & Batista, A. (red.). Lissabon: CMM Press,
s. 191-200 10 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
6
Fatigue behavior of steel friction connections: experimental and numerical results
Matos, R., Fontoura, B., Rebelo, C., De Jesus, A., Veljkovic, M. & Simoes da Silva, L. 2011 Proceedings of the 6th
European Conference on Steel and Composite Structures: Eurosteel 2011, August 31 - September 2, 2011, Budapest,
Hungary. European Convention for Constructional Steelwork, ECCS
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
International Workshop Strengthening of Steel Bridges: Topics of relevance for the BRIFAG project
Collin, P. (red.), Nilsson, M. (red.) & Veljkovic, M. (red.) 2011 Luleå: Luleå tekniska universitet. 324 s. (Technical report /
Luleå University of Technology).
Publikation: Forskning › Rapport
Monitoring of a swedish integral abutment bridge
Pétursson, H., Collin, P., Andersson, J. & Veljkovic, M. 2011 i : Structural Engineering International. 21, 2, s. 175-180 6
s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Overview on eco-efficiency of constructions
Veljkovic, M., Koukkari, H., Borg, R. P., Stoian, V. & Plewako, Z. 2011 Summary report of the Cooperative Activities of
the Cost Action C25: Sustainability of Constructions. Integrated Approach Towards Sustainable Constructions. Vol. 1, s.
177-187 11 s.
Publikation: Forskning › Kapitel i rapport
Reverse channel connections at elevated temperature: finite element modelling
Heistermann, T., Iqbal, N., Veljkovic, M., Lopes, F., Santiago, A. & Simões da Silva, L. 2011 Proceedings of the 6th
European Conference on Steel and Composite Structures: Eurosteel 2011, August 31 - September 2, 2011, Budapest,
Hungary. Budapest: European Convention for Constructional Steelwork, ECCS, s. 1587-1592 6 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Summary report of the cooperative activities of the Cost Action C25: Sustainability of constructions. Integrated
approach towards sustainable constructions
Bragnaca, L. (red.), Koukkari, H. (red.), Blok, R. (red.), Gervasio, H. (red.), Veljkovic, M. (red.), Plewako, Z. (red.) & Borg,
R. P. (red.) 2011
Publikation: Forskning › Antologi
Travelling fires for CFD
Sandström, J., Cheng, X., Veljkovic, M., Wickström, U. & Heistermann, T. 2011 Fire safety science : proceedings of the
10th international symposium : [held at College Park, MD, 19-24 June 2011]. London: International Association for Fire
Safety Science, s. 1479-1488 10 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Utredning av skador på Fotbollshall i Skellefteå, 2010
Strömberg, J. & Veljkovic, M. 2011 Luleå: Luleå tekniska universitet. 234 s. (Teknisk rapport / Luleå tekniska universitet).
Publikation: Forskning › Rapport
7
Utredning av takras B-hallen, Luleå, 2010
Strömberg, J. & Veljkovic, M. 2011 Luleå: Luleå tekniska universitet. 96 s. (Teknisk rapport / Luleå tekniska universitet).
Publikation: Forskning › Rapport
2010
Economic and durable design of composite bridges with integral abutments
Feldmann, M., Naumes, J., Pak, D., Veljkovic, M., Nilsson, M., Eriksen, J., Collin, P., Kerokoski, O., Pétursson, H.,
Verstraete, M., Vroomen, C., Haller, M., Hechler, O. & Popa, N. 2010 Luxembourg: European Commission. 140 s.
Publikation: Forskning - peer-review › Rapport
Feasibility study of friction connection in tubular towers for wind turbines
Veljkovic, M., Limam, M., Heistermann, C., Rebelo, C. & Simoes da Silva, L. 2010 Steel structures: culture &
sustainability 2010: international symposium, Istanbul, 21 - 23 September 2010. Istanbul: Turkish Constructional
Steelwork Association, 8 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Friction connection in tubular towers for a wind turbine
Veljkovic, M., Feldmann, M., Nuames, J., Pak, D., Rebelo, C. & da Silva, L. S. 2010 i : Stahlbau. 79, 9, s. 660-668 9 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Inflation adjusted LCCA of a comparative study of an Integral abutment bridge and a Concrete bridge with
expansion joints
Iqbal, N., Gervasio, H., Eriksen, J., Veljkovic, M. & Simoes da Silva, L. 2010 Sustainable construction - a life cycle
approach in engineering: Proceedings, International Symposium Malta, 23 - 25 July 2010. COST Action C25. s. 151-161
11 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Remaining pretension force in friction connections
Heistermann, C., Heistermann, T. & Veljkovic, M. 2010 Proceedings of the 4th International Conference on Steel and
Composite Structures: 21 - 23 July 2010, Sydney, Australia. Uy, B. (red.). Singapore: Research Publishing Services, s.
275-278 6 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Structural, economic and environmental performance of fibre reinforced wood profiles vs. solutions made of
steel and concrete
Manthey, C., Guenther, E., Heiduschke, A., Haller, P., Heistermann, T., Veljkovic, M. & Hajek, P. 2010 Sustainable
Construction - A Life Cycle Approach in Engineering: Proceedings - International Symposium Malta, 23.-25. July 2010 :
COST Action C25. Bragan a, . red. . niversit of Malta, Facult for the Built Environment, s. 43-57 15 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Sustainable construction - a life cycle approach in engineering: Proceedings, International Symposium Malta, 23
- 25 July 2010. COST Action C25
Bragança, L. (red.), Koukkari, H. (red.), Veljkovic, M. (red.) & Borg, R. P. (red.) 2010 University of Malta, Faculty for the
Built Environment.
Publikation: Forskning › Antologi
8
Sustainable construction - a life cycle approach in engineering: International Training School, Malta, 26 July - 1
August 2010
Bragança, L. (red.), Koukkari, H. (red.), Veljkovic, M. (red.) & Borg, R. P. (red.) 2010 University of Malta, Faculty for the
Built Environment.
Publikation: Forskning › Antologi
Towards better understanding of a friction connection in tubular towers for wind turbines
Limam, M., Veljkovic, M., Pak, D. & Naumes , J. 2010 Proceedings of the 4th International Conference on Steel and
Composite Structures: 21 - 23 July 2010, Sydney, Australia . Uy, B. (red.). Singapore: Research Publishing Services, s.
507-512 6 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
2009
Adiabatic surface temperature: a sufficient input data for a thermal model
Sandström, J., Wickström, U. & Veljkovic, M. 2009 Application of Structural Fire Engineering: Proceedings of the
International Conference. Wald, F., Kallerová, P. & Chlouba, J. red. . České v soké učení technické v Praze Česká
technika – nakladatelství ČV T, s. 102 6 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Ensaios de fadiga de ligações metálicas por atrito para torres eólicas metálicas
Matos, R., Rebelo, C., Simoes, R., Silva, L. & Veljkovic, M. 2009 VII Congresso Construção Metálica e Mista - 19 e 20
Novembro de 2009. s. 479-490 11 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Flange connection vs. friction connection in towers for wind turbines
Heistermann, C., Husson, W. & Veljkovic, M. 2009
Stockholm: Stålbyggnadsinstitutet, s. 296-303 8 s. (Publikation / Stålbyggnadsinstitutet - SBI;
Nr 181).
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Guidelines for strengthening of railway bridges
Veljkovic, M. (red.), Elfgren, L., Täljsten, B., Carolin, A. & Eriksen, J. 2009 Proceedings of Workshop: COST Action C25 :
Sustainability of Constructions - Integrated Approach to Life-time Structural Engineering. Bragança, L. (red.). s. 141-145
5 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Improving transportation investment decision through life-cycle cost analysis: case study on some bridges in
the north of Sweden
Ditrani, M., Elfgren, L., Eriksen, J., Enochsson, O., Veljkovic, M., Andersson, P. & Eriksson, P. 2009 Sustainability of
Constructions - Integrated Approach to Life-time St
E
h W k h T ş
3-24
October 2009. COST Action C25. s. 266-275 9 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
9
Monitoring of a bridge with integral abutments
Eriksen, J., Veljkovic, M. & Nilsson, M. 2009 Proceedings of Workshop: COST Action C25 : Sustainability of
Constructions - Integrated Approach to Life-time Structural Engineering. s. 176-183 7 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Review of plate buckling rules in EN 1993-1-5
Johansson, B. & Veljkovic, M. 2009 i : Steel Construction - Design and Research. 2, 4, s. 228-234 6 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Structural, economic and environmental performance of fibre reinforced wood profiles vs. solutions made of
steel and concrete
Manthey, C., Guenther, E., Heiduschke, A., Haller, P., Heistermann, T., Veljkovic, M. & Hajek, P. 2009 Proceedings of
Workshop: COST Action C25: Sustainability of Constructions - Integrated Approach to Life-time Structural Engineering.
s. 275-289 15 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Sustainability of Constructions - Integrated Approach to Life-time Structural Engineering: Proceedings of the
Workshop, Timişoara, 23-24 October 2009. COST Action C25
Bragança, L. (red.), Koukkari, H. (red.), Blok, R. (red.), Gervásio, H. (red.), Veljkovic, M. (red.), Plewako, Z. (red.),
Landolfo, R. (red.), Ungureanu, V. (red.) & Simões da Silva, L. (red.) 2009 416 s.
Publikation: Forskning › Antologi
2008
A design model for stainless steel box columns in fire
Uppfeldt, B., Ala Outinen, T. & Veljkovic, M. 2008 i : Journal of Constructional Steel Research. 64, 11, s. 1294-1301 8 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Comparative analysis of an integral abutment composite bridge and a concrete bridge with expansion joints
Gervasio, H., Eriksen, J., Veljkovic, M. & Simoes da Silva, L. 2008 Steel bridges : advanced solutions & technologies: 7th
International Conference on Steel Bridges ; conference proceedings ; Guimarães, Portugal, 4 - 6 June, 2008 ; [ICSB '08]
. Cruz, P. J. S. (red.). Brussels : European Convention for Constructional Steelwork, ECCS
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Eco-efficiency
Borg, R. P., Veljkovic, M. & Plewako, Z. 2008 Proceedings of Seminar on Sustainability of Constructions - Integrated
approach to life-time structural engineering: COST Action C25, Dresden, Germany 6.-7.10.2008. s. 3.1-3.3 3 s.
Publikation: Forskning › Artikel i konferenspublikation/proceedings
Guidelines to perform life cycle analysis of bridges
Eriksen, J., Gervasio, H., Rebelo, C., Simoes da Silva, L., Veljkovic, M. & Vesikari, E. 2008 Proceedings of Seminar on
Sustainability of Constructions - Integrated approach to life-time structural engineering: COST Action C25, Dresden,
Germany 6.-7.10.2008. s. 5.27-5.51 25 s.
Publikation: Forskning › Artikel i konferenspublikation/proceedings
10
Innovative connections in tubular steel towers: experiments on segment specimens under static loading
Husson, W. & Veljkovic, M. 2008 Proceedings / Eurosteel 2008: 5th European Conference on Steel and Composite
Structures - Research, Eurocodes, Practice - Graz, Austria, September 3 - 5, 2008. Ofner, R., Beg, D., Fink, J., Greiner,
R. & Unterweger, H. (red.). European Convention for Constructional Steelwork, ECCS, Vol. A, s. 651-656 6 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Numerical study of a steel sub-frame in fire
Santiago, A., da Silva, L. S., Real, P. V. & Veljkovic, M. 2008 i : Computers & Structures. 86, 15-16, s. 1619-1632 15 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Performance of a high-strength friction grip connection with open slotted hole
Husson, W. & Veljkovic, M. 2008 Connections in Steel Structures VI: Proceedings of the 6th international workshop. s.
585-596 12 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Structural member behaviour and analysis in case of fire
Veljkovic, M., Lopez, N., Vila Real, P., Uppfeldt, B., Simoes da Silva, L., Franssen, J-M., Bouchaïr, H., Muzeau, J-P.,
Vassart, O., Bacinskas, D., Kaklaskaus, G., Gribniak, V., Nigro, E., Cvetkovska, M., Lazarov, L. & Cefarelli, G. 2008
Urban Habitat Constructions under Catastrophic Events : COST Action C26. Mazzolani, F. M. (red.). Valetta: University
Publishing, s. 45-50 6 s.
Publikation: Forskning › Artikel i konferenspublikation/proceedings
Survey on educational material on sustainable constructions
Veljkovic, M., Koukkari, H. & Braganca, L. 2008 Proceedings of Seminar on Sustainability of Constructions - Integrated
approach to life-time structural engineering: COST Action C25, Dresden, Germany 6.-7.10.2008. s. 1.59-1.67 9 s.
Publikation: Forskning › Artikel i konferenspublikation/proceedings
Sustainability of Constructions Integrated Approach to Life-time Structural Engineering: Proceedings of
Seminar, Dresden 6. 7 October 2008
Bragança, L. (red.), Koukkari, H. (red.), Blok, R. (red.), Gervásio, H. (red.), Veljkovic, M. (red.), Plewako, Z. (red.),
Landolfo, R. (red.), Ungureanu, V. (red.), Simões da Silva, L. (red.) & Haller, P. (red.) 2008
Publikation: Forskning › Antologi
Thin-walled steel columns with partially closed cross-section: tests and computer simulations
Veljkovic, M. & Johansson, B. 2008 i : Journal of Constructional Steel Research. 64, 7-8, s. 816-821 6 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Towards a better understanding of behaviour of bridges with integral abutments
Nilsson, M., Eriksen, J. & Veljkovic, M. 2008 Composite construction in steel and concrete VI: proceedings of the 2008
conference, July 20 - 24, 2008, Devil's Thumb Ranch, Tabernash, Colorado . Leon, R. T. (red.). Reston: American
Society of Civil Engineers, s. 717-727 11 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
11
2007
Behaviour of a friction connection using TCB in long slotted holes
Husson, W. & Veljkovic, M. 2007 Proceedings of the 9th International Conference on Steel, Space and Composite
Structures. Singapore: CI-Premier Pte Ltd, 8 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Class 4 stainless steel box columns in fire
Uppfeldt, B. & Veljkovic, M. 2007 Urban habitat constructions under catastrophic events : proceedings of workshop,
Prague, 30. - 31.3.2007 . Wald, F., Mazzolani, F., Byfield, M., Dubina, D. & Faber, M. (red.). Prague: Czech Techn.
Univ., s. 87-92 6 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Introduction to Eco-efficency
Borg, R. P. & Veljkovic, M. 2007 Sustainability of Constructions : Integrated Approach to Life-time Structural Engineering.
Proceedings of the First Workshop Lisbon 13. 14. 15 September 2007. Braganca, L., Koukkari, H., Blok, R., Gervasio, H.
& Veljkovic, M. (red.). Multicomp, 3 s.
Publikation: Forskning › Artikel i konferenspublikation/proceedings
Monitoring of a bridge with integral abutment
Nilsson, M., Husson, W., Collin, P., Veljkovic, M. & Petursson, H. 2007 Improving Infrastructure Worldwide: IABSE
symposium, Weimar 2007, [September 19 - 21, 2007] ; report. Kuhlmann , U. (red.). Zürich: International Association for
Bridge and Structural Engineering, 8 s. (IABSE Report; Nr 93).
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Sustainability of Constructions - Integrated Approach to Life-time Structural Engineering: Proceedings of the 1st
Workshop: Lisbon 13, 14, 15 September 2007
Bragança, L. (red.), Koukkari, H. (red.), Blok, R. (red.), Gervásio, H. (red.), Veljkovic, M. (red.), Plewako, Z. (red.),
Landolfo, R. (red.), Ungureanu, V. (red.) & Simões da Silva, L. (red.) 2007
Publikation: Forskning › Antologi
Use of duplex stainless steel in economic design of a pressure vessel
Veljkovic, M. & Gozzi, J. 2007 i : Journal of Pressure Vessel Technology. 129, 1, s. 155-161 7 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
2006
Design of thin-walled steel column with partially closed cross-section
Veljkovic, M. & Johansson, B. 2006 Proceedings of SDSS 2006 : International Colloquium on Stability and Ductility of
Steel Structures : [Lisbon, Instituto Superior Técnico, 06 - 08 September 2006]. Camotim, D. (red.). Lisboa: Instituto
Superior Técnico, s. 639-647 9 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
12
International workshop on the bridges with integral abutments: topics of relevance for the INTAB project
Collin, P. (red.), Veljkovic, M. (red.) & Pétursson, H. 2006 Luleå: Luleå tekniska universitet. 151 s. (Technical report /
Luleå University of Technology; Nr 2006:14).
Publikation: Forskning › Rapport
Light steel framing for residential buildings
Veljkovic, M. & Johansson, B. 2006 i : Thin-Walled Structures. 44, 12, s. 1272-1279 8 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Residual static resistance of welded stud shear connectors
Veljkovic, M. & Johansson, B. 2006 Composite Construction in Steel and Concrete V: Proceedings of the 5th
International Conference. Leon, R. T. & Lange, J. (red.). American Society of Civil Engineers, s. 524-533 9 s. (ASCE
Conference Proceedings; Nr 186).
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
2005
Stabilizing light weight steel buildings with shear walls
Veljkovic, M. & Johansson, B. 2005 EUROSTEEL 2005: 4th European Conference on Steel and Composite Structures.
Hoffmeister, B. & Hechler, O. (red.). Aachen: Verlag Mainz, s. 1.8-25-1.8-33 9 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Towards economic design of a pressure vessel made of duplex stainless steel
Veljkovic, M. & Gozzi, J. 2005 Super-High Strength Steels: 1st international conference, 2 - 4 November 2005, Rome,
Italy, [proceedings]. Milano: Associazione Italiana di Metallurgia, 12 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
2004
Continuing education in structural connection
Wald, F., Moore, D., Veljkovic, M. & Eliášová, M. 2004 Innovative Steel Connections : June 3-5, 2004, Radison SAS H.,
Amsterdam, Netherlands. Amsterdam: American Institute of Steel structures, s. 37-44 8 s.
Publikation: Forskning › Artikel i konferenspublikation/proceedings
Design of hybrid steel girders
Veljkovic, M. & Johansson, B. 2004 i : Journal of Constructional Steel Research. 60, 3-5, s. 535-547 13 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
Towards a design proposal for lightweight steel columns at high temperature
Karlström, P. & Veljkovic, M. 2004 10th Nordic Steel Construction Conference, Copenhagen, Denmark 7-9. June 2004 :
NSCC 2004 : proceedings. Danish Steel Institute, s. 543-554 12 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
13
2003
Academic entrepreneurship in the making: designing a multi-disciplinary post-graduate research school
Nilsson, A. & Veljkovic, M. 2003
Publikation: Forskning › Konferensbidrag
Frågor och svar för dimensionering av förband enligt Eurokod 3
Johansson, B. & Veljkovic, M. 2003 Luleå: Luleå tekniska universitet. 163 s.
Publikation: tbildning › Kompendium / ecture notes
Varför rasade World Trade Center?
Veljkovic, M.2003i : Årsbok / Bergshandteringens vänner.s. 105-1106 s.
Publikation: Populärvetenskap › Tidskriftsartikel
2002
Duplex stainless steel for pressure vessel design: experimental and finite element study performed within
ECOPRESS, subtask 4.3,5.1,5.4 and 6.2
Veljkovic, M., Gozzi, J., Lagerqvist, O. & Rudolfsson, J. 2002 Luleå: Luleå tekniska universitet. (Research report / Luleå
University of Technology; Nr 2002:05).
Publikation: Forskning › Rapport
Experimental and finite element study of gypsum plaster board shear walls
Veljkovic, M. & Filipsson, T. 2002 Luleå: Luleå tekniska universitet. 103 s. (Research report / Luleå University of
Technology; Nr 2002:02).
Publikation: Forskning › Rapport
2001
Design for buckling of plates due to direct stress
Veljkovic, M. & Johansson, B. 2001 NSCC 2001 Proceedings: Helsinki, Finland, 18 - 20 June 2001, organized by
Helsinki University of Technology .... Mäkeläinen, P., Kesti, J., Jutila, A. & Kaitila, O. (red.). Helsinki: Helsinki University
of Technology, s. 729–736 8 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Steel plated structures
Johansson, B. & Veljkovic, M. 2001 i : Progress in Structural Engineering and Materials. 3, 1, s. 13-27 15 s.
Publikation: Forskning › Tidskriftsartikel
2000
Behaviour and design of shallow composite slab
Veljkovic, M. 2000 Proceedings of the Conference Composite Construction in Steel and Concrete IV. American Society
of Civil Engineers, s. 310-321 12 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
14
Design of uniformly compressed stiffened plates: a review of Eurocode 3-1-5
Veljkovic, M. & Johansson, B. 2000 Coupled Instabilities In Metal Structures: Proceedings of the Third International
Conference Held in Lisbon. Camotim, D., Dubina, D. & Rondal, J. (red.). Singapore: World Scientific, s. 305-314 10 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
1998
Design of composite slabs based on small scale test
Veljkovic, M. 1998 Proceedings / Nordic Steel Construction Conference 98: Bergen, Norway, September 14th - 16th,
1998 ; new materials, new codes, new applications. Oslo: Norwegian Steel Association, s. 415-426 12 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
Influence of load arrangement on composite slab behaviour and recommendations for design
Veljkovic, M. 1998 i : Journal of Constructional Steel Research. 45, 2, s. 149-178 10 s.
Publikation: Forskning - peer-review › Tidskriftsartikel
1997
Improved partial connection method for composite slab design
Veljkovic, M. 1997 Proceedings of the 1996 Engineering Foundation Conference on Composite Construction in Steel and
Concrete III. American Society of Civil Engineers, s. 644-659 16 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
1996
Behaviour and resistance of composite slabs: experiments and finite element analysis
Veljkovic, M. 1996 Luleå: Luleå tekniska universitet. 36 s. (Doctoral thesis / Luleå University of Technologyy; Nr 207).
Publikation: Forskning › Doktorsavhandling
Towards a numerical procedure for composite slab assessment
Wright, H. D. & Veljkovic, M. 1996 Recent Research and Developments in Cold-Formed Steel Design and Construction:
Recent Research and Developments in Cold-Formed Steel Design and Construction. Yu, W-W. (red.). Rolla, Mo:
University of Missouri-Rolla, s. 415-435 21 s.
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
1995
Longitudinal shear capacity of composite slabs
Veljkovic, M. 1995 Nordic Steel Construction Conference '95: proceedings : [new materials, new codes, new
applications] : Malmö, Sweden, June 19-21, 1995. Stockholm: Stålbyggnadsinstitutet, s. 547-554 8 s. (Publikation /
Stålbyggnadsinstitutet - SBI; Nr 150).
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
15
1994
Computational modelling of interaction between concrete and steel
Olofsson, T., Noghabai, K. & Veljkovic, M. 1994 i : Diana World. 1, s. 8-10 3 s.
Publikation: Forskning › Tidskriftsartikel
1993
Development of a new sheeting profile for composite floors: experimental study and interpretation
Veljkovic, M. 1993 Luleå: Luleå tekniska universitet. (Research report / Luleå University of Technology; Nr 1993:47).
Publikation: Forskning › Rapport
Partial interaction in composite slabs
Veljkovic, M. 1993 Proceedings : Nordic Concrete Research Meeting : Göteborg 1993. Oslo: Norsk Betongforening, s.
293-296 4 s. (Nordic Concrete Research).
Publikation: Forskning - peer-review › Artikel i konferenspublikation/proceedings
16