1. No category

Optional arbor for
RB65E. #3 Morse
taper shank, 1-1/4”
hole diameter.
For use with XL100,
XL200, CT150, CT200,
CT150STK, CT200STK
for 2-5/16” diameter
and larger, which have
a 1-1/4” shank.
Included with the
RB65E. #3 Morse
taper shank,
3/4” hole diameter.
For use with all 3/4”
shank annular cutters
up to 2-1/4” diameter.
Optional arbor for
RB65E. #3 Morse
taper shank, 3/4” hole
diameter. For use with
XL300, XL400, CT300,
CT400, CT150STK,
CT200STK up to 2-1/4”
diameter which have
a 3/4” shank.
Optional arbor for RB65E.
#3 Morse taper shank,
1-1/4” hole diameter.
For use with XL100,
XL200, XL300, XL400,
CT150, CT200, CT300,
CT400, CT150STK,
CT200STK from 2-5/16
diameter and larger,
which have a 1-1/4”
shank.
RB632 - Arbor
1/2” drill chuck for AC35. 1/2-20
internal thread chuck. Requires
AC35-461220 for mounting to
AC35 motor.
RB6534 - Drill Chuck
Optional 3/4” drill
chuck for RB65E.
#3 morse taper
shank arbor to
Jacobs mounted
drill chuck.
RB6512 - Drill Chuck
Optional 1/2” Drill
chuck for RB65E.
#3 morse taper
shank arbor to
Jacobs taper
mounted drill chuck.
1/2” drill chuck and
adaptor for AC50
magnetic drill press.
3/4” weldon shank
threaded to 1/2” drill
chuck.
QX1234 - Drill Chuck/Adaptor
AC50
Optional tapping attachment
for RB32-VSR. Threads to
RB32-VSR with 1/2-20 thread.
Used with #2 collet adaptors.
RB-925 to RB-944 collet
adaptors are used with RB32Tapper for holding taps from
0 through 3/4” diameter.
RB32-Tapper - Tapping Attachment
RB32-VSR
For more information please contact our Customer Service Department at 516-536-8200 or visit our website at www.championcuttingtool.com
RB635 - Arbor
RB634 - Arbor
RB633 - Arbor
Optional traditional set
screw arbor for AC35.
3/4” arbor hole diameter.
For use with 1” and 2”
depth of cut CT150, CT200,
XL100, XL200, CT150STK,
CT200STK cutters.
Standard “quick-change”
arbor for AC35. 3/4” arbor
hole diameter. For use
with 1” and 2” depth
of cut CT150, CT200,
XL100, XL200, CT150STK,
CT200STK cutters
RB65E
AC3502-M - Arbor
AC3502LQ - Arbor
AC35-1220 - Drill chuck
AC35-461220 - Chuck Arbor
Standard arbor for RB32.
1/2-20 threaded hole
threads on to RB32, 3/4”
arbor hole diameter.
Max depth is 1-3/16”.
For use with XL100,
CT150, CT150STK cutters.
AC35
RB3212 - Drill Chuck
1/2” drill chuck for
RB32. 1/2-20 internal
thread drill chuck.
RB335 - Arbor
Optional arbor for RB32.
1/2-20 threaded hole
threads on to RB32, 3/4”
arbor hole diameter. For
use with 1” and 2” depth
of cut - XL100, XL200,
CT150, CT200, CT150STK,
CT200STK cutters.
RB334 - Arbor
RB32
Magnetic Drill Arbors, Drill Chucks & Tapping Attachment