1. No category

5VDC 20MM COOLING FAN
DC FANS
Elina Fan # KDCO52010LB8P.
Miniature 5 vdc 60 ma brushless
fan. 8500 rpm, 0.43 cfm, 21 dBA.
0.78" square x 0.39". Plastic frame
and 7 blade impeller. Ball bearings.
6" leads. UL, CSA recognized.
HIGH-EFFICIENCY HEATSINK
AND COOLING FAN
ATS # 304731-001
Unusual heatsink with a
solid copper bottom and
an integrated cooling fan.
12 Vdc, 0.43 Amp fan is
70 mm (2.75”) square x
15 mm (0.59”) thick. The heatsink
under the fan consists of “fan-folded”
aluminum to achieve maximum
surface area. The bottom
surface of the heatsink is
covered with a solid
copper plate, 3.22” x 2.25”
with a 0.3” thick raised
center portion that is 1.4”
(35mm) square. This is the
effective mounting surface of the
heatsink. A folding handle/ clamp
sits atop the heatsink assembly.
CAT# CF-215
CAT# CF-182
5 VDC 20MM FAN
New
Item
Adda# AD2005LB-G73
5 vdc 0.08 amp.
0.80” square x 0.4” thick.
Ball bearing fan. 8,000 RPM. 0.40 CFM airflow.
Two 1.7” leads with 3-contact, sub-mini socket
connector (1mm spacing). CE.
CAT# CF-251 $4.50 each
5 VDC 20MM FAN
bottom view
$ 7.50 each
12 VDC FAN W/HEATSINK, 60 MM
AVC # C6015B12L. Fan and
aluminum heatsink assembly
designed to cool microprocessors. 12 vdc ball bearing fan is 2.36" x 2.36" x
0.60" high (60mm x 60mm x
15mm). 0.15 amp, 3300 RPM,
10.03 CFM, 30.1 dB(A). Plastic
frame and 11 blade impeller. Includes
easy-on clip. Three 5" wire leads terminated with 3 pin
socket. Overall heatsink size: 2.45" x 2.37" x 1" high.
Mounting face of heatsink is 60mm x 52mm. Prepped
with patch of thermal compound on bottom of
heatsink. CAT# CF-231 $5.50 each
SMALL HIGH-VELOCITY
FAN ASSEMBLY
Unique, miniature
fan assembly
moves a lot of
air for its size.
Consists of
four dual 12Vdc fans.
Each fan is really two
independent fans,
each with its own motor. The fans are AVC Model
DB04048B12U, 12 Vdc, 1.14 Amps (per dual fan), UL,
CSA, CE. These dual fans are 40mm square x 48mm
long. The front, three-blade fan is augmented by a
rear, five-blade fan. Each dual fan has its own leads,
connector and finger guard. Each is attached to a common plastic bracket with 2.3" long screws. They can
be disassembled to yield eight separate fans. Overall
size: 7.75” x 1.56” x 2.65.” Note: These assemblies
appear new, but may be removed from new equipment. Wiring diagram available on our web site.
CAT# CF-224
New
Item
$4.00 each
$15.00 each
TWO 5VDC 40MM FANS
Elina Fan
#KDC050410MB8P
New assembly with two
fans wired to a two pin
socket connector (0.15”
centers). Each fan has its own set of 12” leads. Fans
are 40mm (1.59”) square x 0.41” thick. 5 Vdc, 110 mA.
UL. CAT # CF-164 $4.00 per set of 2 fans.
Sunon # KD0501PFB3-8
5Vdc, 0.3W. 20mm square x 10mm
(0.79” square x 0.4”). Three 1.75” leads
w/ 3-contact socket connector (1.25 mm centers).
CAT# CF-249 $4.50 each
5 VDC 25MM FAN
Sunon #KD0502PFB3-8
5Vdc, 0.3W. 25mm
square x 10mm (0.98” square x
0.4”). Three 1.5” leads w/ 3-contact
socket connector (1.25 mm centers). UL.
CAT# CF-248 $4.65 each
40 MM, 12 VDC
New
Item
Delta # EFB0412HHD
12 Vdc, 0.15A miniature
cooling fan. 40 mm square x 20mm.
Plastic frame and 5-blade impeller.
Three 13” leads. UL, CSA, CE,VDE.
CAT# CF-252
$3.00 each
12 VDC 40MM FAN
PSC Select #P1124020HB2A
1.58" square x 0.80." 12 Vdc,
1.44 W, 120 mA. Plastic frame and
7 blade impeller. Three 3.25" wire
leads w/ 3 pin connector. UL, CSA.
CAT # CF-184 $2.50 each
50MM 12VDC FAN
New
Item
Sunon™ #KDE1205PFB2-8
Brushless DC fan. 50mm square x
10mm. (1.96” x 1.96” x 0.42”).
12 Vdc, 0.7W. 11.5” pigtail leads. UL.
CAT# CF-247
$2.50 each
12 VDC, 50 MM
Delta #EFB0512HA
1.96” square x 0.4”. 12 Vdc ,
0.15 Amp. DC brushless fan.
6” leads w/ 3-contact socket
connector (0.1”). UL, CSA, CE.
CAT # CF-203 $2.50 each
HIGH-SPEED 12VDC 60MM FAN
AVC #DV06038B12S
60mm x 60mm x 38mm
brushless, ball bearing cooling fan.
12Vdc, 2.85 Amps. 15,000 RPM.
69.4CFM. 62.0 dB-A. Plastic
(UL 94V-0) frame and 5-blade
New
impeller. Three, 12” leads.
Item
UL, CSA, CE, TUV.
CAT# CF-253 $4.50 each
ORDER TOLL FREE 1-800-826-5432
17
12 VDC 60MM
12 VDC 92 MM
Delta #EFB0612MA
12 Vdc, 0.12 Amp cooling fan.
2.36” x 2.36” x 0.39” (10mm).
Three 12” leads with 3-conductor
connector. UL, CSA, CE.
Papst Multifan #3312. 3.63" square x
1.27" ball bearing cooling fan. 12 Vdc,
(6-15 Vdc) 290 mA. Fibreglass reinforced plastic PBTP housing, PA impeller. 47.1 CFM. 3000 RPM. 12"
22 AWG leads. UL, CSA, CE.
CAT# CF-208
$ 2.50 each • 10 for $2.25 each
12 VDC 60MM SQUARE FAN
Nidec Beta V™ # TA225DC
Model# B33399-55.
2.37” square x 1”. 12 vdc
0.11 amp DC fan. 12 cfm,
17.2 dBA. Plastic frame and
7 blade impeller. 11” leads with
2-pin connector. UL, CSA.
CAT# CF-183 $3.75 each
12 VDC 60 MM
Sanyo Denki Pico
Ace 25 #109R0612H402
12 Vdc, 0.11 Amp. Operates
6-13.8 Vdc. Brushless fan.
60mm (2.39”) square x 25mm
(0.99”) thick. 3,800 RPM.
18.7 CFM. UL, CSA.
CAT# CF-218 $3.75 each
12VDC 80MM
U.S. Toyo Fan
# USTF802512MW.
DC brushless, ball bearing fan.
12 Vdc, 0.18 Amp
3.15" square x 1" thick.
5" leads. UL, CSA, CE.
CAT# CF-197 $3.75 each
10 for $ 3.25 each
12 VDC 80 MM
Delta #AFB0812HHD
12 Vdc, 0.26 Amps.
3.14” square x 0.79” thick
brushless cooling fan. Plastic
frame and 5-blade impeller,
Three 10” leads with socket
connector. UL, CSA, CE.
CAT# CF-219 $3.50 each
12 VDC 80 MM FAN W/ FAN GUARD
Minebea Co., NMB model 3110KL-04W-B19
12 Vdc, 0.13 Amp. 3.15” x
3.15” x 0.99.” Prepped with metal
fan guard. Plastic frame and
7 blade impeller. Three 8” leads
with 3-contact socket connector
(0.1” spacing). UL, CSA, CE, VDE.
CAT# CF-217 $ 3.75 each
10 for $3.25 each
12 VDC 6.75”
Comair Rotron “Major™”
JQ12ROX. 12 Vdc,
2.26 Amps. 6.75” x 5.92” x
2.” 235 CFM ball bearing
cooling fan. Four wires.
Fuse and polarity protected.
Metal housing. Polycarbonate
impeller. UL, CSA, CE.
CAT# CF-204 $3.50 ea. • 10 for $ 3.25 ea.
12- 28 VDC 6.75” FAN
W/ FINGER GUARD
Comair Rotron “Patriot”
Model PQ24BQDNX
24 Vdc, 1 Amp,
(12-28 Vdc) 3425 RPM,
200-235 CFM. 172 mm x
51.0mm (6.75” x 2.00”) Metal
housing. Polycarbonate impeller.
2-pin connector for solder or standard fan
plug. UL, CSA, CE, TUV. Metal fanguard attached to
one side. Removed from new equipment.
CAT# CF-244 $15.00 each
HIGH-VELOCITY 12 VDC 120MM
FAN W/ SCREEN
JMC # 1238-12HBA
120 mm (4.72") square x
38 mm (1.5") wide cooling
fan. Dual ball bearing fan
provides reliable output of
130 CFM @ 3500 RPM.
12 Vdc, 1.2 Amp. 49 Dba max at
1M. Designed for 50,000 hours @
25 deg. C. Thermoplastic housing and 7 blade
impeller. Three 7" pigtail leads with 3-pin connector
(0.1" centers). Third lead is for sensing rotation.
Prepped with metal finger guard. UL, CSA, CUL, CE.
CAT# CF-152
$5.00 each
80 for $4.00 each • 400 for $3.00 each
24 VDC, 92 MM FANS
Nidec Beta V™ TA350DC
92mm x 92mm x 25mm
(3.64” x 3.64” x 0.98”) Brushless,
ball bearing fan. .UL, CSA, TUV.
Three models:
Model M34261-16G6. Thermistor speed control
mounted in front of fan blades. Causes fan to
rotate faster as temperature rises. 24Vdc,
0.28 Amps. Two 4.5” leads with 2-contact socket
connector (0.1” spacing).
CAT# CF-211 $2.75 each • 10 for $2.50 ea.
Model M34261-16C6. Thermistor speed control
mounted on 4.5” leads with ring terminal to facilitate mounting. Causes fan to rotate faster as temperature rises. Two 4.5” wire leads with 2-contact
socket connector (0.1” spacing).
CAT# CF-212 $2.75 each • 10 for $2.50 ea.
Model #M34691-33. No thermistor. Three 6” wire
leads with 4-contact socket connector (0.1” spacing).
CAT# CF-209 $2.50 each • 10 for $2.25 ea.
AC FANS
115 VAC 80 MM
EZ Fan# FP-108A-S-3.
3.13” square X 1.5”. 110/120 Vac,
0.5 Amps. 17 CFM. Zinc housing
with seven blade thermoplastic
impeller. 12” wire leads. UL/CSA.
CAT# CF-117 $14.00 each
CAT# CF-221 $18.50 each
FAX YOUR ORDER 24 HOURS A DAY (818) 781-2653
18
120 VAC 120 MM
12 VDC, 100 MM BLOWER
EZ Fan # FP-108-1-S3.
4.69" square x 1.5".
110/120 Vac, 0.11 Amps.
54 CFM. Aluminum housing
with 5 blades. Terminals can
be soldered or used with
standard fan plug. UL, CSA.
AVC #F9733B12LG
12 Vdc, 0.72 Amps.
Ball bearing blower with
plastic body and blades. 52db
noise. Three 7” leads with
3-conductor socket connector
(0.1” spacing). 4.12” x
3.85” x 1.42.” UL, CSA, CE, TUV.
Removed from new equipment.
CAT# CF-120
$14.00 each
115 VAC, 120 MM
Adda # AA1281UB-AT
110-120V, 50/60Hz,
0.27/0.23A. 120mm square x
38mm (4.7” square x 1.52”).
2500 RPM, 97 CFM.
46.4 dB-A. Diecast aluminum
frame. 5-blade thermoplastic
impeller. Two-pin connector fits standard fan plugs
or can be soldered. UL, CE. CAT# CF-1281
CAT# CF-246 $7.50 each
24 VDC, 5" BLOWER
Japan Servo # SCBD24K7-611.
24 vdc 0.42 amp 10 watt brushless
blower. Operates on 12 - 27.6 Vdc.
Plastic impeller and frame, 5" x
4.96" x 1.54" (127mm x
126mm x 39mm). 3500 rpm
34 cfm 51 dB-A. UL/CSA.
$11.85 each • 100 for $10.25 eacg
CAT# CF-229
220 VAC, 120 MM
12VDC 120MM
Comair / Rotron “Muffin”™
Model MU3A1.
220 / 230 Vac, 14 Watt
cooling fan. 4.7” x 4.7” x
1.5”. Thermoplastic frame
and three blade impeller.
3100 RPM. 105 CFM.
Terminals can be soldered or
use standard two-prong fan plug. UL, CSA.
Nidec Gamma32 # A33445-68L.
12 Vdc @ 550 mA, ball-bearing
blower. 4.73" x 4.73" x
1.26" wide. 23 CFM air flow.
3 color coded 12" long leads.
UL, CUL, TUV approved.
CAT# CF-205
12VDC SQUIRREL CAGE BLOWER
$12.00 each
CENTRIFUGAL BLOWERS
5 VDC MINI BLOWER
Adda # AB0405HB-G03
5Vdc, 0.21A DC brushless
centrifugal blower.
0.55” diameter x 0.4” (40mm x
10mm). Three 2.3” wire leads with miniature 3contact female connector (1mm centers). Found in
several models Dell Inspiron and Latitude computers. UL, CE. CAT# CF-250 $ 5.75 each
$10.95 each
CAT# CF-196
$11.95 each
Comair Rotron # DE18-AL12PQX.
12 Vdc, 0.25 Amp. 4" (100mm)
x 1.8" (46mm) black polycarbonated impeller. Ball
bearing motor mounted on
a triangular plate with three
mounting holes on 3.62" centers.
Overall height of motor and impeller is 2.24". Five
12" leads, black & red for 12 Vdc. UL, CSA, CE.
CAT# CF-171
$3.00 each
METAL FAN GUARDS
12 VDC 97 MM BLOWER
FOR 60 MM SQUARE FANS
NMB # BG0903-B045-00S.
1.20A. 3.82” x 3.68” x 1.30”
(97.0mm x 93.5mm x 33.0mm).
12 Vdc centrifugal blower.
UL, CSA, VDE, CE.
CAT# CFG-60 $1.00 each
FOR 80 MM SQUARE FANS
CAT# CF-216
$ 7.50 each
FOR 118/120 MM SQUARE FANS
12 VDC, 97MM BLOWER
GUARD FOR 150 MM FANS
CAT# CFG-80 $1.25 each
CAT# CFG-120 $1.60 each
Nidec, Gamma 30, #A34124.
12 Vdc @ 650 mA, ball-bearing
blower. 3.83" x 3.72" x
1.30" wide. 25 CFM air flow.
UL, CUL, TUV.
CAT# CF-150 $6.50 each
For 6” (150mm) fans.
Two mounting holes
on 6.375” centers.
CAT # CFG-150 $ 1.75 each
10 for $ 1.50 each
FAN CORDS
24 VDC BLOWER, 95MM
Delta Electronics BFB1024H.
24 vdc 0.60 amp ball bearing
blower. Operates on 7 - 27.6 Vdc.
Plastic impeller and frame, 3.83" x
3.72" x 1.30" (97mm x 94mm x
33 mm). 3600 rpm 25.43 cfm 52
dB-A . UL/CSA
CAT# CF-228
24” CORD WITH
RIGHT-ANGLE PLUG
CAT # CFC-8
$ 1.00 each
24" FAN POWER CORD
w/ 45 DEGREE PLUG
$7.50 each
CAT# CFC-4 $1.00 each
ORDER TOLL FREE 1-800-826-5432
19