1. technology and computing
2. hardware

DBS-PG-14
Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide
RACKS
RB-2P Series - Economy Welded 2-Post Open Frame Rack
When you need quality on a budget, you can trust RACK BASICS®; the
contractor-friendly brand of economy rack and cabinet solutions. The
RB-2P77, your best economy option when a standard welded rack is required.
•Constructed of 12 gauge steel (Suggested load capacity of 800 lb.).
•44U - 83.12” Overall Height.
•19” EIA-310-D compliant 10-32 front and rear tapped rails.
•Side ganging and accessory mounting holes.
•Two (2) bonding studs included:
•One (1) at bottom to accommodate grounding from floor.
•One (1) at top to accommodate grounding from overhead.
•Finished in smooth black powder paint.
•Rails and Base packaged in cardboard to prevent freight damage.
Part No.
RB-2P77
Description
44U, 19” Rack Mounting, 83.13” Overall Height
DNRR**HDW Series - Heavy Duty Welded 2-Post Open Frame Rack
•Constructed of heavy duty 10 gauge steel (Suggested load capacity of 1,530 lb.).
•19” EIA-310-D compliant 10-32 front and rear tapped rails.
•1.25” cable pass-through.
•Tapped 10-32 accessory hole.
•Ganging and accessory mounting holes.
•Bonding studs located bottom and top to accommodate grounding options.
•Finished in smooth black powder paint.
•Rails and base packaged in heavy duty cardboard to prevent freight damage.
Part No.
DNRR42HDW
DNRR70HDW
DNRR77HDW
DNRR84HDW
Description
24U, 19” Rack Mounting, 48.13” Overall Height
40U, 19” Rack Mounting, 83.13” Overall Height
44U, 19” Rack Mounting, 83.13” Overall Height
48U, 19” Rack Mounting, 90.13” Overall Height
Looking for more options? Visit www.hammondmfg.com for complete
offering including both 19” and 23” mounting options.
DRZ4 Series - GR-63 Seismic Zone 4 Certified 2-Post Rack
•Constructed of 10 gauge steel (rails) reinforced with structural angle base for maximum structure.
•19” EIA-310-D compliant 10-32 front and rear tapped rails (6.00” deep).
•Rugged design engineered to perform in the most critical seismic environments.
•Increased overall width of 22.50 inches provides additional side-to-side load strength.
•Two (2) sets of side mounting holes on side of rack allows for Hammond cable managers to be mounted
facing front and rear.
•Two (2) ground studs - one (1) located at front of structural angle base, one (1) located under top Rack.
•Includes top Rack mounting holes compatible with top cable accessories.
•Includes large base for freestanding support of equipment.
•Independently tested and certified to exceed established Seismic Zone 4
Telcordia® GR-63-CORE testing standards.
•Dynamic (seismic) suggested load capacity of 800 lb. of equipment installed and 50 lb. of overhead cable
weight on the top when secured using C4K-Z4 seismic bolt down kit.
•Finished in smooth black powder paint.
Part No.
DRZ477
2
Height
84.00
Overall Dimensions
Width
Depth
22.75
18.00
www.hammondmfg.com
Rack
Units
44U
Mounting Dimensions
Height
Width
77.12
19.00
Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide
•Base and panel constructed in 16 gauge steel.
•Includes two (2) 12 gauge steel 19 inch EIA-310-D compliant mounting rails.
•Rails are 10-32 tapped rails with rack space indicators.
•Rails are angled 10-degrees when rack is assembled.
•Starter pack of 25 rack screws included.
•Available in 8U, 12U and 16U rack spacing.
•Side of rails include multiple tie points for cable management.
•Finished in smooth black powder paint.
•Knockdown design ships unassembled for easy handling and shipping protection.
•Tested to nearly double the suggested load rating of 195 lbs.
Overall Dimensions
Height
Width
Depth
16.00
20.00
11.50
23.00
20.00
11.50
30.00
20.00
16.00
Part No.
HDR8UBK
HDR12UBK
HDR16UBK
Rack
Units
8U
12U
16U
RACKS
HDR Series - Desktop Open Frame Rack
Mounting Dimensions
Height
Width
14.00
19.00
19.00
21.00
28.00
19.00
DNRR**HDKB Series - Heavy Duty Knockdown 2-Post Open Frame Rack
•Constructed of heavy duty 10 gauge steel (Suggested load capacity of 1,200 lb.)
•EIA-310-D compliant 10-32 front and rear tapped rails with 19” mounting.
•Side rails include:
•1.25” cable pass-thru
•Tapped 10-32 accessory hole and ganging/accessory holes
•Finished in smooth black powder paint.
•Knockdown design ships unassembled for easy handling and shipping protection.
•Self-squaring design reduces assembly time.
Part No.
DNRR70HDKB
DNRR77HDKB
DNRR84HDKB
Description
40U, 19” Rack Mounting, 76.13” Overall Height
44U, 19” Rack Mounting, 83.13” Overall Height
48U, 19” Rack Mounting, 90.13” Overall Height
Looking for other options? Visit our website for our full rack offering.
DC4R Series - 4-Post Steel Open Frame Rack
•Constructed of 12 gauge steel.
•Available in 24U and 44U and in two convenient infinitely adjusting depths.
•24”- 36” for standard rack mount equipment.
•32”- 48” for extra deep equipment.
•Includes two (2) pairs of 19” mounting EIA-310-D compliant square-hole rails with RU indicator.
•Includes one (1) set of two (2) horizontal cable manager bars.
•Ships unassembled in a flat pack container for easy handling and shipping protection.
•Self-squaring design reduces assembly time.
•Optional pair of rails available for multiple mounting depths.
•Suggested load capacity of 2,000 lb.
•Finished in smooth black powder paint.
Part No.
DC4R24
DC4R44
DC4R4448
Description
24U - 24” to 36” overall depth
44U - 24” to 36” overall depth
44U - 32” to 48” overall depth
Accessories:
Part No.
DC4RSHCM
DC4RPR24
DC4RPR44
RRALJK
Description
Additional Horizontal Cable Bars (2)
Additional pair of rails for DC4R 24U
Additional pair of rails for DC4R 44U
Standard Baying Hardware Kit
www.hammondmfg.com
See pages 14 to 17
for rack shelves,
cable managers, and more.
3
Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide
HWMR Series - Heavy Duty Adjustable Depth Pivoting Wall Mount Rack
Part No.
HWMR1912UBK
HWMR1920UBK
HWMR1924UBK
HWMR1932UBK
Description
12U Wall Rack
20U Wall Rack
24U Wall Rack
32U Wall Rack
Depth (in)
18.00 to 24.00
18.00 to 24.00
18.00 to 24.00
18.00 to 24.00
Includes fifty (50) pack of 10-32 screws and cage nuts and wall
mounting template for easy installation.
Wall mounting hardware not included.
WALL MOUNT
•Constructed of 12 and 16 gauge steel.
•19” EIA compliant square hole rails.
•Rack frame pivots on center point.
•Adjustable depth from 18” to 24” using
slots for easy set-up and adjusting.
•Three (3) spring pin positions allow for
simplified equipment maintenance.
•Side and rear cable access with multiple
tie points for cable management.
•Finished in smooth black powder paint.
•Ships unassembled in a flat pack for easy
handling and shipping protection.
•Suggested load capacity of 220 lb.
APB Series - Heavy Duty Adjustable Depth Wall Rack
Part No.
APB19007BK1
APB19010BK1
APB19014BK1
APB19021BK1
PBCOVER
Description
4U Wall Rack
6U Wall Rack
8U Wall Rack
12U Wall Rack
Dust cover/shelf
Depth (in)
12.00 to 18.00
12.00 to 18.00
12.00 to 18.00
12.00 to 18.00
6.00
Includes twenty-five (25) pack of 10-32 black rack screws with
washers and mounting template for easy installation.
Wall mounting hardware not included.
•Constructed of 14 gauge steel.
•19” EIA compliant 10-32 tapped rails.
•Double-hinged for easy rear access.
•Adjustable depth from 12” to 18” using
slots for easy set-up and adjusting.
•Rear cable access with multiple tie points
for cable management.
•Finished in smooth black powder paint.
•Ships unassembled in a flat pack for easy
handling and shipping protection.
•Suggested load capacity of 80 lb.
APBS Series - Heavy Duty Adjustable Wall Rack with Shelf
Part No.
APBS194UBK
Description
4U Wall Rack
Depth (in)
12.00 to 18.00
Includes twenty-five (25) pack of 10-32 black rack screws with
washers and mounting template for easy installation.
Wall mounting hardware not included.
•Constructed of 14 gauge steel.
•19” EIA compliant 10-32 tapped rails.
•Adjustable depth from 12” to 18” using
slots for easy set-up and adjusting.
•Includes twelve (12) inch depth shelf.
•Rear cable access with multiple tie points
for cable management.
•Finished in smooth black powder paint.
•Ships unassembled in a flat pack for easy
handling and shipping protection.
•Suggested load capacity of 75 lb.
FWB Series - Economy Fixed Wall Rack
Part No.
FWB191UBK
FWB192UBK
FWB194UBK
Description
1U Wall Rack
2U Wall Rack
4U Wall Rack
Depth (in)
6.00
6.00
6.00
Includes four (4) 10-32 black rack screws with washers and clip
nuts per rack unit. Also includes mounting template for easy
installation. Wall mounting hardware not included.
•Constructed of 16 gauge steel.
•19” EIA compliant rails with clip-nuts.
•Hinged for easy rear access to devices.
•Rear cable access.
•Finished in smooth black powder paint.
•Suggested load capacity of 70 lb.
VPB Series - Heavy Duty Vertical Wall Rack
Part No.
VPB192UBK
VPB194UBK
VPB196UBK
Description
2U Vertical Wall Rack
4U Vertical Wall Rack
6U Vertical Wall Rack
Includes four (4) 10-32 black rack screws with washers and clip
nuts per rack unit. Wall mounting hardware not included.
4
www.hammondmfg.com
•Constructed of 14 gauge steel.
•Horizontal or vertical equipment
mounting.
•19” EIA compliant rails with clip-nuts.
•Suggested load capacity of 135 lb.
•Rear cable access.
•Finished in smooth black powder paint.
Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide
RCHLB Series - Heavy Duty Ventilated Wall Mount Security Lock box
Part No.
RCHLB193UBK1
Overall Dimensions
H
W
D
5.25
21.00 14.23
Panel
Height
3U
Note: Usable depth = 13.41”
HLP Series - Low-Profile Network/Security Wall Mount Cabinet
Part #
HLP4UBK
HLP6UBK
HLP8UBK
Rack Space
Mounting
Inches Units
7.0
4
10.5
6
14
8
Overall Dimensions
(Inches)
Height Width Depth
31.00 27.50 10.80
31.00 27.50 15.05
31.00 27.50 19.30
Includes starter pack of 10-32 black rack screws and clip nuts.
Wall mounting template is included but hardware is not.
Optional Accessories:
Part #
HLP4UR
Description
4U Mounting Rail Kit
Features:
•Available in 4U, 6U and 8U.
•Constructed of 16 gauge steel.
•12 gauge steel mounting rails are
punched for use with clip nuts. Rails
pivot 180 degrees for easy equipment
mounting.
•22 inches of usable vertical mounting
equipment depth.
•Conduit knockout sizes include:
•2.0”, 1.5”, 1.0”, 11/16” and 9/16”
•Two (2) laser knockouts for optional fans
located top and bottom.
•Includes studs for grounding and
electrical box installation.
•Rugged sand-textured black powder paint
(reduced fingerprints and marks).
•Suggested load capacity of 150 lb.
WALL MOUNT
Features:
•Constructed of 16 gauge steel.
•19” EIA compliant rails with clip-nuts.
•Vented sides with cable entry hole
•Lock and key included.
•Fixed mounting rails recessed (1”).
•Suggested load capacity of 130 lb.
•Finished in textured black powder paint.
HWM Series - Swing Out Wall Mount Cabinet
•
•
•
•
•
•
•
•
•
•
Designed for side venting high
capacity servers, switches and
other equipment.
Additional sizes available at
www.hammondmfg.com
Constructed of 14 gauge steel (rear section); 16 gauge steel (center section and doors).
Includes one (1) pair of tapped (10-32) mounting EIA compliant adjustable depth 10-32 tapped rails.
Available in three (3) depths and four (4) heights.
All sizes include either vented 63% perforated front door or clear window front door.
Center section features:
• Heavy duty spring-hinge pin for easy installation and removal.
• Non-removable side panel includes two (2) vents and fan grill.
Rear section features:
• Top and side conduit knock-outs for cable entry.
• Generous cable management lances located on the rear section as well as on mounting rails.
Front door and center section keyed the same.
Grounding lugs located on top and bottom of the door, center and rear sections.
Rugged sand-textured black powder paint (reduced fingerprints and marks).
Suggested load capacity of 275 lbs.
Vented Door
Part No.
Window Door
Part No.
Overall Dimensions
Height Width Depth
HWM2412U20BK
HWM2412U26BK
HWM2420U20BK
HWM2424U26BK
HWM2412U20WDBK
HWM2412U26WDBK
HWM2420U20WDBK
HWM2424U26WDBK
27.75
27.75
41.75
48.75
24.68
24.68
24.68
24.68
25.7
31.7
25.7
31.7
Rack
Units
12U
12U
20U
24U
Mounting Dimensions
Height Width Center
Depth
21
19
20
21
19
26
35
19
20
42
19
26
Accessories
Cabinet
Rack Units
12U
20U
24U
Solid
Front Door
HWMSD2412UBK
HWMSD2420UBK
HWMSD2424UBK
Tapped
10-32 Rail (Pair)
HWMTR12U
HWMTR20U
HWMTR24U
www.hammondmfg.com
Square Hole
Power Outlet
10-32 Rail (Pair) Strip Clip
HWMSR12U
HWMSR20U
HWMPCLIP
HWMSR24U
Lock (Keyed
Differently)
HWMSLOCK
5
Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide
RCHS Series - Heavy Duty Solid Knockdown A/V Cabinet
Part No.
RCHS1901417BK1
RCHS1901717BK1
RCHS1902217BK1
RCHS1902817BK1
RCHS1901024BK1
RCHS1901424BK1
RCHS1902224BK1
RCHS1902824BK1
RCHS1902831BK1
Rack
Units
8U
10U
13U
16U
6U
8U
13U
16U
16U
Overall Dim’s (in)
H
W
D
16.00 21.00 17.50
19.50 21.00 17.50
24.75 21.00 17.50
30.00 21.00 17.50
10.75 21.00 24.50
16.00 21.00 24.50
24.75 21.00 24.50
30.00 21.00 24.50
30.00 21.00 31.50
Includes rubber feet, black ABS plastic handles, a starter pack of
10-32 clip nuts & matching 1421ABK screws.
Features:
•Constructed of 16 gauge steel.
•Knock-down design.
•Assembly required (flat-pack shipment).
•Simple assembly using one bolt in each
corner to lock the sides to the top and
bottom (hardware included).
•EIA compliant rails with punched round
holes for clip-nuts.
•Suggested load capacity of 800 lb.
•Black powder paint finish.
RCHV Series - Heavy Duty Vented Knockdown A/V Cabinet
Part No.
CABINETS
RCHV1901417BK1
RCHV1901717BK1
RCHV1902217BK1
RCHV1902817BK1
RCHV1901424BK1
RCHV1901724BK1
RCHV1902224BK1
RCHV1902824BK1
RCHV1902831BK1
Rack
Units
8U
10U
13U
16U
8U
10U
13U
16U
16U
Overall Dim’s (in)
H
W
D
16.00 21.00 17.50
19.50 21.00 17.50
24.75 21.00 17.50
30.00 21.00 17.50
16.00 21.00 24.50
19.50 21.00 24.50
24.75 21.00 24.50
30.00 21.00 24.50
30.00 21.00 31.50
Includes rubber feet, black ABS plastic handles, a starter pack of
10-32 clip nuts & matching 1421ABK screws.
Features:
•Constructed of 16 gauge steel.
•Knock-down design.
•Side ventilated for passive air flow.
•Assembly required (flat-pack shipment).
•Simple assembly using one bolt in each
corner to lock the sides to the top and
bottom (hardware included).
•EIA compliant rails with punched round
holes for clip-nuts.
•Suggested load capacity of 800 lb.
•Black powder paint finish.
RCHD Series - Locking Door for RCHS/HCHV Cabinet Series
Part No.
RCHD1910BK1
RCHD1914BK1
RCHD1917BK1
RCHD1928BK1
Rack
Units
6U
8U
10U
16U
Overall Dim’s (in)
H
W
D
8.75
18.88
0.50
14.00
18.88
0.50
17.50
18.88
0.50
28.00
18.88
0.50
Includes mounting hardware
Shown
Fastened
to RSHV Cabinet
Features:
•Constructed of 16 gauge steel.
•Both front & back of “RCHS” rack
cabinets are punched to accept these
doors
•Mounts either right or left hand hinge
(door & cabinet are symmetrical)
•Includes installed lock and two keys
•Black powder paint finish.
See pages 14 to 17 for rack shelves,
cable managers, and more.
RCBS Series - Table Top A/V Cabinet
Part No.
Additional sizes available.
RCBS1900517BK1
RCBS1900717BK1
RCBS1901017BK1
RCBS1901417BK1
RCBS1900324BK1
RCBS1900524BK1
RCBS1900724BK1
RCBS1901024BK1
Rack
Units
3U
4U
6U
8U
2U
3U
4U
6U
Overall Dim’s (in)
H
W
D
7.25
21.00 17.50
9.00
21.00 17.50
12.50 21.00 17.50
16.00 21.00 17.50
5.50
21.00 24.50
7.25
21.00 24.50
9.00
21.00 24.50
12.50 21.00 24.50
Includes rubber feet, black ABS plastic handles, a starter pack of
10-32 clip nuts & matching 1421ABK screws.
6
www.hammondmfg.com
Features:
•Constructed of 16 gauge steel.
•Two pairs of fixed 19” EIA-310-D
compliant round hole punched rails.
•Suggested load capacity of 600 lb.
•Black powder paint finish.
Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide
RCSC Series - Deavy Duty Knockdown Server Cabinet
The RCSC Rack Cabinet features a stacking design that allows for up to three (3) cabinets* to be
stacked atop each other. This Rack Cabinet is fully loaded and includes two (2) pairs of infinitely
adjustable sliding EIA square-hole rails, punch-outs for cable entry and/or fan cooling and comes in a
variety of sizes and depths.
The unique stacking feature enables your cabinet space to grow as your needs do. *Stack up-to
three (3) 12U, two (2) 24U or one (1) of each cabinet atop each other using the required baying kit
(RCSCBAY). The 12U cabinet is a great starter cabinet for any small to medium sized business.
Optional Vented Window door shown.
EASY ASSEMBLY!
Knockdown 16 gauge steel frame with heavy-duty struts contributing to a weightload rating of 1500 lb. Ships unassembled. Four (4) embosses are included with
support for optional levelling feet or casters. Grounding studs provided on body.
Mounting Rails
Includes two (2) pair of 19” mounting EIA-310-D compliant square-hole design
feature U space markings. Rails are infinitely adjustable in depth. Rails are
fabricated of heavy duty fourteen (14) gauge steel, painted smooth black.
Cable Entry &
Management
The top and bottom of the RCSC includes two (2) laser knockouts (per side) for
cable-entry or fans (includes gasket strip material). For 36” depth cabinet side
panels include cable entry knockouts. Also includes a laser knockout rear gland
plate for floor-level cable entry.
Doors
Optional doors are available in solid, tinted acrylic with venting (see above-left)
and high airflow vented. Snap-in hinges can be mounted without having to bolt-on
from inside the cabinet. In addition, the hinges can be mounted on the left or right.
Thermal
Performance
High airflow perforated doors for both front and rear of the cabinet are suggested
for most server applications. Perforated doors meet server manufacturer Free-AirRatio (FAR) requirements at 65%.
Finish
Finished in rugged black powder paint.
Part No.
RCSC1902124BK1
RCSC1904224BK1
RCSC1902131BK1
RCSC1904231BK1
RCSC1902136BK1
RCSC1904236BK1
Units
12U
24U
12U
24U
12U
24U
Max
Overall Overall Mounting
Height Depth
Depth
25”
24“
23.5”
46”
24“
23.5”
25”
31“
29.0”
46”
31“
29.0”
25”
36“
29.0”
46”
36“
29.0”
Includes fifty (50) pack 10-32 cage nuts and screws.
42” Depth option available upon request.
Dual laser knockouts at rear of
cabinet for optional fans or cable
entry when stacked.
CABINETS
OPTIONAL DOORS
RCSC Frame
Simple
Stacking
Optional Locking Doors
Part No.
Description
12U Solid Door w/lock
RCSC19021SDBK1
12U Vented Door w/lock
RCSC19021VDBK1
RCSC19021WDBK1 12U Vented Window Door w/lock
24U Solid Door w/lock
RCSC19042SDBK1
24U Vented Door w/lock
RCSC19042VDBK1
RCSC19042WDBK1 24U Vented Window Door w/lock
Optional Accessories:
Part No.
RCSCATIP
RCSCBAY
Description
Anti-tip Racks
Baying kit - bays (2) RCSC’s together
(vertically or horizontally)
Cabinet ground cable kit
Single (1) Fan kit with grills and cord
Dual (2) Fan kit with grills and cord
GRDKIT04
DNFK1AC120
DNFK2AC120
Optional Casters
For detailed drawings please
visit www.hammondmfg.com
Part No.
1425P
1425BH
Description
Light-duty casters(4)
Heavy duty casters(4)
www.hammondmfg.com
Rated
400 lb
1000 lb
*NOTE: Baying kit (RCSCBAY) is required to
lock cabinets together securely when stacking.
7
Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide
CLC Series - Co-Location Cabinet System
The all new and improved Co-location Rack Cabinet System from
Hammond features four (4) different bay configurations and several roof
options. Whether you are leasing the space or want to restrict access
to sections of your cabinet, the Hammond CLC Series is loaded with
innovative features.
Features:
•One single frame allows multiple bay configurations. Mounting space
includes:
•1-Bay = 44U, 2-Bay = 21U, 3-Bay = 14U, 4-Bay = 10U
•Standard available configurations available in 36”, 42” and 48” depths.
•Vented shelves include rear removable panels for vertical PDU
installations.
•Front and Rear Perforated Doors designed for high air flow.
•Doors include 4-pin combination lock with key override.
•Vertical Cable Managers can be installed either top or bottom. Designed
to accommodate sliding rail mount kit on servers.
•Cabinet top includes removable top panel and provisions for
containment system and cable trough accessories.
CABINETS
Specifications:
•14-gauge welded steel frame; 16-gauge doors and side panel.
•Adjustable depth 19” EIA-Compliant square hole mounting rails.
•Finished in rugged textured black powder paint. Also available in
textured white upon request.
•Tested to nearly double the suggested load rating of 1,800 lbs.
Vertical Cable Management
can easily be moved
to top or bottom.
New and Improved Design!
Visit website for full product details.
Depth (Inches)
1 Bay (44U)
2 Bay (21U)
3 Bay (14U)
4 Bay (10U)
36
CLC1B36BK
CLC2B36BK
CLC3B36BK
CLC4B36BK
42
CLC1B42BK
CLC2B42BK
CLC3B42BK
CLC4B42BK
48
CLC1B48BK
CLC2B48BK
CLC3B48BK
CLC4B48BK
Solid Top Panel
36
CLCST36BK
CLCST36BK
CLCST36BK
CLCST36BK
Solid Top Panel
42
CLCST42BK
CLCST42BK
CLCST42BK
CLCST42BK
Solid Top Panel
48
CLCST48BK
CLCST48BK
CLCST48BK
CLCST48BK
36
CLCBP36BK
CLCBP36BK
CLCBP36BK
CLCBP36BK
Brushed Gasket Bottom Panel
36
CLCBG36BK
CLCBG36BK
CLCBG36BK
CLCBG36BK
Solid Bottom Panel
42
CLCBP42BK
CLCBP42BK
CLCBP42BK
CLCBP42BK
Brushed Gasket Bottom Panel
42
CLCBG42BK
CLCBG42BK
CLCBG42BK
CLCBG42BK
Solid Bottom Panel
48
CLCBP48BK
CLCBP48BK
CLCBP48BK
CLCBP48BK
Brushed Gasket Bottom Panel
48
CLCBG42BK
CLCBG42BK
CLCBG42BK
CLCBG42BK
CLCSP42BK
CLCCMSP
CLCCMSC
CLRHHNG
CLCTRAY
CLHAN-01
GKIT
CLCSP42BK
CLCCMSP
CLCCMSC
CLRHHNG
CLCTRAY
CLHAN-01
GKIT
CLCSP42BK
CLCCMSP
CLCCMSC
CLRHHNG
CLCTRAY
CLHAN-01
GKIT
CLCSP42BK
CLCCMSP
CLCCMSC
CLRHHNG
CLCTRAY
CLHAN-01
GKIT
Step 1
Frame Kit
Overall Dimensions
24” (W) x 83” (H)
Step 2
Top Panel
Step 3
Solid Bottom Panel
Bottom Panel
Step 4
Accessories
8
Easily remove cover panels
to install a vertical PDU.
Single solid side panel for 42 and 42 inch depth cabinets
Cable manager security plate (includes 12 plates, 54 screws, 1 hex key)
Cable manager security cover (includes 2 covers, 4 screws, 1 hex key)
Right-hand door hinge kit.
Cable Tray works as a top cable tray and hides cables view.
Replacement Combination Lock Handle
Cabinet Baying/Ganging/Joining Kit
www.hammondmfg.com
Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide
CLCH Series - Cabinet System with Passive Airflow Chimney
A popular and cost-effective method of containing heat produced by IT equipment is through a passive
hot air chimney. The chimney is fastened to the top-rear of the cabinet and directs hot air from the
cabinet into a ducted plenum (lowered T-bar ceiling). The main purpose of the chimney is to prevent the
hot air from mixing with the cool air entering the front of the cabinets.
Preventing hot air from mixing with cold air is important as it can increase your cooling efficiencies and
eliminate the need for additional cooling. In some cases it can eliminate the demand on the facility
CRAC or CRAH units resulting in significant operating costs.
Features
•Constructed in 14 gauge welded steel frame; 16 gauge doors and side panel.
•Doors include 4-pin combination lock with key override.
•Solid rear door includes gasket material to prevent air leakage.
•Cabinet top includes brushed entry and optional cable trough accessories.
•Finished in rugged textured black powder paint. Also available in textured white upon request.
•Tested to nearly double the suggested load rating of 1,800 lbs.
•Included unassembled adjustable height (up to 40.50”) chimney (ships inside of cabinet).
Overall Dimensions
Part No.
Width
Depth
Per Bay
83.00
83.00
83.00
24.00
24.00
24.00
36.00
42.00
48.00
44U
44U
44U
1-Bay
1-Bay
1-Bay
Mounting Dimensions
Height
Width
Depth
(Per Bay)
77.25
19.00
34.13
77.25
19.00
40.13
77.25
19.00
46.13
Part No.
Description
CLCSP36BK
Single solid side panel for 36 inch depth cabinets
CLCSP42BK
Single solid side panel for 42 and 42 inch depth cabinets
CLCCMSP
Cable manager security plate (includes 12 plates, 54 screws, 1 hex key)
CLCCMSC
Cable manager security cover (includes 2 covers, 4 screws, 1 hex key)
CLCTRAY
Cable Tray works as a top cable tray and hides cables view.
CABINETS
CLCH1B36BK
CLCH1B42BK
CLCH1B48BK
Rack Units
Height
TCS Series - Thermal Containment System
Hammond is pleased to introduce our new cost-effective Thermal
Containment System (TCS Series). The TCS Series is a factory
customized panel system that is used to reduce or eliminate hot air and
cold air from mixing. Typically used in new data centers, the TCS series
can be customized for to fit any ceiling height. By implementing
thermal containment a facility manager can increase cooling
efficiencies and reduce facility operating costs.
The TCS Series was designed to fit our CLC Cabinet Series (shown
on this page) and can be installed upon cabinet delivery or added
during future facility upgrades.
Specifications:
•Extruded aluminium panel frames.
•Lightweight multi-wall polycarbonate panel has been fire rated to
CAN/ULC-S102.2 specifications.
•Foam used throughout containment assembly has been fire rated
to UL94HF1 specifications.
•Aisle doors include integrated ball barring nylon wheel for ease of
movement.
•Panels include fire rated gasket material for air tight seal.
•Sliding Door is finished in textured black powder paint.
Ask your Hammond representative for
more details or visit www.hammondmfg.com
www.hammondmfg.com
9
Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide
C4 Series - Pre-Configured and Modular Data Center Cabinet System
Features:
•Constructed of:
•14 gauge steel (body).
•16 gauge steel (doors and side panels).
•10 gauge tapped rails, 12 gauge square hole punched rails.
•Mounting Rails:
•Zinc-plated mounting rails provide superior surface areas for equipment grounding.
•EIA-310-D compliant 10-32 tapped or square hole punched rails with rack unit labels.
•Rails are easy to move within the cabinet and are infinitely adjusting.
•The 30” wide C4 rails have cable-tie support and pass-through holes.
•Top panel optional include:
•Solid
•Vented
•Fan cutouts
•Pre-installed fan(s) capable of up to 550 CFM
•Side panels:
•Available in both solid and vented for thermal induction.
CABINETS
•Doors available in:
•Solid
•Tinted Acrylic
•Perforated
•Split Perforated (Barn Door)
Q-Assembly helps you easily
create a bill of materials
for the cabinet size and the
components you desire.
Once complete, submit your
configuration for quoting.
•The 30” wide C4 includes:
•Generous cabling space
•Four (4) 3.5” wide cable entry holes on the top
•Support for up to four optional 4” deep vertical cable managers
•Vertical cable managers feature magnetic latching doors, and 3.5” wide x 4” deep cable space.
PRE-CONFIGURED CABINETS:
When you need cabinets quickly, our
pre-assembled C4RR are a great option.
Based off of our most popular requested
configurations, each cabinet is factory
configured and is packaged ready-to-ship.
•Vertical cable trays are available for both 24” and 30“ width cabinets.
•Complies with Seismic UBC Zone-4 standards when used with C4K-Z4 Seismic Bolt Down Kit.
•Four (4) levelling feet are included with support for optional casters.
•Starter pack of 10-32 Screws (and cage nuts when applicable).
•Grounding studs provided on frame as well as side panels and doors.
•Finished in textured black powder paint.
•Suggested load capacity of 2,000 lb.
C4RR “D” Series:
C4RR “D” Series Specific Components:
•Two (2) Pairs of adjustable square hole rails
•One (1) Plexi Front Door
•One (1) Perforated Rear Door
•One (1) Fan cutout Top Panel
•One (1) Vertical Tray with PDU Mounting
Part No.
C4RR247331DBK1
C4RR247336DBK1
C4RR247342DBK1
C4RR247731DBK1
C4RR247736DBK1
C4RR247742DBK1
C4RR307731DBK1
C4RR307736DBK1
C4RR307742DBK1
Overall Dimensions
Height
Width
Depth
78.00
24.00
31.50
78.00
24.00
36.00
78.00
24.00
42.00
83.75
24.00
31.50
83.75
24.00
36.00
83.75
24.00
42.00
83.75
30.00
31.50
83.75
30.00
36.00
83.75
30.00
42.00
Rack
Units
42U
42U
42U
44U
44U
44U
44U
44U
44U
Mounting Depth
Height
Width
Depth
73.50
19.00
29.50
73.50
19.00
34.00
73.50
19.00
40.00
77.00
19.00
29.50
77.00
19.00
34.00
77.00
19.00
40.00
77.00
19.00
29.50
77.00
19.00
34.00
77.00
19.00
40.00
Overall Dimensions
Height
Width
Depth
78.00
24.00
31.50
78.00
24.00
36.00
78.00
24.00
42.00
83.75
24.00
31.50
83.75
24.00
36.00
83.75
24.00
42.00
83.75
30.00
31.50
83.75
30.00
36.00
83.75
30.00
42.00
Rack
Units
42U
42U
42U
44U
44U
44U
44U
44U
44U
Mounting Depth
Height
Width
Depth
73.50
19.00
29.50
73.50
19.00
34.00
73.50
19.00
40.00
77.00
19.00
29.50
77.00
19.00
34.00
77.00
19.00
40.00
77.00
19.00
29.50
77.00
19.00
34.00
77.00
19.00
40.00
C4RR “S” Series:
C4RR “S” Series Specific Components:
•Two (2) Pairs of adjustable square hole rails
•One (1) Perforated Front Door
•One (1) Split Perforated Rear Door
•One (1) Fan cutout Top Panel
•Two (2) Vertical Trays with PDU Mounting
All configurations include:
•One (1) Welded C4 Cabinet Frame with
Top Cable Entry Holes
•Two (2) Removable Side Panels
(with 1/4 turn latches)
10
Part No.
C4RR247331SBK1
C4RR247336SBK1
C4RR247342SBK1
C4RR247731SBK1
C4RR247736SBK1
C4RR247742SBK1
C4RR307731SBK1
C4RR307736SBK1
C4RR307742SBK1
www.hammondmfg.com
Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide
DCZ4 Series - Telcordia® GR-63 Seismic Zone 4 Certified Cabinet
Features:
•14 gauge steel (body), 12 gauge steel corner braces and 16 gauge doors and side panels.
•19” EIA-310-D compliant 10-32 tapped or square hole punched rails. (Rails include rack unit labels)
•Rugged design engineered to perform in the most critical seismic environments when secured using
C4K-Z4 seismic bolt down kit.
•Includes generous stud locations for grounding and bonding applications.
•Compatible with standard C2 top panels with options that include Solid, Vented, Fan cutouts.
•Pre-installed fan(s) capable of up to 550 CFM.
•Flush-mount doors come with 3-point latching and stiffeners to reduce flexing and bowing while
increasing cabinet security. Doors available in Solid, Window and 63% Perforated punch pattern.
•Handle features 4-pin combination lock with key override. Also compatible with electronic locking
options.
•Ganging holes allow for joining multiple cabinets.
•Finished in sand-textured black powder paint.
Cable Management:
•Includes four (4) 3.5” top cable access holes.
•Various bottom panels allow different cable management options.
•Corner braces include mounting for cable tray and outlet strips.
•Support for up to four optional 4” deep vertical cable managers.
Independently tested and certified to exceed established Seismic Zone 4
Telcordia® GR-63-CORE testing standards. Watch the seismic test on our website or
scan the QR Code above.
Dynamic (seismic) suggested load capacity of 1,000 lb. (453.6 kg) of equipment
installed and 100 lb. (45.4 kg) of overhead cable weight when secured using
the C4K-Z4 seismic bolt down kit.
CABINETS
Pre-Assembled Cabinet:
•One (1) DCZ4F307742BK - DCZ4 Cabinet Frame
•Two (2) C4PR77SZPL - Pair of Square Hole Rails
•Two (2) DCZ4SP7742BK - DCZ4 Side Panels
•Two (2) DCZ4VD3077BK - DCZ4 63% Vented Doors
•One (1) C2T2436SBK1 - Standard C2 Solid Top Panel
Overall Dimensions
Rack
Mounting Depth
Part No.
Height
Width
Depth
Units
Height
Width
Depth
83.00
30.00
42.00
44U
77.06
19.00
35.75
DCZ4A307742BK
Also sold in individual components. Visit www.hammondmfg.com for more details.
Electronic Locking
When network security is a priority and a mechanical locking mechanism will
not suffice, have peace of mind that Hammond has options to increase your
cabinet infrastructure security. Hammond has formed a partnership with handle
manufacturers Southco® and TZ® to ensure the Hammond cabinets are
compatible with their state-of-the-art access control systems.
Whether your facility requires standard audit trail, proximity access or military
spec biometrics, both latching systems provide you a level electronic access
control that can integrate into your network or facility security system.
The electronic locking rack handle provides the functionality of a manual latching
system with the added benefit of electronic locking for access control and remote
monitoring. It can be combined with any access control device for a basic
self-contained electronic access solution.
The Hammond CLC, DC100 and DCZ4 Cabinet Series have been designed
to be compatible with both latching systems.
TZ® Locking mechanisms are compatible
with most Hammond cabinets and enclosures.
Ask your representative for details.
Southco and TZ trademarks and copyrights are property of their respective owners.
www.hammondmfg.com
11
Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide
EN4SD Series - NEMA 4/12 Swing Out Wall Mount Cabinet
•
•
•
•
•
•
•
•
•
•
•
Constructed of 14 gauge steel.
Smooth continuous welded seams without knockouts, cutouts or holes.
Includes one (1) pair of adjustable EIA compliant 10-32 tapped 19” mounting rails.
Mounting rails also include cable pass through holes.
Heavy wall mounting base for cable entry with collar stud provision for optional inner panel.
Wall base can be mounted with optional external mounting feet.
Interior latch releases center section for added security, no tools required.
Solid and Window door are provided with 2 or 4 point combination key & padlock handle.
Bonding studs provided on door, body and wall base.
Window door constructed with UV resistant polycarbonate material.
Finished in RAL7035 light Gray.
Solid Door
Part No.
EN4DH162415LG
EN4DH202415LG
EN4DH242415LG
EN4DH362415LG
EN4DH482415LG
EN4DH162424LG
EN4DH202424LG
EN4DH242424LG
EN4DH362424LG
EN4DH482424LG
Window Door
Overall Dimensions
Part No.
Height Width Depth
24.00
15.01
EN4DH162415WLG 16.00
24.00
15.01
EN4DH202415WLG 20.00
24.00
15.01
EN4DH242415WLG 24.00
24.00
15.01
EN4DH362415WLG 36.00
24.00
15.01
EN4DH482415WLG 48.00
24.00
24.00
EN4DH162424WLG 16.00
24.00
24.00
EN4DH202424WLG 20.00
24.00
24.00
EN4DH242424WLG 24.00
24.00
24.00
EN4DH362424WLG 36.00
24.00
24.00
EN4DH482424WLG 48.00
Rack
Units
7U
10U
12U
19U
26U
7U
10U
12U
19U
26U
Mount
Height
12.25
17.50
21.00
33.25
45.50
12.25
17.50
21.00
33.25
45.50
Center
Depth
9.51
9.51
9.51
9.51
9.51
18.50
18.50
18.50
18.50
18.50
EN4SD Series - NEMA 4/12 Wall Mount Cabinet with Optional Swing Frame
INDUSTRIAL IT
• Constructed of 14 gauge steel.
• Smooth continuous welded seams without knockouts, cutouts or holes.
• Optional Swing frame is constructed of 12 gauge steel, painted smooth black and includes EIA
compliant round hole mounting (for use with clip nuts).
• Solid and Window door options are provided with a quarter turn latch. Order Part No. 2WKL to
upgrade the front door to a Locking Wing Knob.
• Bonding studs provided on door, body and wall base.
• Window door constructed with UV resistant polycarbonate material.
• Finished in RAL7035 light Gray.
Shown with optional Swing Frame (ESF Series)
installed. Some assembly is required.
Solid Door
Part No.
EN4SD24246LG
EN4SD24248LG
EN4SD30248LG
EN4SD36248LG
EN4SD242412LG
EN4SD302412LG
EN4SD362412LG
EN4SD242416LG
EN4SD302416LG
EN4SD242420LG
EN4SD302420LG
EN4SD302424LG
Window Door
Part No.
EN4SD24246WLG
EN4SD24248WLG
EN4SD30248WLG
EN4SD242412WLG
EN4SD302412WLG
EN4SD242416WLG
EN4SD242420WLG
EN4SD302420WLG
Overall Dimensions
Height Width Depth
24
24
6
24
24
8
30
24
8
36
24
8
24
24
12
30
24
12
36
24
12
24
24
16
30
24
16
24
24
20
30
24
20
30
24
24
Optional Swing Frame
Part No.
Rack Units
ESF2424
11U
ESF2424
11U
ESF3024
14U
ESF3624
17U
ESF2424
11U
ESF3024
14U
ESF3624
17U
ESF2424
11U
ESF3024
14U
ESF2424
11U
ESF3024
14U
ESF3024
14U
Are you looking for the factory finish? We can help!
When a standard product or assembly just won’t do, Hammond can design a product modified to your specifications.
Modification means we use a standard Hammond design and build it to your requirements. While we can customize
the product features, you aren’t paying for a custom price. Learn more on page 18.
12
www.hammondmfg.com
Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide
PCJ Series - Type 4X Non-Metallic Enclosures for Wireless Access Points
Designed to insulate and protect wireless access points in both indoor and outdoor conditions. The
wall mounting flange provides easy mounting to walls and surfaces.
•
•
•
•
•
•
•
•
Constructed of rugged polycarbonate thermoplastic enclosure with matching cover.
Enhanced UV inhibitors protect against outdoor weathering.
Threaded brass inserts are for optional inner panel mounting. Mounting hardware is included.
Door fasteners include a provision for padlocking on Snap Latches.
Molded hinge with 316 stainless steel pin.
Captive oil resistant gasket provides a positive seal.
Operating temperatures between 130°C and - 35 °C (266°F to - 31 °F).
Polycarbonate material has a light gray finish.
Solid Door
Part No.
PCJ664LF
PCJ864LF
PCJ1084LF
PCJ12106LF
PCJ14126LF
Window Door
Overall Dimensions
Part No.
Height Width Depth
PCJ664CCLF
5.93
6.16
3.98
PCJ864CCLF
7.94
6.16
3.98
PCJ1084CCLF
9.93
8.15
3.98
PCJ12106CCLF 11.92 10.15
5.98
PCJ14126CCLF 13.94 12.16
5.98
Panel/Equipment
Dimensions
Height
Width
4.81
4.81
6.75
4.88
8.75
6.88
10.75
8.88
12.75
10.88
Optional
Inner Panel
Part No.
PCJA0505
PCJA0705
PCJA0907
PCJA1109
PCJA1311
Inner panel is constructed of 0.080 type 5052 H-32 aluminium.
HDME Series - Type 12 Dust Tight Cabinet
The Hammond Data Modular Enclosure (HDME) System provides a vast array of features and
advantages supported by Hammond Manufacturing’s reliable quality and service.
Configuration
•
•
•
•
•
One (1) Welded frame with pre-installed leveling feet
One (1) Removable solid top panel with mounting points for optional lifting eye-bolts
Two (2) Pairs of EIA-Compliant Square Hole Rails
One (1) Removable bottom panel w/gland plates
Two (1) Solid doors with die-cast swing handle along with pre-installed gland plates
Construction
•
•
•
•
•
•
Formed 14 gauge steel.
Fully welded frame with 25mm hole pattern for superior mounting flexibility.
Seamless foam in place gasket.
Frames can be joined together with an optional joining kit.
Doors can be easily removed, reversed, and/or interchanged.
Bonding and grounding studs are provided for all doors and panels.
INDUSTRIAL IT
The HDME product line combines the rugged NEMA 12 housing of the Hammond HME Series with
a Data/Comm designed configuration to serve you dust-tight requirements. The modular design
permits interchangeable components and ability to join cabinets together while maintaining an
industrial dust-tight seal.
Finish
• Phosphatized and finished in textured black powder coating.
• Mounting Rails are unpainted galvanized 12 gauge steel.
Shown with optional NEMA 12 Filter Fan installed.
Side panel removed for demonstration purposes only.
To learn more about our NEMA 12 Data/Comm Configurations, please
contact your local Hammond Representative.
www.hammondmfg.com
13
Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide
2-Post Mounting Shelves:
Screw and Cage Nut Combo Pack
Part No.
RASU190107UBK1
RASU190115BK1
RASU190315BK1
RASU190320BK1
RASU190515BK1
Description
Solid Rack Shelf
Solid Rack Shelf
Solid Rack Shelf
Solid Rack Shelf
Solid Rack Shelf
Rack
Units
1U
1U
2U
2U
3U
RASV190107UBK1
RASV190115BK1
RASV190315BK1
RASV190320BK1
RASV190515BK1
RASV190520BK1
Vented Rack Shelf
Vented Rack Shelf
Vented Rack Shelf
Vented Rack Shelf
Vented Rack Shelf
Vented Rack Shelf
1U
1U
2U
2U
3U
3U
7.0
15.0
15.0
20.0
15.0
20.0
-
40
40
100
100
200
200
RACSV190315BK1
RACSV190515BK1
RACSV190715BK1
Clamping Rack Shelf
Clamping Rack Shelf
Clamping Rack Shelf
2U
3U
4U
15.0
15.0
15.0
-
100
200
200
25 10-32 Cage Nuts
1421CNA25
1421CNA100 100 10-32 Cage Nuts
1421CNA250 250 10-32 Cage Nuts
DNDMS19BK1
Centered Solid Shelf
2U
19.5
-
200
DNDMV19BK1
Centered Vented Shelf
2U
19.5
-
200
1421N25
1421N100
1421N250
25 10-32 Clip Nuts
100 10-32 Clip Nuts
250 10-32 Clip Nuts
Centered Depth Adapter
Centered Depth Adapter
Centered Depth Adapter
Centered Depth Adapter
2U
2U
2U
2U
15.0
20.0
26.0
31.0
-
400
400
400
400
H1224S25
H1224S100
H1224S500
25 12-24
100 12-24
500 12-24
RDAB2U15
RDAB2U20
RDAB2U26
RDAB2U31
Depth Mount Rated
(in)
Depth (lbs)
7.0
40
15.0
40
15.0
100
20.0
100
15.0
200
RDA1U4
Rail Depth Adapter
1U
4.0
-
-
RDA2U4
Rail Depth Adapter
2U
4.0
-
-
4-Post Mounting Shelves & Drawers:
RSVS1918BK1
RSVS1921BK1
RSVS1926BK1
RSUS1918BK1
RSUS1921BK1
RSUS1926BK1
RSLIDEEX
RMASU1925BK1
RMASUHD1925BK1
RMASU1930BK1
Sliding Vented Shelf
Sliding Vented Shelf
Sliding Vented Shelf
18
21
26
20
22
28
120
120
120
Sliding Solid Shelf
1U
18
20
120
Sliding Solid Shelf
1U
21
22
120
Sliding Solid Shelf
1U
26
28
120
Increases RSVS/ RSUS Mounting-Depth by 14 in
Adjustable Solid Shelf
Adjustable Solid Shelf
Adjustable Solid Shelf
Adjustable Vented Shelf
RMASV1925BK1
RMASVHD1925BK1 Adjustable Vented Shelf
RMASVHD1936BK1 Adjustable Vented Shelf
1U
2U
1U
25
25
30
25 - 35
25 - 35
30 - 40
75
200
75
1U
2U
2U
25
25
36
25 - 35
25 - 35
36 - 48
75
200
200
RAAB2436BK
Adjustable Angle Bracket
1U
24
24 - 36
200
RAAB3648BK
Adjustable Angle Bracket
1U
36
36 - 48
200
Locking Rack Drawer
Locking Rack Drawer
Locking Rack Drawer
Locking Rack Drawer
2U
2U
3U
4U
12
22
16
22
12
22
16
22
120
120
120
120
Keyboard Drawer
2U
16.0
6 - 18
-
RDRW1900312BK1
RDRW1900322BK1
RDRW1900516BK1
RDRW1900722BK1
ACCESSORIES
14
1U
1U
1U
RAKS19BK1
RSKS19005BK1
RMS193BK1
Swivel Keyboard Shelf
2U
15.0
34.8”
120 lb
3-in-1 Shelf and
Keyboard Drawer
3U
17.0
-
-
We have a huge selection of standard accessories to
choose from. Take a look at www.hammondmfg.com
www.hammondmfg.com
Part No.
1421CNABK50
1421CNABK100
Qty
50
100
Tap
10-32
10-32
Tap
10-32
10-32
10-32
Type
Screws
Screws
Screws
25 10-32
H1032BK25
H1032BK100 100 10-32
H1032BK500 500 10-32
Screws
Screws
Screws
Mounting Hardware
Part No.
1421ABK25
1421ABK100
1421ABK500
Qty
25
100
500
Screws
Screws
Screws
25 12-24 Cage Nuts
1421CNC25
1421CNC100 100 12-24 Cage Nuts
Filler Panels
Improve cooling efficiency and visual appearance
with blanking/ filler panels. Available from 1U
to 18U in a variety of colours, materials and
configurations.
Part No.
PBPS19001BK2
PBPS19003BK2
PBPS19005BK2
PPFS19001BK2
PPFS19003BK2
PPFS19005BK2
PBFS19001BK2
PBFS19003BK2
PBFS19005BK2
PBPA19001BK2
PBPA19003BK2
PBPA19005BK2
PVSS19001BK2
PVSS19003BK2
PVSA19001BK2
PVSA19003BK2
Description
1U Solid Steel Panel
2U Solid Steel Panel
3U Solid Steel Panel
1U Steel Perforated Panel
2U Steel Perforated Panel
3U Steel Perforated Panel
1U Formed Solid Steel Panel
2U Formed Solid Steel Panel
3U Formed Solid Steel Panel
1U Aluminum Solid Panel
2U Aluminum Solid Panel
3U Aluminum Solid Panel
1U Steel Slotted Panel
2U Steel Slotted Panel
1U Aluminum Slotted Panel
2U Aluminum Slotted Panel
Brushed Horizontal
Cable Manager
Part No.
BRP1UBK
BRP2UBK
Description
1U Brushed Panel
2U Brushed Panel
Rack Mount Monitor Rack
•Heavy duty 12 gauge steel.
•3U for small screens 15”- 27”.
•10U for large screens 32” and up.
•Includes monitor screws.
•Black powder paint finish.
Part No.
RMMB193UBK3
RMMB1910UBK3
Description
3U - VESA MIS-D
10U - VESA MIS-F
Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide
Horizontal Cable Management
Part No.
RB-HRM1
RB-HRM2
Fan Components
Description
1U Econo Horizontal Ring Manager
2U Econo Horizontal Ring Manager
Part No.
Description
DNFK1AC120
Single (1) Fan kit with grills and
cord - 100 CFM
DNFK2AC120
Dual (2) Fan kit with grills and cord
- 200 CFM
PCMBS19001BK1 1U Horizontal Ring Manager
PCMBS19003BK1 2U Horizontal Ring Manager
PCMDD19001BK1 1U Horizontal Hinged
PCMDD19003BK1 2U Horizontal Hinged
PCMDD19005BK1 3U Horizontal Hinged
PCMDS19001BK1 1U Horizontal Hinged Metal Finger
PCMDS19003BK1 2U Horizontal Hinged Metal Finger
PCMDS19005BK1 3U Horizontal Hinged Metal Finger
RDCM2136BK
2U Adjustable Depth Cable Manager
RDCM3348BK
2U Adjustable Depth Cable Manager
PCMBV19001BK1 1U Horizontal Hook & Loop
CLB194BK
CLB192BK
CLB190BK
0U 4” Deep Lacing Bar (10-Pack)
0U 2” Deep Lacing Bar (10-Pack)
0U Lacing Bar (10-Pack)
HCM194BK
HCM192BK
HCM190BK
0U 4” Deep L-Bar (10-Pack)
0U 2” Deep L-Bar (10-Pack)
0U L-Bar (10-Pack)
0U Lacing Bar with 48” length of
Hook and Loop
HCM190UBK1
PCMT19003BK1
2U Rack Panel Mount Trough
TS96
96” length strip of Hook and Loop
Rack Mount Fan Trays
•1U 19” Rack Mount Fan Trays
•Ideal solution for hot spots
•Integral finger guards
•Circuit breaker protection
•Black powder paint finish
Part No.
FT300HA1BK
FT600HA1BK
FT900HA1BK
Description
3-Fan,300 CFM, ON/OFF Switch
6-Fan,600 CFM, ON/OFF Switch
9-Fan,900 CFM, ON/OFF Switch
Max Mount Depth
Unlimited
19.2”
24.7”
Casters and Dollies
Part No.
RRLDCASTER
1425BM
1425PHD
1425BH
Description
Open Frame Rack Casters
Medium Duty Cabinet Casters
Medium Duty Cabinet Casters
Heavy Duty Cabinet Casters
Weight
Rating
(lb)
800
700
800
1050
Height
Added
(in)
3.75
4.38
2.50
4.38
Rack Unit Label
Part No.
RULBK
Vertical Cable Management
44U 8” x 8” Dual-Door Metal Finger
FRCM44U128
44U 12” x 8” Dual-Door Metal Finger
FRCMCD
Tooless Metal Cable Divider
FRCMSPOOL
Tooless Metal Cable Spool
CMRC34BK1
1.5” x 3” x 4” Cable Ring
CMRC36BK1
1.5” x 3” x 6” Cable Ring
CMRC126BK1
1.5” x 12” x 6” Cable Ring
RRCM44UD
44U 6” x 5” Hinged Door
RRCM844UD
44U 8” x 6” Hinged Door
RRCM1244UD
44U 12” x 6” Hinged Door
CMRBK1
CMR3BK1
CMRB
1U Single Cable Ring - 1.25” Wide
1U Single Cable Ring - 3.00” Wide
1U Tie Down Rack
VCT28
VCT42
VCTPDU73
VCTPDU77
VCTPDU78
16U Universal Cable Tray
24U Universal Cable Tray
42U Tooless PDU Cable Tray
44U Tooless PDU Cable Tray
45U Tooless PDU Cable Tray
FRCMCH88
FRCMCH128
RRCMCH65
RRCMCH86
RRCMCH126
36” High Cable Chimney for FRCM
36” High Cable Chimney for FRCM
36” High Cable Chimney for RRCM
36” High Cable Chimney for RRCM
36” High Cable Chimney for RRCM
Copper Busbar
•19” and 23” mounting widths.
•Includes (2) Ø 0.31 ground lug holes.
•Mounts directly to EIA mounting rails.
•Constructed of Solid 0.188” Copper Bar.
•Includes (10) 10-32 drilled and tapped holes spaced at 1”.
Part No.
GRDBAR19
GRDBAR23
Description
19” Horizontal Rack Mount Copper Busbar
23” Horizontal Rack Mount Copper Busbar
Ground Lug
Part No.
DNGL
Description
Dual L16 type aluminum lug
DIN Rail Rack Bracket
•19” mounting widths.
•Includes 17.18” wide DIN Rail.
•Mounts directly to EIA mounting rails.
•Slots allow front/back adjustments of DIN rail.
Part No.
RMAD19003BK
www.hammondmfg.com
Description
19” DIN Rail Rack Bracket
ACCESSORIES
FRCM44U88
Description
Universal Rack Unit Label - up to 49U
15
Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide
# of Outlets
All Outlet Strips on this page include a 125 VAC
circuit breaker, use 1U (1.75”) panel space, and
are finished in black.
Part No.
Front Rear
15A Outlet Strip with FRONT Mounted Receptacles
1582H6A1BK
1582H6B1BK
1582H8A1BK
1582H8B1BK
1582T6A1BK
1582T6B1BK
1582T8A1BK
1582T8B1BK
ACCESSORIES
16
Power Indication
Pilot Light Cord
Switch
Only
Length
Plug
Type
Amp
Rating Surge Finish
6
6
8
8
6
6
8
8
-
Illuminated
Illuminated
Illuminated
Illuminated
-
Yes
Yes
Yes
Yes
6ft
15ft
6ft
15ft
6ft
15ft
6ft
15ft
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
15A
15A
15A
15A
15A
15A
15A
15A
-
Black
Black
Black
Black
Black
Black
Black
Black
15A Outlet Strip with REAR Mounted Receptacles
1583H6A1BK
1583H6B1BK
1583H8A1BK
1583H8B1BK
1583T6B1BK
1583T8A1BK
1583T8B1BK
(Front)
1583H6A1SBK
1583H6B1SBK
-
6
6
8
8
6
8
8
6
6
Illuminated
Illuminated
Illuminated
Illuminated
Illuminated
Illuminated
Yes
Yes
Yes
-
6ft
15ft
6ft
15ft
15ft
6ft
15ft
6ft
15ft
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
15A
15A
15A
15A
15A
15A
15A
15A
15A
Yes
Yes
Black
Black
Black
Black
Black
Black
Black
Black
Black
15A Outlet Strip with FRONT AND REAR Mounted Receptacles
1583H6A1BKX
1583H6B1BKX
1583T6A1BKX
1583H12A1BKX
1583H12B1BKX
1583T12A1BKX
(Rear)
2
2
2
6
6
6
4
4
4
6
6
6
Illuminated
Illuminated
Illuminated
Illuminated
-
Yes
Yes
6ft
15ft
6ft
6ft
15ft
6ft
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
15A
15A
15A
15A
15A
15A
-
Black
Black
Black
Black
Black
Black
15A Outlet Strip with 90 Degree Offset Receptacles
1582H6A1BKRA
1582H6B1BKRA
1582T6A1BKRA
1582T6B1BKRA
1583T12A1SBKRAX
1583H6A1BKRA
1583H6B1BKRA
1583T6A1BKRA
1583T6B1BKRA
6
6
6
6
6
-
6
6
6
6
6
Illuminated
Illuminated
Illuminated
Illuminated
-
Yes
Yes
Yes
Yes
Yes
6ft
15ft
6ft
15ft
6ft
6ft
15ft
6ft
15ft
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
15A
15A
15A
15A
15A
15A
15A
15A
15A
Yes
-
Black
Black
Black
Black
Black
Black
Black
Black
Black
20A Outlet Strips with FRONT OR REAR-Mounted Receptacles
1589H6D1BKRF
1589H6F1BKRF
1589H6G1BKRF
1589H8G1BKRF
1589T6D1BKRF
1589T6G1BKRF
1589T8F1BKRF
1589H6D1BKRR
1589H6F1BKRR
1589H6G1BKRR
1589H8G1BKRR
1589T6D1BKRR
1589T6F1BKRR
1589T6G1BKRR
6
6
6
8
6
6
8
-
6
6
6
8
6
6
6
No Light
No Light
No Light
No Light
No Light
No Light
No Light
No Light
-
Yes
Yes
Yes
Yes
Yes
Yes
15ft
6ft
15ft
15ft
15ft
15ft
6ft
15ft
6ft
15ft
15ft
15ft
6ft
15ft
L5-20P
5-20P
5-20P
5-20P
L5-20P
5-20P
5-20P
L5-20P
5-20P
5-20P
5-20P
L5-20P
5-20P
5-20P
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
-
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
15 & 20A Outlet Strip with built-in Ammeter
1582H6A1BKAM
1583H6A1BKAM
1583T6A1BKAM
1583T6B1BKAM
1589H6F1BKRRAM
1589T6C1BKRRAM
1589T6F1BKRRAM
6
-
6
6
6
6
6
6
Illuminated
Illuminated
No Light
-
Yes
Yes
Yes
Yes
6ft
6ft
6ft
15ft
6ft
6ft
6ft
5-15P
5-15P
5-15P
5-15P
5-20P
L5-20P
5-20P
15A
15A
15A
15A
20A
20A
20A
-
Black
Black
Black
Black
Black
Black
Black
With over 500 skus of Outlet Strips,
we could not possibly add them all
into this product guide.
For additional sizes and options, please visit
www.hammondmfg.com
www.hammondmfg.com
Hammond Manufacturing - Data/Comm & Security, Quick Reference Product Guide
Part No.
Part No.
Pilot Light
On/Off Switch
15A Vertical Outlet Strips
15851T6A1
15851H6A1
15851T6B1
15851H6B1
15852T8A1
15852H8A1
15852T8B1
15852H8B1
15853T6A1
15853H6A1
1585T8A1
1585H8A1
1585T10A1
1585H10A1
1585T10B1
1585H10B1
1585T10B1S
1585H10B1S
1586T10A1
1586H10A1
1586T10B1
1586H10B1
1586T12A1
1586H12A1
1587T10A1
1587H10A1
1587T12A1
1587H12A1
1587T12C1
1587H12C1
1587T12D1
1587H12D1
1588T12A1
1588H12A1
1588T12A1BK
1588H12A1BK
1588T12B1BK
1588H12B1BK
Includes hardware required to mount to a
cabinet, unistruts or open frame racks.
Additional kits can be purchased by ordering
Part No. 1585CLIP
20A Vertical Outlet Strips
1589T48D1
1589H48D1
1589T48F1
1589H48F1
1589T48G1
1589H48G1
1589T48D116
1589H48D116
1589T48F116
1589H48F116
1589T48G116
1589H48G116
1589T60C1
1589H60C1
1589T60D1
1589H60D1
1589T60F1
1589H60F1
1589T60G1
1589H60G1
1589T70C1
1589H70C1
1589T70D1
1589H70D1
1589T70F1
1589H70F1
1589T70G1
1589H70G1
1589T70D124
1589H70D124
1589T70F124
1589H70F124
1589T70G124
1589H70G124
1589T77C1
1589H77C1
1589T77D1
1589H77D1
1589T77F1
1589H77F1
1589T77G1
1589H77G1
# of Overall Cord
Surge
Outlets Length Length Protection
Plug
Type
Amp
Rating
Finish
6
6
8
8
6
8
10
10
10
10
10
12
10
12
12
12
12
12
12
18”
18”
24”
24”
36”
48"
48"
48"
48”
60”
60”
60”
70”
70”
70”
70”
77”
77”
77”
6ft
15ft
6ft
15ft
6ft
6ft
6ft
15ft
15ft
6ft
15ft
6ft
6ft
6ft
6ft
15ft
6ft
6ft
15ft
No
No
No
No
No
No
No
No
Yes*
No
No
No
No
No
No
No
No
No
No
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
L5-15P
L5-15P
5-15P
5-15P
5-15P
15A
15A
15A
15A
15A
15A
15A
15A
15A
15A
15A
15A
15A
15A
15A
15A
15A
15A
15A
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Black
Black
8
8
8
16
16
16
10
10
10
10
10
10
10
10
24
24
24
12
12
12
12
48"
48"
48"
48"
48"
48"
60"
60"
60"
60"
70"
70"
70"
70"
70"
70"
70"
77"
77"
77"
77"
15ft
6ft
15ft
15ft
6ft
15ft
6ft
15ft
6ft
15ft
6ft
15ft
6ft
15ft
15ft
6ft
15ft
6ft
15ft
6ft
15ft
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
L5-20P
5-20P
5-20P
L5-20P
5-20P
5-20P
L5-20P
L5-20P
5-20P
5-20P
L5-20P
L5-20P
5-20P
5-20P
L5-20P
5-20P
5-20P
L5-20P
L5-20P
5-20P
5-20P
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
20A
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
Silver
When mounting to HWM series use
Part No. HWMPCLIP
See page 9 for details.
Are you looking for an IP Managed or enhanced PDU? Our alliance with power distribution
industry leaders gives you access to the products you need,
mounted within the Hammond Cabinet you trust.
If we do not have an outlet strip that meets your needs, we can help find you one that will.
Please contact your Hammond Mfg representative for more information.
Part No.
1584H6A1
1584H6A1S
1584H6B1
1584H6B1S
1584H8A1
1584H8B1
1584T6A1
1584T6A1S
1584T6B1
1584T8A1
1584T8B1
Power Indication
Lighted
Pilot
# of
On/Off
Light
Outlets Switch
Only
6
Yes
6
Yes
6
Yes
6
Yes
8
Yes
8
Yes
6
Yes
6
Yes
6
Yes
8
Yes
8
Yes
www.hammondmfg.com
Surge
Protection
No
Yes
No
Yes
No
No
No
Yes
No
No
No
Cord
Length
6ft
6ft
15ft
15ft
6ft
15ft
6ft
6ft
15ft
6ft
15ft
Plug
Type
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
Amp
Rating
15A
15A
15A
15A
15A
15A
15A
15A
15A
15A
15A
Finish
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
ACCESSORIES
15A Industrial & Commercial
Grade Outlet Strip
17
When a standard product just won’t do!
When a standard product just won’t do, Hammond can design a product modified to your specifications. Modification
means we are building off of a standard Hammond product. While we can customize the product features, you aren’t
paying for a custom price.
See our five (5) modification options below as well as modifications that we have built for other customers.
PAINT / COLOUR
HOLES / CUTOUTS
BONDING / STUDS
Choose from one of over
10 stock colour options, or
provide us with a CMYK,
RGB, Pantone® or RAL
colour code to match.
Precision punching and
laser equipment can
insert optional Knockouts,
venting and unique
patterns.
Forget the hassle of field
installation. Choose from
mounting options, ground,
bonding and PEM studs
and nuts.
Based on the
Hammond C2 Cabinet Series
18
SIZE CHANGES
Whether you have a
drawing on a napkin or
a CAD drawing. If you
required specific product
dimensions and features
we can help!
Based on the
Hammond C4 Cabinet Series
www.hammondmfg.com
OTHER OPTIONS
We can factory install
shelving, fans, outlet strips,
apply screen printing and
drop ship the product,
neatly packed on a skid.
Based on the
Hammond HWM Swing Out
Wall Mount Cabinet Series
Over 80 Years of Quality Racks & Cabinets
Hammond Manufacturing Co. Ltd., provides voice, data, and security products and service solutions
that optimise, store, and secure technology equipment. Hammond manufactures and markets
cabinet, enclosure systems and accessories; security systems, such as electronic locking systems;
and grounding and bonding products. The company also offers power management products that
include power distribution units, power strips, and in-line meters; two and four-post racking systems;
and wall-mount open and enclosed systems.
Its products are used in physical security, system integration, and regulatory compliance
applications in government, education, finance, retail, healthcare, manufacturing and data center
sectors.
Hammond markets its products through a network of distributors, contractors and integrators
worldwide.
Global Headquarters and Metal Fabrication Facility
Guelph, Ontario, Canada
US Facility, Sales and Distribution Center
Cheektowaga, New York, USA
Quebec Sales Office
Laval, Quebec, Canada
With our Global Headquarters and metal fabrication facility in Guelph, Ontario,
Canada; Hammond has additional manufacturing facilities in the United States,
Asia, and Europe. To support our global customer base we have sales offices and
distribution facilities in Canada, US, China, Australia and the UK.
www.hammondmfg.com
19
Canada Toll-Free
Support Line:
USA Toll-Free
Support Line:
(877) 535-3282
(800) 526-2266
Français:
Local:
(514) 343-9010
(716) 630-7030
Locations in Canada:
Locations in USA:
Hammond Manufacturing Co. Ltd.
394 Edinburgh Rd, North,
Guelph, Ontario N1H 1E5
Canada
Phone: (519) 822-2960
[email protected]
Hammond Manufacturing Co. Inc.
475 Cayuga Rd
Cheektowaga, New York, 14225
USA
Les Fabrications Hammond (Québec)
985 Rue Bergar
Laval, Quebec, H7L 4Z6
Canada
Follow us on social
media. Just search
for hammondmfg
Facebook
Twitter
Google+
Linked In
YouTube
Phone: (716) 630-7030
[email protected]
Phone: (450) 975-1884
[email protected]
Locations in Europe:
Locations in Australia:
Hammond Electronics Limited
1 Onslow Close
Kingsland Business Park
Basingstoke, Hampshire, RG24 8QL
England
Hammond Electronics Pty. Limited
11-13 Port Road
Queenstown, SA, 5014
Australia
Phone: +44 1256 812812
[email protected]
Distributed by:
Phone: +61 8 8240 2244
[email protected]
Learn more at:
hammondmfg.com
Design and Specifications are subject to change without notice © Hammond Manufacturing Company Limited
Printed in Canada