VENCO - POTTERS WHEELS
Including
VENCO - COMPACT - SIT DOWN, CONE
DRIVE POTTERS WHEEL
VENCO No 6 Potters Wheel 280mm [11”] Wheel head
For details see page 2
VENCO - STANDARD - SIT DOWN, CONE
DRIVE POTTERS WHEEL
VENCO No 3 Potters Wheel 330mm [13”] Wheel head
VENCO No 5 Potters Wheel 330mm [13”] Wheel head
For details see page 3
VENCO - ELECTRONIC - SIT DOWN,
POTTERS WHEEL
VENCO Direct Drive Potters Wheel 330mm [13”] Wheel head
For details see page 4
VENCO No 7 High Tourque Potters Wheel 330mm [13”] Wheel
head
For details see page 5
VENCO - COMPACT - SIT DOWN, CONE DRIVE POTTERS WHEEL
A VENCO Compact Cone Drive Wheel
AVAILABLE MODELS:
 No. 6
0.18kW (¼ HP) Motor, 280mm (11") WHEELHEAD. $940.50

DESIGN:

Size: 584mm x 482mm x 533mm high.
 Main bearings: Self lubricating bronze
with double "O" ring seals.

Weight: 25kg
FEATURES:

Freewheeling wheel head.

Light weight and compact.
 Corrosion resistant Aluminium tray and wheel
head. Steel frame/body zinc plated and powder
coated for extreme corrosion resistance.
Linkage bearings: Self lubricating polyurethane for vibration damping.

 Speed range: 0 - 240 RPM, infinitely
variable dependant on foot pedal position.
 Guaranteed for 12 months against defective
parts or faulty workmanship.
 Shaft: 19mm ( ¾") diameter ground
steel

Low cost.

Comfortable padded seat as standard.

Foot operated speed control.
All internal components zinc plated.
 Resilient mounted motor for smooth
quiet operation.
 All control linkages mounted on vibration resistant, lubricated for life polyurethane bearings.
A VENCO No 3 Potters Wheel
VENCO - STANDARD - SIT DOWN, CONE DRIVE POTTERS WHEEL
Venco No. 3
Full size ergonomic Action pedal
Now w
ith a 3 Venco No. 3
yStainless
body option
ear steel
w 330mm
rra(13”)
1/2hp motor, a
ntywheel
1/2hp motor, 330mm (13”) wheel
head
head
AVAILABLE MODELS:
 No.3
370W (1/2 HP) Motor, 330mm (13") WHEELHEAD.
$1,131.90
 No.3 S/S 370W (1/2 HP) Motor, 330mm (13") WHEELHEAD. Stainless Steel

$1,263.90
 No.5
$1,217.70
370W (1/2 HP) Motor, 330mm (13") W/H. (‘No 5’ ) - with speed lock
 No.5 S/S 370W (1/2 HP) Motor, 330mm (13") W/H. (‘No 5’ ) - with speed lock, Stainless steel
DESIGN
$1,349.70
FEATURES:
 Shaft: 19mm (¾") diameter ground
steel.
 One of the hardest wearing wheels available –
used by many schools world wide.

Weight: 30kg.


Size: 685mm x 508mm x 558mm high.
 Speed range: 0 - 240 RPM, infinitely variable
dependant on foot pedal position
 Main bearings: Self lubricating bronze
with double "O" ring seals.
 Linkage bearings: Self lubricating polyurethane for vibration damping.

All internal components zinc plated.
 Resilient mounted motor for smooth
quiet operation.
 All control linkages mounted on vibration resistant, lubricated for life polyurethane bearings.

Low cost.
Freewheeling wheel head
 Corrosion resistant Aluminium tray and wheel
head. Steel frame/body zinc plated and powder
coated for extreme corrosion resistance

Light weight and compact.
 Foot operated speed control. An additional
hand operated speed control with or without speed
lock is available.
 Comfortable padded seat available as optional
extra.
 Guaranteed for 12 months against defective
parts or faulty workmanship.
VENCO - ELECTRONIC - SIT DOWN,
POTTERS WHEEL
FEATURES:
 Motor: Direct drive 550W (3/4 HP)
permanent magnet
- no belts or pulleys (nothing to tension, no
belt thump)
- brushless design (maintenance free)
- ultra quiet and incredible low speed torque
 330mm (13") wheelhead with two removable bat pins
 -constructed from marine grade aluminium

Die-cast aluminium tray
 -constructed from marine grade aluminium

-very strong even in class-rooms
 Two legs under wheelhead - where
greatest stability is required.

Wireless foot pedal (radio control).

- no trip hazard

- simply put it where ever you want it
 - speed hold feature; set the speed and
take your foot off
OPTIONAL EXTRAS:
 Clip-on tray shelves - hand oiled plywood with aluminium brackets
 Standard wheelhead bats - drilled with
holes to match wheelhead. (hand oiled plywood) approx 340mm diameter

- ergonomic, low profile pedal
 Intelligent microprocessor based control system for smooth, precise control

- super quiet and smooth

can be used as a floor or table model (remove
legs)

'easy clean' touch pad control on side of wheel

- forward and reverse button
 Riser bats - increased thickness bat for
 - finger-tip speed control buttons perfect for
increasing the wheelhead height above that of speed control while decorating
the tray rim for throwing large diameter plat all stainless steel body and legs. Structure guarters etc. Made from hand oiled plywood.
anteed for 10 years
 Stand-up kit. - stainless steel extension
legs for stand-up throwing. Increases wheelhead height to 84cm (33") from floor level.

Energy efficient - low power consumption.

0 -300 RPM

compact for easy storage

 Leg feet. - extra feet may used to adjust

the height of the wheel to personal taste. Up
to three feet may be used on each leg. Each
foot increases the height of the wheel by
22mm ( 7/8"). A set of three feet (one for each
leg) is supplied as standard with each wheel.
CE approved
110V- 240V 50/60hz operation
 550W Motor, 330mm (13") WHEELHEAD.
$1,540.00 inc
VENCO - ELECTRONIC - SIT DOWN,
POTTERS WHEEL
Venco’s top of the range pottery wheel. The No.7
model fractures a powerful, permanent magnet,
DC motor to deliver exceptional torque throughout the sped range.
The No.7 is designed to provide a lifetime of trouble-free throwing for potters who demands control and increased power.
The No.7 comes with a three year warranty.
FEATURES:

Motor: Direct drive 550W (3/4 HP) permanent
magnet

330mm (13") wheel head with connecting rings

Industrial motor speed controller for smooth
speed control

0—450 PRM

One price marine grade aluminium splash tray.

Low wear poly V-belt drive, for zero slip at low
speeds
 Electric wheel No. 7
application
$ Price on

Strong steel body, zinc plated and powder-coated

Whisper quite and low vibration operation

48 kg

L x W x H 66 x 57 x 45 cm [26” x 22” x 21”]
OPTIONS AVAILABLE:
AVAILABLE FOR:
$ including GST
Three Peg in wheel for fitting bats
All Wheels
$50.60
Separate Seat
Std Cone Drive
$151.80
Stand-up Kit
Std Cone Drive
$221.10
Work Tables
Each
$82.50
Standard Batt
Each
$48.40
Riser Batt
Each
$68.20
SPARE PARTS:
AVAILABLE FOR:
$ including GST
Drive Wheel Assembly
All Cone Drive Wheels
$129.25
Wheel head 280mm (11”) Complete with shaft
Corresponding Wheels
$151.80
Wheel Head 330mm (13”) Complete with shaft
Corresponding Wheels
$
Motor—180w (1/4HP) + cradle & spring
Corresponding Wheels
$448.80
Motor—360w (1/2HP) + cradle & spring
Corresponding Wheels
$495.00
Drive Cone
All Cone Drive Wheels
$62.15
Bush bearing kits
All Cone Drive Wheels
$40.70
‘O’ Ring
All Cone Drive Wheels
$2.75
Fibre Washer
All Cone Drive Wheels
$2.75
Stainless Steel Washer
All Cone Drive Wheels
$2.75
Shaft Locke
All Cone Drive Wheels
$38.50
Springs— Small
All Cone Drive Wheels
$9.35
Spring—Large
All Cone Drive Wheels
$15.95
Resilient Polyurethane shaft mounts
All Cone Drive Wheels
$3.85 Each