Download Report

WE TAKE CARE OF EVERYTHING IN
THE ELECTRICAL CABINET
Users of connection systems have come to rely on CONTA-CLIP‘s broad portfolio of products – and
for good reason. Our products are developed in close consultation with users and under the strictest
quality standards. They are available worldwide and are designed to meet individual requirements.
Our quality ensures our future. Certifications are proof
of our outstanding quality. Quality management at
CONTA-CLIP is conducted in compliance with DIN ISO
9001 and the certification of our suppliers is a top priority for us. Our products also comply with the relevant
international standards.
We are very well positioned with products for all connection methods; our pioneering
solutions have made us a technological leader in many sectors. Whether you’re using
a screw-based, PushIn, tension-spring or stud-based wire connection system – our
portfolio is in line with market requirements.
There are many ways to implement an application: we always chose the best technical solution that ensures functionality and simple, safe operations. The proof lies in
Reliability and customer orientation are at the heart of our everyday business. We
personally deal with the concerns of our customers and offer them solutions that
are tailored to their needs. Give us a try!
Quality – made in Germany
our completely satisfied users.
Screw Connection System SRK | SSL
PushIn Connection System FRK | FSL
The clamping yoke transmits pressure from the screw to clamp
The PushIn design makes wiring convenient and ensures the
the wire conductor against the busbar. The required contact
maximum level of contact security! Solid and stranded wires with
force is generated by the torque applied to the screw. Because of
wire-end ferrules can simply be inserted directly into the terminal
its construction, the clamping yoke is able to provide the strong-
point. A stainless steel spring ensures that the wire automatically
est contact force and thus the lowest voltage drop.
established contact with the busbar.
APPLICATION ADVANTAGES
APPLICATION ADVANTAGES
• Cross-sections from 0.2 mm² to 240 mm²
• Cross-sections from 0.2 mm² to 16 mm²
• Pluggable or screw-on cross-connection system
• Wire connection requires no tools
• Two potentials can be guided in parallel
• Pluggable cross-connection system
• Cross-connections are possible between different cross-sec-
• Two potentials can be guided in parallel
tional areas using standard cross-connectors of up to 10 mm²
• PE foot contact on both sides, up to 35 mm², can be
snapped on (no screws) to the DIN rail
• Additional connections from 4 mm² to 240 mm²
• PE foot contact on both sides, can be snapped on
(no screws) to the DIN rail
Tension-Spring Connection System ZRK | ZSL
Stud Connection System HSKG
The tension spring is used to hold the wire connection securely
The Stud connection system secures the wires onto studs using
to the busbar. The stainless steel spring provides permanent con-
ring cable lugs thus establishing safe electrical and mechanical
tact force between the wire and the busbar. The tension spring is
connection to the busbar. Our hinged terminal covers provide
a fast connection method that can be used anywhere.
touch protection and finger safety for all connections and appli-
• Cross-sections from 0.2 mm² to 16 mm²
cations where you are transferring power.
APPLICATION ADVANTAGES
• Pluggable cross-connection system
• Cross-sections from 1.5 mm² to 300 mm²
• Two potentials can be guided in parallel
• Stud connection sizes: M6, M8, M10, M12 to M16
• PE foot contact on both sides, can be snapped on
• Accessory installation requires no tools
(no screws) to the DIN rail
• Covers and partitions are easy to customize for
different voltage levels
• Combi-nuts prevent connection errors
• Current carrying capacity of up to 520 A
Connection types
APPLICATION ADVANTAGES
Single-level and multi-level terminal blocks SRK | SRKD
Product highlights: screw connection technology
• Double-level terminals and double-level PE terminals,
with up to 10 mm² rated cross-section
• Two inner cross-connection channels for easy
distribution of potentials
• Wide variety of pluggable cross-connectors SQI
• Versatile auxiliary port with SMAG (pick-off terminals)
Single-level and multi-level terminal blocks FRK | FRKD
Product highlights: PushIn technology
• Compact design requires minimal space
• Pluggable cross-connection system FQI
• Well-designed line of accessories for reducing
your assembly and storage costs
Single-level and multi-level terminal blocks ZRK | ZRKD | ZIKD
Product highlights: Tension-spring technology
• Pluggable cross-connection system ZQI
• Vertical cross-connector ZQV: for multi-level terminals
• Integrated test pick-off at each potential on the
terminal blocks
Fuse-disconnect terminals SSIK
• Housing material with an extended temperature
range of up to 140 °C
• Two inner cross-connection channels
• Can be cross-connected to the SRK series of
feed-through terminals
• Built-in receptacle for a spare fuse
Test-disconnect terminals SPKT
• Four cross-connection channels
• Touch protection according to BGV A3
• Wide range of switching options with
one terminal series
• Innovative and comprehensive range of
accessories for all applications
Disconnect terminals FTRK | FDLI | FSIK
Installation terminals FRKI | FDLIS
• Wide range of functions achieved by combining the base
terminals with optimized matching accessories
• Optimized cross-section range for distributor installations
• Disconnect terminal: can directly hold an auto-fuse/
Fuse holder for micro-fuse
Initiator terminals FIK
• Spacious cross-section range: up to 2.5 mm²
rated cross-section
• Integrated busbar holder in the NT terminals: no additional
mounting plate required
• Compact design
• All PE terminals have the PE foot contact on both sides
• Optional LED display for signal monitoring
• Multi-level terminals for optimizing use of space
Disconnect terminals ZTRK
• Wide range of functions achieved by combining the base
terminals with optimized matching accessories
• Disconnect terminal: Can directly hold an auto-fuse/
fuse holder for micro-fuse
Initiator-actuator terminals ZIZA
• 3-wire and 4-wire initiator connections
• Integrated potential distribution, without any additional
cross-connector
• Optional LED display for signal monitoring
• Pre-assembled block variants are available which reduce
your installation work
Pluggable connection system ZST
• Voltage range up to 500 V at 24 A
• Touch protection according to BGV A3
• Locking, strain relief and coding
• Compatible cross-connect system ZQI
• Adapter for wall bushing
CONTA-CONNECT | Industrial electrical connectivity
• Plug-in LED display for AC/DC applications
SDK feed-through terminals
The SDK feed-through terminals are suitable for various
account the contamination degree 3. Cable cross-sections
applications involving device/housing technology. The co-
between 0.2 mm² and 6 mm² must be used. The feed-through
ordinated system components can be combined to achieve
terminals have a two-part construction and are for panel
various voltages – with a maximum voltage level of 1000 V
thicknesses of 1 – 4 mm. They are available in a screw-connect
(UL 600 V) for rated currents up to 32 A. The maximum
version or a screw/solder-connection version. The latter version
rated voltage is achieved by using the optional partition
is designed for encapsulated device requirements and provides
plates, spacer plates and adapter plates, while taking into
the optimal seal for each application.
The SSAB screw-shield connection clip and the SAB shield
ohm contact junctions. Our comprehensive product portfolio
connection clip are suitable for standard cable shielding.
enables many installation options: including busbar, DIN rail or
They enable EMC-compliant wiring with their contact
direct mounting.
surface areas. They also have low-impedance and low-
Transformer terminals TKS
On their output side, the TKS transformer terminals use
wide-opening body caps (which are attached to the terminal
our proven clamping yoke connection system. Their
housings when opened) and the open-sided solder hooks on
closed housing design ensures touch safety in compliance
the busbar result in simplified processing and significantly
with BGV A3. The housing material (PA 6.6 UL 94-V0)
reduced production times.
provides superior thermal stability for all areas of use. The
CONTA-CONNECT | Industrial electrical connectivity
Shield connection clip SAB | SSAB
Marking systems
It is important to mark cables, connectors and devices
so that there is unambiguous, logically arranged and
permanently legible identification. This helps to prevent
mis-wiring, increases safety and reduces work levels, which
in turn reduces manufacturing and maintenance costs
including those caused by production down-times. Our line
of marking products offers a practical solution for labelling
all types of equipment.
Housings
A wide variety of housings are available in different sizes
and materials (polystyrene, polycarbonate, polyester,
ABS and aluminium); these offer solutions for protecting
electronic circuits and for installing devices or terminal rails.
The application’s requirements determine which material
should be used for the housing.
Our line of accessories are well designed to fit with our
users’ requirements. Our accessories allow you to move
forward on a great number of technical applications with a
minimum of effort and parts. An overview of the portfolio:
• Cabling ducts
• Wire-end ferrules
• Cable gland systems
• Insulated connectors
• DIN rails
• Uninsulated connec-
• End stops | End supports
tors
Tools
There is also a wide range of tools available for the efficient
processing of conductors, wires and cables. Our product
line includes diagonal cutters, stripping tools, one-hand
cable cutters, crimping tools, screwdrivers, as wells as
punching and cutting tools for mounting rails and profiles.
CONTA-CONNECT | Markers and labelling, housings, accessories, tools
Accessories
GSM-PRO communications processor
GSM-PRO enables remote operation and maintenance,
from the decentralized control room or from the service tech-
and is used to control and monitor decentralized facilities.
nician. Our Android and iPhone apps are available to make the
It signals when the process has reached a certain status or
monitoring and control functions even easier. If you are using
specific limit. Digital and analogue inputs values can also
multiple modules and need a complete overview in the field,
be transmitted via e-mail or SMS (text message). The digi-
our Portal software offers an interesting solution.
tal relay outputs can be switched using an SMS sent
IRC relay couplers and MFR-IRC timing relays embody a new
cross-connections help to simplify your installation process. Our in-
strategy for the 6.2 mm coupling relays. Our five different relay
put/output relays and plug adapters for PLC/ribbon cable connections
versions provide optimized use of space, simple installations,
further simplify wiring and reduce the space needed in the electrical
ease of use, and excellent functionality. They can be adapted for
cabinet. For the Plus relay and the MFR timing relay, the fuse modules
various application requirements because of the interchangeable
can be used to easily add a micro-fuse to the output circuit.
mechanical relays and optocouplers (SSRs). Different coloured
CONTA-ELECTRONICS | Electrical and electronic coupling level
IRC interface relays
DC power supplies
Converter units
The operability of the electrical controller depends on
Whether for manufacturing, electrical machine and plant
the reliability of the selected power supply. A stable and
instrumentation, control engineering, power distribution,
safe power and voltage supply guarantees a trouble-free
building automation, or process engineering – it is always
production process in systems and mechanical engineering.
important to guarantee that the signal exchange between
Our product line includes many variants: including un-
the peripheral devices and the upper-level central control
smoothed and smoothed transformers, unregulated and
and instrumentation systems remains operationally safe.
regulated mains power supplies, as well as primary clocked
Our product portfolio includes a wide range of different
power supplies.
signal converters with different designs for meeting many
requirements.
Surge protection
Interface modules allow for a passive mechanical-electri-
When choosing the correct device for overvoltage protec-
cal implementation of standard connectors onto screw or
tion, it is important to consider the VDE regulations dealing
tension-spring PCB terminals. Because of their compact
with surge-voltage resistance, insulation, and lightning
design, clear terminal labelling, and their simple assembly
protection classes. The CONTA-PROTECT protection com-
onto TS 32 or TS 35 rails, this system represents an attrac-
ponents meet or exceed the VDE and IEC requirements –
tive alternative to a pure individual wiring approach.
providing users with many clear benefits.
CONTA-ELECTRONICS | Electrical and electronic coupling level
Electronic modules
PCB connectors
Our PCB terminals for connecting to the circuit board
The tension spring and PushIn wire connect methods offer
enable a variety of connectivity solutions that are both
further options. Because of their special design, they are well
efficient and reasonably priced. Wire-protection, eccentric
suited for use with vibrations, in a corrosive environment or
tappet or clamping yoke connection types are available.
with extreme temperature fluctuations.
Our line of connectors is rich in variety and offers many
nector product portfolio. The key features here are outstanding
different wire connection options. This great range of com-
ease of use as well as adjacent alignment and coding without
bination options is made possible by our diversified con-
loss of poles.
CONTA-CON | PCB connection systems
PCB plug-in connectors
Services
CONTA-CLIP is able to meet the requirements and chal-
pete terminal rails onto DIN rails. We can also label according
lenges of our customers by offering a range of custom
to your requirements and assume responsibility for the
solutions, including customized housing preparation,
component storage. Thus you only need one part number
terminal rail assembly and customized designs/construc-
to specify a complex pre-assembled unit. We can then take
tions. We can prepare DIN rails and housings according
responsibility for the storage of individual components and
to your specifications and fit these with cable glands or
for the component list.
customer-specific products as needed. We assemble com-
At CONTA-CLIP, we are well known for mass-produced
that match your custom requirements: including design, pro-
functional electronics products – such as relay modules,
curement of components, production, delivery and after-sales
interface units, power supplies and surge protection units.
support. We are your single-source solutions provider – from
However, we also offer many customized solutions. Our
design to production, for small or large jobs, and for simple or
experts will work together with you to develop prototypes
complex functional units.
ECONOMIC
COMPETENT CONSULTING FUNCTIONAL SECURITY
CUSTOM-FIT SOLUTIONS
MANUFACTURE LABELING
COMMUNICATION AMONG EQUALS
INNOVATION
Services and special electronics
Special electronics
LOGISTICS ASSEMBLY ENVIRONMENT
www.kontor-media.de
www.conta-clip.com
CONTA-CONNECT
[Connection Systems]
CONTA-ELECTRONICS
[Electronics]
CONTA-CON
[PCB Connectors]
CONTA-CLIP Verbindungstechnik GmbH
Otto-Hahn-Str. 7
Phone +49(0)5257.9833-0
D-33161 Hövelhof
Fax
+49(0)5257.9833-33
[email protected]
www.conta-clip.com