Download Report

SAMTEC CABLE BANDWIDTH PERFORMANCE SELECTOR
Single-Ended
High Speed Coax
SERIES
6QCD
EQCD
EQRD
EQRF
ERCD
FCF8
FFTP
HLCD
PITCH
0,635 mm
0,80 mm
0,80 mm
0,80 mm
0,80 mm
0,80 mm
0,50 mm
0,50 mm
CABLE
7dB
LENGTH INSERTION
LOSS POINT
6”
3.34 GHz
9”
3.52 GHz
SERIES
HQCD
PITCH
0,50 mm
CABLE 7dB
LENGTH INSERTION
LOSS POINT
6”
6.08 GHz
9”
6.41 GHz
12”
3.15 GHz
12”
5.25 GHz
19.68”
2.34 GHz
19.68”
4.47 GHz
29.53”
1.44 GHz
29.53”
2.52 GHz
39.37”
1.16 GHz
39.38”
1.71 GHz
6”
5.61 GHz
6”
3.51 GHz
9”
5.31 GHz
9”
3.63 GHz
MICD
0,635 mm
12”
5.01 GHz
12”
3.45 GHz
19.68”
4.11 GHz
19.68”
4.47 GHz
29.53”
3.06 GHz
29.53”
2.52 GHz
39.37”
1.92 GHz
39.37”
2.08 GHz
6”
4.32 GHz
6”
7.92 GHz
SEAC
1,27 mm
9”
3.87 GHz
9”
7.94 GHz
12”
3.72 GHz
12”
7.99 GHz
19.68”
3.03 GHz
19.68”
6.00 GHz
29.53”
2.67 GHz
29.53”
4.29 GHz
39.37”
2.04 GHz
39.37”
3.29 GHz
152 mm
4.62 GHz
6”
7.23 GHz
305 mm
4.59 GHz
9”
7.20 GHz
500 mm
4.53 GHz
12”
6.46 GHz
1000 mm
4.47 GHz
19.68”
5.79 GHz
6”
6.37 GHz
29.53”
3.26 GHz
9”
6.32 GHz
39.37”
2.12 GHz
9.84”
6.00 GHz
12”
5.43 GHz
19.68”
4.29 GHz
29.53”
2.19 GHz
39.37”
2.50 GHz
6”
7.21 GHz
9”
6.65 GHz
12”
6.37 GHz
19.68”
4.73 GHz
29.53”
2.30 GHz
39.37”
1.46 GHz
3.85”
2.00 GHz
8.84”
1.94 GHz
9.80”
8.00 GHz
SQCD
0,635 mm
The information contained in this chart does not represent the potential maximum performance of the interconnect system. If your application appears to exceed the cable
assembly’s rating from the chart, the cable assembly solution may still work. Please contact our Signal Integrity Group at [email protected] for additional support.
The data reflects the point where an insertion loss of 7dB occurs within the cable assembly. The data is based from a test circuit with a characteristic impedance of 50 ohm
single-ended and a wiring pattern of Q-S-Q (where Q = quiet line terminated to Zc; S - active single line) within the pin field of the connector. Resonances in the loss data which
may be caused by impedance mismatches at the ends of the cable assemblies are not included in the loss calculations.
For more information on any of the products included in this chart, click on the series name in the Key to get complete testing information, visit our website at www.samtec.com,
or contact our High Speed Cable Group at [email protected].
+ DOES NOT INCLUDE TEST BOARD EFFECTS
1
Revised: April 09, 2015
©Samtec, Inc.
SAMTEC CABLE BANDWIDTH PERFORMANCE SELECTOR
Differential Pair
High Speed Twinax
CABLE 7dB
SERIES
PITCH
LENGTH INSERTION
LOSS POINT
6QDP
6QDPS
0,635 mm
0,635 mm
DCC
ECDP
0,80 mm
6”
9.24 GHz
12”
5.40 GHz
9”
8.29 GHz
19.68”
5.58 GHz
10”
6.00 GHz
29.53”
5.01 GHz
12”
6.16 GHz
39.37”
5.10 GHz
19.68”
5.27 GHz
6”
7.56 GHz
7.38 GHz
5.32 GHz
39.37”
5.50 GHz
12”
6.00 GHz
6”
9.29 GHz
19.68”
6.00 GHz
9”
6.24 GHz
29.53”
6.00 GHz
10”
8.50 GHz
39.37”
5.13 GHz
6”
9.07 GHz
9”
9.20 GHz
19.68”
6.06 GHz
29.53”
6.01 GHz
12”
8.79 GHz
39.37”
6.00 GHz
19.68”
9.20 GHz
9”
15.00 GHz
29.53”
7.06 GHz
40”
9.00 GHz
9.843”
10.00 GHz
39.37”
9.00 GHz
EEDP
0,80 mm
6”
11.40 GHz
9”
10.60 GHz
12”
9.68 GHz
19.68”
7.25 GHz
29.53”
4.75 GHz
39.37”
3.42 GHz
6”
10.05 GHz
9”
9.95 GHz
12”
9.96 GHz
19.68”
9.95 GHz
29.53”
5.90 GHz
39.37”
4.92 GHz
6”
4.62 GHz
9”
4.62 GHz
EQRP
0,80 mm
0,50 mm
6.15 GHz
5.50 GHz
0,80 mm
HQDP
12”
500 mm
EQRF
0,80 mm
29.53”
0,80 mm
0,80 mm
ERDP
9”
ECUE
EQDP
CABLE 7dB
SERIES
PITCH
LENGTH INSERTION
LOSS POINT
12”
4.53 GHz
19.68”
4.53 GHz
39.37”
4.47 GHz
6”
5.82 GHz
9”
5.79 GHz
PCIEC
PCRF
39.37”
6.30 GHz
95 mm
5.18 GHz
152 mm
4.70 GHz
229 mm
4.78 GHz
250 mm
10.00 GHz
305 mm
4.83 GHZ
500 mm
4.64 GHz
750 mm
4.54 GHz
1000 mm
5.50 GHz
305 mm
3.69 GHz
457 mm
3.87 GHz
500 mm
3.53 GHz
750 mm
3.88 GHz
1000 mm
3.59 GHz
The information contained in this chart does not represent the potential maximum performance of the interconnect system. If your application appears to exceed the cable
assembly’s rating from the chart, the cable assembly solution may still work. Please contact our Signal Integrity Group at [email protected] for additional support.
The data reflects the point where an insertion loss of 7dB occurs within the cable assembly. The data is based from a test circuit with a characteristic impedance of 100 ohm
differential pair and a wiring pattern of Q-S-Q (where Q = quiet line terminated to Zc; S - active differential pair) within the pin field of the connector. Resonances in the loss data
which may be caused by impedance mismatches at the ends of the cable assemblies are not included in the loss calculations.
For more information on any of the products included in this chart, click on the series name in the Key to get complete testing information, visit our website at www.samtec.com,
2
or contact our High Speed Cable Group at [email protected].
Revised: April 09, 2015
©Samtec,
Inc.
SAMTEC CABLE BANDWIDTH PERFORMANCE SELECTOR
Single-Ended - RF Cable
Differential Pair - I/O Cable
CABLE 7dB
SERIES
PITCH
LENGTH INSERTION
LOSS POINT
GRF1-C
IJ5C
IJ5H
5,00 mm
152 mm
5.31 GHz
CABLE 7dB
SERIES
PITCH
LENGTHINSERTION
LOSS POINT
EPLSP
1000 mm
3.90 GHz
2.70 GHz
229 mm
5.31 GHz
2000 mm
305 mm
5.10 GHz
3000 mm
1.96 GHz
500 mm
4.59 GHz
4000 mm
1.08 GHz
750 mm
3.93 GHz
5000 mm
820 MHz
1000 mm
3.66 GHz
1000 mm
6.44 GHz
100 mm
9.50 GHz
2000 mm
2.56 GHz
300 mm
8.50 GHz
152 mm
7.20 GHz
1000 mm
3.50 GHz
229 mm
6.38 GHz
305 mm
10.0 GHz
305 mm
6.22 GHz
500 mm
6.20 GHz
HDLSP
HPDPI
750 mm
4.59 GHz
1000 mm
5.59 GHz
2540 mm
1.64 GHz
The information contained in this chart does not represent the potential maximum performance of the interconnect system. If your application appears to exceed the connector’s
rating from the chart below, the connector solution may still work. Please contact our Signal Integrity Group at [email protected] for additional support.
The data reflects the point where an insertion loss of 7dB occurs within the cable assembly. The data is based from a test circuit with a characteristic impedance and a wiring
pattern of G-S-G (where G = return; S = active differential pair) within the pin field of the connector. Please note that performance may not be linear to stack height.
For more information on any of the products included in this chart, click on the series name in the Key to get complete testing information, visit our website at www.samtec.com,
or contact our Signal Integrity Group at [email protected]. Click here for more information on our High Speed Characterization Report Test Procedures.
3
Revised: April 09, 2015
©Samtec, Inc.