C-Bus TEchnology | OUTPUT Units
High Power Architectural Series Dimmer Range
Learn Enabled
The C-Bus high power, multi channel dimmers are designed for architectural lighting applications. The dimmers feature
Advanced Phase Control technology, a patented process that achieves high switching efficiency, low heat dissipation
and low losses which means the dimmers are smaller, occupy less volume for the same power output.
The dimmers feature a Digital Signal Processor (DSP) for very fast processing and unsurpassed performance. The DSP is
programmed to achieve high performance including frequency tracking, over voltage limiting, programmable dimming
curves for specific and specialist lamp types. The dimmers also feature digital triac firing, for precise control and 13-bit
fade resolution.
The dimmers feature DMX512 and C-Bu s interfaces and control of the dimmers may be from either a C-Bus or DMX station.
T E C HN I C A L I N F O R M A T I ON
Catalogue Number
L5112D10B2L5112D12B2L5112D16B2
Line Supply Voltage
180-265VAC
Supply Frequency
40-80Hz
Operation
Single or three phase 4-Wire with neutral
Fade Resolution
13 bit
C-Bus Supply Voltage
15-36VDC @ 22mA
Load Rating per Channel
10A
12A 16A
Minimum Load
0W per channel
6kVA
MCCB Fault Current
Temperature Control
Temperature controlled fans
Coil Rise Time 200µ/sec
Compatible Loads
Incandescent, cold cathode (non-capacitive input) and low voltage lighting.
Suitable for use with leading edge compatible electronic transformers.
Switch Technology Advanced phase control (patented)
Switching Efficiency
99.8%
Maximum Number of Units on
30
443
a Single C-Bus Network
Control Interfaces DMX512 and C-Bus
Status Indicators Channel Status (12), DMX, Line Voltage, Unit and C-Bus
Warm Up Time 5 seconds
Software selectable
Network Clock Network Burden Software selectable
C-Bus Termination 2 x RJ45 sockets
Load Termination 2 x 2.5mm2 or 1 x 4mm2
Weight 18kgs
Operating Temperature Range
0˚C to 40˚C
Operating Humidity Range
0 - 95% RH, non-condensing
WARNING
DANGER HIGH VOLTAGE INSIDE
1
2
3
4
5
6
7
8
L5112D10B2
PRODUC T FEATURES
• Features 12 channels of 10A, 12A or 16A.
• Programmable via the learn mode feature or using the C-Bus
Toolkit Software.
• Programmed variables are stored in non-volatile memory
and are retained in case of loss of mains or C-Bus power.
• Local and remote on/off control independent of C-Bus
communications.
• Programmable power up state following power cycling.
• Logic states (max/min) programmable using the C-Bus
Toolkit Software.
• Employs frequency-tracking algorithms for smooth flicker
free operation.
• Soft start on power up, for increased lamp life.
• Available with 1P or 1P + 1N breaker version for European
markets.
• RCM (Australia/New Zealand), CE (European Community)
compliant.
531
9
10
11
12
Professional Architectural Dimmers
Advanced Phase Control
Made in Australia
443
WARNING
DANGER HIGH VOLTAGE INSIDE
150
1
2
3
4
5
6
7
531
8
9
10
11
12
Professional Architectural Dimmers
Advanced Phase Control
Made in Australia
Catalogue Number
L5112D10B2
L5112D12B2 L5112D16B2
L5112D20B2
L5112D10B2S
L5112D10B2 illustrated
Description
12 Channel
Dimmer, 220/240VAC,10A per Channel, MCCB Protection 40-80Hz, APC Technology
150
12 Channel Dimmer, 220/240VAC,12A per Channel, MCCB Protection 40-80Hz, APC Technology
12 Channel Dimmer, 220/240VAC,16A per Channel, MCCB Protection 40-80Hz, APC Technology
12 Channel Dimmer, 220/240VAC, 20A per Channel, MCCB Protection 40-80Hz, APC Technology
12 Channel Dimmer, 250VAC,10A per Channel, MCCB Protection 40-80Hz, APC Technology
Catalogue Number Description
Accessories
5150SMBShallow Mounting Bracket
5150DMB
Deep Mounting Bracket
5150DMX
DMX Connector Kit
61