iTN165-4GE4E1
-
Highlights
-
-
-
Specifications
Flexible service interworking.
Taking advantage of
comprehensive data
encapsulation ability, iTN1654GE4E1 gives more widely
used scenario in different PSN
network (PTN/ETH/IP/MPLS)
Multiple clock modes meet
variable customer’s
provisionings
Comprehensive hierarchical
OAM solutions based on
802.3ah, 802.1ag for OPEX
reduction
Zero-touch Auto Provisioning
for uplink to PTN/IP RAN
makes a great simplification
Line: 2 x GE SFP
(100BASE-FX/1000BASE-FX SFP)
Client:
4 x 10/100/1000BASE-TX electrical
port
1 x 2Mbit/2MHz clock interface (RJ45)
4 x E1 interfaces (RJ45)
SNMP interface: 1 x RJ45
Console interface: 1 x USB
Dimensions: 320(L), 200(W), 43.6(H) mm
Operating temperature: 0 to 65⁰C
Storage temperature: 0 to 70⁰C
Humidity: 10 to 90%, non-condensing
Lightning proof: 6kV/AC, 6kV/DC
PSU: 100/240V AC, -36 to -57V DC
Max power consumption: 25 W
-
iTN167-4GE4E1
Flexible service interworking.
Taking advantage of
comprehensive data
encapsulation ability. iTN1674GC4E1 gives more widely used
scenario in different PSN network
(PTN/ETH/IP/MPLS)
Multiple clock modes meet
variable customer’s provisionings
Comprehensive hierarchical OAM
solutions based on 802.3ah,
802.1ag for OPEX reduction
Zero-touch Auto Provisioning for
uplink to PTN makes a great
simplification
Stable and reliable network
assurance with G.8031, G.8032
and MPLS_TP protection
Line: 2 x GE SFP
Client:
4 x GE combo
1 x 2Mbit/2MHz clock interface (RJ45)
4 x E1 interfaces (RJ45/DB37)
SNMP interface: 1 x RJ45
Console interface: 1 x USB
Dimensions: 220(W)mm x 180(D)mm x
43.6(H)mm
Operation temperature: -10° to 50° C
Storage temp: -25° to 70àC
Humidity: 10 to 90% non-condensing
PSU: 100/240V AC, -36 to -72V DC
Max power consumption: <25W
Weight: <2.5 Kg
Access Capacity
Synchronization
-
Ethernet
-
-
IP services
Traffic Management
-
-
Security
-
Reliability
-
-
iTN165-4GE4E1
MTU: 13k byte
Support clock source from uplink,
BITS and E1
Support SSM message
1 x RJ45 interface supporting input
& output
BITS: 2.048Mbps and 2.048MHz
Up to 32k MAC (black list
supported)
Support 4,094VLANs (C-tag),
stacked VLANs (QinQ, S-tag based
on C-tag/C-tag+cos), N:1 and 1:1
inner/outer VLAN translation
Loopback per port/MAC/VLAN/IP
Interface protection, port
monitoring
IGMP Snooping(v1,v2,v3)
ARP
DHCP client, option60
IPv4, IPv6 (Ping, traceroute)
Static routing (IPv4,IPv6)
Service classification per
port/VLAN/CoS(DSCP)/ACL
Support SP, WRR,DRR,SP+WRR and
SP+DRR scheduling modes, and up
to 8 queues per port MEFcompliant 3-color policing with
color-aware and color-blind mode
Bandwidth throttling per
port/VLAN/PW/Tunnel (PW &
Tunnel only for Uplink)
Secure MAC address
ACL based on VLAN, CoS, MAC,
EtherType, IPv4, IPv6, or userdefine combinations
RADIUS, TACACS+
IEEE 802.1x port authentication
Storm control (broadcast, multicast,
DLF)
Link aggregation group (LAG) – up
to 3 groups with 4 ports in each
group
Interface backup
ITU-T G.8031 Ethernet link
protection switching (ELPS) and
G.8032 Ethernet ring protection
switching (ERPS) with the automatic
protection switchover time less
than 50ms
-
-
-
-
-
-
-
-
iTN167-4GE4E1
MTU: 13000 byte
Support clock source from
uplink, BITS and E1
1 x RJ45 interface supporting
input & output
BITS: 2Mbps and 2MHz
Manually or automatically
selecting the clock source
Support SyncE and SSM
Up to 8k MAC
Support 4,094VLANs (C-tag),
stacked VLAN, 1:1 inner/outer
VLAN translation
Loopback per
port7MAC/VLAN/IP
Interface protection, port
monitoring
ARP
DHCP client
IPv4 (Ping, trace route)
Static routing (IPv4)
Service classification per
port/VLAN/CoS(DSCP)/ACL
Support SP, WRR, DRR,
SP+WRR and SP+DRR
scheduling modes, and up to 8
queues per port
Bandwidth throttling per
port/VLAM/PW/Tunnel
ACL based on VLAN, CoS, MAC,
EtherType, IPv4, IPv6, or useddefine combinations
RADIUS, TACACS+
Storm control (broadcast,
multicast, DLF)
Link aggregation group (LAG) –
up to 3 groups with 4 ports in
each groups
Standard LACP (static only)
Interface backup
ITU-T G.8031 Ethernet link
protection switching (ELPS)
and G.8032 Ethernet ring
protection switching (ERPS)
-
Port based Ethernet local loop
detection
Fault propagation
-
MPLS
-
-
MPLS-TP
CES
Interfaccia TDM:
- Framing: Unframed/Framed with or
without CRC
- TX clock mode configurable
- Internal/external/bidirectional
loopback;
- E1 alarm statistics
PWE3:
-
Ethernet OAM
Static MPLS following MPLS-TP
Multiple LSP per PW
MPLS pipe/uniform model
Static/E-Line(vpws)/E-Lan(vpls)/ETree L2 VPN
PWE3 encapsulating
Ethernet/SAToP TDM/CESoP TDM
Service
LSP OAM including CV(Connectivity
Verification), LB, AIS, RDI, LCK, Test,
packet loss, jitter and delay
PW OAM including CC and LB
MPLS-TP 1:1 protection
PW 1:1 linear protection
//
-
-
Up to 512 PWs;
PW payload type: SAToP, CESoPSN
PSN type: UDP/IP, MPLS, MEF
Configurable jitter buffer
RTP configuration
IEEE 802.3ah EFM-OAM link
management
IEEE 802.1ag connectivity fault
management (CFM) with 3.3ms
CCM resolution
ITU-T Y.1731
with the automatic protection
switchover time less than
50ms
Port based Ethernet local loop
detection
Fault propagation
//
-
Multiple LSP per PW
MPLS pipe/ uniform model
Static /E-Lan (vpls) L2VPN
LSP OAM including CV
(connectivity Verification), LB,
LT, AIS, RDI, LM
- Packet loss, jitter and delay
- PW OAM including CC and LB
- MPLS-TP 1:1 protection
- PW 1:1 linear protection
Interfaccia TDM:
- Framing: unframed/framed
with or without CRC
- TX clock mode configurable
Internal/external/bidirectional
loopback
- E1 alarm statics
PWE3:
- Up to 64 PWs
- PW payload type: SAToP,
CESoPSN
- PSN type: UDP/IP, MPLS, MEF8
- Configurable jitter buffer
- RTP configuration
EFM
- IEEE 802.3ah OAM including
discovery, link performance,
remote loopback, fault
detenction & performance
status
-
RFC2544
L2 & L3 SLA
E-LMI (MEF 16)
Dying gasp message in case of
power failure
CFM
-
System Management
-
Standard Compliance
Ordering
Information
Remote management via SNMP
v1/v2/v3, Telnet and SSH v1/v2
Local management via console
interface
MEF 36 compliant MIB
KeepAlive, RMON, LLDP, Syslog
Port/VLAN/Cos-based statistics
Alarm management
SFP digital diagnostic management
(DDM)
Voltage and temperature
monitoring
-
ITU-T G.703, ITU-T G.704, ITU-T
G.706, ITU-T G.732, ITU-T G.823
- IEEE802.1Q (VLAN), 802.1ad (QinQ),
802.1ag (CFM), 802.1p (QoS/CoS
Priority), 802.1x (Security), 802.3ad
(LAG), 802.3ah (EFM)
- G.8031 (ELPS), G.8032 (ERPS),
Y.1731
- IETF RFC 2865 (RADIUS), 2819
(RMON)
- Safety CE certified, UL RoHS and
NEBS3 compliant
- EMI Class A
iTN165-4GE4E1-BL-AC
iTN165-4GE4E1-BL-DC
iTN165-4GE4E1S-BL-AC
iTN165-4GE4E1S-BL-DC
Supplied Accessories (included):
AC power cord or DC connection kit
Console cord
Manual CD
-
-
-
-
OAM active/passive mode
OAM MIB variable get function
OAM event function
IEEE 802.1ag/Y.1731 protocol:
up to 128 MEP, 120 MA
CC, LB, LT, PM
L2 &L3 SLA including jitter,
delay and packet loss
Dying gasp massage in case of
power failure
Remote management via
SNMP v1/v2/v3, Telnet and
SSH v1/v2
Local management via console
interface
KeepAlive, RMON, LLDP, Syslog
Port/VLAN/CoS-based
statistics
Alarm management
SFP digital diagnostic
management (DDM)
Voltage and temperature
monitoring
ITU-T G.703, ITU-T G.704, ITUT G.706, ITU-T G.732, ITU-T
G.823
IEEE802.1p (Qos/CoS Priority),
802.1x (Security), 802.3ad
(LAG), 802.3ah(EFM)
G.8031 (ELPS), G.8032 (ERPS),
Y.1731
IETF RFC 2865 (RADIUS), 2819
(RMON)
MEF CE2.0 certified
iTN167-4GE4E1-AC/D
iTN167-4GE4E1-BL-AC/D
iTN167-4GE4E1-DC/D
iTN167-4GE4E1-BL-DC/D
iTN167-4GE4E1-AC_DC
iTN167-4GE4E1-BL-AC_DC
iTN167-4GE4E1-S-AC/D
iTN167-4GE4E1-BL-S-AC/D
iTN167-4GE4E1-S-DC/D
iTN167-4GE4E1-BL-S-DC/D
iTN167-4GE4E1-S-AC_DC
iTN167-4GE4E1-BL-S-AC_DC
SUMMARY TABLE