Freendo Faucet Collections
2015
Type D
892-6157
Ceramic Cartridge For Single
Handle Pressure Balanced Tub &
Shower Faucet
Type E
892-6158
40mm High Ceramic Cartridge
For Single Handle Lavatory
Faucet
Type H
892-6161
Type F
40mm Ceramic Cartridge For Single
Handle Kitchen Faucet and Model
Numbers 191-6576 & 191-6577
892-6159
892-6160
Ceramic Cartridge For Single
Handle Pressure Balanced
Contractor Tub & Shower
Faucet
35mm Ceramic Cartridge For Single
Handle Pull-down or Pull-out
Kitchen Faucet (excludes Model
Numbers 191-6576 & 191-6577)
Type I Hot
Type I Cold
892-6162
Hot 20mm ¼" Turn Plastic Housing
Ceramic Cartridge for Two Handle
Lavatory & Bar Faucet
Type J Hot
Type J Cold
892-6164
892-6165
Hot & Cold 23mm ¼" Turn Brass Housing
Ceramic Cartridge for Two Handle Wide
Spread Lavatory Faucet
Type G
892-6163
Cold 20mm ¼"Turn Plastic Housing
Ceramic Cartridge for Two Handle
Lavatory & Bar Faucet
Type K Hot
Type K Cold
892-6166
892-6167
Hot & Cold 29mm ¼" Turn Brass Housing Ceramic
Cartridge for Two Handle Roman Tub Wide Spread
Faucet
LIMITED LIFETIME WARRANTY
Compass Manufacturing International warrants to the original consumer purchaser that the faucet be
free from defects in material and workmanship for as long as the original consumer purchaser owns the
home in which the faucet was first installed.
Compass Manufacturing International will replace, free of charge, during the applicable warranty period,
any part or finish that proves defective in material and/or workmanship under normal installation, use
and service. This warranty shall not apply to goods which have been subject to accidents, negligence or
improper installation.
Compass Manufacturing International recommends using a professional plumber for all installation and
repair. Compass Manufacturing International will, at its discretion, provide replacement parts for
installation by consumer for any parts that prove defective under normal usage and service with new or
equivalent parts. Replacement parts may be obtained by emailing the address below, calling the number
below or by writing to:
Compass Manufacturing International
Freendo Product Service
6702 Enterprise Drive
Louisville, KY 40214
800.626.3525
[email protected]
[email protected]
© Compass Manufacturing International
800.626.3525
(800) 626-3525
Fax (502) 361-0715
[email protected]
www.cmiproduct.com