Document 100854

TRACTION PRODUCTS
Signature Series STAINLESS STEEL 60O CARBIDE STUD
TM
helmets &
es
accessori
clothing &
es
accessori
gloves &
es
accessori
THE 1.325" AND THE 1.450" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED. 1008 PACKS NOW CONSIST OF 10 PACKAGES
OF 96 AND 2 PACKAGES OF 24 WITH A SAVINGS OF UP TO 10% OVER THE OLD 1000 PACK. Woody's combines the advantages of
stainless steel with their performance proven designs at a competitive price! The high corrosion resistance allows you to use the Signature
Series™ in rigorous environments. The stainless steel combined with the 5/16” shank and the 15/16” head of the Signature Series™ is resistant
to impact even at extreme temperature variations ensuring you a reliable grip on the trail with the 60° carbide tip. Available in popular lengths of
1.000", 1.075", 1.175", 1.325" and 1.450" in packages of 24, 48, 96, 144 and 1,008 pieces.
boots &
es
accessori
luggage
es
accessori
body &
chassis
engine
&
electrical n
ignitio
controls
fuel &
intake
rewind
SIZE
24 PCS
rear
n
suspensio
96 PCS
144 PCS
1008 PCS
1.000" X 5/16”
SSP1005A
38.95 D
SSP1005
74.95 D
SSP1005B
145.95 D
SSP1005C
218.95 D
SSP1005M
1512.95 D
1.075" X 5/16”
SSP1075A
38.95 D
SSP1075
74.95 D
SSP1075B
145.95 D
SSP1075C
218.95 D
SSP1075M
1512.95 D
1.175" X 5/16”
SSP1175A
38.95 D
SSP1175
74.95 D
SSP1175B
145.95 D
SSP1175C
218.95 D
SSP1175M
1512.95 D
1.325" X 5/16”
SSP1325A*
45.95 D
SSP1325*
90.95 D
SSP1325B* 176.95 D
SSP1325C*
264.95 D
SSP1325M*
1827.95 D
1.450" X 5/16”
SSP1450A*
45.95 D
SSP1450*
90.95 D
SSP1450B* 176.95 D
SSP1450C*
264.95 D
SSP1450M*
1827.95 D
*Now being packaged with ALN2-4500 big nuts.
clutch
drive
48 PCS
600 CARBIDE GOLD DIGGER TRACTION MASTER STUD
THE 1.325” AND THE 1.450” PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED. 1008 PACKS NOW CONSIST OF 10 PACKAGES
OF 96 AND 2 PACKAGES OF 24 WITH A SAVINGS OF UP TO 10% OVER THE OLD 1000 PACK.The standard all other studs are compared
with. A sharp 60° carbide tip gives you superb traction and durability on hard-pack snow and ice. Most snowmobilers need added traction,
so be serious about it, buy Gold Digger® Traction Master® studs. The 5/16” has a 1” head and the 7mm has a 7/8” head. Both are throughhardened and heat treated. Available in 24, 96, 144 and 1008 piece packages.
front
n
suspensio
our most popular!
traction
products
mini sleds
chemicals
off-road
tools
er
snowblow s
part
go cart
trailer &
towing
SIZE
24 PCS
96 PCS
144 PCS
1.000" X 7MM
GDP61000
34.50
A
GDP61000B
129.50
A
GDP61000C
.8750" X 5/16”
GDP68755
50.95
D
GDP68755B
201.95
D
-----
149.50
1008 PCS
A
---------
.9200" X 5/16”
GDP69205
50.95
D
GDP69205B
201.95
D
GDP69205C
296.96
D
-----
1.000" X 5/16”
GDP61005
50.95
D
GDP61005B
201.95
D
GDP61005C
296.95
D
-----
1.075" X 5/16”
GDP61075
50.95
D
GDP61075B
201.95
D
GDP61075C
296.95
D
GDP61075M
1923.75
D
1.175" X 5/16”
GDP61175
50.95
D
GDP61175B
201.95
D
GDP61175C
296.95
D
GDP61175M
1923.75
D
1.325" X 5/16”
GDP61325*
57.95
D
GDP61325B*
228.95
D
GDP61325C*
337.95
D
GDP61325M*
2189.95
D
1.450" X 5/16”
GDP61450*
57.95
D
GDP61450B*
228.95
D
GDP61450C*
337.95
D
GDP61450M*
2189.95
D
*Now being packaged with ALN2-4500 big nuts.
1042 AUTOMATIC DISTRIBUTORS
www.autodist.com
CALL 1-207-942-6769
or toll free 1-800-341-1658
TRACTION PRODUCTS
GRAND MASTERTM TRAIL STUD
OEM TESTED AND APPROVED FOR SINGLE PLY TRACKS ONLY. Woody's Grand Master™ with a larger 1.200 head provides a larger anchor
to distribute pressure over a wider area on the single ply track.The Grand Master™ is available in stud lengths of 1.075 with standard nuts and
the 1.325 and 1.450 with ALN2-4500 big nuts. 1.575 has the tall big nuts ALN2-7000 in the packages. Packaged in quantities of 12, 48, 84 and
504. You must use this stud if you have a single ply track. This stud cannot be used in a traditional 2 ply track. Contact your dealer to determine if
you have a single ply track.*2.52 pitch tracks must use the square aluminum large Digger® support plates. TORQUE SPEC--Grand Master studs
must be torqued to 20 ft. lbs. Woody's also has an Indexing Tool available to align Grand Digger™ support plates.
helmets &
accessori
es
clothing &
accessori
es
gloves &
accessori
es
boots &
accessori
es
luggage
accessori
es
body &
chassis
engine
SIZE
12 PCS
48 PCS
84 PCS
electrical
&
ignition
504 PCS
1.075" X 5/16”
GMP1075-12
28.95
D
GMP1075-48
114.95
D
GMP1075-84
195.95
D
GMP1075-500
1070.95
D
1.325" X 5/16”
GMP1325-12*
32.95
D
GMP1325-48*
129.95
D
GMP1325-84*
219.95
D
GMP1325-500*
1203.95
D
1.450” X 5/16”
GMP1450-12*
32.95
D
GMP1450-48*
129.95
D
GMP1450-84*
219.95
D
GMP1450-500*
1203.95
D
1.575” X 5/16”
GMP1575-12**
32.95
D
GMP1575-48**
129.95
D
GMP1575-84**
219.95
D
GMP1575-500**
1203.95
D
* Now being packaged with ALN2-4500 big nuts.
** Now being packaged with ALN2-7000 big nuts.
controls
fuel &
intake
rewind
clutch
GRAND MASTER PROTM CROSS COUNTRY RACING STUD
drive
• Woody's Performance Profile Grand Master Pro™
for Cross Country Racers With Single Ply Tracks
• Machine 60° carbide tip and shank
• For Single Ply Track Only
• Four lengths: 1.075", 1.325", 1.450" & 1.575"
• Big Nuts included with 1.325", 1.450" & 1.575"
• 48 piece packages
rear
suspensio
n
front
suspensio
n
0
60 CARBIDE
TIP & SHANK
SIZE
4 LENGTHS
1.075”
1.325”
1.450”
1.575”
48 PCS
1.075” X 5/16”
GMPP1075-48
126.95
D
1.325” X 5/16”
GMPP1325-48
114.95
D
1.450” X 5/16”
GMPP1450-48
114.95
D
1.575” X 5/16”
GMPP1575-48
114.95
D
traction
products
mini sleds
LARGER 1.200” HEAD
FOR SINGLE PLY TRACK
chemicals
off-road
tools
snowblow
er
parts
Woody's Snowmobile Studs and Runners Increase the Performance and Safety Level of Your Snowmobile.
Taking off, steering, and stopping your snowmobile on hard pack or icy conditions is
unpredictable when you don't have the proper traction control. So, what’s going on?
• You don't have enough studs or carbide in the runner.
• You don't have a proper balance of studs and carbide for your snowmobile.
Woody's has been showing snowmobilers how to eliminate slipping & sliding for over 40 years. You want to enjoy
the outdoors and have fun driving your snowmobile. Woody's studs and carbide wear bars provide grip on the trail.
ALL ORDERS PLACED BY 6PM EST SHIP THE SAME DAY
2013 WINTER CATALOG
go cart
trailer &
towing
1043
TRACTION PRODUCTS
helmets &
es
accessori
clothing &
es
accessori
gloves &
es
accessori
boots &
es
accessori
SNOCROSS COMPETITION STUD
TRIGGER STUD
Woody’s Trigger stud is the necessary ammunition for lake racers The
Trigger has a long and narrow profile providing you with unmatchable
penetration. Its 60o carbide tip, 5/16” shank and 15/16” head make it
durable enough for any lake conditions you find. Offered in 1.450” and
1.630” lengths. The overall installed heights are 1.70” & 1.88”. The
race stud is available in packages of 48 pieces that include Woody’s
aluminum Big Nuts. When using studs of these lengths it is essential
to have proper clearance and tunnel protection.
Competition use only.
The snowmobile manufacturers brought your a
taller lug track and Woody’s is right there with
them with a stud to fit. A 60o carbide tip and 5/16”
shank from high strength alloy steel are durable
enough for any track conditions you find. This
stud is available in 24 and 96 piece packages with
lock nuts. The RACE1860 is the correct length
for 1.750” lug tracks that came stock on 2006 and
2007 Ski-Doo, Polaris, and Arctic Cat snowmobiles.
luggage
es
accessori
body &
chassis
RACE1860
engine
&
electrical n
ignitio
controls
fuel &
intake
RACE1860B
clutch
drive
rear
n
suspensio
front
n
suspensio
traction
products
mini sleds
1.860
1.860
5/16”
5/16”
63.95
24 pcs
96 pcs
252.95
.8750" X 5/16”
24 PCS
MEG8755
TRIG1450-S
134.95
D
1.630" X 5/16”
TRIG1630-S
134.95
D
96 PCS
43.95
D
MEG8755B
144 PCS
170.95
D
MEG8755C
1008 PCS
249.95
D
-----
1.000" X 5/16”
MEG1005
43.95
D
MEG1005B
170.95
D
MEG1005C
249.95
D
MEG1005M
1618.95
1.075" X 5/16”
MEG1075
43.95
D
MEG1075B
170.95
D
MEG1075C
249.95
D
MEG1075M
1618.95
D
1.175" X 5/16”
MEG1175
43.95
D
MEG1175B
170.95
D
MEG1175C
249.95
D
MEG1175M
1618.95
D
1.325" X 5/16”
MEG1325*
50.95
D
MEG1325B*
197.95
D
MEG1325C*
290.95
D
MEG1325M*
1884.95
D
1.450” X 5/16”
MEG1450*
50.95
D
MEG1450B*
197.95
D
MEG1450C*
290.95
D
MEG1450M*
1884.95
D
1.575" X 5/16”
MEG1575**
50.95
D
MEG1575B**
197.95
D
-----
MEG1575M**
1884.95
D
1.740" X 5/16”
MEG1740**
50.95
D
MEG1740B**
197.95
D
-----
MEG1740M**
1884.95
D
D
*Now being packaged with ALN2-4500 big nuts
**Now being packaged with ALN2-7000 big nuts
GOLD DIGGER TRACTION MASTER
MODIFIED CARBIDE
A Gold Digger Traction Master modified with a machine point sharpened
for excellent penetration. 45o carbide.
off-road
tools
er
snowblow s
part
trailer &
towing
D
1.450" X 5/16”
MEGA-BITE CARBIDE
chemicals
go cart
D
48 PCS
THE 1.325" AND THE 1.450" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED. THE 1.575" AND THE 1.740" PACKAGES HAVE
THE ALN2-7000 BIG NUTS INCLUDED. 1008 PACKS NOW CONSIST OF 10 PACKAGES OF 96 AND 2 PACKAGES OF 24 WITH A SAVINGS OF UP TO
10% OVER THE OLD 1000 PACK. The unique design of four flat sides on the penetration portion of the tough 5/16” shank provides additional contact
surface for added acceleration, deceleration and directional control under changing trail conditions. Professional snocross racers love the enhanced
controllability the 60° carbide tipped Mega-Bite® delivers. For trail riding, the Mega-Bite® is available in lengths of .875" through 1.450" in package
quantities of 24, 96, 144 and 1,008 pieces. For snocross racing, lengths of 1.575" and 1.740" are available in quantities of 24, 96 and 1,008.
SIZE
rewind
SIZE
STUD WITH ALN2-7000 BIG NUTS
48 PIECES - STUDS W/LOCK NUT
GDP117M
1.175
5/16”
119.95
D
GDP132M
1.325
5/16”
134.95
D
GDP145M
1.450
5/16”
134.95
D
1044 AUTOMATIC DISTRIBUTORS
"CHISEL TOOTH” PUSH-THRU STUD
THE 1.325" - 1.860” PACKAGES HAVE THE ALN2-4500 BIG NUTS
INCLUDED. The tough and dependable Chisel Tooth™ Traction
Master® is a workhorse. This stud penetrates like a pointed stud but
acts like a scooper with a flat surface for traction.This stud is offered
to the trail rider in lengths of 1.075" through 1.860” with a 5/16” shank
and a 1” head in packages of 48. In addition, for competition, Woody's
also offers a lighter 7mm with a 7/8" head in lengths of 1.000" through
1.200". All are available in packages of 48 pieces with lock nuts.
SIZE
48 PCS
CAP1000
96.95 D
1.000" X 7MM
CAP1060
96.95 D
1.060" X 7MM
CAP1200
96.95 D
1.200" X 7MM
CAP1075
96.95 D
1.075" X 5/16”
CAP1205
96.95 D
1.205" X 5/16”
CAP1325*
106.95 D
1.325" X 5/16”
CAP1630-S*
116.95 D
1.630” X 5/16”
CAP1860-S*
116.95 D
1.860” X 5/16”
*Now being packaged with ALN2-4500 big nuts
www.autodist.com
CALL 1-207-942-6769
or toll free 1-800-341-1658
TRACTION PRODUCTS
"CHISEL TOOTH” STUD
GOLD DIGGER CARBIDE
7mm. The finest carbide steel made with brazed construction
guaranteeing the carbide not to come out and allowing field sharpening,
domed washers provide a secure mount when used in rubber tracks, and
an 80 degree point maximizing penetration. Package of 24 complete
with T-nuts - bulk package with studs only. BACKING PLATES SOLD
SEPARATELY. .370 thread length. Carbide. 7mm thread for added
strength. Requires 1” 7mm T-Nut.
The most aggressive single point stud available for ice or dirt, giving
you the most positive traction available, once the ground surface is
penetrated. Can be used with either rubber or cleated tracks. Steel.
BACKING PLATES SOLD SEPARATELY.
1.000”
clothing &
accessori
es
gloves &
accessori
es
boots &
accessori
24 PIECES WITH T-NUTS
GDC1000
helmets &
accessori
es
es
19.50
B
luggage
48 PIECES WITH T-NUTS
GDC8750-48
.875”
27.50
accessori
B
es
body &
chassis
96 PIECES WITHOUT T-NUTS
GDC8750B
.875”
29.50
AD
GDC1000B
1.000”
39.50
B
48 PIECES - STUD ONLY
CLT1060
SIX POINT STAR BOLT
7MM
1.060”
74.95
engine
D
NYLON NUTS FOR
TRACTION MASTER STUDS
This is a most unique stud design, it is one of the few which provides
a beneficial combination of acceleration, braking and cornering. The
steel stud is made durable by through-hardened heat treating process.
Needed for installation is the Star Bolt and a square or round support
plate.
electrical
&
ignition
controls
fuel &
intake
rewind
clutch
drive
rear
suspensio
n
NYLON LOCK NUTS - 48 PCS
STAR BOLT - 1/4” - 20
ANB3900
24 PIECES
7.95
D
NYL5000
7MM
9.55
D
NYL5020
5/16”
9.55
D
front
suspensio
n
traction
products
ALUMINUM BIG NUTS
Stud lengths of 1.325" and 1.450" are packaged with ALN2-4500 Big Nuts. The 1.575" and 1.740" studs are packaged with the taller ALN2-7000.
The aluminum Big Nut with a nylon insert provides added support to longer length studs. It is available in two sizes. Use ALN2-7000 for 1.575"
studs and longer. Use ALN2-4500 for 1.450", 1.325" studs. Packaged in quantities of 24, 96 and 1000 pieces.
mini sleds
chemicals
off-road
tools
snowblow
er
parts
SIZE
24 PCS
96 PCS
1000 PCS
5/16” FOR 1.450" OR SHORTER
ALN2-4500
12.95
D
ALN2-4500B
45.95
D
ALN2-4500M
463.95
D
5/16” FOR 1.575" OR SHORTER
ALN2-7000
12.95
D
ALN2-7000B
45.95
D
ALN2-7000M
463.95
D
ALN5050B*
19.50
AD
-----
7MM
-----
go cart
trailer &
towing
* Aluminum nut with locking washer, no nylon insert
ALL ORDERS PLACED BY 6PM EST SHIP THE SAME DAY
2013 WINTER CATALOG
1045
TRACTION PRODUCTS
COLORED ALUMINUM SQUARE BACKING PLATES
helmets &
es
accessori
clothing &
es
accessori
gloves &
es
accessori
boots &
es
accessori
luggage
es
accessori
body &
chassis
engine
&
electrical n
ignitio
controls
COLOR
GREEN
PURPLE
RED
24 PCS , 7MM
ASW3730 7.50 B
ASW3735 7.50 B
ASW3740 7.50 B
COLOR
GREEN
RED
BLUE
YELLOW
ORANGE
BLACK
WHITE
24 PCS, 5/16”
ASW23780 24.95
ASW23790 24.95
ASW23795 24.95
ASW23800 24.95
ASW23805 24.95
ASW23810 24.95
ASW23815 24.95
clutch
front
n
suspensio
traction
products
mini sleds
chemicals
144 PCS, 7MM
ASW3730C
39.50
ASW3735C
39.50
ASW3740C
39.50
B
B
B
96 PCS, 5/16”
144 PCS, 5/16”
ASW23780B 89.95 D ASW23780C 134.95
ASW23790B 89.95 D ASW23790C 134.95
ASW23795B 89.95 D ASW23795C 134.95
ASW23800B 89.95 D ASW23800C 134.95
ASW23805B 89.95 D ASW23805C 134.95
ASW23810B 89.95 D ASW23810C 134.95
ASW23815B 89.95 D ASW23815C 134.95
D
D
D
D
D
D
D
1008 PCS, 5/16”
--------------------ASW23810M 650.00
ASW23815M 650.00
B
B
Green • Purple
• Red are
ANODIZED,
Blue • Yellow
• Orange •
White • Black
are PAINTED
The same quality material and strength of the square, aluminum support plate,
just a little easy to install-no indexing. The round aluminum support plates are
available in 5/16” x 1-3/8" thread in quantities of 24, 96, 144 and 1,008.
SIZE
24 PCS
96 PCS
144 PCS
1008 PCS
5/16” ALUM. AWA3775 16.95 D AWA3775B 60.95 D AWA3775C 89.95 D AWA3775M 567.95 D
--------7MM ALUM. AWA3700 14.95 D AWA3700B 52.95 D
TRIANGLE DIGGER SUPPORT PLATES
Give yourself an advantage with the Triangle Digger® aluminum support plate this season.
The Triangle Digger® delivers more power to the ground by increasing the track rotating
speed. The innovation is so distinctive a patent is pending. Tested by Team Woody's® and
has passed with increased podium finishes. Available for 5/16” studs in packages of 48.
SIZE
5/16”
drive
rear
n
suspensio
D
D
D
D
D
D
D
B
B
B
ROUND DIGGER ALUMINUM & STEEL SUPPORT PLATES
fuel &
intake
rewind
96 PCS, 7MM
ASW3730B 29.50
ASW3735B 29.50
ASW3740B 29.50
48 PCS
AWT3775 38.95
D
SQUARE DIGGER ALUMINUM SUPPORT PLATES
Aluminum support plates are fast becoming a Woody's best seller. The only difference between the square and
round is the square aluminum must be indexed to perpendicular with the edge of the track. The square aluminum
support plates are available in sizes of 7mm x 1-1/8" and 5/16” x 1-1/4" in quantities of 24, 96, 144 and 1,008.
SIZE
7MM
5/16”
24 PCS
96 PCS
144 PCS
1008 PCS
ASW3725 14.95 D ASW3725B 52.95 D
--------ASW23775 16.95 D ASW23775B 60.95 D ASW23775C 89.95 D ASW23775M 567.95 D
GRAND DIGGER ROUND AND SQUARE SINGLE
SUPPORT PLATES FOR SINGLE PLY TRACKS
The Grand Digger™ single support plates are available in round or square aluminum. They are packaged in
quantities of 12, 48, 84 and 504. You must use these support plates when installing Grand Master™ studs.
off-road
tools
STYLE
12 PCS
48 PCS
84 PCS
504 PCS
ROUND ARG3775-12 9.55 D ARG3775-48 34.95 D ARG3775-84 57.95 D ARG3775-500 318.95 D
SQUARE ASG3775-12 9.55 D ASG3775-48 34.95 D ASG3775-84 57.95 D ASG3775-500 318.95 D
er
snowblow s
part
DOUBLE GRANDTM DIGGER ALUMINUM
SUPPORT PLATES FOR SINGLE PLY TRACKS
go cart
The Double Grand™ Digger® support plate can only be used with the Grand Master
stud in stud patterns on our 286S, 300S and 252S templates for single ply tracks.
The addition of a dual configuration provides additional studding options in the
middle belt. The Double Grand Digger is available in 12, 48 and 250 piece packages.
Patterns for single ply tracks are available under Trail Templates. TORQUE SPECThe Grand Master stud must be torqued to 20 ft. lbs.
trailer &
towing
1046 AUTOMATIC DISTRIBUTORS
www.autodist.com
PART #
SIZE PKG QTY
ADG3775
5/16” 12 PCS
ADG3775-48 5/16” 48 PCS
ADG3775-250 5/16” 250 PCS
19.95
77.95
395.95
D
D
D
CALL 1-207-942-6769
or toll free 1-800-341-1658
TRACTION PRODUCTS
DOUBLE DIGGER TM ALUMINUM SUPPORT PLATES
Woody’s introduces a new Double DiggerTM Aluminum Support
Plate. These plates feature a dual stud mounting configuration that
will give more stud rigidity with less weight than steel plates or two
single aluminum plates. They are available for use with 5/16” Traction
Master Push-Thru Studs. The mounting holes are spaced the same
as Bender Stud Mate plates. The dome of the Double Digger has
been increased to take complete advantage of Woody’s patented
dished head design on their famous Traction Master series studs.
helmets &
accessori
es
clothing &
accessori
es
PART #
COLOR
HOLE
DIA.
ADD23775
NATURAL ALUMINUM
5/16”
12 PCS 15.95
D
ADD23775B
NATURAL ALUMINUM
5/16”
48 PCS 59.95
D
ADD23780B
GREEN
5/16”
48 PCS 83.95
D
ADD23790B
RED
5/16”
48 PCS 83.95
D
ADD23795B
BLUE
5/16”
48 PCS 83.95
D
ADD23800B
YELLOW
5/16”
48 PCS 83.95
D
ADD23805B
ORANGE
5/16”
48 PCS 83.95
D
ADD23810B
BLACK
5/16”
48 PCS 83.95
D
ADD23815B
WHITE
5/16”
48 PCS 83.95
D
PCS
gloves &
accessori
es
boots &
accessori
es
luggage
accessori
es
body &
chassis
engine
ANGLED DOUBLE DIGGER
ALUMINUM SUPPORT PLATES
ANGLED DIGGER ALUMINUM
SUPPORT PLATES
An awesome design taken one step further. The Double Digger® and
the 7° angle support plate designs have proven so effective separately,
imagine what they will do together. Weight reduction and acceleration
assistance rolled into one product.Read the instructions before installing.
Available in 5/16” and 7mm in quantities of 12 and 48.
This unique 7° angled design support plates holds the stud
off perpendicular from the track. Under load the stud moves to
perpendicular enhancing the consistency of acceleration and aiding
the stud to resist going past perpendicular in the other direction. A
unique concept and it works.Read the instructions before installing.
electrical
&
ignition
controls
fuel &
intake
rewind
clutch
drive
SIZE
12 PCS
48 PCS
SIZE
24 PCS
96 PCS
144 PCS
7MM
ADA3725
9.50
AD
ADA3725B
47.50
B
7MM ANG3725 18.95 D ANG3725B 70.95 D ANG3725C 104.95 D
5/16”
ADA3775
20.95
D
ADA3775B
78.95
D
5/16” ANG3775 19.95 D ANG3775B 76.95 D ANG3775C 112.95 D
SINGLE HOLE BENDER PLATES
Aluminum. New reinforced single hole bender
plate is angled at 45 degrees to lay against
angled face of rubber lug. Plate holds stud or
pick rigid and provides maximum traction. 7mm.
12 PCS
AWL2700 7.50 AD
48 PCS
Aluminum AWL2700B 36.50 B
ROUND DIGGER® ALUMINUM
& COLORED SUPPORT PLATE
• Your preference and imagination is all
that is needed to individualize your sled
with colored aluminum support plates.
• Customize with 5/16” x 1-3/8" threaded in
green, red, blue, yellow, black, or orange.
Stand out in the crowd!
Aluminum or Steel. Full 2" wide plate with a 45
degree angle lays flat against the rubber lugs on
the track. Holds stud rigid for maximum traction.
7mm. Aluminum plates are used for competition.
Steel plates are used for trail riding.
12 PIECES
----AWL3800 3.50 B
48 PIECES
Aluminum AWL3750B 29.50 AD
----Steel
n
front
suspensio
n
traction
products
mini sleds
chemicals
off-road
NOTE: ALUMINUM SUPPORT PLATES ARE LIGHTER
BUT WEAR FASTER THAN STEEL.
DUAL HOLE BENDER PLATES
rear
suspensio
tools
COLOR
PART #
BLACK
AWA3810
HOLE DIA.
5/16”
GREEN
AWA3780
5/16”
RED
AWA3790
YELLOW
AWA3800
PCS
48
48.95
D
48
48.95
D
5/16”
48
48.95
D
5/16”
48
48.95
D
ORANGE
AWA3805
5/16”
48
48.95
D
PINK
AWA3820
5/16”
48
48.95
D
ALL ORDERS PLACED BY 6PM EST SHIP THE SAME DAY
2013 WINTER CATALOG
snowblow
er
parts
go cart
trailer &
towing
1047
TRACTION PRODUCTS
helmets &
es
accessori
TRACK TENSION TOOL
WOODY'S
ACCESSORIES
Monitor your track, by determining your track deflection, wth this
new product offering from Woody’s. Add this tool to your regular
maintenance schedule for optimum perfomance. Follow the deflection
limit recommendations from the snowmobile or track manufacturer.
Never guess again!
clothing &
es
accessori
gloves &
es
accessori
boots &
es
accessori
luggage
PART # DESCRIPTION
AGW4000 1/2" X 6" WHEEL
30.95 D
BLACK WHEEL 1/4” X 4 1/2”
AGW4500 (FOR SHARPENING CARBIDE RUNNERS)
7.95 D
AGW4100 1" X 6" GREEN WHEEL
38.95 D
SHALLOW SOCKET TOOL
es
accessori
body &
chassis
Woody’s has developed a unique shallow socket for installing studs
that provides the torque to tighten without touching the surface of the
support plate. Works ideal with colored support plates. The 5/16” socket
is deep enough to install studs up to 1.575” length. Won’t scratch the
backing plates.
WD035
40.95
D
TRIANGLE SUPPORT PLATE
INDEXING TOOL
Align your Triangle Digger support plates by using this specialized
indexing Tool. To be used with a 3/8” ratchet. Can be used for both
5/16” and 7mm Triangle Digger support plates.
engine
&
electrical n
ignitio
PART #
SIZE
SCW4500
7MM
17.50
B
SCW4505
5/16”
21.95
D
WD8748
controls
fuel &
intake
rewind
9.50
B
UNIVERSAL TRACK HOLE DRILL
3/8” HEX BIT SOCKET
Perfect every time makes studding easy. The hollow drill for 7mm or
5/16” studs makes a precise opening for installing studs. No mistakes.
7mm T-nut studs and 5/16” push-through studs use 7mm drill.
Here is a 3/8” hex bit socket that you can use to hold the heads of
Woody’s and Roetin push through studs.
clutch
drive
TC7
rear
n
suspensio
11.95
D
W38876
SQUARE SUPPORT PLATE
INDEXING TOOL
front
n
suspensio
traction
products
7mm & 5/16”
A real time saver! Attach the tool directly to a standard 3/8” ratchet:
align the support plate flush with the track lugs and then tighten the nut.
Aligning the support plates can contribute to track longevity and your
safety. The indexing tool is available for 5/16 square support plates.
2.75
G
TRACK MARKER
Excellent tool for marking stud patterns on your track. Choose your
pattern, place the template over the track and mark the track in the
center of the appropriate holes with a white dot. You can review the
entire stud pattern on your track before drilling, eliminating stud
placement errors.
mini sleds
chemicals
PART #
SIZE
WD045
5/16”
19.95
D
WD040
off-road
SPI TRACK DRILL/CUTTER
tools
er
snowblow s
part
Perfect every time makes studding easy. The hollow drill for 7mm or
5/16” studs makes a precise opening
for installing studs. No mistakes. 7mm
T-nut studs and 5/16” push-through
studs use 7mm drill.
go cart
trailer &
towing
62-04003
5/16”
9.95
G
1048 AUTOMATIC DISTRIBUTORS
7.95
D
STUD HEX TOOL
A great tool for installing studs because they need to
be really tight and you are working in close quarters.
The aluminum handle will rest in the palm of your
hand so you can apply the pressure needed to keep
the stud from rotating as you torque the nut. Woody’s
® Stud Hex Tool will make installing studs easier
each step of the way. Each tool comes with two
hex bits. You can also buy a replacement package
of two hex bits for your Stud Hex Tool.
PART # DESCRIPTION
25.95 D
SHT-1 STUD HEX TOOL
SHI-2 STUD HEX TOOL REPL. INSERTS (PKG. OF 2) 5.95 D
www.autodist.com
CALL 1-207-942-6769
or toll free 1-800-341-1658
TRACTION PRODUCTS
GRIPPERTM FOR GROOMERS
helmets &
accessori
es
• Woody's Gripper Carbide Stud for Groomer Tracks and Tires
• The Gripper carbide stud will help you drive your goomer up and down icy
hills, around icy corners and stop slipping on uneven trail terrain
• Available in two sizes: 1¼" for Tractor Tires and 1½" for Groomer Tracks
• Solid brazed carbide tip
• 5/16” self- tapping high grade steel shank
• One person installation - two tools: ratchet & 7/16" socket
• Environmentally friendly - flat carbide tip: the weight of the groomer keeps
the stud in contact with the hard-packed snow or ice. The Gripper doesn't
dig into the trail, it Grips.
• Budget friendly - reduces wear and tear on the side wall of your tires.
Eliminates the need for heavy, hard-to-install, combersome chains.
• Driver friendly - Tight trails, ravines, icy hill and corners. Saves time
because you maintain your speed no matter what terrain you have to groom.
Hornets
24 STUDS W/LOCK NUTS
5/16” SHANK
HNT1000
1.000” 29.50 B
HNT1080
1.080” 29.50 B
gloves &
accessori
es
boots &
accessori
es
PART #
GRIP1250-100
GRIP1250-250
GRIP1500-100
GRIP1500-250
SIZE
5/16” x 1.250”
5/16” x 1.250”
5/16” x 1.500”
5/16” x 1.500”
QTY
100 pcs
250 pcs
100 pcs
250 pcs
181.95
453.95
181.95
453.95
D
D
D
D
accessori
es
engine
Narrow neck and rimless
point for superior penetration
electrical
&
ignition
700 point
Better wear then 600
Better penetration then 820
144 STUDS W/LOCK NUTS
5/16” SHANK
HNT1000G 1.000” 169.50 B
HNT1080G 1.080” 169.50 B
luggage
body &
chassis
Stinging traction
96 STUDS W/LOCK NUTS
5/16” SHANK
HNT1080B 1.080” 99.50 B
Guaranteed
not to break!
clothing &
accessori
es
controls
Heavy duty 5/16” shank for superior strength
No-Rust “Platinum-Tone” Finish
Large, thin head for superior rigidity and flush mounting
fuel &
intake
rewind
clutch
SKORPION STUD
drive
Skorpion studs are extreme traction. Patented multifaceted arrowhead
tip is sharp in all directions. These studs are so aggressive they should
not be used alone or in configuration with less than 144 studs. We
recommend 24 or 48 KNT studs on the inside with HNT Hornet studs
on the outside for optimum performance.
rear
suspensio
n
front
suspensio
n
traction
products
STUD AND LOCK NUT
KNT1180
5/16” x 1.180”
57.50
24 pcs
B
mini sleds
ALUMINUM WASHERS
DOUBLE POWER PLATES
•
•
•
•
Hybrid square/round shape provides extra stud support
Thicker aluminum for added strength
Extra rigidity works well with studs 1.340 and up
Double plates allow greater concentration of studs
•
•
•
•
•
5/16” Hole
Square
Our aluminum washers will reduce your traction weight
These aluminum washers are of the highest quality aluminum
The domed design adds strength and makes it possible to tighten
them up more than the flat style being sold by our competitors
• The top is flat for better contact with the stud
• “STAMPED”
chemicals
off-road
tools
snowblow
er
parts
go cart
trailer &
towing
PALD24
24 pcs
19.50
B
SAG24
Square 5/16”
ALL ORDERS PLACED BY 6PM EST SHIP THE SAME DAY
24 pcs
9.50
B
2013 WINTER CATALOG
1049
TRACTION PRODUCTS
helmets &
es
accessori
“ORIGINAL” GOLD SCREWS
HOLIDAY SUPER TRAX
ICE RACING STUDS
•
•
•
•
1/4” hex
clothing &
es
accessori
gloves &
es
accessori
HOLIDAY
boots &
es
accessori
PART #
HRS500M
HRS625M
HRS750L
HRS100L
HRS125L
HRS150L
luggage
es
accessori
body &
chassis
Traction on ice for motorcycles and ATVs
AMA / CMA approved
Made in USA
SOLD 250 PER PACKAGE
SIZE
1/2”
5/8”
3/4”
1”
1-1/4”
1-1/2”
PKG QTY
1000
1000
500
500
500
500
94.95
95.95
59.95
66.95
95.95
99.95
B
B
B
B
B
B
These ice screws
are the best
screws on the
market for ATV
and dirt bike tires.
ALUMINUM PLATE WITH 1/4" HOLE
PART #
1/2”
OGS12
22.85
B
3/4”
OGS34
26.75
B
1”
OGS100
27.55
B
HEAVY DUTY ULTRA LITES
•
•
•
•
• Pre-drilled aluminum plate
• 1/8" thick for maximum allowable stud
height on any track (3/4" x 1-1/4")
engine
SIZE
For 1.15 and longer studs
For the aggressive rider who uses longer studs
7mm
24 piece package
&
electrical n
ignitio
controls
fuel &
intake
rewind
clutch
KKS1
front •
n
suspensio •
•
traction •
products •
•
•
s
ed
mini sl
•
•
off-road
tools
er
snowblow s
part
1.00
670-40088
AD
ULTRA LITES
drive •
•
•
rear •
n
suspensio •
chemicals
20 plates
A unique one piece design
Self tapping
1/6 the weight of steel
1/3 the weight of aluminum
Made from a special nylon composite for
superior strength and less weight
Take off pounds with space age ultra lites
Fits all push-thru studs
2 sizes
7mm & 5/16”
Strong
Durable
COLOR SIZE
PART #
Colorful
PURPLE 7MM 670-20086 1.75
Long lasting
GREEN 7MM 670-20092 1.75
24 piece package
PLUM
1.75
AD
STUD BOY POWER
TOWER LOCK-NUTS
WITH NYLON INSERTS
•
•
•
•
•
AD
AD
5/16” - 24 threads
6061 - T6 aluminum for greater strength and support
.500” tall to be used with 1.080” and 1.187” studs
.750” tall to be used with 1.375” and longer studs
By increasing the shank size this product offers lightweight stud
strength Use the power tower lock nuts to keep these studs from
bending
.500” (1/2”)
SB2438P1
11.99
24
SB2438P3
47.99
96
B
B
.750” (3/4”)
SB2434P1
11.99
24
B
STUD BOY " SUPER LITE"
SNOWMOBILE STUD BACKER SERIES
• “STUD BOY”® announces the new “Super-Lite” backer plate line-up! The “SuperLite” backer is designed for the rider who is looking for light-weight stud support
and vibrant colors. These backers are made from new engineered polymers that
are lighter than aluminum, while maintaining excellent strength.
• The “Super-Lite +PLUS” Single Backer is a larger 1.450” square backer to be
used on all tracks (including Single Ply) with any of our 5/16” carbide studs.
COLOR
BLACK
BLACK
HOLE DIA.
5/16”
5/16”
PCS
24
96
PART #
2462-P11 14.99
2462-P31 59.99
B
B
GREEN
GREEN
5/16”
5/16”
24
96
2462-P13
2462-P33
14.99
59.99
B
B
ORANGE
ORANGE
5/16”
5/16”
24
96
2462-P15
2462-P35
14.99
59.99
B
B
RED
RED
5/16”
5/16”
24
96
2462-P16
2462-P36
14.99
59.99
B
B
YELLOW
YELLOW
5/16”
5/16”
24
96
2462-P14
2462-P34
14.99
59.99
B
B
go cart
trailer &
towing
1050 AUTOMATIC DISTRIBUTORS
www.autodist.com
CALL 1-207-942-6769
or toll free 1-800-341-1658
TRACTION PRODUCTS
STUD BOY “SUPER-LITE PRO”
SNOWMOBILE STUD BACKER SERIES
helmets &
accessori
es
“STUD BOY”® announces our new “SUPER-LITE” Pro Series backer plate line-up. The “SUPER-LITE” Pro Series backer is designed for the rider
who is looking for lightweight stud support that offers the lightest weight and best traction available and includes the support nut molded directly
into the backer.
clothing &
accessori
es
“SUPER-LITE” Pro Series backers are available in both single and double configurations in black and white.
gloves &
accessori
The double backers are available in .500” and .750” heights while the singles are available in the .750” height only. All Pro Series backers are
5/16”- 24 self tapping thread size.
boots &
accessori
Our “SUPER-LITE” Pro Series double backer is used for standard tracks using our regular “Power Point” type carbide studs while the Pro Series
singles can be used with either standard or +Plus style studs on both single and double ply tracks.
luggage
These new backers take traction and stud support to a new level. Tested and used by the best snocross and cross-country racers in the world
last season with outstanding results. If you are looking for lightweight super strong stud support you have found it with our “SUPER-LITE” Pro
Series backer plates.
accessori
es
SINGLE
.750
es
es
body &
chassis
engine
electrical
&
ignition
controls
fuel &
intake
PART #
COLOR
STUD BOY #
DESCRIPTION
PKG QTY
320032
49.99
B
BLACK
2511-P1-BLK
SUPERLITE DOUBLE .500" PRO SERIES
24
320034
99.99
B
BLACK
2511-P2-BLK
SUPERLITE DOUBLE .500" PRO SERIES
48
320033
49.99
B
WHITE
2511-P1-WHT
SUPERLITE DOUBLE .500" PRO SERIES
24
320035
99.99
B
WHITE
2511-P2-WHT
SUPERLITE DOUBLE .500" PRO SERIES
48
320036
49.99
B
BLACK
2512-P1-BLK
SUPERLITE DOUBLE .750" PRO SERIES
24
320038
99.99
B
BLACK
2512-P2-BLK
SUPERLITE DOUBLE .750" PRO SERIES
48
320037
49.99
B
WHITE
2512-P1-WHT
SUPERLITE DOUBLE .750" PRO SERIES
24
320039
99.99
B
WHITE
2512-P2-WHT
SUPERLITE DOUBLE .750" PRO SERIES
48
320041
26.99
B
WHITE
2513-P1-WHT
SUPERLITE SINGLE .750" PRO SERIES
24
320045
91.99
B
WHITE
2513-P8-WHT
SUPERLITE SINGLE .750" PRO SERIES
84
320043
104.99
B
WHITE
2513-P3-WHT
SUPERLITE SINGLE .750" PRO SERIES
96
320040
26.99
B
BLACK
2513-P1-BLK
SUPERLITE SINGLE .750" PRO SERIES
24
320044
91.99
B
BLACK
2513-P8-BLK
SUPERLITE SINGLE .750" PRO SERIES
84
320042
104.99
B
BLACK
2513-P3-BLK
SUPERLITE SINGLE .750" PRO SERIES
96
rewind
clutch
drive
rear
suspensio
n
front
suspensio
n
traction
products
mini sleds
chemicals
off-road
DOUBLE
.750
DOUBLE .500
tools
snowblow
er
parts
go cart
trailer &
towing
ALL ORDERS PLACED BY 6PM EST SHIP THE SAME DAY
2013 WINTER CATALOG
1051
TRACTION PRODUCTS
helmets &
es
accessori
clothing &
es
accessori
gloves &
es
accessori
boots &
es
accessori
luggage
es
accessori
body &
chassis
UNIVERSAL TUNNEL WEAR STRIPS
REFER TO PICTURES BELOW FOR
YOUR EXACT REPLACEMENT
PART #
OEM #
• All tunnel wear strips are sold each and designed to protect your heat
exchanger and tunnel when using studs
• To secure tunnel strips when necessary use our rivet #23100 (5/32 x 3/8)
COLOR DIMENSIONS
RIVET
REQ.
APPLICATION
QTY.
RIVETS
PER PAIR
ARCTIC CAT
KX04201
18.99 E
0106-223
Black 46 1/2” L X 1-1/8” W X 1/2” H Most Models 1970-92
23100
550-001
16.99 G
0106-223
White 52” L X 1 1/8” W X 3/4” H
Most Models 1970-92
23100
KX041993 17.99 L
----Black 48” L X 1” W X 3/4” H
Most Models 1994-00
23100
Note: Both have 11 holes pre-punched same as A/C OEM. They may be used as a universal and can be modified to the different length tunnels.
16
12
10
POLARIS
KX041993 17.99 L
5510130
Black 48” L x 1” W x 3/4” H
550-002
17.99 G
5510130
White 52” L X 1” H
555-002*
20.95 L
5510130
White 52”L X 1” H
Note: All above catalog numbers are drilled like Polaris OEM pattern.
550-117
12.99 G
Universal
Black 61” L X 1-1/8” W X 3/4” H
All High Performance Models 94-00
All Indy Models
All Indy Models
23100
23102
23102
12
10
10
All Indys
23102
10
48” L X 1/2” W X 1” H
44 1/4” L X 1/2” W X 3/4” H
50” L X 1/2” W X 3/4” H
50” L X 1/2” W X 3/4” H
50” L X 1/2” W X 1” H
50” L X 1/2” W X 1” H
57.50” L X 1” W X 1” H
Replace OEM style for all Models L/C 94-04
Fits Newer L/C Models 97-01
Fits Newer L/C Models
Fits Newer L/C Models
Replace OEM style for All Models
Replace OEM style for All Models
Replace New style Models
T-Rail
T-Rail
T-Rail
T-Rail
T-Rail
T-Rail
T-Rail
48” L X 3/4” H
48” L X 1” H
All High Performance Models 94-00
V-Max 500/700, XTC, V-Max 600/700 SX
23100
23102
SKI-DOO
engine
&
electrical n
ignitio
controls
fuel &
intake
rewind
KX041992 13.99 L
----Black
KX041997 14.99 L
517.2381
Black
550-003
15.99 G
517.2381
White
555-003*
12.95 L
517.2381
White
550-004
15.99 G
----White
555-004*
15.95 L
----White
555-005
19.95 L
----Black
Note: All above catalog numbers have “T” slot profile
YAMAHA
KX041993 17.99 L
SMA-8CV-92900
Black
550-006
15.99 G
SMA-8CV-92900
White
*These are Garland Manufacturing tunnel wear strips.
12
---
ALL TUNNEL WEAR STRIPS ARE MADE OF U.H.M.W. FOR A LONGER AND MORE DURABLE LIFE.
clutch
drive
rear
n
suspensio
front
n
suspensio
550-002
555-002
550-001
550-003
555-003
traction
products
550-004
555-004
550-006
KX04201
PHOTO NOT
AVAILABLE
mini sleds
chemicals
KX04199
off-road
tools
er
snowblow s
part
KX041997
KX041993
YAMAHA FRONT COOLER GUARD
•
•
•
•
OEM #5MA-8CR32-12-01
1997-2002 V-Max, Mountain Max, SX and 1998 SRX
Manufactured from Aluminum
Includes Hardware
555-005
YAMAHA REAR HEAT EXCHANGE
PROTECTOR KIT
Manufactured of 100% aluminum to keep weight to a minimum while
offering protection from a studded track. Fits all Exciters/SX, and 94-96
V-Max 500/600 (exc XT). 92-96 V-Max 4’s
go cart
trailer &
towing
MA1201
53.95 pr
G
1052 AUTOMATIC DISTRIBUTORS
MA6117
29.50 pr
www.autodist.com
B
CALL 1-207-942-6769
or toll free 1-800-341-1658
TRACTION PRODUCTS
UNIVERSAL TEMPLATE
helmets &
accessori
es
clothing &
accessori
es
• 3 TEMPLATES IN ONE!
• Combines our Trail, Double Digger and Performance Templates all into one
which has patterns from 48 to 192 studs with the exception of the 72 stud pattern
• 2 material standard template is heavy card stock with laminated finish. Deluxe
template is a clear Polycarbonate for many uses.
gloves &
accessori
es
WD064
WD066
STANDARD
POLYCARBONATE
boots &
13.95
D
accessori
es
27.95 D
luggage
ARCTIC CAT FIRECAT SABERCAT TEMPLATE
• FOR 2003 ARCTIC CAT FIRECAT AND SABERCAT SNOWMOBILES ONLY
• This template is made of laminated heavy card stock with patterns for 96 Single
Digger®, 96 Double Digger® or a 144 stud pattern combining Single and Double
Digger® support plates.
• Firecat - 96 Single Stud Pattern
• Firecat - 96 Double Stud Pattern ,The Firecat Template pattern for 96 studs uses
48 Double Digger® Support Plates.
• Firecat - 144 Single & Double Studs in Center This Firecat Template pattern for
144 studs uses 48 Single Digger® and 48 Double Digger® Support Plates.
accessori
es
body &
chassis
engine
WD541
13.95
electrical
&
ignition
D
LONG TRACK TEMPLATE
• A special Long Track Template to fit track sizes 15" x 136" and 15" x 144" with an added cutaway feature to make the slots expandable to accommodate 16" wide tracks. It has multiple
options for center belt studding with or without Double Digger® support plate.
• Long Track Template, 108 Double Studs for 136" Only This Long Track Template 108 stud
pattern for 136" track only uses 54 Double Digger} support plates.
• Long Track Template, 162 Single & Double Studs for 136" Only This Long Track Template 162
stud pattern for 136" tracks only uses 54 Single Digger® and 54 Double Digger®Support Plates.
• 198 Single Studs for 136" Only • 108 Studs for 136" and 114 for 144"
• 144 Studs for 136" and 152 for 144" • 144 Studs for 136" and 152 for 144"
• 162 Studs for 136" and 171 for 144"
controls
fuel &
intake
rewind
WD060
22.95
clutch
D
drive
SINGLE PLY TRACK TEMPLATE FOR 2.52 PITCH
• This template is for single ply tracks with a 2.52 pitch and should not be use on any other tracks. This template will fit 13.5",
14" and 15' x 128" tracks.
• The 2.52 pitch track should only be studded with square or double Grand Digger® support plates
• This template will accommodate a 102 single stud pattern. To install more studs than 102 contact Woody's for a stud pattern.
• 102 Stud Pattern for Single Ply 13.5", 14" & 15" x 128" tracks
• This stud pattern will fit either a 13.5", 14" or 15" x 128" single ply tracks. The 102 stud
pattern will require 102 Grand Master studs. Grand Master packages with SQUARE
SUPPORT PLATES ONLY can be used on this pitch track and this pattern.
• 153 Stud Pattern for Single Ply 13.5", 14" & 15" x 128" tracks- Single
• This stud pattern will fit either a 13.5", 14" or 15" x 128" single ply tracks. The 153 stud
pattern will require 153 Grand Master[TM] studs. Grand Master[TM] packages with
SQUARE SUPPORT PLATES ONLY can be used on this pitch track and this pattern. 102
Stud Pattern for Single Ply 128" tracks -2.52-Doubles and Singles
• The252S Template pattern for 102 studs for a 128" "track will use 51Double Grand™
Digger support plates. This 2.52 pitch track cannot use round Grand™ Digger® support
plates. • 153 Stud Pattern for Single Ply 13.5",14"&15" x 128" tracks-Double & Single
• This 153 stud pattern will require 51 single and 51 double Grand™ Master support plates.
The 2.52 pitch track cannot use round single Grand™ Master support plates.
252STEMP 16.95
rear
suspensio
n
front
suspensio
n
traction
products
mini sleds
chemicals
off-road
D
BEARCAT 154” SINGLE PLY TEMPLATE
•
•
•
•
snowblow
er
parts
Woody's Template for 154" BearCat Single Ply 2.86 Pitch Tracks
The BCTS-TEMP is for 154" - 2.86 pitch single ply tracks
This template has a pattern for 108 single studs
It should not be used on any other tracks and only with Grand
Series Traction Products
go cart
trailer &
towing
BCTS TEMP
ALL ORDERS PLACED BY 6PM EST SHIP THE SAME DAY
tools
22.95
D
2013 WINTER CATALOG
1053
TRACTION PRODUCTS
helmets &
es
accessori
clothing &
es
accessori
gloves &
es
accessori
boots &
es
accessori
luggage
es
accessori
body &
chassis
engine
BEARCAT TEMPLATE
• For Bearcats with a 2.52” pitch single-ply tracks - Must use Woody’s® Grand Master® studs and
Woody’s® Grand Digger® support plates. Using any other stud or support plate on the singleply track could cause damage to your track. If you don’t know the pitch of the track, contact your
snowmobile dealer.
• This template will accommodate 15” x 151” & 15”, 16”, 20” x 156” (381mm x 3835.4mm & 381, 406.4,
508mm x 3962.4mm) wide tracks. At the ends of each lug slot a portion of the template is outlined in
a black dotted line. To fit a 15” (381mm) wide track leave the dotted outlined area intact.
• To fit a 16” (406.4mm) wide track remove the gray shaded area. To fit a 20” (508mm) wide track
remove the black dotted outlined area. If the gray shaded area or black dotted outlined area has been
removed, the modified template should not be used on track widths less than the modified width.
BEAR-TEMP
22.95
D
13.5", 14" OR 15" X 128" TEMPLATE
• Woody's® new template is designed to provide studding patterns for 128"
snowmobile tracks in widths of 13.5", 14" and 15".
• Two patterns will accomodate 102 studs. One with 102 Single Digger® support
plates, the other using 51 Double Digger® support plates to develop a 102
stud pattern. A third pattern will allow you to install 153 studs using Single and
Double Digger® support plates. All patterns are for the center belt.
• The modification needed to accomodate either the 13.5”, 14” or a 15” wide
track will not change the scratch lines.
128-TEMP
22.95
D
286T-TEMP
22.95
D
300STEMP
22.95
D
286STEMP
22.95
D
&
electrical n
ignitio
controls
TWO PLY TEMPLATE FOR 2.86 PITCH
84 DOUBLE FOR 120" AND 96 DOUBLE FOR 137" TRACK IN CENTER
fuel & • This template has patterns for standard two ply tracks with a 2.86 pitch. This template will
accommodate 14", 15" and 16" wide tracks in lengths of 120" or 137". Patterns for the 120"
intake
track are 84,105, 126 and 168.
• The patterns for the 137" long track are 96, 120,144 and 192. Do not use this template on
rewind
Single Ply tracks with a 2.86 pitch. Use the 286S-Temp on single ply tracks with a 2.86 pitch.
clutch
drive
rear
n
suspensio
front
n
suspensio
traction
products
SINGLE PLY TRACK TEMPLATE FOR 3.0 PITCH
• This template has patterns for single ply tracks with a 3.0 pitch and should not be used on any
other tracks. This template will fit 15" x 141" tracks with patterns for 94 and 141 Grand Master
™ studs and the larger square or round support plate that fits the 1.200" Grand Master™ head.
• This stud pattern will fit a 15" x 141" single ply track. The 94 stud pattern will require 94 Grand
Master™ studs.
• This stud pattern will fit a 15" x 141" single ply track. The 141 stud pattern will require 141
Grand Master™ studs.
mini sleds
chemicals
off-road
tools
er
snowblow s
part
go cart
trailer &
towing
SINGLE PLY TRACK TEMPLATE FOR 2.86 PITCH
• This template has patterns for single ply tracks with a 2.86 pitch and should not be used
on any other tracks. This template will fit 15" x 120 and 15" x 137" tracks. Patterns for the
15" x 120" tracks are for 84 single Grand Master™ studs and a 126 Grand Master ™ stud
pattern for singles and double Grand Digger®support plates that fits the 1.200" Grand
Master™ head. The 15" x 137" tracks has patterns for 96 single Grand Master studs and
144 Grand Master™ studs with a single and double pattern. The 2.86 pitch track can use
the round and square single Grand Digger support plate. A pitch is the space between
two lugs
• 84 Stud Pattern for Single Ply 15" x 120" -2.86 This stud pattern will fit 15" x 120" single
ply tracks. The 84 stud pattern will require 84 Grand Master™ studs.
• 126 Stud Pattern for Single Ply 15" x 120" -2.86-Doubles and Singles This stud pattern will
fit a 15" x 120" single ply tracks. The 126 stud pattern will require 42 Single and 42 Double
Grand Master™ support plates.
• 96 Stud Pattern for Single Ply 15" x 137" -2.86 This stud pattern will fit 15" x 137" single
ply tracks. The 96 stud pattern will require 96 Grand Master ™ studs.
• 144 Stud Pattern for Single Ply 15" x 137" -2.86 This stud pattern will fit a 15" x 137" single
ply track. The 144 stud pattern will require 48 single and 48 double Grand Master™ studs.
1054 AUTOMATIC DISTRIBUTORS
www.autodist.com
CALL 1-207-942-6769
or toll free 1-800-341-1658