1. home and garden
2. home improvement and repair
3. power tools

TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 1
This is the most current list of sawmill equipment for sale. This service is simple and straightforward. Buyers purchase directly from the
sellers and the sellers pay our fee. Please let us know if you are interested in any of this equipment or if you want to receive monthly
mailings. Also, please let us know if you have any equipment for sale.
Call 800-459-2148 and ask for Linda
Write Linda at P. O. Box 710930, Houston, TX 77271-0930
SAWMILL EXCHANGE is mailed monthly FREE OF CHARGE anywhere in North America
Please let us know if you would like a subscription
Call 800-459-2148
Band Sawmills
STATE
AD #
Band Mill Tools
PRICE (U.S.)
Indiana
16226
NEWMAN HP-688 HYDRAULIC COLD PRESS. Side Loading Hydraulic Segmented Platen
Cold Press. 8- 5.5”d cylinders drive 4 individually actuated 25” x 60” platens for a total press
capacity of 103” x 60”. Daylight Opening: Max 30”, Min. 6”, 24” Stroke. Each Platen has a
dedicated 3-way hydraulic valve. Approx. 50 PSI over each platen. Complete with 5hp
hydraulic pump.
$18,500.00
Massachusetts
16308
Hawk H-1000 Log Loader . Truck NOT included. Good Working Condition, used daily.
$3,300.00
Ohio
16085
Kent band wheel crowning tool
$1,800.00
Pennsylvania
16247
Chop saw, whirlwind, bottom-fed blade; air-activated, 18"; still operating;
$2,500.00
STATE
AD #
Band Sawmills, Complete Operations
PRICE (U.S.)
15745
Sawmill Operation: 2001 Wood-Mizer LT40HDG42 Super Hydraulic, 42 HP Kubota diesel
engine, remote operator station with Accuset, debarker, trailer package, 15' 2-strand live
deck with stop & load, Moon's automatic sharpener with built in setter 220V. 2-saw 2" x 24"
edger, 25 HP 3-phase. Tannewiitz single head vertical band resaw, 16"x 3" with hydraulics,
16"x 16" or more capacity without hydraulics, Pineiro 4-sided planer 8"x12" capacity, 7.5 HP
motors, sawdust blowers with piping, 25 HP 3-phase, includings tooling for plaing, tongue &
groove, log siding, over a dozen more applications. Wood-fired dry kiln, various roller beds,
dust troughs, other transfers and decking.
$55,000.00
7799
Dimension mill: Esterer sash gang, 40 extra 6" blades, Miner 4"x32" 3-saw edger, Bush
chipper w/shaker and vibrating conveyor, 20' end trim, 70' 3-strand green chain, 100' bark
conveyor, infeed & outfeed rolls. Electric power on edger. Detroit runs everything else.
10-12 man operation.
$120,000.00
8047
Sawmill operation: E. Povlsen 5" high production double cut bandmill, 36"x42" throat
capacity, fully hydraulic, 50 HP electric, live infeed, 50’ bed with forward and reverse,
Omron PLC computer setworks, stationary operator s position, 2 adjusting log turners, 2
timber turners, 3 air kickers, blade lubrication system, log/timber kickers, 3 leveling arms, 5
- 24 adjustable backstays, extra 5" bands, electric and air controls, Plexiglas sawdust screen,
33’ x 24" 12 roller powered outfeed roll case with integrated lifting arms. Easy to
breakdown and loadi.
$55,000.00
15351
Sawmill operation: Breezewood, hydraulic feed, hydraulic up/down, 38 HP Kubota diesel
engine, 100 extra bands, operator seat, track extended to 46' length for log home work.
Handles logs up to 30" diameter. Set up stationary. All locally available parts. Edmiston 4" x
24" 2-saw edger, split blades, I movable blade, extra set of blades, 70 HP Isuzu diesel engine.
Looks and runs like new. Morgan 24" chop saw, 4 stops, currently hooked up for hydraulic
power off the edger. Will sell with or without hydraulics. 30' belt conveyor, 10" width,
currently using for slab recovery, hydraulics included. Two 15" x 10' gravity lumber rolls
with stands.
$26,500.00
Alabama
Alabama
British Columbia
Delaware
Ohio
Ontario
Complete Precut Setup. 4 Strand 10' Greenchain, Unscrambler, Heavy Duty Chopsaw with
Hydraulic Infeed and Outfeed with Air Stops. Single Head Baker Resaw with Complete Run
16273 Around including Automatic Infeed, sizer and deduster. Everything runs with Hydraulic or
Updated Air. 4 Cylinder 140 HP John DeerePower Unit with 8100 hours. Also includes Blower with a
10' high stand and all the duct work. Hydraulic pumps, tank and line shaft included. This
same as AD #16272
13733
Complete sawmill operation: Morbark rosserhead debarker, 50 HP 3-phase electric 575V,
loaded by Patrick 14,000# wheel loader with 4' articulating arm, bucket and log forks, log
kicker sends log to 20' 2-strand infeed deck with stop & load, 2005 Heartwood Model 310,
70 HP 3-phase electric 575V, 10 HP on hydraulics, includes 25 6" double cut bands, two sets
of 40' of live outfeed rollers, one to Morbark 3-knife chipper with knife grinder, horizontal
feed, bottom discharge to 60' barnsweep, 50 HP 3-phase and the other to Marathon 24P 2" x
24" 2-saw edger with laser sight, 10 HP 3-phase, 20' live rollers to 24" end trimmer on
stationary arbor, live outfeed rollers to greenchain. Mill only operated for 13 months.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$42,500.00
$130,000.00
Reduced
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 2
Vermont
13978
Sawmill operation: HMC Model 206 Hummerhead rosserhead debarker, 12' 4-strand infeed
deck with stop & load and barnsweep, SANBORN Min-Max customized for up to 8" double
cut blades, includes 19 7" serviceable saws, operator cab, SilvaTech setworks, 4 headblocks,
handles logs 30" diameter x 21' length, 50 HP 3-phase power, 25 HP hydraulic power pack,
10 HP Sullair screw-type air compressor with Motivair twin tower air dryer new in 2003,
includes MELLOTT 60' outfeed conveyor. 12' transfer deck 4'-strand with rooftop chain,
leads to HOSMER (HMC) 6"x42" 3-saw bull edger, can add extra blades, 30 HP 3-phase, 16'
outfeed rollcase, 24" width, 6" rollers leads to 4-strand 20' greenchain. PRECISION 48"
3-knife ChipPac, 75 HP 3-phase, dual loading system with vibrating conveyor, sawdust
blower, dust chutes, 5'x5' screens. LAVCOR 42" sawdust blower with cyclone, 25 HP, built
very heavy duty. Everything powered by 3306 CAT genset, 11,000 hours, still in great
condition. Includes all electrical, motor controls, heated air system, and 198. Has been
producing only small logs 12" and smaller and averaging 7,000 board feet daily in grade and
10,000 or more board feet daily in softwoods. Capable of much more daily production with
larger logs and upwards of 300 ties per day.
STATE
AD #
Band Sawmills, High Production
$150,000.00
PRICE (U.S.)
British Columbia
16276
1996 E. Povlsen Sawmill and CASE Terra Loader. Sawmill has fresh paint, very economical
to run. 5 " Double Cut Bands. Fully Hydraulic with ride on head rig, log turner, log leveler,
log dogs, blade guides. Capacity 19' X 36". 4 Cylinder Isuzu Diesel Engine, Tandem Axle
Towing Package. Includes 12 blades, automatic freestanding sharpening system, 1 roll of
banding lumber strap. Low hours - approx 600 on mill. CASE Terra Loader with 2 Wheel
Drive, 4 Cylinder Perkins Engine, Log and Lumber Self Leveling Forks, bucket with fork
pockets for quick change and set of tire chains.
Connecticut
12161
2002 Timber Harvester 36HTE25, 24' track, fully hydraulic, remote control with 100' cord,
debarker, extra blades, 25 HP 3-phase, around 150 hours. Includes WoodMaster 725 ProPak
moulder/ripsaw/sander, 100 hours.
$25,000.00
Massachusetts
11736
2003 Wood-Mizer LT70, trailer package, remote operator station with AccuSet, outfeed
table, 10 boxes of bands, many extra parts and components, new Cat 62 HP diesel motor,
5000 hours on the mill, 800 hours on the new motor. Regular maintenance. Running daily.
Can see in operation.
$35,000.00
Reduced
Michigan
9971
1990 Sanborn Min-Max, 4" to 6" single cut, fully hydraulic, 50 HP 3-phase, 4 bunks, 18'
carriage, computer setworks, 16' live 3-strand infeed deck, board kicker, live outfeed.
Includes extra bands, Armstrong #2LH grinder w/swaging tools and tensioner.
$52,000.00
Reduced
New Mexico
15690
Sanborn Min-Max , 6" single cut, fully hydraulic, 40 HP 3- phase, 4 headblocks with
extended log carriage, live outfeed, hydraulic log turner and tapers, includes electrical
disconect with soft start. Also includes #2 Armstrong grinder and extra 6" bands. Saws logs
up to 30" diameter x 36' long. will trade for scragg mill or automatic circular saw.
$28,000.00
Ohio
15276
2005 Heartwood Model 310, computer setworks, track extension to cut up to 40' length, 12'
live outfeed deck, running off 135 HP Cat genset, includes upgraded log turners and twelve
6" double cut bands.
$29,500.00
Reduced
Ontario
12353
2003 Berringer Band Sawmill, 2-post, heavy built, approximately 10,000 lbs, fully hydraulic,
30 HP 3-phase 575 V, operator cab with joystick control, guide wheels for 1 1/4" 1 1/2" and
2" bands, 75 extra Lenox 1 1/2" bands, cuts logs 33" diameter x 16' length, 2005 Baker 16'
3-strand live infeed deck with stop & load, plumbed into operator cab, 10' x 22" live outfeed
belt conveyor, 3 sets 20' dead rolls, Cook's Cats Claw automatic sharpener with manual
setter and 4 cams, 2005 Baker 2" x 24" 2-saw edger, 15 HP 3-phase 575 V. Never run any of
the equipment hard. Producing 4,000 to 7,000 board feet per shift. Can see running.
$45,000.00
Oregon
15934
Twin 6' Klamath iron works band mills infeed and outfeed drive sprockets for sharp chain
(not available)
$20,000.00
Vermont
15660
2004 Select Model 4221 with Select 24' live infeed deck and 25 3-strand greenchain, 115 HP
John Deere diesel engine, larger hydraulic pump, neoprene blocks, many extra parts. 2005
Select debarker with Select 24' live infeed deck, two 24HP Honda gas engines run debarker
head and hydraulics, extra blades, grinder. Over $220,000.00 replacement cost.
$95,000.00
STATE
AD #
Band Sawmills, Hydraulic
PRICE (U.S.)
Delaware
15529
Breezewood, hydraulic feed, hydraulic up/down, 38 HP Kubota diesel engine, 100 extra
bands, operator seat, track extended to 46' length for log home work. Handles logs up to 30"
diameter. Set up stationary. All locally available parts.
$11,500.00
Georgia
16330
New
Wood-Mizer LT40 Hydraulic. Older machine but totally rebuilt! New 30 HP Kohler fuel
injected engine/0 hours. All new chains, new band wheel belts, new roller guides, new
brakes/tires/wheels. 12' Wood-Mizer extension. Good condition.
$17,500.00
15007
1998 Woodland Pro-4000 w/2-saw 4" x 19" edger, 38 HP Kubota diesel power on sawmill, 13
HP Honda gas engine on edger. Includes Cook's band wheels, Cook's roller guides, Wright
automatic sharpener with manual setter, some extra 1 1/2" bands. Cuts logs 32" diameter x
16' length. Only 200 hours.
$14,000.00
Reduced
Idaho
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$27,500.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
Kentucky
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 3
Timber Harvester 30HT25 Fully Hydraulic. Lombardini 27 HP Diesel with < 1400 hours.
16225
Have recently replaced all hydraulic hoses. Has Joy Stick Control. Cuts 30" diameter X 25'
Updated
length. Includes approx 20 extra bands. Currently in operation and can demonstrate.
$17,500.00
Kentucky
16074
S&W Edger Works Incorporated, S&W 700 Horizontal Band Mill With 75HP Motor, 29 Extra
7" Bands,Hydraulics With 25HP Motor, Cab & Controls (Computer Set Works), Log Deck,
Barn Sweep. Capacity is 28' X 48" single cut saw.
$35,000.00
Reduced
Kentucky
15831
Min-max Sanborne sawmill 6" bands with diesel power. Can see in operation.
$30,000.00
Louisiana
16334
New
2010 Cooks MP-32. 30 HP Kohler gas engine, 7 HP Kohler gas engine for hydraulics, trailer
package with spare tire. Many extras: 12 volt head up/down/forward/reverse. Loading Winch
Turner System. Third Squaring Arm. Log Loader Ramps. Metal Cant Hook. Blade Alignment
Tool. Cat Claw Sharpener and Single Tooth Setter. Extra Blades.
$18,900.00
15927
1998 LogMaster bandmill, Now called LM4, Inside since new, original owner with just over
5,500 hours. Fully hydraulic operation, Dragbacks, 36" capacity, 26'6'' cut length, 55 hp
John Deere diesel. Set up to run 1 ½" bands. Mill saws ⅛" accuracy in 26'. 30 extra saw
blades, extra parts, Cooks saw sharpener, Timberwolf dual tooth setter, Equipment in
overall excellent condition.
$21,000.00
Manitoba
16329
New
2006 Timberking B20, Hydraulic with 28 HP Kubota diesel and 6.2 HP Kubota diesel for
hydraulic drive. Includes: 24' transport package, Log loader package, Hydraulic log stop,
Log turner, Locking dog, Hydraulic toboard, Log indexer (set works kit), 6 gal gas tank, Log
debarker, ultra blades, Wright auto blade grinder, Dino setter, Dual tooth setter, Talon 900
frame package with 25 HP kohler engine. Only 35 hours.
$38,000.00
Michigan
16348
New
1997 Wood-Mizer LT40 Super Hydraulic. Includes Trailer Package, Debarker, Shingle
Lapsider. 35 HP Wisconsin gas engine with 9000 hours.
$15,500.00
Michigan
16351
New
Custom built hydraulic band mill. Capacity 26' X 30". 40 HP Isusu diesel engine. Includes
hydraulic log turner and clamps. debarler/ Sawyer rides along carriage. Rebuilt 3 section
hydraulic pump with 33 gmp @ 2100 rpm per section. 14 spline 1 1/4 shaft. Was built for 3
head resaw.
$12,000.00
Maine
Mississippi
Mississippi
Morgan Logsaw high production band sawmill, 20' 2-strand live log deck with stop & load,
12880 30" bandwheels, runs 4" bandsaws, electric over hydraulic, all hydraulic log handling. Set up
Updated stationary. Customized to cut logs 30" diameter x 24' length. 50 HP on headrig, 25 HP on
hydraulics, extra hydraulic motor.
$15,000.00
16281
S&W 125 with 40 HP electric engine. 5 HP for hydraulics. Capacity 30" X 20'.
$18,500.00
Missouri
15445
Woodland K-4 with Woodland edger, fully hydraulic, 20' cutting length, 4th headblock,
debarker, includes 2-strand 11' live deck, single phase power, 20 HP hydraulic power pack
powers hydraulics and edger, includes starter boxes, averaging 250 ties per week. Also
includes extra gear motor, bearings. Price firm.
$10,500.00
Reduced
Missouri
16126
Keenerbuilt Band Sawmill: Hydraulic, 15 HP Kohler gas engine, sharpener, Capacity 30" x
16'
$6,000.00
Montana
11598
1996 Cutting Edge, automatic up/down, automatic feed, 22 HP Briggs & Stratton Vanguard
gas engine, extra bands, DynaSaw manual sharpener with manual setter, 36" diameter x 26'
length. Original owner. 265 hours. Set up stationary.
$12,500.00
New Hampshire
1987 Sanborn Min-Max, fully hydraulic, 25 hp Kohler gas engine, factory trailer package,
hydraulic log turners and log dogs, board kicker, debarker, extra 5" blades. Has capacity to
15862 handle 36" diameter logs 4-24 feet long. Log cleaner. Oil Motor drive, 8"0 inserted tooth saw.
Updated Log cleaner reqires 15 GPM included, Extra headblock including connecting chain and
combination Board dog, hand operated, Taper attachment per head. Kept in excellent
condition. Can see running.
$20,000.00
Reduced
New Hampshire
16197
SanBorn Min Max Model H225, Year 2000. Hydraulic set works, hydraulic feed. Capacity 24'
length x 39" diameter. 25 HP Kohler gas engine. Can cut approx 3000 bf per day with 3 men
operating. Includes about 12 extra blades. Kept under cover but is portable. Currently
working and can demonstrate. Uses 2" bands.
$14,900.00
New York
16286
Logmaster LM5 with 82 HP Cummins diesel engine. 1200 hours. Includes debarker, log
loader, manual set works and blade sharpener. Capacity 24' X 30". Comes with trailer
package.
$29,000.00
New York
15992
2013 Timberking 1400, hydraulic blade feed - up/down, 25 HP Kohler gas engine, toe boards,
manual log turner, trailer package, 15 extra saw blades, log ramps, approximately 250 hours.
Can demonstrate.
$12,000.00
Reduced
New York
15091
2008 Hud-Son Farm Boss H360, hydraulic log turner, hydraulic log loader, 23 HP Briggs &
Stratton Vanguard gas engine, trailer package, includes all new belts, shafts, bearings, tires,
new drive motor. Always under cover. $17,400.00 new.
$13,500.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
Ontario
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 4
1996 Wood-Mizer LT30HDE25 Super Hydraulic, 25 hp 3-phase 575V, debarker, operator
15533
seat, includes 2-strand live deck that feeds into sawmill log loader. Also includes
Updated
Wood-Mizer automatic sharpener with manual setter. Always in a building. 7000 hours.
$19,900.00
Pennsylvania
16341
New
2013 Baker Model 3665 D with 65 HP Cummins diesel engine, 36" wheels, runs 2" band,
heavy I beam frame, computer set works, debarker, log turner. Cuts 4500 bf per day. Does
not include trailer package.
$39,000.00
Pennsylvania
16153
Timber Harvester Bandmill, 15 HP Vanguard gas engine, Hydraulic up/down, Hydraulic feed,
Uses 1 1/2" bands, 17 extra bands, Cuts 10' length logs X 26" diameter, Has manual log
clamps, Saw Guide, Portable, Good working condition
$7,000.00
Reduced
Pennsylvania
16192
2005 Timber Harvester 30HT25 -- Fully Hydraulic Band Sawmill with Hydraulic Log Turner,
Log Loader, Tapers, Log Clamps, Log Posts, Sawguide. 27hp Kohler - Gasoline Engine, very
low hours, 4 Extra Blades (1 new, 3 reconditioned). New Battery
$20,000.00
Pennsylvania
15959
1999 Woodland Pro 4000. 3 phase electric motor, fully hydraulic with automatic setworks, 1
extra set of blades, built in edger. Good condition.
$13,500.00
Reduced
South Carolina
16228
TimberKing 2000 Fully Hydraulic, 35 HP Kabota Diesel. Computer Setworks, less than 400
hours.
$33,000.00
Tennessee
16306
1998 S & W model 125, fully hydraulic mill. Includes 30 HP electric motor and complete
with set works. Capacity 21' X 25". Many updates with air bag blade tensioner, latest
version of hydraulic stops and dogs, new retrofitted roller guide assembly and dual super
drip /wipe system blade oiler from cooks. Mill is operated daily. Mill produces between 3500
- 5000 board feet per 7 to 8 hour work day, depending on log conditions.
$20,000.00
Tennessee
15981
Timberharvester, hydraulic band mill, log turner, debarker, 3 phase power
$16,000.00
Washington
16202
2012 LogMaster LM4. Fully Hydraulic. Capacity is 24 1/2' Length X 36" Diameter. 51 HP
Cat Diesel engine. Low hours - approx 150. Includes all basic model options, 3 log loaders,
chain turner plus computer set works. Machine averages approx 380 bf per hour of 2xs with
1 worker.
$40,000.00
Reduced
Wisconsin
15243
Custom built band sawmill, automatic feed, hydraulic log turner, hydraulic log clamps,
hydraulic toe boards, winch up/down, 35 HP Wisconsin VH4D gas engine, 20" band wheels.
Set up stationary. Handles logs 24" diameter x 24' length. Only 30 hours.
$9,500.00
Reduced
STATE
AD #
Band Sawmills, Manual
PRICE (U.S.)
California
16291
2010 TIMBERKING 1220 SAWMILL WITH 20.5 FOOT BED AND 25 HP ENGINE. Excellent
condition due to being under a shed roof and the carriage is covered when not in use.
Factory Upgrades include 25 HP Kohler engine, transport package, extra bed section and
log loader. Hour meter added to keep the service intervals in check. Currently showing 142
hours. Includes the Timberking and Kohler manuals in addition to several boxes of blades, a
quarter scale gauge, spare wheel and tire, and extra guide roller bearings. Excellent
machine. Come try it out. I got logs. Free orientation and lessons included. Replacement
cost is $11,300.00. Sale price $8,995.00
$8,995.00
California
16218
2002 Baker EZ mill, 16 HP Briggs & Stratton gas engine, cuts 20" diameter x 9' length. Paid
$3,800 new. Under 100 hours. Original owner. Can demonstrate. Price firm..
$4,000.00
Illinois
16342
New
2008 Logmaster LM1 with 15 HP electric start Kohler gas engine, log loading ramps, trailer
package. Capacity 30" X 16'.
$6,500.00
Illinois
14569
Shop-built light duty band sawmill head assembly, designed to saw without a track. The
14"-wide saw head is mounted in a free-rolling 30" long frame with 4 casters, and has a 6.5
hp gas motor, 12" bandwheels, runs 1" bands, and saws logs from 12" to 20" diameter. The
log sets on two 30" long 6"x8" cants which must be placed on a flat surface. One log clamp
and one small log stop are bolted into each cants.
$1,550.00
Michigan
16115
Shop built band sawmill with hydrostatic up/down/forward/reverse. 3 cylinder Kabota diesel
engine. Capacity is 20' X 24". Can be portable as it comes with loading ramps/wheels.
Manual log turner. Debarker.
$8,500.00
Minnesota
16346
New
Woodland Band Sawmill. Electric start 24 HP Honda gas engine. Engine has over 1750
hours. 19" band wheels, 1 1/4" bands. Power feed and reverse. Mechanical log lift and
turner. Saws up to 16' length. Vertical band but head moves and brings boards back to you.
No bending over. 1 and 2 man operation. Portable with removable trailer tongue and wheels
with ball hitch. Includes approx 20 extra bands. In operation. All parts available locally.
$8,700.00
Minnesota
12707
Custom built manual band sawmill, 2 cyl. air cooled Wisconsin gas engine, cuts logs up to 28"
diameter x 16' length.
$2,750.00
Missouri
Missouri
16290 2003, Like new Wood-Mizer LT40. Only 208.9 hours! Power Feed, Power Up & Down, Log
Updated Deck, and Trailer Package.
16333
New
2003 TimberKing 1220 with trailer package and 18 HP Kohler gas engine.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$16,800.00
$6,500.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 5
Missouri
16320
New
2014 TimberKing 1220. 18 HP Vanguard engine, 150 hours, Extra blades, Under warranty.
No trailer package.
$7,900.00
Missouri
15882
Delta Lumber Company portable band sawmill, 6 HP Briggs & Stratton gas engine, includes
15 blades, sawguides and braces, verticle attachment for edging. Saws up to 18"- 20" logs.
All manuals available. Missing the sawmill attachment. Good condition.
$1,600.00
2012 Wood-Mizer LT15G18, power feed, debarker, 18 HP Kohler gas engine, 6' extension to
16210
cut up to 24' length, 2 extra bands and 2 extra clamps. Original owner. Just over 150 hours.
Updated
No trailer package. Mill is stationary.
$7,000.00
Reduced
New York
North Carolina
16324
New
Wood-Mizer LT30 with 18 HP Kohler gas engine, 16' bed, trailer and box of extra bands.
$7,000.00
Oregon
15798
2006 Custom Built manual mill with electric lift and lower. Electric start 18 HP V twin
Briggs & Stratton motor. 30' deck. Can cut 22" depth by 27' long. Has removable trailer
tongue and wheels. Water lubrication system.
$5,000.00
Pennsylvania
16292
Simplicity Bandsaw with 18 HP Briggs & Stratton/Vanguard engine, trailer package, vinyl
cover, 8' extension. Capacity 30" X 16'6". Includes 30 extra bands.
$4,750.00
Texas
16131
Yates American 36" bandsaw, 15 HP, Will support a 2" band blade, Still in good shape.
Owner will load equipment upon sale.
$2,500.00
Texas
14382
2010 Mister Sawmill Model 30, 24 HP Honda gas engine, trailer package with spare tire,
extension to saw 20' length. Includes fender kit, loading ramps, loading winch, T-stands,
extra bands. Original owner. Under 30 hours. Just under $10,000.00 with all the extras.
$8,500.00
West Virginia
16067
Hud-son Oscar 30 manual band mill, year 2010 or 11. 16 HP Briggs & Stratten Vanguard
motor, Stationary but can be portable and loaded on back of truck. 4 sections of track
extensions total of 28'. Includes 4-5 extra bands. Low hours. Capacity is 30" X 23'.
$7,000.00
Wyoming
14969
2008 TimberKing 1220, upgraded to 25 HP Kohler gas engine, extras include transport
package, toe board package, extension to saw up to 20' length, extra bands, cant hook,
covers. $9,000.00 replacement cost.
$7,500.00
STATE
AD #
Band Sawmills, Upright Band Sawmills
PRICE (U.S.)
Arkansas
11310
8' Prescott upright band sawmill, motorized strain and guides, includes three 11" bands. No
power.
$16,000.00
British Columbia
15706
Jonsered 30" upright band headrig, 10HP, new rubber on balanced wheels, shingle making
capability, includes sliding table and air sets. Easy to breakdown and load.
$4,500.00
California (North)
15026
Montgomery 36" upright band saw, 10 HP 220V 3-phase power, includes Tannowitz blade
guides, frequency drive. Handles up to 12"x12" material. Runs up to 2" bands. Very heavy,
cast iron construction. Totally rebuilt with new precision bearings.
$3,995.00
Kentucky
15733
Upright band sawmill on 2-headblock, 10' carriage frame, 4-cylinder Kubota gas enigne,
rubber tire band wheels, handles logs 14" diameter x 10' length.
$4,000.00
Ohio
16118
Upright Band Mill: 26" band wheels, 3 headblock carriage, conveyor, Frick edger with split
saws (includes extra saws), 353 Detroit diesel, Mud wheels. 2 Meadows blowers with 40'
pipe, inlet is approx 8" and outlet approx 10". 250 gallon fuel tank. Kept under cover. Still in
use and can demonstrate. Capacity 24" x 10'.
$15,000.00
Pennsylvania
16133
Allen E. Miller 1.5 inch vertical bandmill
$15,000.00
Quebec
14027
54" upright bandsaw on Lane 16' right hand automatic carriage, 10" double cut blades, 7"
single cut blades, electric tensioning, 4 double headblocks with taper on each, Lane controls,
Silvatech setworks (with owners manual), joystick controls, Tyrone Berry feed works,
sawyers cab, log turner. Excellent condition.
$59,000.00
Reduced
Wisconsin
16318
New
Upright Band Sawmill with 3 headblocks, 45' track. Capacity 23' X 32". Uses 1 1/2" bands
that are 15' 9 1/2" long. Has 26" steel band wheels. Includes blower. No power.
$8,500.00
Wisconsin
15969
Heavy duty shop built upright band mill, 36" wheels, 2" band, Howell set works and
headblocks, 8' carriage with 2 headblocks plus 8' pup with 1 moveable headblock, Hand set,
right hand, hydraulic blade tensioning, cuts 22 +" wide and 26' long. Built in sawdust
blower. Requires very little maintenance.
$16,000.00
STATE
AD #
Band Sawmills, Wide Capacity
PRICE (U.S.)
Indiana
12715
2006 Dynatech 60" wide capacity band sawmill, 12 volt up/down, hydraulic double chain
feed, hydraulic chain log turner, hydraulic clamps, hydraulic toe boards, saws logs up to 60"
width x 20' length, 6 HP Honda hydraulic power unit, runs 1 1/2" to 2" bands. No power.
Original owner. Very low hours.
$32,000.00
Tennessee
16307
Hud-Son Oscar 52-31 in very good condition. Includes 31 HP engine, auto feed, height
adjustment, electric start, extra saw blades, track - 52: 7 foot section, power Feed Kit (set
for 14' track section.)
$13,500.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
Washington
14803
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 6
2002 Hud-Son Oscar 52", 23 HP Briggs & Stratton Vanguard gas engine, includes power
feed with adjustable speed control with forward & reverse, 25" bandwheels, 40' of
customized 1 1/2" angle iron mounted on channel iron track with 7 crossbars, 5 log clamps.
20 extra bands, automatic sharpener. Original owner. Maybe 50 hours. $21,000.00
comparable new.
$14,500.00
Circular Sawmills
STATE
AD #
Bolters
PRICE (U.S.)
16025
Bolter Mill 52" circular saw, hydraulic drive for carriage, pneumatic end dogging system.
Capacity 4' X 24" . No power. Good condition.
$6,600.00
Vermont
14926
J.W. Penney bolter mill, 40" inserted tooth headsaw with 24" inserted tooth top saw, 75 HP
on main saw, 50 HP on top saw, all hydraulic, single pedal drive, outfeed belt, grinder, extra
main saw, extra top saw. Under cover. Can see runnng. M attison 202 straight line ripsaw,
variable speed feed, new track and chain. Rips up to 4" depth and 36" width. Can see
running. Pull-down chop saw, 14" blade, 4' table, 3-phase power. Whirlwind sawdust blower,
8" intake, 6" outlet, at least 40' of heavy plastic piping, 15 HP 3-phase. Includes all electrical
panels, switches, disconnects. Will saw 8 - 8/5 feet comfortably. Can saw up to 9 '.
$6,000.00
Reduced
STATE
AD #
Circular Sawmills, 1 - 2 Man
PRICE (U.S.)
Illinois
Alabama
16328
New
Foley Bell Saw M14. Headmill 48" insert tooth blade Style F with 10' carriage. 18" X 14'
capacity, 30 HP, 3 phase 440 volt. Includes Jones saw grinder and other spare parts. Can
see operating.
Alabama
16278
Lucas 8-30, manufactured in 2012 and has 2 year warranty. Mill used for demonstration and
has less than 10 hours. 30 HP Kohler gas engine, electronic fuel injection, 3 new blades.
$16,500.00
Alaska
14709
2002 Lucas Model 827, 27 HP Kohler gas engine, shingle/lap siding attachment, track
extension to saw up to 20' length, 3 saws, tooth changing jig, banding tool and banding
material. Only 125 hours.
$11,000.00
Alaska
15023
1999 Mahoe Minimax 10" x 6" circular sawmill, 32 HP Daihatsu gas engine, includes track
extension to cut up to 25' length, extra saws, grinder, extra belts.
$20,000.00
Indiana
15919
Lucas mill 8-25. Low hours with extension and slabbing attachment, extra bar, about 12
extra chains and extra blades. Can demonstrate.
$20,000.00
Iowa
16352
New
Lucas Mill, Model 8-30 with 30 HP Kohler engine, extra blades, sharpening jockey and tooth
changing kit.
$10,500.00
Louisiana
14207
Mighty Mite 412 series head assembly, blades included. Needs track and power unit. Was
being used as an extra head assembly for another Mighty Mite sawmill.
$4,500.00
Maine
16125
KARA F2000 Stationary Sawmill: 42" saw ins tooth Double Hydraulic Pump Hydraulic size
adjuster Sawdust Blower On line saw sharpener Hydraulic log turner Top saw with electric
brake and 20 HP motor One log dropper Three thin curf saws with 40" stellite dipped
$39,000.00
Minnesota
16083
Custom Built in 2009 Swing blade mill with 35 HP Isuzu diesel, 5 HP Honda for carriage
(up/down, and drive thru). Capacity is 12 1/2' X 60". Includes a battery operated sharpener
and tooth changing tool.
$10,000.00
Reduced
Mississippi
15850
Mighty Mite Circular Sawmill. 1980 Model D412H. Electric with 50 HP, 440-480 V. Capacity
32' X 6'. 2 Edger Heads. Log Deck 16' Long and Hydraulic.
$14,000.00
New Hampshire
14766
Lucas 6", extended to cut 20' length. Crossbar damaged. As is. Buyer needs to disassemble.
Price firm.
$4,000.00
Reduced
15113
2008 Woodsman, manufactured by Woodsman Inc. as a smaller version of the Mobile
Dimension series, produces up to 6"x8" cants and smaller material out of logs up 46"
diameter x 16' length, 25 HP Kohler gas engine, automatic up/down, automatic feed/reverse,
board return, hand held grinder. Set up stationary. Original owner. Under 100 hours.
$8,000.00
16186
2004 Kara Master Sawmill: 100 HP 3 phase electric motor (575 V), includes all electrical
panels and soft starts. 48" Blade, Saw Mounted Sharpener, Hydraulic functions to handle
and turn logs. Mill can be Portable or Stationary. Infeed conveyor is 15' long. Custom cuts
logs up to 31' length. Has Kara Log Feeder to load 1 log on carriage at a time. All electric or
can be run with 70 HP PTO tractor. 2004 Kara Edger Option: 25 HP 3 phase electric motor
(575 V). Power Infeed Rollers. 20' Outfeed Conveyor. Twin 14" Carbon Tip Blades. Includes
'Industrial General' Sawdust Blower and Motor. Spare Parts: 100 HP 3 phase electric motor,
several 3 phase smaller electric motors and gearbox for the indeed conveyor. Ready for
shipping on tractor trailer. Weight approximately 10 - 12 tons. $37,500.00 Canadian
$37,500.00
New York
Nova Scotia
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$4,000.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
Oregon
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 7
High production 2-man sawmill mounted in custom designed semi trailer, sawing up to 10
mbf daily in cants: 5-strand green chain w/stop & load, Mobile Dimension Model 128
hydrostatic saw head retrofitted w/remote operator station (10 hydraulic, 3 electric
7211
controls), saws 5.5' diameter x 26' length, heavy duty hydraulic dogs & log turner,
Updated
4-direction (up/down/left/right) taper. Includes automatic slab outfeed w/ sawdust screen, 8
outriggers w/6 ton jacks. 25 HP on saw, 15 HP edger & hydraulics. 800 hours. Best offer.
Will consider trade for quality backhoe.
$49,000.00
Reduced
16047
8-27 Lucas Kohlar Command Gas 27 HP engine. 2004 Model with track extension for 20'
long logs. Tie attachment plus 5 extra blades.
$10,000.00
Virginia
15716
1998 Lucas Model 618, new 18 HP Briggs & Stratton electric start gas engine, totally rebuilt
transaxle to keep blade sawing accurately. Saws up to 20' length. Includes slabbing
attachment, bevel siding attachment and 6 blades with sharpening jig. 1400 hours on the
sawmill. 200 hours on the engine. Can demonstrate. Nearly $21,000.00 new with all the
extras.
$14,000.00
Washington
16302
1989 Mobile Dimension 812 mounted on mobile home frame (needs axel to be towed behind
truck). 57 HP Volkswagen gas engine. Hydrostatic feed control. Includes a 6 and 12 carbide
tooth blade, electric start, extra belts, all instruction manuals. Cash only.
$12,000.00
Washington
16229
Duncan Ironworks 3030 . Hydraulic. 3 phase 50 HP. Capacity 26' length X 8' diameter. Can
cut 12 X 12 in 1 pass. Includes out feed roll case, bits, shanks, grinder.
$24,900.00
Wisconsin
16298
Jacskon Lumber Harvester with 2 headblocks and control cab, computer set works. 54"
blade, 45' track. Hydraulics, 100 HP 3 phase electric motor. Large hydraulic tank (175 gal)
with pump. MAKE OFFER!
$12,000.00
STATE
AD #
Alaska
13853
Salem tie mill, automatic, computer setworks needs to be replaced, portable on dual axle
trailer, 2 headblocks, air dogs need replacing, 12' carriage, operator cab, offbearer belt, no
power.
$30,000.00
Alaska
6591
01C Frick, Helle automatic setworks, Renco 6" vertical edger, Mellott cab w/heat, tapers, 4
headblocks, 15' carriage. 275 HP 671 Detroit power.
$20,000.00
Alberta
9078
2003 Slidetech circular sawmill, hydraulic feed deck, hydraulic controls, log turner, sawdust
blower, 42" headsaw and topsaw, mud saw, onboard saw sharpener, operator controlled saw
guides. 60 HP 3-phase, 480V. Carriage runs on nylon slides. Can saw logs up to 32"
diameter x 21' length. Runs smooth and quiet. Produces smooth finish on lumber.
$47,500.00
British Columbia
13654
Morbark 30" automatic mill, right hand, live infeed deck with stop & load, sawyer's cab, 3
headblocks, rebuilt 16' carriage, two 52" inserted tooth headsaws, Cummins 60 HP diesel
power unit, two 100 HP 600V electric motors and two hydraulic pumps.
$95,000.00
12924
SALEM 42" automatic mill, right hand, all steel, 40,000 lbs., adjustable track, 150 HP
3-phase 575V, Tyrone Berry hydraulic feedworks 100 HP, 2 headblocks, 8' carriage, saw cab
with computer setworks and controls, 56" headsaw, 4-strand live deck with stop & load,
sawdust and wastewood chain with Radicon drive, outfeed conveyor. MORBARK 40"
rosserhead debarker with bucksaw on Fruehauf trailer, 3-strand infeed deck, 4-strand
outfeed transfer rollcase. This debarker was debarking 75,000 bf per shift when taken out of
service. All electrical included along with a variety of conveyors, transfers and decking. Will
separate.
$75,000.00
California (Central)
15359
Morbark MorPack with topsaw and Meadows 2-saw vertical edger, right hand, portable on
factory axle, 20' 4-strand infeed with stop & load, 4 headblocks, 14' carriage, 54" headsaw, 2
extra 36" topsaws, 2 extra edger saws, 150 HP 3-phase on headsaw, 50 HP 3-phase on
topsaw, 50 HP on vertical edger, operator cab, computer setworks, tooth grinder, changing
tools, 1000 extra teeth, 36" x 24' long outfeed rolls with lumber stop and lumber kickers, 30' $325,000.00
sawdust conveyor and 30' barnsweep, 50' 4-strand greenchain, Morbark 56" 3-knife chipper,
20' infeed, top discharge, includes knife grinder and Babbitt pot, 150 HP 3-phase. All
transfers and decking run by hydraulics, powered by 100 HP hydraulic power pack with 100
gal. fuel tank. All electrical and disconnects included.
California (Central)
13465
01 Frick, automatic modular mill, 2-saw vertical edger, 40" topsaw, Mellott chain log turner,
Tyrone Berry feedworks, 3 headblock, 15' carriage, 3 strand infeed deck with stop & load,
sawyer's cab, 60" headsaw, 80' roll case, 4 strand green chain, 200 HP 3-phase power.
$37,500.00
15958
American Lumber 2 sawmill. Has been producing for past 35 years. 20' carriage, 60' track
set up in 20' sections (that can be taken apart), Frame is set up with 8" channel iron frame.
There are 2 48" saw blades: 1 Stahl 3, 8-9 gauge; 1 Stahl B, 8-9 gauge. Cat D4600 power
unit (diesel). Corly 3 saw edger that is powered by case power unit.
$30,000.00
15195
Complete operation: 01-C Frick, automatic, right hand, 3 headblocks, Mellott 24' 4-strand
log deck with stop & load with #5 hydraulic log turner, 3 air dogs, 15' carriage, 213 Tyrone
Berry feedworks, Mellott hydraulic log turner, 52" headsaw, extra carriage for parts, extra
husk frame, extra rollcases, Jockey grinder, Frick 2"x24" 2-saw edger with trailing device,
transfer deck to 16" 2-blade trimsaw, Taylor 30,000 # forklift.
$30,000.00
Tennessee
British Columbia
Colorado
Florida
Circular Sawmills, Automatic
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 8
15840
2012 Turbo SawMill, model# T12-46DA, 46 hp diesel , 250 hours, Computer sizing, 3 blades,
Transport trailer package. Built by Built by Spectrum Innovations by Jake and Carl Peterson
$49,500.00
Illinois
14167
Corinth American, automatic, right hand, designed for long timbers with 36' carriage and
95' track, 6 headblocks, 56" headsaw, sawyer cab, Corinth hydraulic bar-type log turner,
Corinth automatic cable tensioner, 8" collar on the husk, 3 7/16" mandrel, very good
condition, built extra heavy duty with 8x8 tubing frame on the carriage, 200 HP 3-phase
480V.
$40,000.00
Maine
14035
Jackson Lumber Harvester, automatic, right hand, 3-strand live infeed deck with stop & load,
3 headblocks, 12' carriage, hydraulic log turner, 3 blades around 56" each, 100 HP 3-phase
power. Disassembled and ready to transport. Was running fine when removed from service.
$10,000.00
Reduced
Massachusetts
13979
Cardinal automatic sawmill, electric over hydraulic, right hand, 20' 3-strand infeed deck,
hydraulic variable speed feed, hydraulic 12' carriage, 3 headblocks with hydraulic dogs, last
cut down to 2", 52" inserted tooth headsaw, hydraulic 198, 3208 Cat diesel power unit.
$18,500.00
Massachusetts
8719
Sanborn 42" automatic circular sawmill, right hand, all steel, hydraulic shotgun feed, 16'
carriage, 4 headblocks, pantograph, complete topsaw assembly with 30 HP 3-phase motor.
No headsaw or topsaw blades. Some 3-phase motors available. Nearly $200,000.00 new.
$45,000.00
Michigan
15841
Pallet operation: Automatic circular sawmill w/vertical edger, 150 hp electric, 3 headblocks
w/power dogs, 54" saw, log turner, power infeed, 5 blade gang saw 100 hp electric, slab saw,
conveyors.
$5,000.00
Missouri
14481
1995 Helle automatic, right hand, saw cab, feedworks, setworks, and Helle hydraulic log
turner, 2 headblock 12' carriage, 54" headsaw, Frick setworks dial, sawdust blower, Corley
2-strand live infeed deck with stop & load. Everything portable on factory trailer. No power.
$10,000.00
Reduced
13296
1985 Edmiston automatic mill, right hand, 4 headblocks, 4 automatic dogs, 16' carriage, saw
cab, 3-strand 18' log deck, 150 HP 3-phase electric. No blade. Completely factory
refurbished. Includes Morbark 48" 3-knife chipper, horizontal feed, top discharge, 150 HP
3-phase electric. All electrical with starters and wall panel included. Also includes extra
parts and components.
$32,500.00
Hawaii
North Carolina
Ohio
Piper portable automatic sawmill, all steel, heavy duty 12" I beam frame mounted on dual
15536 axle with gooseneck hitch. Quick set up. 13'5" carriage, 3 headblocks, 2 dogs, log deck and
Updated turner. New 250 HP Duetz, hydraulics, fuel tanks; and sawdust blower mounted on tri axle
trailer. Set up for high production.
$47,000.00
Reduced
10226
Frick ST36 automatic sawmill, right hand, Edmiston vertical edger with new 20" blades,
mandrel and collars, saw cab w/controls, Allen Bradley hydraulic setworks, 3 headblocks,
15' carriage, Frick log turner, new mandrel and bearings, 56" headsaw,25' live outfeed rolls,
200 HP 3-phase power, 50 HP hydrostatic drive. All electrical included. Everything in
excellent condition. Also includes two 56" headsaws, hammered for right hand.
$30,750.00
Ontario
13313
Hartzell 45" heavy duty mill modular mill with vertical edger, 30" topsaw, steel frame,
sawyer's cab, live deck with stop & load, 3 headblocks, one movable, Silvatech setworks, 18'
carriage, hydraulic carriage drive, chain log turner, laser lights on headsaw and edger, 52"
headsaw, grinder, live outfeed conveyor, 150 HP 3-phase 575V, includes many extras.
$58,500.00
Ontario
12576
2002 KARA Master with top saw, 16' 3-strand live deck with stop & load, , 5 blades and
Simonds 48" insert tooth saw, complete hammering room.
$55,000.00
12213
Complete sawmill operation: Custom built 48" automatic sawmill with 42" headsaw,42"
topsaw and 3-saw vertical edger, right hand, all steel, 3-strand live infeed deck with stop &
load and forward and reverse, 3-headblocks with air dogs, 14' carriage, metric and standard
dial, dual-direction air drums, live outfeed rolls and lumber decks, sawdust chain leads to
25' barn sweep, 3-phase 480 V, most electrical available. Custom built 24" chop saw, air
feed, foot petal controls, handles up to 8" cants. 12" x 12" single head band resaw with live
feed rollers, air hold downs, no return, 50 HP 3-phase, Morbark hammermill, 16 knives,
handles up to 6" material. Complete electrical room with panels, breakers, etc.
$30,000.00
Pennsylvania
16274
Meadows All Steel Portable Sawmill 40' Bed and Track. 3 Headblock Carriage. Handsets
with Dogs 40" opening with number wheel. 52" Simonds Headsaw Blade - F style. Mellott
Log Turner. Mellott Hydraulic System. 25' 2 Strand Deck. 26" Cornell blower with 10 HP
motor and starter. 4 Cylinder Detroit Power Unit with Rockford Clutch Pak, 50 Gal Fuel
Tank, 1000 hours on overhaul. 40' Dead Rolls. Swing type Cutoff Saw with 30" carbide blade.
7 1/2 HP motor and starter. 24' Firewood Conveyor with 2 HP electric motor and starter. 40'
Track with Lumber Buggy. Mill can be seen operating. This is same as ad #16275.
$22,000.00
Pennsylvania
15771
Model 40 Cleereman automatic, circular saw, 56" saw blade, 215 Tyrone Berry 12 ' carriage
drive , chain log turner, off bearing belt and slide dump, 4 headblocks, diesel power is
available at extra cost.
$17,500.00
Reduced
Ohio
Oregon
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 9
14494
Sawmill operation: 1989 Lane automatic mill with Renco 2-saw vertical edger, right hand,
saw cab, 4 headblocks, 3 dogs, 16' carriage, 56" inserted tooth saw, Lane hydraulic log
turner, 75 KW genset, 16' 3-strand live log deck with stop & load, 20' MELLOTT live roll belt
to MELLOTT slab kicker, 60' 3-strand green chain, MORBARK 58" 6-knife ChipPac with
blowers, 20' vibrating conveyor, 5' shaker screen, and 1998 CAT 3406 diesel motor with
7645 hours. Includes 125 KW genset which powers the sawmill and ChipPac. All electrical
with ROTO PHASE 3-phase converter included. Reasonable offers considered.
$59,000.00
Reduced
14935
Sawmill Operation: 40" CLEREMAN carriage with top saw, automatic, electric over air, right
hand, 40 3-strand log deck with stop & load, 3 headblocks, 16' carriage, sawyer cab, Tyrone
Berry feedworks, two 56" headsaws, 36" top saw, Mellott hydraulic log turner, 36" sawdust
blower, SCHURMAN 6" x 36" combination gang edger/board edger, laser lights, at extra
saws and spacers, infeed and outfeed decks, 36" sawdust blower, 150 HP 3-phase power.
CORNELL automatic 2-saw trimmer, 18" blades, 3-phase power with hydraulic power packs.
MELLOTT 40' vibrating infeed conveyor, 40' 3-strand GREENCHAIN, includes all electrical
with starters. Averaging 15,000 bf grade per shift in 5/4 and 6/4.
$78,000.00
14587
0 Frick with 2-saw 20" vertical edger, automatic, electric over hydraulic powers carriage
and pantograph, wooden operator cab, hydraulic feed, 16' carriage, 4 headblocks, 2 tong
dogs, cant kickers, bar-type log turner, 18' 3-strand log deck with stop & load, 25' offbearer
belt, 290 HP Cummins diesel power, 26" Cornell sawdust blower. Currently opens to 26" due
to cylinder placement. With longer cylinder, can open to the normal 36" opening.
$18,500.00
16077
CMC automatic mill with vertical edger, right hand, saw cab with a/c, 3 headblocks, 14'
carriage, 50" inserted tooth headsaw, includes 12' 4-strand live infeed deck with stop & load,
20' outfeed lumber rollers which leads to 4-strand 10.5'x12' greenchain with 2 HP single
phase motor with reverse switch, 671 Detroit diesel power, CORNELL end-trimmer, 18"
blades, 16' capacity, with 12' continuous-feed infeed chain, 7 HP 3-phase.
$52,500.00
South Carolina
10438
Complete hardwood sawmill: Fulghum 24' rosserhead debarker with live deck and bark
conveyor, #1 Frick, automatic, right hand, all steel, 4 headblocks, air set, 3 air dogs, 20'
carriage, Mellott hydraulic log turner, Berry 213 hydraulic carriage drive with drive
assembly mounted at rear of sawmill, 52" inserted tooth saw, 3 shoulders missing, 125 HP
Westinghouse 3-phase electric motor. Carriage needs some work. Includes 21' 3-strand live
deck, 26" sawdust blower, sawdust conveyor, slab belt. Corley 8" x 60" Combination Gang
Edger with automatic set, two 125 HP motors. Includes extra saws and spacers. Very good
condition. Includes jump chain to edger, 12" infeed rolls, 60" 9' outfeed tailing belt conveyor,
3-strand 9' rooftop chain to trimmer, 19' deadroll conveyor to resaw, 30' slab conveyor,
sawdust conveyor. Includes 3-strand 45' separation deck/green chain, 25' block conveyor,
sawdust conveyor. 48" Precision 3-knife chipper, 75 HP 3-phase. Needs some work. Includes
5' screen and Phelps loading system. All electrical, starters, cables included. Complete set of
transfers, decking and 198. Many extras.
$48,000.00
Reduced
South Carolina
15386
Meadows #2 automatic sawmill, belt feed, 4 headblock 16' carriage with hydraulic controls
and Meadows setworks (elec/hydraulic), 3-strand log deck with stop/load, Meadows log
turner, 36" Meadows Deluxe edger, 3-strand green chain, 48" Fulghum 6-knife chipper, all
crossover decks, conveyors, live rollers, dead rollers, Selling without power.
$28,000.00
15396
FRICK 01-C Timber Tiger automatic sawmill, 213 Tyrone Berry feed, 3 headblock 15'
carriage with Frick setworks, 150 HP 3-phase motor, 3-strand log deck with stop/load,
Mellott log turner, 8" BULL EDGER with 60 HP 3-phase motor and four 24" carbide blades),
6" CORNELL double arbor/double bay gang saw, 100 HP 3-phase top and 100 HP 3-phase
bottom, 4-strand GREEN CHAIN, 48" FULGHUM 6 knife chipper with 150 HP 3-phase motor,
MELLOTT vibrating conveyor, all crossover decks, conveyors, live rollers, dead rollers, All
electrical motors, starters, and panels included.
$38,500.00
Tennessee
16112
This is a great mill for tie or grade lumber production. It is still fully operational. HMC AC40
3-headblock automatic mill with setworks, Tyrone-Berry feed, 150hp 3-phase 480v power,
56” Simonds Circle Saw (3 total saws, all in excellent condition, no shoulder work), HMC 21’
4-strand log deck with stop and load, HMC log turner, Mellot offbearing belt, 28’ outfeed
belt conveyor, husk frame, Mandrel shaft is two-part with flex coupler (Mandrel shaft and
bearings were all replaced 1 year ago), dust chain for edger and head saw.
$45,000.00
Tennessee
15979
Automatic circle mill with 4 headblocks, 16' carriage, HMC, fully automatic, log turner, 3
phase power, drives included
$28,000.00
16198
Windham Automatic Circular Sawmill - Custom Made/353 Detroit/Prentice Hydraulics/3
Stage Pump. All Steel, 2 Headblocks. 11' Carriage, Track is 42' long x 40" wide. Includes:
Hydraulic Feed Works, Hydraulic Log Turner, Hyddraulic Log Deck - 6' wide x 18' long.
Vertical 4 blade edger with 4 F pattern inserted tooth saws/3' wide, cuts 4" thick. 56" F
pattern inserted tooth saw (low hours). 95' dust chain under mill from edger to upright dust
chain - does not include power. 4 sets Roller Beds. 671 Detroit pulls both saw and edger.
$25,000.00
Pennsylvania
Pennsylvania
Pennsylvania
South Carolina
South Carolina
Texas
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 10
16349
New
Custom built sawmill using Frick sawmill as foundation. Built heavy duty. Includes 12 Volt
Hydraulic drive over hydraulic dogs, flippers, and set works. 3 head blocks, 44' track, 3 - 56"
F style blades, 300 HP Cummins diesel engine. Averages 11500 bf per day depending on
conditions.
$16,700.00
Wisconsin
3327
Wendt circular sawmill, mid 90's. electric over hydraulic, 4 presets, dual controls, 48"
headsaw, clearance for 56" saw, 4 headblocks-3 live, 31" opening, 12' carriage, 44' track,
live deck w/stop&load, chain type log turner, sawdust chain, no power. Sawed less than
10,000 ft. Always under cover.
$19,900.00
STATE
AD #
Circular Sawmills, Complete Operation
PRICE (U.S.)
British Columbia
15414
Complete sawmill operation: Automatic circular mill with topsaw and saw cab, right hand, 3
headblock 14’ carriage, Salem setworks, dogs, and carriage drive, 50’ track and frame,
Sawyers open cab, 56" inserted tooth headsaw, 28" topsaw, 150 HP Allis Chalmers 480v
motor, 4-strand log deck, log turner, 5 strand 13ft x 20ft transfer deck to 8" combination
gang- edger with hydraulic setworks, Balder Super ‘E’ 200 HP 575v motor, 23" trim/hula
saw 7.5hp 460v, 4 strand 70’ x 14’ greenchain. Brunette 48" 6 knife chipper 100HP 480v
motor. All electrical included along with a variety of clean out chains and waste conveyors,
transfers and decking.
$50,000.00
Reduced
Canada
15961
Circle sawmill with manual carriage 30" X 12', 48" headrig. Edger 2" - 12" wide, powered by
300 HP Mac engine (diesel). Band resaw. Building 20' wide X 60' length includes all
lighting/electrical.
$28,900.00
11906
Sawmill operation: EDMISTON 40" automatic mill, portable, right hand, 4 headblock 16'
carriage, hammer dog, hydraulic setworks, dogs, and carriage drive, 60'+ track frame,
Sawyer's cab, husk frame with 54" inserted tooth blade, 25' 3-strand live log deck to mill
with stop-n-loader, Edmiston Log turner, sawdust chain; 40' main mill roll-case, chain
transfer to VANCE 8" x 40" combination gang-edger with hydraulic setworks, 30' 4-strand
lumber deck with rooftop chain, 35' 4-strand green chain, 30' Roll-case at end of green chain,
50' slab conveyor belt. CAT 400 HP Diesel power units runs the sawmill and edger.
MORBARK 640 rosserhead debarker with 25' 4-stand live infeed deck and extra long (36')
out-feed. MORBARK 48" ChipPak with screen, 15HP electric motor and blower, waste
conveyors, motor control center. Includes electrical disconnects and starters. Everything in
very good condition.
$90,000.00
WIsconsin
Louisiana
Maine
Ontario
Pennsylvania
Complete operating sawmill, Lane #1, right hand, Glover feedworks, 5 headblocks, 21’
carriage, foot receder, 48" inserted tooth headsaw, sawdust blower. Frick 4"x22" 2-saw
edger, both powered by 471 Detroit diesel engine, 20" trim saw, handles material 8" width
14066
and 3" depth, 3-phase power. 3 HP industrial shaper with knives for making raised panel
Updated
doors, T&G of 1/2" and 3/8", $300 in knives included. Includes many spare parts, numerous
V-belts, bearings, and sprockets. Everything in fine working condition. Want everything off
the property. Reduced for quick sale.
$20,000.00
Reduced
13920
Sawmill operation: MORBARK rosserhead debarker with 3-strand 24' log deck, debarker
handles logs 6" to 40" diameter, carbide cutter head, 50 HP on the headsaw and 25 HP runs
hydraulics, 60' outfeed bark conveyor, log kicker to live outfeed conveyor to HELLE
automatic mill, right hand, push-button electric setworks, saw cab, 3 headblocks, 12'
carriage, hydraulic log turner, several sawblades 54" to 56", live outfeed conveyor, cants to
$250,000.00
100' of green chain, boards to 6" BULL EDGER, using 2 to 7 blades, 40 HP 3-phase, slabs
removed from outfeed conveyor by kicker to FULGHUM 48"whole log 6-knife chipper, 75 HP
3-phase 460v, 10 HP air compressor. PATZ barnsweep 100' sawdust conveyor. 10,000 to
15,000 bf daily production. All electrical included with electrical panels.
16275
Meadows All Steel Portable Sawmill 40' Bed and Track. 3 Headblock Carriage. Handsets
with Dogs 40" opening with number wheel. 52" Simonds Headsaw Blade - F style. Mellott
Log Turner. Mellott Hydraulic System. 25' 2 Strand Deck. 26" Cornell blower with 10 HP
motor and starter. 4 Cylinder Detroit Power Unit with Rockford Clutch Pak, 50 Gal Fuel
Tank, 1000 hours on overhaul. 40' Dead Rolls. Swing type Cutoff Saw with 30" carbide blade.
7 1/2 HP motor and starter. 24' Firewood Conveyor with 2 HP electric motor and starter. 40'
Track with Lumber Buggy. Mill can be seen operating. This same as ad#16274.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$22,000.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
South Carolina
16165
STATE
AD #
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 11
Hurdle Sawmill with many labor saving devices. The mill has not been run in over 5 years. It
is mostly steel. It has live decks, air compressors, 54' FH head saw, bark conveyers, sawdust
chain, slab conveyers, belts and all electric switch boxes and wire. Mill is on wheels and can
be pulled. Deck is 3 strand and 44' long and is on wheels and can be pulled. Power House is
on wheels. - All Steel Log Deck, 34' long x 12' wide, H 178 Chain with Stop and Loader Gardner Denver Air Compressor, 200 PSI, 3 Phase - 620 Fulghum Rosser Head Debarker,
Cap 20' log, Motors, Gear Box, Starters, Switches - 17' Cornell Log Deck, 878 Chain, Heavy
Duty Hurdle Chain Type Log Turner with all gear boxes, drives, and switches - Carenth
$117,500.00
AL36, 3 Headblocks, 13' Long, 3 Sets Trucks, Hydraulic Set Works - 213 Hydraulic Feed
with Air Compressor, Pulls off of Mandrell - 3 Deck-in-one, 44' Long, 12' Wide, 5th Pin Gear
Boxes, Motors/Switches/Starters, All Attached. 120 Roller Chain, Deck 1 & 2, H130 Roof Top
Chain - Miner Edger 230 with 30 HP Motor, Starters, Switches, Tailing Device - Power
Supply House for all of mill with inlets - Morbark 58", 3 Knife Chipper, Horizontal Feed, Top
Discharge, 125 HP Electric Motor, Starter/Switches/Gears, 6 x 6 Fulgum Chip Screen and
Cyclone with motors, starters, switches - Chip Loading System
Circular Sawmills, Handset
PRICE (U.S.)
Alabama
14198
395 Corley, handset, right hand, all new wood, 3 headblocks, 12' carriage, includes two 52"
insert tooth headsaws, upgraded to newer bearings, all steel 2x16" 3-saw edger, everything
run by 371 Detroit diesel power with V-belt pulleys, 1900 hours on the power unit. Includes
enough extra parts and components to build a second sawmill.
Arizona
11006
Foley-Belsaw, 2 headblocks, 10' carriage, 40" inserted tooth saw, 4-cylinder Wisconsin gas
engine.
$2,500.00
8118
Customized circular sawmill, right, hand, handset, heavy steel beam construction w/zigzag
bracing, 3 headblocks, 14' carriage with 36" opening, two hydraulic log turners, foot receder,
hydraulic outfeed rollcase, live slab belt, 335 Cummins diesel power, accepts 42"-50"
headsaws. Producing at least 10,000 bf daily, more with a larger crew. Designed to never
get out of alignment. Transportable by skid winch to lowboy.
$12,000.00
Reduced
California (North)
14871
American #1, all steel, right hand, handset, 2 headblocks, 16' carriage, 52" headsaw,
8-cylinder Chrysler industrial gas engine, 110' of roller conveyors, sawdust conveyor.
Includes Belsaw gang ripsaw, air operated cutoff saw, and sawdust blower. Also includes
Clark forklift, not running.
$7,900.00
Georgia
16148
00 Frick Circular Handset Sawmill: Right hand, Steel husk, frame, and carriage, Track
needs to be restocked, 16' Carriage, Capacity is 36" diameter X 16' length, 56" Saw, 2 sets
of 10' long roller beds, 371 Detroit Diesel with extra engine/block assembly
$3,500.00
Illinois
16282
Meadows #1 with choice of 2 headblock, 3 headblock, or 4 headblock carriage. All steel.
Right hand mill. 56" head saw. Belt driven vertical edger. Hydraulic. New hoses. Includes
log turner, log deck, live out feed rollers. Cut logs 18' length. No power.
$17,000.00
Illinois
14197
Circular sawmill, right hand, handset, wood husk and track frame, 52" inserted tooth
headsaws, 3 headblocks, 14' carriage, 671 Detroit power with V-belt drive. Can see running.
$5,000.00
Illinois
14964
TimberKing M-14, 3 headblocks, 10' carriage, powered by Jeep 258 6-cylinder gas engine
with automatic clutch and throttle
$4,000.00
Indiana
8740
Enterprise circular sawmill, completely rebuilt, handset, left hand, 3 headblocks, 16'
carriage, 56" and 54" headsaws. Includes belts, pulleys, extra teeth, grinder, extra I-beams
and parts, 50 HP 3-phase power.
$4,000.00
Kentucky
15976
#2 Meadows with air dogs and air receder, belt drive for carriage, 15' carriage, 4
headblocks, no power
$5,000.00
Kentucky
15977
215 Tyrone Berry carriage drive for end of track for cable drum. This was bought at auction
for parts but never used. Additional parts can be bought from Corley.
$3,300.00
Maryland
12861
Foley-Belsaw, 2 headblocks, 10' carriage, 48" inserted tooth saw, PTO attachment.
$2,000.00
Maryland
11273
American #1, portable on single axle trailer, right hand, handset, 3 headblocks, 10' carriage
and husk, everything on reinforced double all steel frame I-beam and tubing, 54" and 48"
headsaws, 2-strand 12' gravity infeed deck, 20' of live outfeed rollers built on the mill,
sawdust blower, 671 Detroit power on lineshaft off Diamond Rio truck, hand filer, extra
teeth, tooth changing tools. Includes Frick 4"x24" 2-saw edger. Can see in operation. Will
sell for $6,000.00 for the sawmill and edger without power. Producing 100 ties per shift.
$8,000.00
Michigan
15843
Port Huron manual sawmill with 2 headblocks.
Michigan
15842
Frick manual sawmill with 4 headblocks, cable feedworks. Handles logs 4' diameter and 30'
long.
$2,500.00
15254
#1 Meadows, right hand, handset, portable on factory axle, 3 headblocks, 12 ' carriage, 54"
headsaw, extra headsaw, rebuilt sawdust blower with piping, endless feed belts, 120 HP
John Deere diesel engine with newer clutch, easy starting, never use starting fluid in cold
weather, has Murphy switch. Husk main frame in good condition. Carriage is worn but does
work.
$15,500.00
British Columbia
Michigan
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$7,000.00
Reduced
$400.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 12
New Hampshire
14932
1996 LaneTech #0-30, all steel, handset, right hand, 2 headblocks, 10' carriage, Glover
feedworks, foot receder, two sawdust blower, 48" inserted tooth headsaw, excellent
condition. Everything powered by 100 HP 3-phase power unit.
$6,500.00
New Hampshire
13000
Lane circular sawmill, right hand, topsaw, steel husk frame, 16" wood carriage, 3
headblocks, two 52" hardwood and softwood blades, 2 sawdust blowers, transfers and
decking, Lane 2"x18" 2-saw edger, Cat D8800 Cat power unit with Pony motor.
Disassembled and ready for shipping.
$11,500.00
New Jersey
2168
American #2 circular sawmill, right hand, handset, portable on 40' flatbed trailer, 3
headblocks, 12' carriage, two 48" headsaws, Ford V-8 330 gas engine.
$4,500.00
New York
15813
TimberKing M-14, "brand new in the crate". Never assembled. Complete with 2 headblocks,
10' carriage, 30' track, 40" inserted tooth blade, all manuals and repair guides. Serious
offers considered.
$3,000.00
New York
6229
Lane #2, LH, log turner, Glover carriage feed, cast iron husk, 7 HB, 4 dogs plus Sawyer's
Favorite, 18' carriage, 52" saw, 40" topsaw, extra saws, 13000 Cat, Lane 4x36 2 saw edger,
overhead rosser, 16' end trim, sawdust blower.
$12,500.00
New York
15003
Lane #1, wood in fair condition on husk, Babbitt bearings in good condition, includes
setworks, track and rollers, 12" flat belt pulley, 4 headblocks, 3 tapers. No carriage, blade or
power.
$1,150.00
North Carolina
1947
1939 440 Corley, handset, all steel, 4 headblocks, 12' carriage, two 56" headsaws, Mellott
chain type log turner, all new roller bearings, International UD-16 diesel engine. Offers
considered.
$6,000.00
Ohio
16204
Enterprise Model 21. Handset - Right Hand, 2 Man Mill. 16' Wood Carriage and Wood Husk
(original). 3 Headblocks. Flat belt drive. Cuts logs 22' long. Has babbit bearings. No power.
$5,000.00
Ohio
15833
Portable 01 Frick Sawmill. All steel with 3 headblock 16 ' carriage. Right hand. 42 insert
tooth blade and extra teeth. 1 Jockey and 1 homemade grinder. Also extra bearing for
mandrel and some other extras. Everything is in fair condition.
$10,000.00
Ohio
15669
00 Frick, handset, right hand, portable on truck wheels,3-headblocks, 12' carriage, wooden
carriage frame, 54" headsaw, half-moon log turner, foot receder, sawdust blower with some
piping, live outfeed conveyor, five v-belts, 471 Detroit power unit, 250 gal. fuel tank.
$22,000.00
Ohio
13700
Enterprise circular sawmill, mostly wood frame, right hand, handset, 3 headblocks, 15'
carriage, 50" headsaw. No power.
$2,500.00
14603
American #1, all steel, handset, right hand, portable on 4-wheel axle, 3 headblocks, 14'
American #1 carriage, two 8' track extensions for 47' of track, updated to all newer
bearings, some extra components and parts, 52", 56", two 60" inserted tooth headsaws.
Sprockets and gearbox already installed if you want to add an outfeed conveyor. 671 GMC
diesel power with Rockford clutch, runs fine.
$9,500.00
Reduced
Oregon
Pennsylvania
1920's 00 Frick, handset, right hand, wood husk, new wood on carriage and track, 3
headblocks, 15' carriage, 48" and 52" inserted tooth headsaws with hand grinder and swage
15463 and insert tools, sawdust blower, 5' and 10' roller beds Includes 4"x27" Frick 2-saw edger,
Updated needs some work. Everything powered by 230 Cummins diesel power, 220 HP, still in truck
frame with transmission, short drive shaft, and 250 gallon oil tank. Also includes 7000 lb log
trailer 21' long X 6'-2" wide.
$11,900.00
Pennsylvania
15024
Foley-Belsaw M-14, 2 headblocks, 10' carriage, 40" inserted tooth headsaw, includes Belsaw
tooth grinder and PTO attachment.
$2,250.00
Pennsylvania
14189
Foley-Belsaw, 2 headblocks, 10' carriage, 40" insert tooth headsaw, PTO attachment
included.
$2,500.00
Saskatchewan
7995
Watrus, LH, handset, all steel, 3 headblock, 15' carriage, two 50" headsaws, 36" topsaw, 29'
live outfeed belt, sawdust blower, grinder. Coutts 4"x36" gang edger. All hydraulic and belt
driven by 871 Detroit. Also includes 2 trim saws and misc. parts.
$22,000.00
Tennessee
16323
New
Foley-Belsaw, all steel with 40" inserted tooth saw, 2 headblocks, 30' carriage, PTO powered,
kept under cover. Good condition.
$2,500.00
Tennessee
11073
00 Frick, handset, right hand, 4 headblocks, 20' steel carriage, wood husk, 52" and 56"
headsaws, hydraulic log turner, tooth changing tools and accessories, 2 fuel tanks, outfeed
conveyor, air compressor, cant hook, 180 Cummins diesel power.
$8,500.00
Virginia
10052
0 Frick, right hand, wood husk and carriage frame, 4 headblocks, 16' carriage, 50" headsaw,
471 Detroit power on wheels, 1102 hours, live outfeed conveyor.
$12,000.00
00 Frick with 3 headlocks, metal track, wood saw box and wood carriage. Sawdust blower,
16250 Log turner. 14' Carriage. 52" and 54" blade. Capacity is 16' X 24". Has rollers off of saw box.
Updated Front of mill is reinforced with metal. Power-Deutz 6 cylinder 230 HP diesel in good
condition.
$7,500.00
West Virginia
Wisconsin
16157
Frick right hand handset, 3 headblocks, no power, steel frame, 14' carriage, capacity is 25"
x 20', has 1 new 52" blade and 1 used 54" blade. No hydraulics or electric.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$7,000.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 13
STATE
AD #
Air Compressors
Georgia
16147
Air Compressor: 5 HP 3 phase electric 80 Gallon Vertical Tank
$550.00
Georgia
16146
Air Compressor: 11 HP Briggs & Stratton gas engine Electric Start 30 Gal tank
$500.00
Indiana
16219
15 HP Ingersol Rand Air Compressor, belt drive. Very good condition.
$1,600.00
Kentucky
15852
Ingersoll-Rand 30 hp air compressor, electric, 3 phase power.
$2,000.00
Reduced
Missouri
15522
Ingersoll-Rand 5 ton air hoist with trolley
$2,500.00
Missouri
15523
Sullivan D185Q6JD screw-type air compressor, 4-cylinder John Deere diesel power.
$6,500.00
Pennsylvania
16350
New
Gardner Denver Model EDE99MM. Complete unit with Auto Sentry RS2000 Airpilot
Controller.
$3,500.00
South Carolina
15387
Sullair LS-12 air compressor, 50 HP 3-phase
STATE
AD #
Mississippi
16338
New
Bucket with opening of 48" X 94".
$2,200.00
Mississippi
16337
New
Forks that are 4'6" long, made for a grapple attachment.
$5,000.00
South Carolina
16174
AMEC Directional Tree Cutter. ST%-26, 84-26-005. Can be used on most Loaders.
$3,000.00
Washington
16195
1992 UNIMOG Implements off of a Freightliner/Mercedes/Unimog. Only 1105 miles. For
sale as a Unit or by the piece: Case Back Hoe Attachment, Bucket Loader These are nearly
new condition. Also all Hydraulics: tanks, cooler, hose reel, chain saw, 2 - jack hammers,
$5,500.00
STATE
AD #
Kentucky
15236
The Machine Shop Model 200 shavings baler/bagger, produces 12"x16"x30" bales, some
bags included. Power not included.
$3,500.00
Pennsylvania
15370
2010 Real Tuff shavings baler with control unit, automatic with 36 HP Yanmar diesel power.
Includes Forage box type feeder ( approx 20 yd ) with conveyor. Excellent condition. Price
firm.
$20,000.00
Reduced
Utah
15659
Shavings baler, vertical feed, bag size 16" x 12". Includes several thousand bags.
$5,500.00
Reduced
Utah
15513
Custom built shavings baler, vertical infeed chute, 3-phase power
$5,500.00
Reduced
STATE
AD #
Attachments
Baggers/Balers
Banding/Strapping
PRICE (U.S.)
$4,800.00
PRICE (U.S.)
PRICE (U.S.)
PRICE (U.S.)
British Columbia
15373
StrapPak strapping machine, 110V, cutting and heat seal option, includes strapping table
and stops at 2 meters, 3 meters, and 4 meters. Needs some work.
$1,000.00
Reduced
Missouri
14424
Strapak JK-2 banding machine, 110V, adjustable tension, 1/2 roll of nylon strapping included.
$800.00
STATE
AD #
Bands
PRICE (U.S.)
Arkansas
11307
International Knife & Saw wide bands, two new 10" x 32'5", 15-gauge, 1 3/4" tooth spacing,
and three 11" x 47', 1 3/4" tooth spacing
Kentucky
15978
7" X 12" metal band saw comes with power.
STATE
AD #
Blades
PRICE (U.S.)
Nebraska
16065
Foley Belsaw blade and shaft: 46" blade, needs new teeth. Drive shaft, mounting plates that
hold bearings can go with shaft. Will separate drive shaft/mounting plates for $75.00.
$525.00
South Carolina
16166
489 Saw Blades: Carbide scroll saws, some thin left, some corley edgers, some cooks edgers,
Frick gang edgers, Busbee gang edgers, Assortment spacers for each gang
$4,500.00
STATE
AD #
Boilers
PRICE (U.S.)
Oregon
15935
1999 Cleaver Brooks CB package boiler, CEW200600, Pressure: 15 PSI, 197.5 PGH oil ,
input 25,106,000 TBTU, S/N 0L099000 with pump
Pennsylvania
15486
Peerless cast iron boiler with Becket commercial burner
STATE
AD #
Massachusetts
16322
New
W78 Transfer Chain : 12' long 4 strand W78 transfer chain
120 ' live sawdust chain
Ohio
15580
STATE
AD #
South Carolina
15844
STATE
AD #
Chain
$2,100.00
$1,000.00
$25,000.00
$2,500.00
PRICE (U.S.)
$1,100.00
$1,500.00
Chip Vans
1999 ITE chip van, similar to Peerless, open top, new tires, around 42' length.
Chippers and ChipPacs
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
$16,000.00
PRICE (U.S.)
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 14
Alabama
9869
Bush 3-knife chipper w/shaker and vibrating conveyor, extra knives, 671 Detroit power.
Includes grinder in excellent condition.
$10,000.00
Arkansas
11297
48" CME 8-knife chipper, HFBD, 75 HP motor and starter
$5,000.00
British Columbia
16090
Re-conditioned 54" 6 knife Forano chipper
$8,000.00
British Columbia
16092
Re-conditioned 66" Forano 6 knife chipper
$15,000.00
British Columbia
16091
Re-conditioned 62 " CAE 6 knife chipper
$18,000.00
Kentucky
7356
Morbark 48" chipper. SFBD. 480 v 3--Phase. Not in operation.
$10,000.00
Michigan
15311
3-knife brush chipper, 65 HP Perkins diesel engine, 1800 hours.
$4,800.00
New York
13972
Asplundh brush chipper on factory axle, horizontal feed top discharge, 300 series Ford gas
engine, chips up to 9" material. Damaged. Needs work.
$2,500.00
Pennsylvania
15616
Morbark 58" 6-knife ChipPac with blowers, 20' vibrating conveyor, 5' shaker screen. No
power.
$9,500.00
Reduced
Pennsylvania
15987
Portable Slab Wood Chipper with 4 cylinder 85 HP Ford diesel engine
$7,200.00
Pennsylvania
15903
Brushband Chipper model 100, Cummins 4 cylinder diesel engine
$11,000.00
South Carolina
16177
60" Fulgum Chipper, Horizontal Feed, Top Discharge
$4,500.00
South Carolina
14869
1997 Morbark Model 2400 36" chipper on factory axle, 108 hours, H&A 18" swing-in cutoff
saw, 5 single-phase.
$19,500.00
South Carolina
12747
Valby 48" combination 3-knife chipper and hammermill, PTO drive, includes 1 spare set of
knives. Original owner. Used less than 10 hours. Designed to produce animal bedding,
mulch, etc.
$7,500.00
Tennessee
16280
48" Precision Chip Pack Tub Grinder with extra accessories.
$7,000.00
Virginia
16161
CM & E 48" Chipper, 8 knives with Detroit diesel V6 power unit. Horizontal feed with top
discharge. Extra knives.
$9,000.00
Virginia
15607
Bush ChipMaster, 48" 6-knife, top discharge, all new wear parts, two new sets of knives,
includes Rex Carrier 25' vibrating conveyor with transition chute. Chipper is in use daily.
Seller will negotiate.
$13,500.00
Reduced
Wisconsin
16300
48" Morbark 3 knife chipper. No power. Has screen to sort chips. Has chip blower.
$5,200.00
STATE
AD #
Tennessee
15924
Chippers, Hogs, Mulch Manufacturing
Morbark Whole Tree Chipper 400 Cummins engine Model 22 Serial Number 1507 6158.3
hours
$75,000.00
STATE
AD #
Alabama
13789
Hazelthorn 20" chop saw with pneumatic controls. 20 HP 3-phase, air hold-down, air stops.
Indiana
15168
Popup chop saw, hydraulic motor and air lift cylinder, 20" blade, cuts up to 4" material
$1,000.00
Kentucky
15210
Cutoff saw, swing down, 18" blade, 15 HP 3-phase 220/440, 8' infeed and 8' outfeed rollers,
manual stops.
$2,000.00
Reduced
Kentucky
15830
Whirlwind chopsaw with hydraulic infeed and outfeed
$2,600.00
Kentucky
15825
Custom made chop saw similar to Morgan
$2,000.00
Kentucky
15332
Custom built pull down cutoff saw, heavy build, 20" carbide blade, 6' infeed, 6' outfeed, no
power.
$2,000.00
Kentucky
15211
Cutoff saw, swing down, 15 HP 3-phase 220/440, infeed rollers, no blade.
$2,000.00
Michigan
16049
Grutter popup air saw 12'' wide capacity with rollers on 1 side
$1,200.00
New York
14106
Whirlwind WW212R upcut saw with blades and stops, 3-phase power.
$2,300.00
Ohio
Chop Saws/Cutoff saws
PRICE (U.S.)
PRICE (U.S.)
$780.00
Complete Precut Setup. 4 Strand 10' Greenchain, Unscrambler, Heavy Duty Chopsaw with
Hydraulic Infeed and Outfeed with Air Stops. Single Head Baker Resaw with Complete Run
16272
Around including Automatic Infeed, sizer and deduster. Everything runs with Hydraulic or
Updated
Air. 4 Cylinder 140 HP John Deere Power Unit with 8100 hours. Also includes Blower with a
10' high stand and all the duct work. Hydraulic pumps, tank and line shaft included.
$42,500.00
Pennsylvania
15713
Cutoff swing-out saw mounted on 7' wide x 14' long x 7' high frame, 30" blade and extra 30"
blade, built live oufeed slab/sawdust conveyor. No power. Set up for electrical, but not hard
to switch to lineshaft or power unit.
$2,000.00
Pennsylvania
16141
Manual Pull-Down Chop Saw with 16' live roll infeed and 19' live roll out feed
$16,000.00
South Carolina
16078
H & A 18" swing-in cut off saw, 5 HP single phase power.
$2,000.00
South Carolina
15389
Kent 22" automatic chop saw with 15' infeed deck with unscrambler, hydraulic
infeed/outfeed, cant holdover and two pneumatic stops, 15 HP 3-phase, electrical included.
$12,500.00
South Carolina
15394
Cornell 22" automatic chop saw hydraulic infeed/outfeed,15 HP 3-phase.
$2,500.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 15
Washington
15495
Kent pull down chop saw, two 24" blades, 7"x 9" capacity, 5' infeed and 10' outfeed rollers,
10 HP 3-phase. Includes Kent waste conveyor, single phase power and 2 yard sawdust
hopper.
$5,000.00
Wisconsin
16301
Brewer Golden Eagle Cut Off Saw. Hydraulic. No power but set up for electric engine with
hydraulic hod downs and feed tools (18" long). 10' Drive rolls on each side with kickback. 4
stops. 16' in feed, 10' out feed
$3,500.00
STATE
AD #
Conveyors
PRICE (U.S.)
Alabama
9873
100' bark conveyor with trough, 5 HP 3-phase power.
$7,500.00
Indiana
15606
36' log trough, hydraulic drive, includes gear box and hydraulic motor.
$2,500.00
Kentucky
16241
Belt Conveyor approx 30 feet.
$800.00
Kentucky
16240
Belt Conveyor approx 60 feet.
$1,000.00
Kentucky
16236
Magnetic conveyer. 30" Crossbelt Magnetic Separator with Small Conveyor.
$5,200.00
Kentucky
16238
Conveyor - 60' conveyor for loading walking floor trailers.
$8,200.00
Kentucky
16237
Magnetic Conveyor. 20 Foot Conveyor with Magnetic End Roller 22" wide.
$2,000.00
Kentucky
15214
Live conveyor with gear box, 18" x 20' length, 3-phase power.
$2,000.00
13417
Live belt conveyor, 67' length x 3' width, 2 HP 3-phase power, adjustable truck loading
system raises up to 15' height. Great for use as sawdust conveyor.
$8,500.00
Maine
Missouri
16289 Belt Conveyor, good condition, 26’x10”, US Electrical Syncrogear Motor. Conveyor made of
Updated stainless steel.
$2,275.00
Missouri
16288 Incline Belt Conveyor, good condition, 8.5’x18” and 4’ high, Leeson Motor. Conveyor made
Updated of stainless steel.
$1,475.00
Pennsylvania
16140
Waste Conveyor
$2,500.00
Virginia
16258
25 ft morbark heavy duty v conveyer
$2,500.00
STATE
AD #
Kentucky
16156
STATE
AD #
Cutstock Manufacturing
Complete Operation: Complete Pallet Cutstock Setup with Bolter Mill with insert tooth
blades and log deck. All with Hydrostatic Drive. Shop Built Double End Trim Saw with 1
moveable blade. Morgan Resaw, 2 Head with Return. Line Shaft Ready, includes electric
motors. Single Head Notcher, Line Shaft Ready or electric..
Cyclones
British Columbia
15704
Sawdust blower with 5’ diameter 8’ cyclone with stand and 60’ of 6" flexible sawdust
ducting
Pennsylvania
16109
Cyclone blower system 40 hp elec
STATE
AD #
Debarkers
PRICE (U.S.)
$32,000.00
PRICE (U.S.)
$3,500.00
$25,000.00
PRICE (U.S.)
British Columbia
12925
Morbark 40" rosserhead debarker with bucksaw on Fruehauf trailer, 3-strand infeed deck,
4-strand outfeed transfer rollcase. Was debarking 75,000 bf per shift when taken out of
service. Includes electrical, transfers and decking.
Georgia
15755
Valley rosserhead debarker with extra head, complete hydraulic power source with power
pack, operator cab. Infeed and outfeed not included. Power not included.
$12,500.00
Indiana
16154
Morbark 632 Debarker, Electric 3 phase, 240 or 480 V, Capacity 6” to 32”, Infeed deck,
Trough Conveyor
$15,000.00
Maine
12567
Morbark W-4 rosserhead debarker, infeed rolls, 3 extra debarking heads. Selling without
power.
$1,750.00
Michigan
16056
Log Debarker: 25HP electric on head, 10HP hydraulic for head travel, log turners, and S&W
16` x 6` log deck w/stop and load,. Also has a bark drag with 2 hp 220v single phase. Head
up and down is air. The Debarker and Log Deck are sold together as the hydraulics from the
Debarker runs the Log Deck. Equipment is in Fair condition.
$11,000.00
North Carolina
11127
HMC V216H rosserhead debarker, slant track, 25 HP 3-phase. Includes 18' 3-strand live log
deck, hydraulic power
$11,000.00
Nova Scotia
12083
Forano 30" Cambio ring debarker with Cambio 50 HP hydraulic infeed and 20 HP outfeed.
Includes all electrical and motors. Excellent condition. Can see in operation.
$25,500.00
South Carolina
16167
Bark Machine and 2 big pallets of bark
$2,000.00
Tennessee
14293
Morbark EM-16 rosserhead debarker, 20' hourglass infeed and outfeed rolls, 75 HP drive
motor, includes 30' incline outfeed conveyor, extra feed rollers, structural steel. Now also
includes $2,000.00 worth of extra 24" feed rollers
$11,000.00
Virginia
16254
HMC Debarker
$10,500.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$19,500.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
Virginia
14730
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 16
Custom built debarker, 8" blade mounted on pivoting arm, designed as either stand-alone
system or sawmill mounted, v-belt driven by a 3 Ph motor on top, includes concrete
counterweight that keeps it from sawing down into the log if mounted on the sawmill.
STATE
AD #
Kentucky
16287
Deck 4' X 16'. Includes gear box and 3 phase electric motor.
Decks, Conveyors, Transfers
$1,000.00
PRICE (U.S.)
$2,000.00
Kentucky
15829
Live deck
Massachusetts
16313
18' long 4 Strand infeed deck with 81x chain
$1,375.00
Michigan
16055
Heavy duty Log Deck 20` x 76`` main beams 4" x 8" tube steel 3ph 7.5 hp
$3,000.00
Wisconsin
16295
14' 2 strand log deck, heavy built with I beam. No stop/load.
$1,800.00
Wisconsin
16294
27' Log deck, 2 strand, I beams (22" tall). Shop built stop & load with log turner. Electric
drive.
$2,800.00
Wisconsin
16293
21' Log Deck, 2 strand with roof top. Electric power, single phase. Good running condition.
$2,300.00
STATE
AD #
Massachusetts
$800.00
Dip Tanks
Chemical Dip Tank with: 6' x 6' x 20' tank - 4" channel and 11 gauge construction. 5 HP
16310 hydraulic power pack with valves, hoses and starter 16,000 lb. capacity lift Hydraulic top
Updated clamp to hold down packages Interior painted with coal tar epoxy Exterior painted with
Rustoleum Machine Enamel With remote control operation
South Carolina
16079
STATE
AD #
Iowa
15974
STATE
AD #
Dip Tank, 5' wide, 43" deep, 20' length. Only tank and no hydraulics.
Doziers
1974 Fiat Allis Dozier, about 12000 hrs. No bucket/only a blade. 140 HP.
Dry Kilns
PRICE (U.S.)
$9,900.00
$6,000.00
PRICE (U.S.)
$17,900.00
PRICE (U.S.)
9073
Two Porta-Kiln ICS portable dry kilns, 8,500 bf in 4/4, 12,000 bf in 8/4, complete with
natural gas 1,000,000 btu boiler, Porta-Kiln ICS controller, power vents, vent heat
recovery/recapture unit, complete infeed/outfeed track sets, corrosion resistant insulated
aluminum liner, stainless steel floor, lumber carts, 600V 3-phase (can be changed).
$47,500.00
Arkansas
11309
Irvington-Moore dry kiln components for 70' x 34' package kiln (approximately 80,000 bf
capacity). Complete except for building. Includes controls, nine 6' diameter fans, 30 HP
motor, heating coils, 8 ventilators, 4 aluminum doors and carriers, ceiling baffles, piping,
steam traps, electrical controls.
$16,000.00
Georgia
15620
Nyle L1200, 10,000 bf capacity in pine, 35,000 b f capacity in oak, 15 HP 3-phase power,
new compressor, 4 fans 2 HP each,
$21,000.00
Illinois
10030
Ebac LD-3000 mounted in Supreme 12' insulated truck box w/vertical rear door entry, dries
up to 3000 bf of lumber up to 11.5' length, freestanding but can be transported easily. The
doors,sides,roof and part of the front wall are insulated. Most of the fasteners are stainless
steel. Each circulating fan is fused on a separate circut. Once the wood is dried,a fan can be
unplugged and a dehumidfier can be plugged in to maintain the finished moisture level
without excessive costs. Truck box purchased new and only used for the kiln. All wiring and
electrical in place. Controls out of direct weather. Only run 9 charges. Always under roof.
Ready to run. Delivery to your site is possible.
$6,100.00
Indiana
16187
2 - Nyle L2500 Kiln Units (for parts), includes 1 Carlyle Compressor 10 - 36" 5 HP 3 Phase
Fans 1 - 24'9" x 14' Aluminum Front Load Kiln Load Door with Carrier 2 - 24' x 72"
Aluminum Service Doors 4 - 20" x 20" vents with electric actuators
$9,500.00
Kansas
16340
New
Nyle L500 Dry Kiln. Manufactured date 2006-07. Single phase 220 V, 100 amp. Has 5 fans
and 2 vents, dry bulb and wet bulb. Drying capacity is 12000 bf per load for hardwood.
Energy efficient - costs about $.03 a bf to dry. Includes a new drying oven and an electronic
scale valued at $700.
$13,500.00
Louisiana
16251
Wood-Mizer V2000 Vacuum Kiln. Capacity:2000 bd ft complete with extra blankets.
$6,500.00
Maryland
10620
Dry kiln components: PC Specialty kiln controller with 7 day chart recorder, RH Sensor and
temp probe, high pressure pump, two 3-way valves, Delmhorst J-2000 with hammer probe
and case, Blue M lab oven, one gallon can of BOSS used to oven dry kiln samples, Tube and
shell heat exchanger (300K BTU). Serious offers considered.
$3,995.00
Reduced
Michigan
14196
Nyle L-50 mounted in 8' X 12' insulated roll thru structure on a steel skid. Comes with 4
stainless steel roller carts. Pack size is 10' 6" long X 42" wide X 67" high. Green lumber in
one end, dried lumber out the other end. Holds 1100 BF of 4/4. Single phase 120V power.
$9,300.00
Michigan
14148
2006 Northland NK800, aluminum construction, includes tracks and lumber cart, electric
heat, single phase 220V. Handles up to 8'6" material. Over $7,000.00 comparable new.
$4,800.00
North Carolina
10869
Complete set of components for Nyle 25,000 board foot kiln. Only needs chamber.
$12,500.00
10868
Hitachi 8000 board foot dehumidification dry kiln, includes fans, controls, compressor.
Needs a new chamber. 10 HP 3 phase power.
$6,000.00
Alberta
North Carolina
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
Ohio
8/29/14
PAGE 17
16232 2 Timber Wolf Dry Kilns. 24000 and 40000 bf capacity. Components only. 15 Years old with
Updated 12 volt controllers, gas boiler, Fin Tubes, Fans,, Aluminum Doors with Track and Carrier.
Virginia
15812
STATE
AD #
Alabama
9867
Delaware
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
1988 Nyle L150 dry kiln, dehumidifier and control box. Needs repair. Unit will dry up to
3,000 bd. ft. of lumber when working properly.
Edgers, Board
Miner 4"x32" 3-saw edger, 50 HP 3-phase power
Miner Edger, B 53. 4" X 31". Like new condition. Has laser light hookups (no lights), 2
16304
blades (14"0), straight edge rail. 9' infeed, 9' out feed rolls. No power but has mount for
Updated
electric motor.
$8,000.00
Reduced
$850.00
PRICE (U.S.)
$3,500.00
$7,500.00
Illinois
16344
New
Riehl edger self feed with 2 blades, 13 HP gas motor, capacity 2" X 18", infeed and out feed
table, extra set of blades. No return. Good working condition.
$4,500.00
Kentucky
15998
Edger - 2 blade 4" x 30"
$3,500.00
Kentucky
15531
Salem 4"x 32" edger, 1 movable and 1 stationary blade, 25 HP 3-phase power
$4,000.00
Kentucky
15405
Miner 4"x24" 2-saw edger, one adjustable blade. Using 14" insert teeth blades. No power.
$3,500.00
Maine
15925
2006 Timberwolf edger 1410 hours Original owner. Under cover since new 22 hp Subaru
gas motor, will accept up to 20hp electric 2 movable blades, 16" carbide tipped split saws,
extra set of saws 2 laser lights 3 1/2" x 32" capacity 10' infeed and 16' outfeed tip table Self
contained hydraulics Edges within 1/16" in 16' Unit in overall excellent condition
$9,500.00
Michigan
16035
Shop built edger capable of cutting 6" by 36" material. Edger has 2 saws: 1 moveable, & 1
stationary with insert teeth. Top & bottom feed rolls, fence and saw powered by onboard
hydraulic unit. Screw rollers off-feed material onto a conveyer belt (powered by a 1hp.
motor) which then returns beside operator. Edger also has onboard conveyer fed sawdust
blower. Everything on the edger runs off of a single 100hp. electric motor.
$22,000.00
Reduced
Michigan
16260
Dixon Rusch 4"x30" board edger. Two blades- one fixed. 14" insert tooth. Produces 4"-22"
widths. 10' out feed roller deck. PTO shaft. Portable. Excellent condition, very low hours.
$6,750.00
Michigan
16050
Baker Edger 20 HP electric 2 1/4 or 8/4 x 28'' capacity. Hydraulic powered feed belts with
speed control, 1 Stationary blade and 1 movable blade controlled by hydraulic, also has an
auxiliary hydraulic line with volume control, Cemarline CL815 laser lights. Good condition
$8,500.00
Missouri
15638
2"x24" 2-saw edger, replaced flat belt drive with chain drive, replaced all Babbit bearings
with pillow block bearings. Does not have power but can take electric or gas.
$2,500.00
New York
16212
2007 Wood-Mizer 3 blade edger, 3800 hours, 25 HP Kohler gas engine, trailer package,
extended discharge roller system.
$8,000.00
Ontario
15532
Oliver 4"x24" 2-saw edger, includes infeed and oufeed and outfeed tables. No power.
$3,500.00
Pennsylvania
16194
Edger: 4" edger with 2 blades - 1 moveable and 1 stationary. Produces boards up to 18"
wide. No power.
$2,500.00
South Carolina
16033
Frick edger, 4" X 28". Older model, split bit blades, good condition. No power.
$1,000.00
South Carolina
15151
Miner 4"x27" 2-saw edger, flat belt drive, no power.
$1,750.00
Tennessee
14451
Older Frick 27" edger, 3-phase power. Weathered, rusty, and needs work.
$2,500.00
Texas
16227
Log Master Portable Edger LM E 26D. Heavy duty, powerful, industrial portable edger with
25 HP Kubota D1105-E liquid cooled diesel engine Includes (2) 15" diameter carbide tipped
blades - (1) fixed blade and (1) adjustable blade with 4" thickness capacity x 28" width.
Hydraulic feed of boards through the blades with hydraulic adjustment of the moveable
blade and board setworks. (3) Industrial infeed and (3) outfeed adjustable rollers with 84"
infeed and 84" outfeed roller bed. Highway approved trailer with 15" tires and 3,500 lb.
capacity axle. Easy to read scale stick at the front of the edger. Massive structural frame
made of 3" x 6" x 1/4" wall tubing. Weighs approximately 4,000 lbs. This unit was purchased
from a neighboring ranch who used it in the construction of a hunting lodge. Unit only has
12 hours on it. Excellent Condition
$12,500.00
Wisconsin
15970
Shop built board edger, 2 blades, roller infeed, belt outfeed. Edging side discharger.
$3,800.00
STATE
AD #
British Columbia
13065
STATE
AD #
Edgers, Bull
6" Bull edger, 36" wide throat, 3 saw, 2 movable, powered by Ford 6 cylinder 4 speed gas
engine, edge guide and air assist, 6" depth capacity. 6’ x 30" 3 roll edger infeed with fence,
powered, 8’ x 30" 6 roll outfeed, powered, extra 3 rollcase infeed assembly. Easy to
breakdown and load.
Edgers, Gang
Missouri
14421
Morgan Extended Champ: Custom built double bay gang edger 25 HP Linomar Gas Engine
Has 5 blades, 3 split on one side and 2 split on other side Tow package included
New York
13363
Jackson Lumber Harvester 6" x 24" bull gang edger, 6 cylinder Ford gas engine. Currently
using 9 blades to produce 1x4's and 2x4's. Includes 4" sawdust blower.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
$6,900.00
Reduced
PRICE (U.S.)
$5,500.00
$7,500.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 18
Tennessee
16114
Miner 6-saw gang/edger with a 75hp 3-phase electric motor. Saws have all recently been
reworked/sharpened and bearings are less than 3 years old.
$8,800.00
Wisconsin
13556
Meadows gang edger, set up with 4 insert tooth saws, infeed and outfeed tables, 40 HP
3-phase power.
$5,000.00
STATE
AD #
Alaska
14567
Renco 2-saw 6" vertical edger, no power.
$3,500.00
Wyoming
16097
Renco vertical edger with a 40 HP 3 phase electric motor. Comes complete ready to install
with controls, starter and figure board. In very good condition.
$5,500.00
STATE
AD #
Indiana
15774
10 ' Extension for LT300 includes one side support and log clamp.
$6,500.00
Michigan
16217
12' Extension for Wood-mizer, 1993 or later. Never been used.
$2,200.00
Vermont
14365
Pre-1986 Wood-Mizer 12' track extension, designed to attach to Wood-Mizer LT30 and LT40
series sawmills produced between 1982 through 1985, Needs some work.
$550.00
STATE
AD #
Feed Table
PRICE (U.S.)
Massachusetts
16315
STATE
AD #
Feedworks
PRICE (U.S.)
South Carolina
16172
Wichita Air Tube Disc Clutch, 50 HP Motor, Carriage Drive
South Carolina
16173
Salem Carriage Drive, 208 5059. Never installed. Never Used.
STATE
AD #
Filing Room Equipment
PRICE (U.S.)
Georgia
16345
New
Workshop Tools: Gardener chipper knife grinder, Sharp-All circle saw grinder with grinding
rocks, Bush hog grinder, Ronx Add-a-Phase (copper), 30 galleon air compressor. Will
separate.
$2,000.00
STATE
AD #
Firewood Processors
PRICE (U.S.)
Arkansas
14415
Timberwolf TW-6 log splitter, 6 way wedge, 28-ton capacity, log loader, PTO power.
$4,800.00
10841
Two firewood vending machines in 20' shipping containers, designed to sell 3/4 cu. foot
bundles in campgrounds for $5.00 each ($850.00 per cord). The larger machine will vend
from up to 96 bundles of wood without needing a refill, and the smaller machine will vend
up to 60 bundles without needing a refill. Asking $7,500.00 for the larger machine and
$6,500.00 for the smaller machine or $12,000.00 for both.
$12,000.00
Iowa
14695
2007 Timberwolf TW-6 log splitter with both log lift and table grate options, 4-way and
6-way splitter heads, 5" cylinder, 3 1/2" push rod, hydraulic controls and hydraulic tank, 28
ton splitting capacity, 8-second cycle time,18 HP Honda gas engine, handles up to 24"
maximum length. Original owner. Kept inside. Only produced 15 cords a year or so.
$7,999.00
Reduced
New Jersey
15641
2002 Ranier Hydraulics Chomper Simplex 14 with 20' hydraulic conveyor, 20' Honda gas
engine, log shear, 2/4/6/8-way wedges. Original owner. Under 90 hours. $22,000
comparable new with the conveyor.
$9,900.00
Reduced
New York
16069
WOOD-PAKer G300 by B&B Manufacturing. Wraps up .75 cu. ft bundles. Runs on propane
heat and electricity for conveyor. Includes trailer package. Motivated seller.
$12,500.00
Reduced
Texas
15161
2008 MultiTek Model 2020CSC firewood processor with Multitek 20' firewood elevator, on
factory axle, enclosed cab with heat, new tires all the way around, ready to haul by one-ton
dualie. Designed to handle crooked logs and for production averaging 2.5 cords per hour.
Includes chain saw bar bucking saw, 4-way splitter and brand new 8-way splitter, and
tandem hydraulic pump which allows operator to buck and split at the same time. 1600
hours. Includes 100 cords of processed firewood. Equipment $115,000.00 comparable new.
Will deliver for fuel cost and expenses.
$55,500.00
Texas
15470
Multitek 30' firewood elevator, on factory axle, ready to haul.. $25,000 new. Will deliver for
fuel cost and expenses.
$11,500.00
Wisconsin
14736
2003 Chomper Simplex 14 firewood processor, autocycle retrofit, PTO, 8 way splitter,
includes short log ram. Under 100 hours. Second owner.
$12,500.00
Wyoming
16201
CordKing Model 60 Firewood Processor. Year 2000. 110 HP Turbo John Deere Engine. 5545
hours. Well maintained. Price Firm.
$70,000.00
STATE
AD #
Forestry Winch
PRICE (U.S.)
South Carolina
10441
Carco/Paccar G80 hydraulic winch, 1" cable, can fit on D-7 or D-8 Cat, more. Over $50,000
new.
$10,000.00
Reduced
14925
Combination Future Forestry T36 logging arch with Mile Marker 70-500-50C 10,500# winch
mounted to arch with mounting bracket, factory modified to disassemble for palletization
and easy shipping, 100' remote control, large turf ties. $5,250.00 comparable new for all the
components. Will sell without the winch for $2,300.00.
$3,300.00
Iowa
Virginia
Edgers, Vertical
Extensions
J.A. Vance Feed Table
PRICE (U.S.)
PRICE (U.S.)
$825.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$2,750.00
$3,000.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 19
STATE
AD #
Forklifts
British Columbia
9595
Komatsu 8000# lift capacity forklift with new front tires and battery. Manual steering.
Includes all components for power steering. Only 10 hours since tune up. Not pretty but
runs good.
$4,500.00
Illinois
14702
Yale 4000 lb. indoor forklift, propane powered, 6' mast, solid rubber wheels. 7,775 hours.
$1,000.00
Reduced
Illinois
15864
Hyster YE40 Forklift, 4000 lb. capacity, 3 stage mast. Good paint. Runs well.
$1,800.00
Kentucky
16042
1996 Komatsu Forklift, 6000# capacity, pneumatic tires, propane engine, 2 WD
$8,500.00
Maine
14121
1980 Clark IT-60 series rough terrain forklift, 6,000 lb. lift, pneumatic tires. Needs minor
maintenance. Can see running.
$4,000.00
Reduced
Michigan
16012
1949 Massey Ferguson 202 wide front tractor with single stage forklift on back. Includes
instruction and parts manuals.
$2,000.00
Michigan
15962
Forklift - Allis Chalmers 500 gas. Engine rebuilt and has 600 hours.
$8,000.00
Michigan
15817
Tow Motor - H30 E monotrol power shift Hyster forklift with side shift and 13' height and LP
gass, 48" long adjustable width forks. Can lift about 3000 lbs.
$2,800.00
Reduced
Minnesota
15365
Lift-All L-60 6000# rough terrain forklift, 4-cylinder John Deere diesel engine, 6200 hours.
$7,500.00
Minnesota
14127
Ford 600 forklift, 4 cylinder gas with sideshift, 4000 lb. capacity.
$4,000.00
Missouri
16119
Forklift with flat head 4 cyl Continental gas engine. Has new starter but needs new battery.
$2,250.00
New York
10393
Cat DPL40 diesel forklift, 9000# capacity, dual drive, 6' wide carriage, 5' forks, 2-stage mast.
Good condition.
$14,500.00
Ohio
15838
1974 480A John Deere forklift. 7,800 hours, fork extensions up to 5 1/2'. 2 WD, new
alternator, new ring gear, and new starter. In great condition.
$6,000.00
Reduced
Pennsylvania
13894
Massey Ferguson 6500, 6500 lb. lift., foam-filled tires, larger tires 50%, smaller tires
replaced a few years ago. Runs fine. Running daily.
$9,100.00
Pennsylvania
15618
1996 Ingersoll Rand 6000-8000 lb. rough terrain forklift, 3003 hours
$21,000.00
Reduced
Pennsylvania
15686
Ford 4WD 5000#, all terrain mast loading forklift, needs work. Serious offers considered.
$4,000.00
Tennessee
15822
MF 6500, 14' mast with side shift.
$7,000.00
Furniture & Specialty Manufacturing
PRICE (U.S.)
STATE
AD #
Alabama
13892
DoAll vertical bandsaw, 36" throat, 15 HP 3-phase motor with starter, runs 1 1/4" blades.
$4,000.00
Indiana
12580
2004 Legacy Model 1800 Ornamental Mill. Includes over $1,000 in accessories: design kit,
casters, tool holder, rotary table, vise, moulding guides, over $3,500.00 in router bits for a
large variety of applications to include fluted column, spiral column, flat milling, post and
pole columns, moulding, furniture manufacturing, more. Original owner. Only 100 hours.
Single phase electric. Over $11,000.00 new with the extras. Will consider trade for a
bandmill.
$7,500.00
Reduced
Maine
14203
3 HP industrial shaper with knives for making raised panel doors, T&G of 1/2" and 3/8",
$300 in knives included.
$600.00
Reduced
Michigan
16087
German Peeler: 18" wheels, 5 knives that are 6" long. Head made by Dyna Products. Line
shaft ready.
$4,100.00
Missouri
15016
Hall & Brown mortiser and drill press, flat belt drive. Set up for lineshaft. Best for vintage
furniture or antique-style woodworking operation. Just under 2,000 lb. transport weight.
$1,500.00
STATE
AD #
Alabama
9866
Esterer sash gang, hourglass roll infeed leads to power feed rolls, 40 extra 6" blades.
Handles up to 20" material. 671 Detroit power
$75,000.00
British Columbia
15372
1998 Brewer 6"x25" gang rip with cant sizer, handles up to 16 saws, 125 HP 440V on arbor,
50 HP on cant sizer, 10 HP power pack with speed controller, includes infeed table. Only
run for 50 hours. Needs saw collars.
$17,000.00
Reduced
Idaho
15855
Stetson Ross XL 208 rip saw, roll feed, 8" arbor & 13" throat cap., 20 hp direct drive motor,
8"- 16" blade cap. 4" max depth of cut, many spacers and blades
$6,500.00
Indiana
16261
Gang Rip - Ogam PO 289 on hydraulic. Works well.
$5,500.00
Tennessee
13575
Memphis Machine Works 4"x24" gang ripsaw, 100 HP stand alone or 75 HP with starter,
includes several sets of carbide saws and spacers, 5 HP infeed with forward and reverse,
live outfeed rollcase with 4" rollers.
$6,000.00
Utah
14777
Torwegge straight line gang ripsaw, single arbor, includes 12" blades and spacers, 39 HP
3-phase 220/440.
$6,000.00
Gang Rips
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
PRICE (U.S.)
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 20
Pendu double arbor gang rip, wires and hydraulic hoses damaged in fire, no damage to the
mill. Disassembled.
Virginia
15473
STATE
AD #
Illinois
15870
Brewer 6" X 12" single arbor gangsaw, indexible tooth, hydraulic feed, very good condition
$8,500.00
Michigan
15539
Wagner 8"x8" double arbor gang saw, variable speed infeed and reverse, new sawdust
blower. No power.
$6,000.00
Michigan
15677
Frick 8"x24" double arbor gang saw, 16" carbide blades, 3/16" kerf, hydraulic drive, 160 HP
Volvo diesel power unit, sawdust conveyor, includes extra blades and spacers.
$12,000.00
Reduced
Ohio
15012
Cornell double-arbor thin kerf gang saw, handles 6" height x 8" width, variable speed feed,
100 HP on bottom arbor, 75 HP on top arbor. Easy to set up on lineshaft. Need the space for
other equipment. Price firm.
$3,850.00
Oregon
15933
Twin Powell 20" gang saw with 2 front and rear press rolls c/w infeed and outfeed with 150
HP
$7,500.00
Pennsylvania
16107
Keystone Double Arbor Resaw with sizer. Live deck, unscrambler, waste conveyor, manual
pull-down chop saw, and live rolls.
$50,000.00
South Carolina
15391
Britt 6"x14" single arbor gang saw, hydraulic feed, dead roll outfeed, 75 HP 3-phase
$6,500.00
Wisconsin
16299
2 - Jackson Lumber Harvester Gang Saws, single arbor, 6 blade, 24" diameter, 8" X 30", split
collars. 1 machine is line shaft ready. Other machine is older electric unit. $2000 each.
$2,000.00
Wisconsin
16213
Ro Jo Double Arbor Gang Saw. Variable speed - in feed, forward and reverse. All Hydraulic
Drive. Cuts 6" X 8" cants. Has Sizer Head, Extra Blades and Spacers. Line Shaft Ready.
$9,000.00
STATE
AD #
Grading Station
PRICE (U.S.)
North Carolina
15873
Complete Grade line by Moore Kiln of Jacksonville Fla.(Currently USNR) Line is set up with
infeed chain feeding dual unscramblers. which then feed a grade chain with an over head
grader station. A grader can sit and operate a board turner then enter grade into a tally
machine. This is followed by the stacker chain that feeds a automatic lumber stacker where
lumber can be put on sticks then rolled out to go into dry kiln. This equipment is completely
dismantled but the plans are included to rebuild.
$48,500.00
STATE
AD #
Grapple
PRICE (U.S.)
Utah
16037
STATE
AD #
Alabama
9872
70' 3-strand green chain, 5 HP 3-phase power.
$7,500.00
British Columbia
13068
Green chain: 5 strand 24’ x 40’ rollertop chain with edge rollers, 5 HP drive with Crofts
reducer, four 4’ x 10’ 5-roller lumber stacking decks. Easy to breakdown and load.
$4,900.00
Michigan
14959
40' 2-strand green chain, hydraulic motor with gearbox, #80 chain, uneven leg length due to
sawmill space constraints so, buyer would need to extend two legs.
$2,500.00
Virginia
10053
3 Strand Green Chain. 30' long X 8 1/2' wide. Electric Engine, Single phase power, 110 V.
No Gear Box. Chain in 10' sections for easy transport.
$3,000.00
Wisconsin
16296
12' 2 strand Green Chain with electics and gear box.
STATE
AD #
Grinders
PRICE (U.S.)
Indiana
15912
1991 Weima Model W L4 Horizontal Wood Grinder with 36" rotor and extra screens. Has a
new 20 HP electric motor. Needs electrical work in control panel. New paint and low hours.
$5,500.00
Indiana
14953
West Salem 2822 BH grinder, 150 HP electric motor, Cutler Hammer soft start. Includes
infeed and outfeed conveyors and two complete sets of hammers, one in the mill and one
extra, and one new hammer kept for using as a pattern. Was running fine when removed
from service.
$27,500.00
Reduced
Kentucky
15160
Precision Husky Model 6K-440 6-knife grinder, new bearings and belts and reconditioned
the tables, 5 HP 3-phase main motor, 3/4 HP rotatior motor, includes transformer and on/off
switchbox. $17,000.00 comparable new.
$8,900.00
Massachusetts
16309
1987 WHO Tub Grinder Model P-12 500 HP SERIAL 4W7475 12' Diameter Tub 56" Long
Shaft
$38,500.00
Michigan
15538
Haybuster industrial slow speed tub grinder, 3306 Cat diesel power, low hours on complete
overheaul, missing one or two hammers.
$20,000.00
New Hampshire
14386
1997 Rotochopper Model MC166 grinder, belts and hoses damaged in a fire. No damage to
the steel or the frame. Includes original motor and replacement motor.
$45,000.00
New York
13565
Hud-Son Equipment grinder, portable on factory axle, 2" ball, 30 HP Lombardini diesel,
variable speed hydraulic belt infeed 18" width x 6' length, 176 hours.
$5,500.00
Gang Saws
Brave Products 3 pt hitch log skidder grapple for tractor. Lifting capacity up to 2,000 lbs.
Handles logs 4” to 36” in diameter.
Green Chain
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$3,500.00
PRICE (U.S.)
$1,500.00
PRICE (U.S.)
$900.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 21
Ontario
16102
Morbark Colorant Attachment (for Morbark Tub Grinder) Original $12700, Asking $7000
Good Condition - Used only 100 hours
Pennsylvania
15809
Wood-mizer bandsaw grinder - selling for parts
South Carolina
15265
1997 Olathe Model 867 tub grinder, 10' tub, 2 new belts, new tires on trailer, 450 HP
Cummins diesel power. Good condition.
$45,000.00
Virginia
16105
Chute Horizontal trim scrap grinder. Grinds 6 tons per hour. 250 diesel Cummings engine.
Mounted on trailer.
$4,200.00
STATE
AD #
Hogs
$7,000.00
$150.00
PRICE (U.S.)
Indiana
15651
Lamb 44" hammer hog, 200 HP 3-phase electric, 2 complete sets of hammers, 3/4" screen,
blower and 40 HP 3-phase motor. Both motors need on/off switch. Running fine when
removed from operation in 2010. Kept under roof.
Kentucky
16235
Hammer Hog - Jeffery Mini Mill Hammer Hop. 40 HP
New Jersey
6941
Williams hog with feed bend, vertical feed bottom discharge, 75 HP 3-phase power.
$5,500.00
Ohio
15729
2012 Meadows Model 85 hammermill. No power. Origianl owner. Maybe 100 hours.
$10,000.00
Mid Oregon Industries hog. 8.5"x6" opening, 20 HP 3-phase motor 230/460 volt
$7,500.00
Reduced
$6,200.00
Utah
15511
STATE
AD #
Husk
PRICE (U.S.)
New Hampshire
15551
HMC SH-17 husk with top saw and built-in bearer belt, includes 50 HP 3-phase motor on top
saw and V-belts for headsaw.
$7,500.00
South Carolina
15672
Husk frame and mandrell with offbearer belt, includes pulleys and belts
$2,200.00
Reduced
STATE
AD #
Ohio
14626
STATE
AD #
Oregon
15173
STATE
AD #
Industrial Equipment
36" Continuous rotation grapple for Barko 160 loader.
Laser Sights
Laharco Model 8200BB laser with power supply, 115V 60Hz, 0.5A. Works fine.
Loaders, Knuckleboom
$1,800.00
PRICE (U.S.)
$3,500.00
PRICE (U.S.)
$550.00
PRICE (U.S.)
Georgia
13288
1985 Precision Husky Brute XL235 20,000 lb. knuckleboom loader, newer 1996 Cummins
4BTA diesel engine, mounted on self propelled carrier.
$19,500.00
Reduced
Kentucky
15939
Husky Brute Knuckleboom XL175 on pitts trailer, 6 cylinder JD engine, saw package
hookups, heat, good condition.
$18,500.00
Reduced
Kentucky
15244
Hood Model 24000 knuckleboom loader, on highway-capable rubber with 5th wheel trailer
hookup, joystick controls in operator cab, self propelled, includes log bunks with tag-a-long
cutoff buck saw, John Deere diesel power.
$39,500.00
Maryland
13826
Prentice 110 knuckleboom loader, PTO, mounted on 1962 GMC cabover.
$3,500.00
Minnesota
14744
Prentice G, upgraded to a 110 series, includes new rear A-frame, new boom gear, many new
parts, 20' log bunk rails with cross members.
$7,500.00
North Carolina
13460
Prentice knuckleboom on self propelled carriage, 6 cylinder Cummins diesel power. Loader
needs work. Carriage in good working condition.
$14,000.00
Ohio
15287
2008 Metavic dual axle trailer with 1400 knuckleboom loader, quick connect. Run for 3
years.
$18,500.00
Oregon
14746
2002 Metavic gooseneck dual axle 20,000# trailer with 1400 knuckeboom loader, 14' boom,
18' bed, 13 HP Honda electric start gas engine. $45,000.00 comparable new.
$18,500.00
STATE
AD #
Loaders, Skid Steer
PRICE (U.S.)
Kentucky
16041
2009 Mustang 2086 Skid Steer Loader, cab with heat/AC, 2 speed, approximately 2000 hrs,
includes grapple forks and bucket
Kentucky
14380
2005 Gehl 7810, 2162 hours, replaced original engine with Perkins diesel engine, all good
tires two are new, includes bucket and hydroglide forks, cab with a/c and heat, good
condition.
$18,000.00
Missouri
15355
2007 Komatsu CK35-1 rubber-track skid steer loader with pallet forks and two 78" buckets,
1375 hours. Starts good. Runs good.
$32,500.00
STATE
AD #
Loaders, Track
PRICE (U.S.)
British Columbia
13827
Barko 475 tracked log loader, button-top grapple, 230 HP Cummins 6CTA8.3 diesel power,
235 Cat undercarriage. Around 30,000 hours. Good running condition. Can see in operation.
91,000 lb. shipping weight.
$14,000.00
Iowa
14097
2006 ASV RC100 3800# tracked skid loader with rubber, 99.5 HP, 2700 hours, runs fine,
75% undercarriage. 10,200 lb. transport weight.
$22,500.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$27,500.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 22
Ohio
16022
Rayco C 85 L 2002 steel track crawler/loader. 1011 Deutz diesel engine approx 1000 hrs.
Has bucket, forks, and counter weights. Full cab with heat. 40 gallon hi flow hydraulic
system.
$34,000.00
Pennsylvania
16211
1985 John Deere 450 C Dozier. Under carriage approximately 50%. Includes forks, no
bucket. Good working condition.
$11,000.00
STATE
AD #
Loaders, Wheel
PRICE (U.S.)
British Columbia
13470
1993 Kaldnes SL9000 short log handler/log stacker, 360-degree grapple, 3406 Cat diesel
engine, 45,000 lb. capacity. Around 20,000 hours. Engine and major components rebuilt.
Not used heavily since rebuild. Good condition. Can demonstrate. Approximately 140,000 lb.
shipping weight. Can be disassembled for shipping.
$45,000.00
Illinois
16283
Timberjack Wheel Loader 1500 with Cummins 5.9 diesel engine. Lifts 1600' lumber. Used
daily.
$13,500.00
Illinois
16248
CAT IT18B Wheel Loader. Includes 'Quick Attach', Buckets, and Forks. Approx. 15000 hours.
Tires in Fair Condition.
$32,000.00
Kentucky
15788
Case W18 Loader with forks
$14,000.00
Reduced
Kentucky
15786
910 Cat wheel loader, good engine. Transmission needs new centerpins. Rough.
$9,000.00
Mississippi
16335
New
Clark 85 Bigwheel Loader with forks that are 6'9". Brakes need work.
$11,500.00
New York
16071
1975 Soderham Forwarder 353, Prentice 500 log loader, 353 Detroit diesel. Motivated seller.
$12,500.00
Ohio
15965
Waldon wheel loader with < 325 hours, tires fairly new, 15000 lbs lifting capacity, diesel
engine with turbo, includes bucket and forks
$24,500.00
South Carolina
16181
John Deere 544C Loader Forrest Package, L28 Skidder Tires. Comes with Forks with Clamp,
Blade, Bucket, 26" Roanoke Directional Sheer, and Roanoke Buncher.
$23,500.00
South Carolina
16180
Clark Bobcat 1080 B Feller Buncher, Cutting Diameter 16" with Accumalator John Deere
Engine.
$7,000.00
Texas
11654
2004 Case 621D wheel loader, 4' forks with log clamp and bucket, 6000 hours.
$85,000.00
Virginia
15999
920 Cat Wheel Loader, includes 1 set of log forks with top clamp and slip on sawdust bucket.
Motor runs well. Tires are bald.
$13,000.00
Reduced
STATE
AD #
Log Decks
PRICE (U.S.)
Illinois
16026
30' Log Deck (stationary), 2 strand, 32" center to center. Comes with either Hydraulic power
or 3 phase electric power unit. Good condition.
$3,500.00
Michigan
16347
New
Morbark Log Trough. 21' long. Powered by 5 HP 3 phase motor. Includes hydraulic log
kicker.
$3,000.00
Ohio
16271
Log Deck
Ohio
15990
2-strand hydraulic log deck with stop & load, portable on wheels
$4,000.00
Pennsylvania
16134
Live deck with hydraulic unit
$4,000.00
Virginia
$750.00
16277
22 ft 3 strand log deck with drive no power
Updated
$3,000.00
STATE
AD #
Log Home Manufacturing
PRICE (U.S.)
Michigan
8928
High production tongue & groove mill, custom designed for Weyerhouser to cut T&G in 4'
OSB and plywood, constant speed chain feed, two 480 v 3-phase motors. Works on most any
type of 4' wide material. 8' x 10' footprint.
$5,500.00
STATE
AD #
Log Lathes
PRICE (U.S.)
Idaho
13604
2006 Roundtec 9000 log lathe with Jumbo kit, bought new but never used, includes full set
of blades from 8" to 16", digital readout, hydraulic log lift, notching kit, waste conveyor,
3-phase power. Cuts up to 30' length. $85,000.00 comparable new.
Log Turners
$69,000.00
STATE
AD #
Michigan
15354
One set of two Turbo Turners, no power. Used for maybe 5 years.
PRICE (U.S.)
$3,000.00
Ohio
16196
Log Turner with Hydraulic Tank. Good Condition. Make an Offer.
$2,500.00
Ontario
14052
Helle B Model chain log turner, plumbed for hydraulics.
$1,500.00
STATE
AD #
Lumber Stackers
PRICE (U.S.)
Indiana
15921
STATE
AD #
Lumber Tarps
PRICE (U.S.)
Two rotating stacking racks.
$3,500.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
Massachusetts
16311
STATE
AD #
Pennsylvania
16151
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 23
3 Canvas Lumber Tarps for Flatbed, 2 very good condition, 1 patched, They do have a
company name on them. They are roughly 26X27 with an 8ft flap. Asking $225 each will
take$175 for the patched tarp.
Mortisers/Drill Presses
Briggs Machinery Pittsburg PA - Mortise and Tenon Machine. Older machine, heavy cast
iron, weights approximately 1500 lbs. No power, never hooked up completely but can be
hooked up with line shaft. Fair condition.
PRICE (U.S.)
$1,800.00
STATE
AD #
British Columbia
15384
2005 Logosol PH260 4-head moulder with chip extractor
$8,500.00
Illinois
15174
Logosol PH260 with infeed and outfeed tables, 3-phase electric, under 20 hours. Includes 20
sets of knives: log siding, crown moulding, hardwood flooring, V-groove, shiplap, baseboard
and more.
$9,500.00
Kentucky
16224
SCMI Superset 23, Year 1999. 5 Head Moulder. 5 X 9. Converted to line shaft by Hoover
Repair. Excellent condition.
$29,000.00
Louisiana
14865
2009 Logosol PH-260 4-sided moulder, 3-phase power, chip extractor, extended tables,
moulding knives and tongue & groove knives included. Original owner. 10 hours.
$11,250.00
Michigan
14550
Bridgewood 2" x 6" 4-head moulder, lineshaft ready. Includes extra heads and knives for
tongue & groove, crown moulding, dowels, and a few other applications. Also includes Jet
4-bag sawdust collector.
$6,950.00
Michigan
10406
1983 Weinig Model U-17 7-head moulder, 4"x6" capacity. 3-phase power. Good condition.
$7,500.00
Minnesota
13061
Smithway XL 2"x4" 4-sided moulder, two 5 HP 3-phase motors.
$2,250.00
14854
2006 Logosol PH-260, 3-phase electric, includes chip extractor and extended tables, knives
for tongue & groove, crown moulding.
$8,250.00
Mississippi
8911
1998 Woodmaster Model 725 Pro Pak planer/moulder/sander/gang rip, variable speed, over
$1,000 in moulding blades (15 total), extra gang saw blades, extra planer head, extra
accessory shaft, extra set 25" blades, 44" extension, 5 HP 220 single phase motor, separate
3 HP feed motor. Nearly new. Under 10 hours. Comparable $4,500.00 new with extras.
$3,500.00
North Carolina
16203
2004 Logosol PH260. Includes basic tooling, S-4S knives, in feed and out feed tables, chip
extractor, Electric 3 phase - 280 V. Original owners.
$8,500.00
Pennsylvania
16004
Model 405 Diehl 5 head, 6" X 9" moulder, includes ductwork, 30 HP Cornell blower, all
electric - 3 phase 220/440. Still Operating.
$12,000.00
Quebec
9421
Yates American C-4, 4" x 8" capacity, 600 volts, 2 x 7.5HP on top and bottom + 2 x 5HP on
each side, direct drive, variable speed, all on bearings, 100 % rebuilt. Like new.
$6,850.00
Reduced
South Carolina
16030
Wood-Mizer M-485 SP moulder with blower, tool box, and extra knives.
$12,500.00
Washington
14707
Smithway Excel 2"x4" 4-head moulder, excellent condition, includes profile knives for
tongue & groove, picture frame, base and casing, sawdut blower with ductwork, 20 HP
3-phase on top and bottom heads and feed, 5 HP on side heads.
$3,500.00
Washington
6247
Smithway XL 4-sided moulder, handles 2"x 4", all single phase, 5 hp drive, 1/4 hp feed. Will
trade for band sawmill.
$1,200.00
Wisconsin
16046
Williamsport 3 sided moulder. Heads on side are interchangeable and comes with extra set.
Side heads can be adjusted up/down within 1½". One set of heads is for ship lap and the
other set of heads is for tongue and groove. The side head has roller bearings and the top
head has babbitt bearings in good shape. Line shaft ready. Machine is complete. Can see in
operation.
$2,500.00
Reduced
Wisconsin
15650
Logosol-PH260, includes setting rule, setting block, and $2,000.00 in tooling. No power.
Lineshaft ready.
$7,500.00
Reduced
Wisconsin
11746
Hermance 8"x12" 4-sided moulder, newer style bearings, lineshaft ready, includes knives for
tongue and groove, log siding, log home patterns. No power.
$7,500.00
Wisconsin
14571
Matison 276 4-head moulder, power feed, 10 HP on top and bottom heads, 5 HP on side
heads, 5 HP on feed, includes tooling for tongue & groove, V-notch panelling, and planing,
dust collection system with metal piping, blower not included.
$7,500.00
Wisconsin
14742
KTM 5-head moulder, 20 HP 3-phase power on horizontal heads, 15 HP on vertical heads
240V, push-through, 1.5 HP variable speed feed, some moulding knives included
$2,500.00
STATE
AD #
New York
15090
STATE
AD #
Mississippi
Moulders
$225.00
Mulch Manufacturing/Coloring
Color Critter attachment for Bandit Beast grinder, includes digital readout monitor and
controls. $18,000.00 comparable new.
Outdoor structure/furniture mfg.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
PRICE (U.S.)
$4,500.00
PRICE (U.S.)
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 24
California (North)
15258
Complete gazebo, ornamental structure and outdoor furniture manufacturing operation:
Equipment includes Logosol PH 260 S4S molder/planer, 3-phase power, with several profile
sets, dust collector and duct system. Oliver 12" table saw with power feed and 3-phase
power, like new. Dewalt radial arm saw with 17" blade and two 10' roller tables. Jet 10"
table saw with 8" dado set, 8" and 10" blades. Makita Beam Saw with 3-phase power. Ryobe
12" bench top planer. Rockwell reversable shaper, single phase. Pacco horizontal boring
machine. Jet drill press. Dewalt metal cutting chop saw. 2 stage air compressor, single
phase. Milwaukee magnum drill (new), Milwaukee magnum drill, Milwaukee tight quarters
drill, drilling accessories, P&C reciprocating saw. Makita 2 1/4 HP router with over $1,000
in router bits, router table, Incra router table fence, buffer. 13'-6" ex. Level, Stabila 6'- 6"
level, Stabila 4' level, Stabila 32" level, Stabila 16" level, 24" level, digital angle finder, PLS
laser level, layout tools, jigs and fixtures. Support equipment includes 4 custom made heavy
duty 4,000 lb. carts, 1,500 lb capacity each, pallet jack, 28' extension ladder, 24' extension
ladder, 16' aluminum folding ladder, 8' step ladder, 6' step ladder, 4' step ladder, 2' step
ladder.
STATE
AD #
Package Saws
Michigan
14171
STATE
AD #
Kentucky
15502
1998 Rayco Edge automatic pallet machine with stacker and 10' live outfeed table, 5 HP
3-phase 460V
Kentucky
15182
Custom built pallet jig for assembling hand-made pallets. Have averaged 20 pallets per hour.
$400.00
Reduced
Kentucky
15994
Pallet jig: Nail-ease. Stringer pallet with block pallet attachment.
$2,500.00
13747
Cutstock operation: Merchandising system with hydraulic 36" bar, 20' 2-strand infeed deck
with stop & load, 20' 2-strand greenchain, 20 HP 3-phase, 21 Saw Shop 36" circular scragg,
both saws are movable by lever, 7 HP sawdust blower, 30 HP 3-phase on each saw, handles
logs up to 15" diameters x 9' length.. Double end trimsaw with loading platform, includes 4
sets of 20" saws, 1 movable saw, 3 HP 3-phase on each saw, Smith single head band resaw
with return, 15 to 20 HP 3-phase power, followed by Morgan single head band resaw with
return. Includes 75 HP 3-phase converter and three 30 HP 3-phase converters, all electrical
wiring, boxes, and starters. Can produce 6,000 to 7,000 bf of cutstock daily.
$45,000.00
Ohio
15199
Remaining components of pallet manufacturing operation: Cornell Model 300 double arbor
gang saw, 671 Detroit 1000 hours on complete rebuild, includes Cornell sawdust blower, at
least 20, blades and complete set of aluminum spacers from 1/8" to 1 1/2", Hazelthorn
single-head notcher, Phelps sawdust blower, pneumatic power, Oliver 20" swing-out cutoff
saw, manual stops, complete set of roller beds, John Deere 150 HP power unit, 100 hours on
complete rebuild.
$24,000.00
Ohio
11233
1996 GBN Explorer complete with stacker. Always in a building. Can see running. Capable
of producing 1000 pallets daily with 3 operators. Original owner.
$79,500.00
Pennsylvania
14311
Pallet manufacturing operation: 30' HMC hourglass rolls with hold down and up log kicker,
CTR 40 slasher saw mounted on hour glass rolls; all hydraulic driven. 22' short log deck 34"
wide, custom built 2-saw scragg mill, sharp chain, 36" blades, handles logs 16" diameter x 6'
length, hydraulic power, extra set of blades, extra teeth, Jockey grinder, 3' deadrolls, cants
move to 16" ripsaw/splitter saw with laser light and live infeed, slabs move to 2-saw 8" wide
slab edger with 16" blades and live infeed; all with blowers. Morgan 6"x6" single head band
resaw 20 HP electric with blower, no return, deadroll rollcase to DeWalt radial arm saw 5
HP. Includes hydraulic pack mounted on front, includes hydraulic tank, fuel tank, dead rolls.
All ready to go to work. Mill designed to process logs up to 16" in diameter up to 6 ft. long.
Cuts between 2,000-2,800 feet per hour, depending on log size.
$28,500.00
STATE
AD #
Pallet, Dedusters
PRICE (U.S.)
Wisconsin
15929
STATE
AD #
Pallet, Nailers
PRICE (U.S.)
South Carolina
15392
Pallet Chief II with crossover transfer and deluxe stacker, new condition. 5 HP 3-phase 460V.
$12,500.00
Wisconsin
16297
2004 Rayco Edge. 3 Stringer Pallet Nailer. Air and 3 phase electric operated. Includes
carriage and stacker. Good running condition. MAKE OFFER!
$13,500.00
Kentucky
STATE
AD #
Indiana
16331
New
Kentucky
Virginia
2 Holtec 7 foot bars, 1 is brand new and runs 063 chain, and the other is used and includes
2 carbide chains.
Pallet Manufacturing
Baker deduster, hydraulic up/down, 3-phase power. Needs new brushes
Pallet, Notchers
$29,500.00
PRICE (U.S.)
$1,000.00
PRICE (U.S.)
$12,000.00
Reduced
$3,800.00
PRICE (U.S.)
Bob Hanna double head notcher with two 20 HP 3 phase electric motors. Has unscrambler
feed, indexible teeth and blower system. Notches approx. 2500 stringers per hour.
$15,500.00
15826
Double head Brewer notcher with small blower attached, also has hydraulic feed attached.
Updated
$4,800.00
14718
Quality Machine indexable 2-head notcher, 70" capacity, no power.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$5,000.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 25
STATE
AD #
Pallet, Stackers
Indiana
14490
FMC automatic pallet stacker w/10' outfeed rollers and auto ejection, handles up to 60"
pallets, 3-phase power
$3,000.00
Oregon
15932
Complete stacker system including: infeed/outfeed, stacker, stick placer, and all remaining
drive and electrics (contect of the building)
$25,000.00
STATE
AD #
Phase Converters & Electrical
PRICE (U.S.)
PRICE (U.S.)
Alabama
15557
135 HP phase converter with 100KVA 480V transformer.. Currently running 18 motors off
this system.
Alabama
15558
60 HP phase converter
STATE
AD #
Planer/Moulder/Knives
PRICE (U.S.)
Georgia
16024
Profimat 22 N planer moulder with 5 heads, computer controlled, 3 - 25 HP electric 3 phase
motor, 9" X 6" capacity, approximately 1000 blade sets. Also includes Profile Grinder R 930.
$18,000.00
STATE
AD #
Planers
PRICE (U.S.)
Alberta
10122
Forano 6-head 4"x12" planer/moulder, 12" top and bottom planing heads, 3" side heads with
various profile knives, belt drive, 75 HP 3-phase feed, sawdust blower, 35 HP. Includes all
manuals. Serious offers considered.
$6,000.00
Reduced
Alberta
15189
Wadkin Bursgreen T500 11"x20" single sided planer/surfacer, automatic table lift, 7.5 HP
3-phase motor, several sets of planing knives, mounted knife grinder
$4,000.00
Reduced
British Columbia
16089
Yates planer: 12 knife top and bottom, belt drive, new chrome feed rolls and bed plates, 6 x
12 opening, several spare side heads and belts
$8,000.00
British Columbia
13071
Rexon single head 8" x 16" surface planer.
Colorado
13745
Pinheiro 800/MF24" double surfacer, complete with electrical panel. One head has quick
change knife and the other has corrugated. Never used since complete rebuild.
$8,000.00
Reduced
Colorado
13743
Newman M-68 4-head planer-matcher, 6"x12" capacity, Direct motor drive, 10hp feed. 40
top 20 sides bottom, no direct drive motor. Serial # 12947. Converted top and bottom to slip
on heads 2-1/8" with all hydro sleeves and ran all motor controls on variable-frequency
drives. Machine was modified to run hardwood flooring. Top and bottom spindle. Includes
hydrolock sleeves for removal of heads, top profiler and many extra parts from another
machine.
$8,000.00
Florida
15194
Newman Model 500 4-sided planer, belt driven, includes cutter head and bottom profile with
knives for flooring, paneling, shiplap, planing, many extra parts, sawdust blower system with
piping, choice of 671 Detroit or Cummins diesel power unit.
$15,000.00
Iowa
13584
J.A. Fay & Egan 666 Lightning 4-sided planer, all hydraulic with 500 gallon reservoir, 200
HP John Deere diesel power unit, low hours, sawdust blower with 16" piping from each
outlet. Includes knives for producing 6"x8" D-Log profiles.
$50,000.00
Kentucky
15404
Yates-American A-20 8"x15" four-sided planer, two profile heads, bottom head needs some
work. Include knives for t&g, D-log, knives, some chrome tables, sawdust blower with piping.
Converted to V-belt drive. Powered by 6-cylinder Continental disel power.
$8,500.00
Louisiana
12753
Whitney 2-sided planer, 30" knives, 15 HP on top, 10 HP on bottom with controls and
disconnects. Removes 13/16" per cut, includes sawdust blower. Can use either as rough end
or finishing planer.
$18,500.00
15926
Woods 412 planer matcher: 4 sided planer 6"x15" cap., set up at 80lf per min., ran in white
cedar mill for 25 years, 1 13/16 spindles, 6 knife top and bottom heads, 35 hp top, 20 hp
bottom, 15 hp on side heads. Converted to 480 volt electric motors with v-belts v-match, s4s,
3'' t&g, shiplap, 6/4 eased edge, 5/4 eased edge tooling with extra side heads. Includes all
electrical, 42" blower w/50hp 480v motor 215 kw 3phase gen set with 12.7 liter 60 series
Detroit. 849 hours on brand new generator end. Michigan Knife Co. knife grinder. All
equipment in excellent overall condition
$27,500.00
Maine
14067
Soucy 4"x12" 4-sided planer,V-belt drive with chain governor, includes tooling for planing up
to 8" material, T&G at thicknesses of 3/8", 1/2", 3/4", decking of 5/4" and 6/4", rounded edge
of 4x4". Includes two sawdust blowers with piping. Power not included. 50 HP power
requirement.
$6,000.00
Reduced
Massachusetts
16321
New
Planer Out-Feed Belt: 18" wide, 4 ft long planer out feed belt
Michigan
10405
Powermatic Model 225 8" x 24" Quiet Head single sided planer/surfacer, 15 HP 3-phase
power. Low hours.
$7,000.00
New Jersey
15644
1997 Bridgewood BW-508 8"x20" single sided planer, 5 HP 3-phase
$1,500.00
Reduced
New York
15262
Powermatic Model 160 single-sided planer/surfacer 6"x16", 7.5 HP 3-phase,
$1,350.00
Maine
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$10,000.00
$2,200.00
$900.00
$825.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 26
New York
14036
L Power & Company 6"x18" 4 sided planer, 4 knives on each head, greaseable bearings and
bushings, machine is still very tight, can be run by PTO or power unit, drive either by flat
belt (included) or v-belt, includes tooling for tongue and groove and a brand new, never
installed set of planing knives and mounting hardware.
North Carolina
8718
Hermance 8"x10" 4-sided planer, belt feed. Some Babbitt may have been changed to newer
bearing. No power. Currently on skids. Approximately 4,000 lbs. transport weight. Will
consider trade for Newman Model 500.
$5,000.00
$3,500.00
Oregon
11663
Powermatic 8" x 20" single sided planer/surfacer, 7.5HP 3-phase power.
$1,200.00
Pennsylvania
16006
Buss 30" planer #44 6" X 30" single heliacal, 3-phase 220/440; Still operating. $3,000.00
$3,000.00
Pennsylvania
15484
Newman Model 500 6"x15" 4-sided planer with pineapple feed table, belt drive, shiplap and
profile heads, no power.
$9,500.00
Pennsylvania
15104
Whitney Model 32A 8"x30" single sided planer/surfacer, 3-phase power, belt driven, Babbit
bearings in good condition. Includes knife sharpener.
$3,000.00
Saskatchewan
7991
Newman 512 belt driven 8 knife planer, all ball bearing, top & bottom jointers, side head
jointers, double pineapple feed table, big blower & piping, 3 speed transmission, hook to
feed works w/reverse, 2 sets tongue & groove side heads. Needs new belts. Good condition.
$22,000.00
Saskatchewan
10650
Mattison Model 222 6" W x 12" H 4-sided planer, Reeves VariSpeed feed, 480V 3-phase, 4
10 HP motors, 5 HP feed motor, sawdust blower. All on its own covered trailer (mobile).
$5,500.00
South Carolina
16178
A66 Yates American Motorized Planer, 12 Knife Bottom/Top Head. Bottom/Top Profile.
Several Extra parts.
$7,800.00
South Carolina
16029
Yates American A-20 4 sided planer, 4" X 12" capacity, comes with 2 electric motors and
piping that connects with blower. Also has a pineapple feed table. Does not include blower.
$10,000.00
Tennessee
10342
Yates-American A-26, 8"x12" capacity, outside ball bearing, belt driven, good condition,
includes all kinds of knives and sawdust blower with piping. Offers considered.
$10,000.00
Utah
15510
Woodtek two-head planer, 6" height and 16" width capacity, 3 HP top head. 2 HP bottom
head, and 2 HP drive motor 3-phase 220V motors
$2,000.00
Washington
14805
Belsaw 6"x 12" single sided planer, 5 HP single phase 220V, mounted on scissor lift.
Includes infeed and outfeed roller beds.
$1,500.00
Wisconsin
16303
Northfield, size 240 commercial 24" heavy duty double surfacer/planer with Reeves drive.
40 HP top head, 30 HP bottom head, 15 HP drive. Helical, spiral heads, with sharpener
included. Excellent condition.
$18,500.00
STATE
AD #
Post & Rail Manufacturing
PRICE (U.S.)
15222
Complete Post & Rail processing operation: Rail assembly press, 12' capacity, 2 air cylinders
3400 psi, each. (need 100-110 psi only) . Footprint: 45" width x 12'10" length x 7'9" height
(8'6" with guard up), rail height capacity up to 39". Ritter line boring machine, 13 spindles,
10mm shaft size, 2" o.c. (on center), positive stop, can drill 5 holes at 6" o.c., 4 holes at 8"
o.c. and 13 holes at 2 o.c., extruded aluminum track and slide blocks, easy adjustments, air
100-110 psi, 3 HP 3-phase.motor almost new. $600.00 in new bearings Custom steel tables,
1 set of 1-1/2" carbide drills,2 sets 2" (50mm) carbide drills. Tenoner, new, 5 HP 3-phase.
Cuts 8-10 tenons per minute, 1-1/2" cutter head with extra set of knives, powerful custom
made clamp for 2" to 5" material, linear bearing 1" rod sled, cast iron stand, room for double
head cutter, footprint: 20" x 106" x 56" high, 5 HP 3-phase. Woofer II, sharp carbide
cutterhead, 3450 r.p.m., 2 HP single phase 220V., well maintained.
$22,000.00
Wisconsin
11776
2004 Dyna Post & rail processor, never really used, just tested on a couple pieces. Includes
tenoner, drill press, 24" chop saw, 20 HP Honda gas engine. Also includes extra square
shoulder head which cost an additional $2000.00 and a separate double head sander with
5.5 HP Honda engine. Over $16,000.00 new.
$11,500.00
STATE
AD #
Arkansas
16152
Morbark PSA Post Peeler 1999 model. Forest Tool and heavy duty peeling head. Electric 3
phase.
$16,500.00
Indiana
15378
2010 W.G. Benjey Model 20 series post peeler, 5 HP hydraulic motor, 20" wheel, four 6"
blades. Bought brand new and never put to work. Needs hydraulic power pack. Around
$6,000.00 new with all hydraulics. Always under cover. Like new condition.
$4,500.00
Ontario
16208
Morbark PS8 Post Peeler. PTO drive. All Hydraulic. Some new pats installed including depth
wear plate, feed rolls, hold down springs and 2nd set of knives. $7950.00 US $
$7,950.00
Oregon
13843
2005 Zedco Model WRM-800-200-4-L rounding machine, 75 HP 3-phase power, only run
dozen posts, paid $103,360 new. Includes custom built log deck and infeed/outfeed
conveyors.
$75,000.00
STATE
AD #
Alaska
14568
California (North)
Post Peeler
Power Units, Diesel
671 Detroit diesel power unit, PTO with clutch, 275 HP.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
PRICE (U.S.)
$2,500.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 27
Georgia
16199
Cummins 400 Diesel Engine with W900 Kenworth Truck. Motor in good condition. Truck is
rough.
$3,000.00
Georgia
16149
371 Detroit Diesel engine with extra engine/block assembly.
$1,800.00
Illinois
15866
Deutz BF6L913 with turbo and inner cooler, 1800 hours with twin disk clutch.
$7,750.00
Illinois
15868
Perkins 318, 4 cyl. engine
$1,800.00
Illinois
15867
International 414 engine with turbo and radiator. Low hours. Runs well.
$2,500.00
Indiana
16316
New
230 HP John Deere Engine with clutch and turbo. Powers hydraulic system with 4 open
center pumps: 77 GPM, 66 GPM, 25 GPM, 21 GPM. One pressure compensated pump 60
GPM. Includes reservoir. Good Condition.
$16,500.00
Indiana
15787
671 Detroit electronic turbo skid mounted, clutch, complete
$6,500.00
Iowa
15895
D13000 Cat diesel engine, 129 HP
Updated
$3,000.00
Iowa
15402
John Deere 4039, 96 HP on 2500 rpm, includes radiator, air cleaner and clutch, zero hours
on factory reman. Factory warrenty until January 2015 or 2,000 hours.
$8,000.00
Kentucky
16339
New
V-871 Detroit Diesel. Skid mounted. Twin disc clutch. Industrial 4' X 4' Atlas power unit
radiator. 480 hours on complete rebuild. Extra clean machine.
$3,500.00
Kentucky
15997
3 cylinder Deutz Diesel with clutch. Good running condition.
$3,500.00
Michigan
16068
2800 Allis-Chalmers diesel power unit with 6 cylinders. Used on a mill for 4 years and runs
well. Will sell without clutch for $1200.00 or with clutch for $1800.00
$1,800.00
Michigan
16053
353 Detroit with hydraulic pump not turbo charged
$1,500.00
Michigan
15406
453 Detroit diesel power on its own axle, U-joint for power. Self contained. Runs good.
$2,500.00
Reduced
Michigan
15988
236 Perkins diesel, 4 cyl engine. Stub shaft, no clutch. Engine rebuilt and has 0 hours. Comp
to 75 HP.
$3,500.00
Michigan
14016
Mercedes 30-35 HP 4-cylinder diesel engine with radiator, removed from reefer trailer.
$1,900.00
Reduced
Minnesota
15288
471 Detroit with radiator and new head, water cooled. 60 hours usage since head was
replaced.
$2,000.00
Missouri
16084
62 HP International diesel with speed clutch. Good condition
$3,000.00
Montana
9786
250 Cummins diesel power on its own axle. Less than 100 hours on end frame motor
overhaul. 10-speed transmission w/PTO shaft. Full gauge package.
$2,800.00
New York
14018 Detroit 671 with clutch, new alternator, starts good, runs good. 4000 hours. Skid mounted.
Updated No fuel tank.
$1,500.00
Reduced
New York
15743
6V-53 Detroit, complete with clutch and transmission. Runs good.
$2,000.00
New York
14714
International 360 6-cylinder diese engine, 195 HP, includesautomatic transmission, turbo,
governor, after cooler, 120,000 road miles and 450 shop hours. Mounted in frame on skids.
Runs excellent. $2,600.00. Will sell with option of hand clutch and automatic shutdown for
$4,000.00.
$2,000.00
New York
15559
John Deere 359 Industrial 6-cylinder diesel engine, 847 hours.
$4,500.00
New York
14962
240 Cummins with starter and alternator. Was running fine when removed from service.
$1,600.00
Ohio
15353
Buda 6 cylinder diesel engine
Updated
$1,400.00
Ohio
16270
Diesel Power Unit
$2,500.00
Ohio
15689
International DT 466, no transmission, leaks a little oil but runs good. Serious offers
considered.
$2,500.00
Ohio
15688
International DT 466 with automatic transmission. Serious offers considered.
$3,500.00
Ohio
15625
John Deere 6068H, SN PE6068H550323, maybe 200 hours. $34,000.00 comparable new.
$14,000.00
Ohio
15304
Cummins 6B5.9T 200 HP, includes clutch, 6500 hours.
$7,000.00
Pennsylvania
16207
100 HP Deutz Power Unit. Turbo Charged. Has Clutch and Control Panel. Skid Mounted.
Good Condition.
$4,000.00
Tennessee
16048
Perkins diesel, 6 cylinder 354 with hand clutch, good running condition.
$2,000.00
Tennessee
14420
Lister 6-cylinder diesel engine, air cooled, skid mounted, hand clutch included.
$3,000.00
Reduced
Wisconsin
15972
2 cyl. VM diesel, uses a little oil, has clutch, a V pulley
$1,300.00
STATE
AD #
Power Units, Electric
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 28
Georgia
16059
125 HP electric motor with programmable soft start
Illinois
16027
Electric power unit with attached gear box
Illinois
14797
GE 125 HP 3-phase motor. Good running condition.
$1,050.00
Illinois
14796
Lincoln 125 HP 3-phase motor. Good running condition.
$1,050.00
Indiana
15410
Lincoln 444T 150 HP 3-phase motor, 1780 rpm, 460V.
$1,250.00
Reduced
Michigan
14326
40 HP Worldwide Industrial 3-phase power unit, 230/460V, 3555 RPM, completely enclosed.
$1,150.00
New York
14300
30 HP 3-phase electric motor, like new.
Pennsylvania
16262
20 HP Lincoln, 1750 RPM, 256 T, 230/460 V, 3 Phase Electric Motor. TV 5173. Runs good.
Pennsylvania
15221
Fukuta 20 HP 3-phase motor, 1760 rpm, 22/440V. Only 40 hours. Like new.
$1,000.00
South Carolina
16169
100 HP Electric Motor, 3 phase, 230/460 V, Lincoln 1770 RPM
$1,000.00
South Carolina
16170
125 HP Westinghouse Electric Motor, 3 phase, 460 V, 1185 RPM
$1,250.00
South Carolina
16171
150 HP Electric Motor, EPQ, 3 Phase 230/460 V, 1785 RPM, Frame #445T
$1,500.00
South Carolina
15154
75 HP 3-phase electric motor, 1100 rpm, double arbor.
15968
3 Electric Motors and Components: 20 HP, 3 phase, 1750 RPM, 230 - 460 Volts, 50 to 25
Amps. Motors came off a Baker band resaw. Includes 2 control stations and fuse/connection
box.
$1,500.00
Power Units, Gasoline
PRICE (U.S.)
Wisconsin
$2,250.00
$950.00
$450.00
$850.00
$750.00
STATE
AD #
Illinois
15303
Wisconsin VH4D 4-cylinder, air cooled gasoline engine, 30 HP at 2800 RPM.
$1,800.00
Pennsylvania
14629
Le Roi B201 4-cylinder gas power unit on wheels, 30 HP, crank start, includes reduction
clutch. Runs good. Serious offers considered.
$1,500.00
STATE
AD #
Colorado
13208
Kohler 22 KW genset, hooked up for natural gas with converter for propane, includes
primary/backup converter box, 381 hours.
$2,900.00
Reduced
Connecticut
12162
85 KW Mitsubishi genset, 100 gal fuel tank.
$7,500.00
Illinois
15865
Genset generator take out. Run 500 hours. Model #50DGCH
$2,000.00
Indiana
Power Units, Generators/Gensets
1979 Kohler 260KW 3-phase genset, 325 KVA, with 855 Cummins Big Cam diesel engine,
14965
includes heavy duty block heater.and battery charger that keeps the batterys full even when
Updated
motor is not in use. $8500 obo.
PRICE (U.S.)
$8,500.00
Reduced
Indiana
16222
75 KW Lima Mac Belt Drive Generator. Very Good Condition.
$2,800.00
Indiana
16220
100 KW Lima Mac Belt Drive Generator. Very Good Condition
$3,300.00
Kentucky
15734
150 KW genset, mounted in enclosed box on tandem axle trailer, 471 Detroit diesel engine.
New battery. Only used as backup generator at a pump station. Second genset available
sepaarately.
$10,000.00
Michigan
16336
New
Kohler genset with 1700 original hours. 150 KW. Cummins diesel with 230 or 480 V 3 phase
electric power. Good running condition.
$6,500.00
Michigan
16057
Genset 5,365 hrs - John Deere D4045 165 HP Power Tech 4.5 liter engine with 100 kw Weg
generator wired for 480v 3 phase comes with disconnect. Good condition
$10,000.00
Missouri
13713
250 KVA 3-phase genset, 480V, Cat 400 HP diesel engine.
$14,000.00
New Hampshire
14385
1999 Cat 500 KW genset with Cat 3412 8-cylinder 800 HP diesel engine, 480 volt. Only 125
original hrs on the unit. Perfect condition. Tested. $120,000.00 new. Standby switch gear
available separately.
$65,000.00
New York
16098
Falcon Power Generator with 15 HP Lombardini Diesel, 8000 watts
$2,200.00
New York
15995
1999 Genset, 97 kw 480 3 phase, complete rebuild on 130 HP Deutz engine, 0 hours
$9,500.00
New York
15575
400 KW John Deere Genset, 7100 hours, 1500 hours on total rebuild.
$25,000.00
Tennessee
15980
150 kw cummins genset
$8,500.00
Virginia
16253
400 kw spectrum generator with 635 HP detroit 60 series engine. has little over 7,000 hours.
in excellent condition with 500 gal fuel tank. Also has 1000 amp breaker in enclosure never
used.
$30,000.00
STATE
AD #
Power Units, Hydraulic
PRICE (U.S.)
15374
24 5 HP hydraulic motors with speed controllers, 1" shaft, includes 1/4 mile of 3/8" hydraulic
hose of variable lenghs. Everything brand new. Will sell motors in lots of 5 for $1,000.00
firm per lot or $12,500.00 for everything.
$10,500.00
Reduced
British Columbia
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 29
Indiana
16317
New
230 HP John Deere Engine with clutch and turbo. Powers hydraulic system with 4 open
center pumps: 77 GPM, 66 GPM, 25 GPM, 21 GPM. One pressure compensated pump 60
GPM. Includes reservoir. Good Condition.
$16,500.00
Ontario
15476
50 HP hydraulic power pack 550V
$8,000.00
South Carolina
16032
2 Hydraulic Power Units, 40 HP, electric motor operates hydraulics.
$2,500.00
Tennessee
15162
1981 International DT-466, 150 HP, cranks and runs great, includes 5-speed transmission
with radiator, starter and alternator,
$1,600.00
Tennessee
15163
1987 Internationa/Navistar DT-466, 150 HP, cranks and runs fine, includes inlin injection
pump, Detoit-Allison 5-speecd automatic transmission with radiator and starter.
$1,900.00
STATE
AD #
British Columbia
13074
Dewalt industrial radial arm saw, length gauge stops guide.
Radial Arm Saws
PRICE (U.S.)
Missouri
15011
DeWalt radial arm saw, two 16" blades, additiional 16" and 13" blades that need some work,
7.5 HP 3-phase power 440V,
$1,000.00
Reduced
STATE
AD #
Resaws and Cant Sizers
PRICE (U.S.)
Indiana
15920
Baker Pak Resaw with its own hydraulic system and return belt. No power. Has engine
mount that is ready to set your own engine on.
Pennsylvania
16111
Vertical Sizer
STATE
AD #
Resaws, Circular
PRICE (U.S.)
Pennsylvania
15416
Single head circular resaw, new in 2010, handles material 10" wide x 3" high, includes 4 top
and 4 bottom feed rollers, 2 1/2 " shaft that tapers down 2" for arbor spacers, six 12" blades,
sawdust blower with 4 " outlet, gear box for variable speed feed, roller chain and belt drive,
all roller bearings. Shipping dimensions are 5 ' wide by 8' long. Good condition. No power.
$2500 obo.
$2,500.00
Reduced
STATE
AD #
Resaws, Four Head & Larger
PRICE (U.S.)
Israel
8089
1992 Wood-Mizer 4-head band resaw, currently set up with 15 HP 380-400v 3-phase power,
6" x 8" capacity. Approximately 1000 hours. Original owner. Always inside. Price includes
delivery to an eastern US or Canadian port and either a portion or all of customs duties.
$19,000.00
South Carolina
15388
Kent 8"x8" 4-head band resaw with full length return, includes 20' 3-strand infeed and
unscrambler, 20 HP 3-phase on each head, 32" bandwheels, currently running 1 1/4" x 15'
10" bands, also includes all electrical.
$30,500.00
Wisconsin
16145
2006 Brewco Big Band 4 Head Resaw. Each head has 20 HP 3 phase electric motor. 28"
band wheels. Uses 1", 1 1/4", 1 1/2" bands. No return or hydraulic pack. Does have electric
actuator for head lifts. Approx 15000 hours.
$20,000.00
$900.00
$5,500.00
$2,500.00
STATE
AD #
Arkansas
11298
5' Prescott resaw, 2 extra 10" bands. No power.
$10,000.00
15371
Custom built horizontal/vertical 8"x12" twin band resaw, purchased brand new and never
run, designed to run one vertical and one horizontal band in tandem for resawing cants into
specialty products, 8" live infeed belt with side-press rollers and side belt, 24" bandwheels,
set up for 3" bands, two 25 HP 3-phase motors 550V on the bands, 10 HP hydraulic power
pack.
$13,000.00
Reduced
British Columbia
8513
2002 Polvsen 20"x20" single head band resaw with complete runaround, 28" x 3" thick steel
wheels, runs 1 ½" to 3" blades, 25HP 3-phase, hydraulic seworkst, potentiometer, 24" x 16’
friction infeed belt with variable speed control, weighted hold down wheels for the infeed &
outfeed, resaws down to 1/8" thickness. Includes high capacity resaw transfer system:
Infeed deck assembly consists of 16’ x 16’ x 8’ 3-strand hydraulic infeed deck,5’ x 20’ steel
walkway, 36" x 4 roller arm belt/lifting transfer,14" x 24’ speed belt trough,24’ roller infeed.
Outfeed consists of 5' x 10' 6 roller outfeed table. Belted return trough, 16" x 35’, air kickers
within roller case for returning material, landing table for infeed. Easy to breakdown and
load.
$35,000.00
Indiana
16332
New
Baker Resaw Single Head. 3 Phase Electric. Cuts 6" wide. No return.
$6,500.00
Kentucky
14475
Custom built high production single head band resaw on 14" I-beams, handles 12"x24"
material up to 16' length, variable speed feed, electric setworks, tilting table for lap siding,
20 HP 3-phase power. Usually have to slow it down so offloader can keep up.
$10,500.00
Kentucky
16043
Fast Line Gator, model 125, single head resaw with return, hydraulic drive, good condition
$8,500.00
15247
2009 Wood-Mizer HR-120 single head band resaw, new front and rear rolls, 10 HP single
phase, includes 40' of electric cable for inside or outside sawing. Bought new, never used.
Still on the pallet.
$8,750.00
British Columbia
Maine
Resaws, Single Head
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 30
Michigan
15541
Morgan single head band resaw with customized complete runaround, customized by
Morgan to handle cants 20" high x 16" wide, produces up to 6" cants, adjustable infeed
speed. No power.
$20,000.00
New York
14605
2011 Wood-Mizer HR-120 single head band resaw with return, 10 HP single phase electric
$10,500.00
Nova Scotia
12086
Yates 48" single head band resaw, 40" bandwheels, pineapple infeed, tilts to produce siding,
40 HP. Includes 10 HP blower.
$7,000.00
Pennsylvania
14882
Morgan 6"x6" single head band resaw, 20 HP electric with blower, no return, deadroll
rollcase to DeWalt radial arm saw 5 HP
$6,000.00
Pennsylvania
15456
GoFast 6"x8" single band resaw, 24 HP Honda gas engine, modified to accept 6"x10"
material and with double rubber-wheel hold-down. No return.
$5,500.00
South Carolina
15390
Walling 8"x12" single head band resaw with return, hydraulic feed, 15 HP 3-phase.
$5,500.00
Texas
7554
Customized high production resaw, air over hydraulic, modular, precision machined, 20 HP
3-phase w/soft starts. Handles 9"x17" cants. Cuts down to 3/4". Includes 36" bandwheels, 7
feed rollers, 3 top-mounted holddown pressure rollers, and all electrical.
$8,500.00
Wisconsin
16123
Morgan single head resaw, line shaft ready, 6 x 12 capacity
$3,600.00
Wisconsin
15737
2006 GoFast Up Country grade resaw system with complete runaround; 50 HP 3 phase on
saw, 15 HP 3 phase on hydraulics. Running daily and can demonstrate.
$45,000.00
STATE
AD #
Kentucky
15741
STATE
AD #
Resaws, Three-Head
Brewer Golden Eagle 3-head band resaw with complete runaround, includes Keystone cant
sizer head and Brewer deduster. Everything in excelllent conditon. No power.
Resaws, Two-Head
Minnesota
16132
High Point - over and under double head resaw. Has 12" wide belt. Capacity is 12" X 10"
cants. Has custom built return. Line shaft ready. Fair condition.
Pennsylvania
16138
Keystone double arbor resaw w/ sizer head includes blades and spacers. 100 HP electric
motor
STATE
AD #
Resaws, Vertical
PRICE (U.S.)
$28,500.00
Reduced
PRICE (U.S.)
$7,000.00
$30,000.00
PRICE (U.S.)
California (North)
3424
1990 Forrestor 900 vertical band resaw, 36" wheels, 4" bands, 3-phase electric, customized
linebar, handles 12"x12" cants. No runaround. Produces 7000 board feet or more daily.
Oregon
15740
Turner 42" vertical single head band resaw, 50 HP 480 volt motor with belt drive, no infeed
or outfeed. Mounted on steel frame. Includes tilting table all rebushed, ACME screws
replaced, rolls faced, each of four rolls has independent hydraulic motor.
$12,000.00
South Carolina
16179
60" Turner Resaw. Good Heavy Wheels, Center Cut, Offset cut, and Tilt Cut.
$7,500.00
South Carolina
16205
36" Robinson Resaw, 20 HP motor, 230/460 V.
$3,750.00
STATE
AD #
California (North)
15028
Ripsaw, power feed, 3 HP 3-phase, 12"carbide blade, fence moves by manual lever.
Louisiana
12752
Mattison 202 16" straight line ripsaw, 220 V 3-phase,
$5,500.00
New Jersey
15643
1972 Diehl Model 75 ripsaw, includes three 18" blades, 15 HP 3-phase,
$3,000.00
Reduced
New York
10583
Yates American 14" straight line ripsaw, 10 HP single phase.
$2,500.00
Pennsylvania
16005
Diehl Model SL52. 3 phase 220/440. Single blade, straight line rip blade, 3-phase, Still
operating,
$3,500.00
Pennsylvania
13427
Straight line ripsaw, vertical arbor with horizontal 10" blade, hydraulic power, pneumatic
feed, includes outlets for sawdust blowers. Designed to cut stringers for pallet stock and
survey stakes. Power unit not included. Around 100 HP power requirement.
$6,500.00
Vermont
14927
Mattison 202 straight line ripsaw, variable speed feed, new track and chain. Rips up to 4"
depth and 36" width. Can see running.
$2,500.00
Reduced
Wisconsin
14697
Marion straight-line ripsaw, good condition, includes infeed chain, lineshaft ready.
$3,500.00
Reduced
STATE
AD #
British Columbia
15705
12’ x 26" 5 strand UNHMW live roller deck, includes lifting motor and drive motor.
$4,500.00
14053
Helle rollcase, hydraulic drive, 24" wide by 20' length, 6" rollers, using as sawmill outfeed
roller
$1,500.00
Ontario
STATE
AD #
British Columbia
13070
Ripsaws
Roller Beds
Sanders
Cantek single drum 24" wide belt sander, 1/8"to 5" capacity.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$5,000.00
PRICE (U.S.)
$750.00
PRICE (U.S.)
PRICE (U.S.)
$4,500.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 31
New York
10594
Solem 32" drum sander, 3 drums, 8000# shipping weight, conveyor, 3-phase power. 4'x6'
footprint . Works like a planer but uses abrasives. Good for finishing sander for furniture,
millwork, doors.
$4,500.00
Pennsylvania
15896
Time Saver Speed Belt Sander, 36" wide belt, 75 HP electric motor, hydraulic power pack,
good condition
$16,500.00
STATE
AD #
Arkansas
11944
Matthews Blow Pipe size 1523 sawdust blower, 14" inlet, 13" outlet, 29" fan.
Sawdust Blowers
PRICE (U.S.)
British Columbia
13069
Sawdust system: Dayton 22" sawdust blower with 20HP drive, 20" uptake blower pipe,
around 75' of 6" to 12" sawdust piping, 5" dia x 22’ fine sawdust Cyclone with stand. Easy to
breakdown and load.
$8,500.00
Illinois
14654
Jacksonville sawdust blower, 25" inlet, 25" outlet, 54" fan 54" diameter x 18" wide, 2 7/16"
shaft. Excellent condition. No power. 150 to 200 HP power requirement.
$2,500.00
Indiana
14488
36" sawdust blower, no power
Indiana
14486
36" sawdust blower w/50 HP motor
Kentucky
16242
Trailer Loading Blower
Kentucky
15827
Blower and big blower pipe, about 200 feet, 16 in diameter
$900.00
$750.00
$2,000.00
$500.00
$2,000.00
Michigan
11097
Phelps chip blower, 20 HP 3-phase. Two available. $500.00 each.
New York
14907
LeRoi sawdust blower, 6" inlet and outlet, includes piping, 20 HP 3-phase.
New York
15261
Cornell 42" sawdust blower, 18" round inlet, 12"x12" square outlet, no power.
Ontario
12372
TimberWolf sawdust blower, 6 inlet, 6" outlet, 1300 cfm, 3 HP 220 V. Original owner. Still
brand new. Never used.
$1,000.00
Pennsylvania
16110
Large Blower. 26 inch side opening. 24 inch top opening. 4' fan. No power
$2,500.00
Pennsylvania
15025
Chip blower, 48" fan, 21" intake, 19" outlet. No power
$650.00
Pennsylvania
15901
Reckart 26" sawdust blower with steel pipe and elbow
$695.00
South Carolina
15156
Phelps Model H 48" sawdust blower, flat belt drive
$1,000.00
Vermont
14928
Whirlwind sawdust blower, 8" intake, 6" outlet, at least 40' of heavy plastic piping, 15 HP
3-phase.
$700.00
Reduced
Virginia
16257
Reckard 36 inch dust blower
$3,500.00
STATE
AD #
Idaho
16034
Extrema DC-3,000 dust collector that’s never been used, miscellaneous spiral pipe
Sawdust Collectors
Maine
16284
DUST COLLECTION SYSTEM made by Dust Technology Inc. Made in USA model #RAL.
Three bin collectors and Four bin collectors. Complete system-with various piping and all
magnetic starters and boxes.
STATE
AD #
Massachusetts
16314
14" WIDE STICKER BELT
Michigan
15815
Hobart Gen Style welder 200 amp, 3PH 220-440 volt
STATE
AD #
Arkansas
14284
Michigan
Minnesota
Missouri
Sawmill Components
$500.00
$1,500.00
$750.00
PRICE (U.S.)
$500.00
$3,000.00
PRICE (U.S.)
$415.00
Saws
56" headsaw, hammered for left hand.
$200.00
PRICE (U.S.)
$750.00
16216
Upright Band Mill with 36" Throat, 3/4" Blade, 3 Phase Motor. As is.
Updated
15290
54" headsaw, hammered for right hand,
15319
2 circular saws: Foley Belsaw 46" blade in excellent condition, 48" older blade that needs to
be hammered. Both blades have F style changeable teeth. Includes tooth changing tool and
100 extra new teeth.
$750.00
$600.00
$1,500.00
Missouri
9752
56" inserted tooth headsaw, good condition
$900.00
New York
15263
48" circle blade, hammered for right hand
$500.00
Vermont
14316
52" inserted tooth saw, hammered for right hand. Price firm.
$550.00
Reduced
STATE
AD #
Kentucky
15228
STATE
AD #
Scissor Lifts
PRICE (U.S.)
Scragg Mills, Band
PRICE (U.S.)
Scissor lift, 4,x8', 1000 lb. capacity.
$2,000.00
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 32
Maine
14159
1998 FastLine 4-saw band scragg, 1 1/'2" bands, sharp chain, setworks open from 4" to 12",
live 3-strand 16' infeed deck, automatic log turner, laser lights on second set of blades,
sawdust blower with piping, handles logs up to 24" diameter x 16' length. Can process 1500
4x4's per daily shift and 600 to 700 railroad ties per daily shift, more with automation.
Original owner. Equipment footprint of 12' width by 60' length. Two flatbeds required for
shipping. $140,000.00 new.
South Carolina
16175
Shop Built, 3 Band Saw Scrag Mill, 3-15 HP motors pulling band, 1 - 15 HP motor pulling
hydraulic pack. Trailer, 8' x 20' Dovetail 3 single axles with pineal hitch. Additional
$2100.00
STATE
AD #
Scragg Mills, Circular
$85,000.00
$4,200.00
PRICE (U.S.)
Indiana
16326
New
Morgan mini scragg mill -mounted on trailer so it is 100 percent portable, 2 in. Ball. -four
cylinder Perkins diesel power unit, belt drive to the saws. -saw from 3 1/2 to 10" wide. -two
forty inch inserted tooth saws. -hydraulic sharp chain feedworks. -will saw up to twelve feet
long, works better on small logs. -excellent running condition.
Kentucky
16039
Morgan Scragg Mill, 20' live infeed deck, hydraulic power pack, hydraulic end dogging, 130
HP John Deere diesel, 26" sawdust blower, extra set of blades, miscellaneous parts
$52,250.00
Kentucky
7354
1997 Cooper sharp chain scragg, computer control w/auto setworks, outfeed w/optical auto
centering, two 48" blades, extra set blades, cab w/heat a/c. 480 v 3-Phase. Better on 12' or
less in hardwood and longer on straight softwood. Low usage. Can see running.
$100,000.00
Louisiana
15131
Custom built scragg mill, sharp chain, handles logs 20' length x 20" capacity, automatic
reverse for second cut, heavy built on 12" frame, missing setworks, outfeed roller bed,
followed by Miner 6"x36" double bay gang edger, sawdust chain, maybe 50-60 carbide
tipped blades, 150 HP Chrysler industrial gas power unit.
$8,000.00
Reduced
13399
High production scragg mill, 30" blades with hydraulic controls, with bull edger with 24"
blades, portable on dual axle trailer, sharp chain, opens to 10" width, power infeed rolls,
power outfeed slab rolls, 40' length, 17 ton vehicle weight, 300 HP 1940's diesel engine.
Needs some work. Originally set up as 5-man operation. Was producing 15,000 board feet
on average per shift.
$9,500.00
Manitoba
Nebraska
16064 Morgan Scragg Mill: 30" circle blades, sharp chain, hydraulic adjustable blades, diesel
Updated Lamborghini engine, trailer package. Cuts 9' logs, 14' log deck. Can demonstrate.
$14,900.00
$18,500.00
12084
PHL 16' circular scragg mill with cab and SilvaTech computer setworks, sharp chain, infeed
and outfeed conveyors, two 50 HP motors. Handles logs up to 14" diameter x 16' length. Can
see in operation.
$33,500.00
Pennsylvania
14880
Scragg mill operation: 30' HMC hourglass rolls with hold down and up log kicker, CTR 40
slasher saw mounted on hour glass rolls; all hydraulic driven. 22' short log deck 34" wide,
custom built 2-saw scragg mill, sharp chain, 36" blades, handles logs 16" diameter x 6'
length, hydraulic power, extra set of blades, extra teeth, Jockey grinder, 3' deadrolls, cants
move to 16" ripsaw/splitter saw with laser light and live infeed, slabs move to 2-saw 8" wide
slab edger with 16" blades and live infeed; all with blowers.
$23,500.00
Saskatchewan
9979
Circle scragg, sharp chain, portable, 36" blades on double arbor, Chrysler gas powered
combine engine. Currently set for 6' length but can be easily adjusted to handle up to 16'
length.
$14,000.00
STATE
AD #
Kentucky
16233
Shaker Screen - Fulghum 8 X 8 Chipscreen. Good condition.
$3,000.00
Kentucky
13548
Fulghum 5' x 5' double shaker screen with 5' round hopper, 3 HP 3-phase power 230/460
volt, 1 1/2" top screen and 5/8" bottom screen.
$4,500.00
Utah
15512
Soderhamn 6"x6" chip screen, 2 sets of screens 1" and 2"
$3,500.00
Reduced
Nova Scotia
Screens
Setters
PRICE (U.S.)
STATE
AD #
Pennsylvania
15808
STATE
AD #
Michigan
16009
Vollmer - Band Saw Blade Sharpener
$4,000.00
New Jersey
16073
Cook's Sawblade maintenance equipment. Auto blade sharpener, dual tooth setter, and
single tooth setter.
$2,000.00
South Carolina
16168
Michigan Knife Grinder. Good Condition.
$3,500.00
STATE
AD #
Wood-mizer single tooth bandsaw setter
Sharpeners and Grinders
Sharpeners, Moulder/Planer Knives
New York
15681
Michigan Model 480 knife grinder for planer knives. 48" capacity, 460V 3-phase or 220V
with electrical box.
South Carolina
15671
Newman G130 knife grinder, good condition, 2 HP and 5 HP 220/440 V motors
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
$150.00
PRICE (U.S.)
PRICE (U.S.)
$3,900.00
$2,200.00
Reduced
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 33
STATE
AD #
California (North)
15902
Dino bandsaw profiler 12 V and tooth setter. Good operating conditions, all parts included
except a grinding wheel.
Illinois
16343
New
Logosol Grindlux 4000 12 V automatic sharpener on stand with manual setter.
Missouri
15549
Automatic sharpener, 110V, with manual setter, includes 1 brand new cam.
STATE
AD #
Arkansas
11303
Armstrong #17 grinder with 2 cams. Also sharpens trimmer and edger saws.
$1,500.00
Illinois
14223
Filing room equipment: Two Armstong air sweges for wide bands 6" or wider, Armstrong
shaper in good condition. Serious offers considered.
$2,000.00
Reduced
Virginia
12273
Two #220 Hanchett left hand grinders with stands. One #230 Hanchett right hand grinder
with stands.
$4,000.00
Wyoming
10685
Hanchett #5 sash gang grinder, 3-phase power.
STATE
AD #
Alabama
15246
Severson shavings mill, designed to produce complete curl shavings from 6" and smaller
wood waste and scraps. 10 HP 3-phase. Low hours.
$14,000.00
Kentucky
15674
Newman SS-24 scrap wood shavings mill, 5"x14" throat, 100 HP 3-phase, includes shaker
conveyor and knife sharpener
$40,000.00
13264
2008 Salsco 40" shavings mills, 9' long box, 100 HP 3-phase electric upgraded to sit along
the side of the machine as opposed to the end, eliminating several belts, bearings, and
sheaves. Box feed powered by 15 HP 3-phase motor. Heads upgraded from original Salsco
heads to 40" wide x 10" diameter with 12 rows of knives and use regular 5/32" planer knives
with square head set screws. Excellent condition. A second shavings mill built exactly the
same also available. $65,000.00 each or $120,000.00 for both.
$65,000.00
Michigan
15739
Custom built shavings mill, built heavy duty, box handles logs 8' length x 36" diameter, 2
heads 4 blades each, 2-strand 30' log deck with stop & load, 10' elevator, knife sharpener,
currently hooked up with hydraulics to lineshaft but could change to diesel or electric power.
Produces around 2 to 2.5 tons or 50 cu. yards daily.
$45,000.00
New York
14604
2009 Jackson Lumber Harvester Model 16P4, 80 HP International diesel power unit,
includes extra knives, knife grinder and sawdust blower. Original owner. Maybe 800 hours.
Producing 6 to 10 cubic yards per hour, depending on the logs.
$40,000.00
North Carolina
15951
2008- 40'' Salsco Shaving Mill. 127 Hp Caterpillar engine, 960 hrs., 2 sets of knives, 9'
hopper, 32' electric conveyor, 8' electric conveyor, 6'x13' log bunk with air piston loader.
Great condition
$44,000.00
Reduced
North Carolina
14684
Salsco 150' shavings dryer, 3 50' conveyors working in tandem, with mesh conveyor, 6' wide,
3 fans, 3 Blue Line propane heaters. Maybe 400 hours on the dryer. Includes shaker screen,
12" auger, and all electrical from the wall to the mill. Everything in excellent condition.
$150,000.00 comparable new.
$70,000.00
North Carolina
14883
2010 Salsco 30" shavings mill, 90 HP Cat diesel engine with turbo, Only one year of running
time. Kept under cover. Includes conveyors without power.
$47,000.00
Ohio
16230
Jackson Lumber Harvestor Wood Shaving Mill model 30D10. No power but made for diesel.
Chain drive. Has blowers, pipes, extra set of knives. Low hours. Produces approx 400 -500 cf
per hour depending on conditions. Box size is 27" X 54".
$30,000.00
Pennsylvania
15369
2003 Jackson Lumber Harvester Model 164D shavings mill, 30 HP 3-phase on the mill, 30
HP 3-phase hydraulic power pack, shavings box upgraded from chain to hydraulic, includes
6 sets of knives and Grizzly knife sharpener. Excellent condition.
$17,000.00
Reduced
Pennsylvania
16045
2011 Salsco 30" shavings mill with 91 HP Cat diesel engine. Hydraulic. Tandam axel,
Portable. Approximately 550 hours.
$45,000.00
Pennsylvania
15953
2009 Custom built shaving mill with 2 - 30" heads, 6' box, 50 HP electric motor, includes set
of knives.
$18,000.00
Utah
13696
2008 custom built shavings mill, 54" long box 24" wide 24" deep, 25 HP 3-phase motor
drives a single 6" diameter 4-knive head. Knives are super easy to replace.
$19,000.00
Reduced
Vermont
15975
2010 Salsco 60" shavings mill, 200 HP John Deere Model 6068 diesel power, 60" x 9' box,
extra 30" knives, 1900 hours on the shavings mill. Includes set of 3 conveyors: Salsco 25"
wide x 22' length, 25" wide x 14' length, and 25" wide x 10' length conveyors, Salsco outfeed
conveyor 10" wide x 25' length with hydraulic drive, and more conveyors included.
Everything in excellent condition. $160,000.00 comparable new.
$65,000.00
STATE
AD #
Shingle Mills
PRICE (U.S.)
Kentucky
Sharpeners, Narrow Band
Sharpeners, Wide Band
Shavings Mills
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
$850.00
$1,100.00
$1,250.00
PRICE (U.S.)
$2,500.00
PRICE (U.S.)
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 34
British Columbia
15363
1850's Sumner shingle mill with trim saw, all belt driven, needs some work but has plenty of
replacement parts. Includes sharpener, gummer, knee bolter saw for cleaning the blocks
before the shingle saw gets to it. Also includes new stellite headsaw and trim saw blades.
Powered by 466 International diesel engine. Serious offers considered.
Maine
13214
1979 Desjardens shingle mill, wood frame, two 38" vertical solid tooth shingle saws with
collars, 2 edging saws, buncher. Produces 38" or 1/2" shingles. No power, 35-40 HP power
requirement. Only produced 50 shingles.
$5,000.00
Massachusetts
13325
1997 Desjardens RE-86X hydraulic driven shingle mill, hydraulic power with 112 HP Perkins
diesel engine, 38" horizontal inserted tooth blade, steel frame, sawdust blower, trough
outfeed conveyor. Low hours on everything. Always under cover. Excellent condition.
Produces up to 84 bundles daily with two operators.
$23,000.00
STATE
AD #
Skidders
PRICE (U.S.)
$6,000.00
Reduced
New York
16070
1980 Timberjack 230 Cable Skidder. Like new tires: Size - 23.1 X 26. New crate motor,
Detroit 353 diesel. Nice machine. Motivated seller.
Ohio
16088
Log Skidder: 1986 John Deere 740 Cable Skidder. Includes set of chains and spare tire.
Good condition.
$25,000.00
Pennsylvania
16016
Cable Skidder: 1997 Franklin Skidder, model 170, diesel with new tires and new engine
(500 hours), has a cable with a winch.
$29,000.00
Tennessee
15982
450C Timberjack skidder, cab, grapple, winch
$16,000.00
STATE
AD #
Slab Saws
PRICE (U.S.)
Michigan
16051
Cornell Automatic Slab Saw. Has 20 HP on head saw and 3HP on hydraulics. Fair condition.
In operation.
$6,000.00
$25,000.00
STATE
AD #
Slasher Saws
PRICE (U.S.)
Georgia
13450
CSI DL4400 slasher saw, includes new reversible deck. 59" saw bar, plumbed for hydraulics.
$9,500.00
Ontario
15477
Slasher saw with cab,seat and joystick controls, all hydraulic hose and fittings for 7
functions, 48" carbide insert tooth saw with swing mechanism, two log holddowns. No
power.
$5,000.00
STATE
AD #
Stacking Decks
2004 Pendu 4600E Board Stacker, variable speed feed, hydraulic power, stacks up to 4,000
boards per hour depending on the size of the material being stacked, handles from 1/4"
boards up to 6'x8" cants. Designed to stack material produced on gang saws and resaws.
Purchased new but never set up. Still just like new.
PRICE (U.S.)
Indiana
14221
STATE
AD #
Idaho
15856
Barber Stake Pointer that has been factory reconditioned. Comes with 4 - 14" blades, will
point 1X1 up to 2X12, it can point any length with table extension. You can change height
and angle of the points.
$11,500.00
Wisconsin
15601
Complete stake mill: Chisel pointing line includes Holtec Trans-Cut II package saw, 6' bar,
Keystone chisel pointer, air driven,15-HP 3-phase power. Pencil pointing line includes
Keystone pencil pointer, air drive, all manual, 5 HP 3-phase, Delta-Rockwell radial arm saw,
1.5 HP single phase 220V. Operation includes Gang ripsaw, 4" x 16" capacity, with several
sets of 7" through 12" blades, spacers, hydraulic feed rolls, 20 HP 3-phase on drive, 5 HP
runs hydraulics, Keysatone 16" x 6' infeed roller table with holdover arms, outfeed to 4'x8'
sorting table, four rolling carts, Gerrard G-2000 plastic bander, steel bander, stretch
wrapper Yates-American table saw, 10" blade, 1.5 HP 3-phase, Yale 5000# forklift,
spreadable forks, pnuematic tires, pallet jack, dust collection system with cyclone, 16"
infeed, piping. Phase converter avaialbe for single phase operations.
$45,000.00
STATE
AD #
Table Saws
PRICE (U.S.)
Minnesota
15229
Yates table saw, bearings in excellent condition, 18" blade, fine-adjusting capability, 40"
wide ripping capacity, 5 HP 3-phase power, handles up to 5 1/2" material. 1500 lb. transport
weight.
$950.00
STATE
AD #
Tenoners
PRICE (U.S.)
California (North)
11351
Jenkins Model 90 double end tenoner, handles from 15" to 8' length, 3-phase power, most
electrical included.
$6,000.00
Ohio
15401
2004 Dyna SD60 Super Duty single end teneoner with Dyna drill press, produces spindles
from 3-1/2" to 6" diameter, drill press adjusts for angle drilling, lineshaft ready. Original
owner.
$10,000.00
STATE
AD #
Massachusetts
Stake Mills
Tilt Hoists
16312
4 ARM SANBORN TILT HOIST 4' PRICE Make Offer - Broken
Updated
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$20,900.00
PRICE (U.S.)
PRICE (U.S.)
$1,000.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 35
STATE
AD #
Trailers
PRICE (U.S.)
California (North)
14133
Two 40' chip trailers, one with drop floor and spread axle, one with chip tailgate and sliding
rear axles
$2,000.00
Kentucky
16244
Walking Floor Trailer. 2014 year. 53 Feet. Used very little.
$65,000.00
Missouri
15823
2002 Trailer with these specs: 29,5000 lb with 5,900 lb hitch load and load capacity 19,900
lb; Electrical - sealed modular wiring harness with LED lights; Frame - 12 in. pierced i-beam
with 3 in. crossmembers 16 in. on center; Tires - 235/80 R16 LRE (3097lb); 2 in treated
wood floors, adjustable pintle eye - coupler, heavy duty safety chains, 60 in X 24 in. heavy
duty flip up ramps with spring assist; deck length - 25 ft flat + 5 ft dovetail; all wheel
electric brakes, single 12,000 lb drop foot jack; 2 - 10000lb oil bath axles; toolbox - chain
box with lockable lid standard; slipper springs suspension; finish - primed, 2 coats of
automotive grade enamel
$6,000.00
Pennsylvania
15619
1992 Transcraft 45' flatbed trailer, split tandem axle.
$2,900.00
Reduced
South Carolina
16176
Trailer, 8' x 20' Dovetail 3 single axles with Pinal Hitch. Include scrag mill for $4200.
$2,100.00
Tennessee
16113
40' LMI open top dust trailer
STATE
AD #
Kentucky
$14,000.00
Transfer Decks
15227 20' 3-strand cant transfer deck with unscrambler, 5 HP 3-phase on the deck, 3- HP 3-phase
Updated on the unscrambler.
Virginia
16255
STATE
AD #
10ft heavy duty 4 strand transfer deck with drive an 5 HP motor
Trim Saws
PRICE (U.S.)
$5,000.00
Reduced
$2,500.00
PRICE (U.S.)
9870
20' double end trim, 1 stationary 20" saw, air adjustment on other 20" saw, 5 HP 3-phase
motors on each saw.
$3,000.00
British Columbia
13067
Twin 16" Hula saw system consisting of 24’ x 12" roll case with stops, length gauge, air
kickers, mac valves ,24’ x 16" drop conveyor belt, 6 strand 8’ x 20’ H78 camel back infeed
transfer deck, 7.5HP drive with radicon reducer, two 4’ x 8’ x 20" block bins. Easy to
breakdown and load.
$12,000.00
Louisiana
15241
Morgan 2-saw 20" trimmer, variable speed, 3-phase power.
$3,500.00
Maine
14202
20" trim saw, handles material 8" width and 3" depth, 3-phase power
$1,000.00
Reduced
Mississippi
11444
Browning double end trim, adjustable cut up to 48", 7.5" saws, live infeed belt, includes
3-phase motors on each saw and drive motor. No infeed or outfeed decks.
$1,450.00
North Carolina
11051
Falcon Machinery 24" drop multi trimsaw, allows for 6 saws 2 end trim and 4 bucking
locations in between, handles boards up to 20' length. 5 HP 3-phase on each saw. Includes
infeed and outfeed chain.
$12,500.00
Oregon
15598
Double end trimmer, adjusts from 8' to 14'. 4" heavy duty tubular steel construction. Two
7.5 HP 3 phase motors run fine, 1 HP feed motor. Blades not included.
$2,500.00
Reduced
Pennsylvania
11237
1999 Newman multisaw drop trimmer, completely automated, currently sawing 6"x6" cants,
live infeed chain, live slab/sawdust chain, three-phase motor on each saw position. Operated
only for 4 years. Original owner.
$13,000.00
Pennsylvania
11639
Cornell automatic 2-saw trimmer, 18" blades, 3-phase power with hydraulic power packs.
$7,000.00
Pennsylvania
11640
Automatic adjustable 2-saw trimmer, similar to Cornell, 18" blades, 3-phase power with
hydraulic power packs.
$3,000.00
Virginia
16256
Cornith 2 saw trimer
$4,000.00
Wisconsin
14069
Irvington 16' V-line drop-down trim saw, 8 saw units with individual levers, 14" saws, first
saw is adjustable, infeed table, outfeed waste conveyor, 3 HP 3-phase 440V on each saw,
separate infeed and outfeed motors. Can demonstrate. 7200 lbs. shipping weight. Always
kept indoors.
$4,250.00
Reduced
Alabama
STATE
AD #
Georgia
15915
International Log Truck for off road use only. Has good 671 Detroit engine.
$1,500.00
Georgia
15916
Cabover GMC with good 250 Cummins, 10 speed transmission
$1,500.00
Pennsylvania
11342
1974 Mack Interstater, 237 motor, 5-speed, 387 Mack rearends, motor completely rebuilt,
custom rolled and pleated interior, drive tires are all new recaps.
$3,000.00
STATE
AD #
Oklahoma
8678
Trucks
Truss Manufacturing
Clary Craftmaster Model 310 component saw for truss manufacturing, Serial 310.090044.
Includes 4 blades (two 14", one 16", one 28") on separate arbors and three movement
motors, 35' track. All 3-phase. Appears 100% complete, even control box is present. Towing
requirement 20' bed or longer.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
PRICE (U.S.)
PRICE (U.S.)
$2,000.00
TOLL FREE:
800-459-2148
WWW.SAWMILLEXCHANGE.COM
Wisconsin
16160
STATE
AD #
SAWMILL EXCHANGE
P. O. BOX 710930
HOUSTON, TX 77271-0930
8/29/14
PAGE 36
Truss Rafter Saw with electric motor and 2 16" blades. Extension rollers and stops on both
sides. Press Roller - rafter roller has 2' diameter rollers and 14' length, Extension rollers in
back and front of press roller.
Unscramblers
$14,000.00
Reduced
PRICE (U.S.)
Alabama
13785
Mellott cant deck 10' wide x 16' long 1 HP 3-phase 240/480 V with Mellott lumber
unscrambler, 3 HP 3-phase 240/480 V, electrical runs through gear box.
Kentucky
15828
Heavy duty unscrambler.
$3,500.00
Pennsylvania
16139
Unscrambler
$4,000.00
Wisconsin
13839
Brewer 4-strand board unscrambler, 8' width, 5 HP with gear box and double reducer
$3,500.00
Reduced
STATE
AD #
Indiana
15911
STATE
AD #
Oregon
15209
STATE
AD #
Window Manufacturing
PRICE (U.S.)
14848
Remaining components of small-scale window-making operation: Shop-size bandsaw, 2 HP
3-phase, Crescent Hollow chisel mortiser, 1 HP 3-phase, Window manufacturing machine, 5
HP 3-phase, Jointer, 3 HP 3-phase, Table saw, 14" blade, tilting table. 15 HP 3-phase.
$8,500.00
Pennsylvania
Vacuum Pump
2001 40 HP Quincy Vacuum Pump with control panel and cooling radiator with fan, 29,000
hours
Veneer Clippers
1996 Silver Eagle Model 72/602 veneer clipper, SN W69699, hardly been used, purchased
for cutting multiple layers of recycled paper and didn't work very well. Works very well for
veneer as intended. Footprint is 4' wide x 9' long x 106" tall. Includes resharpened 75" long
blade and spare blade, hand tie valves, new air hoses. Tested and ready to go.
STRAIGHT TALK AND SAWMILLS... THAT'S WHAT YOU GET FROM SAWMILL EXCHANGE
$3,400.00
PRICE (U.S.)
$5,000.00
PRICE (U.S.)
$3,250.00