Download Report

dk;kZy; lgk;d vfHk;ark ¼oS0½
yks0fu0fo0 oS0vuq0mieaMy ,e&2523 ¼fn0l0½
yky cgknqj “kkL=h vLirky] f[kpM+hiqj]
fnYyh & 110091
No. 19(6)/AE (E)/PWDEMSD-M2523/2015-16/241
Dated:- 16.04.2015
(Quotation)
dqVs”ku vkeU=.k lwpuk@ Notice Invitation Quotation
Hkkjr ds jk’Vªifr dh vksj ls fuEufyf[kr “krksZ ij ------------------------------------------------------- fd iwfrZ ds fy, eqgjcUn nj dqVs”ku
vkefU=r dh tkrh gSA nj ¼dqVs”ku½ bl dk;kZy; esa fnuk¡d 20-04-2015 dks vijkgzu 3%00 cts rd igq¡p tkuh pkfg,A
Sealed Quotation are invited on behalf of President of India by AE(E) M-2523/Lal Bahadur Shastri
Hospital, Khichripur, Delhi on item rate basis from the Approved and eligible registered/Annually Pre
Qualified Contractor of CPWD in appropriate category of “EI ” for the items noted supply/work so as to
reach to undersigned on before 20/04/2015 by 3:00 PM.
ftUgsa mlh fnu vijkgzu 3%30 cts [kksyk tk,xkA
The Quotation shall be opened on the same day at 3:30 PM.
AE(E) M-2523, PWD EMD M-252 ds fy, nj ¼dqVs”ku½ fnuk¡d ------------------------------ rd izkIr “kCn fyQkQs ij vo”;
fy[ks tkus pkfg,A
The Quotation should be subscribed “Electric work in camp office of Deputy CM(GNCTD) at Gurudawara
Road, Khichripur,Delhi” due on 20.04.2015
dk;Z dk uke%
Name of work:-
MOEI & Fans i/c street lights sewage & drinking water pump sets for DA
staff Quarters at Kalyanwas Delhi.
(SH: Electric work in camp office of Deputy CM(GNCTD) at Gurudawara
Road, Khichripur,Delhi)
S.N.
1
Item of works
Qty
Rates
Per
Amount
Schedule of works i/c terms & conditions, attached.
Total
Terms & Conditions
1. Only Approved and eligible registered/Annually Pre Qualified Contractor of CPWD in appropriate category of “ EI” are eligible to quote
the quotation.
2. Intending firm shall submit their quotation in two envelop system. Envelop A shall contain their authenticated proof of Registration in EICategory, Valid Electrical License, Copy of DVAT and upto date VAT Return, Undertaking in the letterhead of the Agency and EMD.
Envelop B shall contain their price bid /offer.
3. Envelop A shall be open first and after verification of authorization and registration in DVAT with upto date VAT return, and EMD failing
which the quotation/Price Bid will not be opened and summarily rejected.
4. Envelop B shall be opened after verification of documents in Envelope A.
5. Rates quoted shall be inclusive of all taxes and cartage etc.
6. Quotation can be downloaded from Delhi Govt. website www.delhi.gov.in
ASSISTANT ENGINEER (E) 2523
PWD EMD- M 252, (NCTD),
L.B.S. HOSPITAL, DELHI
Copy to :1. The Executive Engineer (E) PWD EMD M-252, MSO Building, New Delhi for information please.
2. Notice board AE(E)M-2523, LBSH, Khichripur, Delhi
3. Web site :- www.delhigovt.nic.in
ASSISTANT ENGINEER (E) 2523
Schedule of Work
Name of Work:- MOEI & Fans i/c street lights sewage & drinking water pump sets for DA
staff Quarters at Kalyanwas Delhi.
(SH: Electric work in camp office of Deputy CM(GNCTD) at Gurudawara
Road, Khichripur,Delhi).
S.
No
1
Description of Work
Qty
Rate
Unit
Wiring for light point/ fan point/ exhaust fan
point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in
surface / recessed medium class PVC conduit,
with piano type switch, phenolic laminated
sheet, suitable size M.S. box and earthing the
point with 1.5 sq.mm. FRLS PVC insulated
copper conductor single core cable etc as
required.
a) Group C
26
Point
2.1
Supplying and drawing following sizes of FRLS
PVC insulated copper conductor, single core
cable in the existing surface/ recessed steel /
PVC conduit as required.
a) 3 X 1.5 sq mm
50
Mtr
2.2
b) 6 X 1.5 sq mm
20
Mtr
2.3
c) 3 X 4 sq mm
30
Mtr
2.4
d) 6 X 4 sq mm
50
Mtr
3.1
Supplying and fixing of following sizes of
medium class PVC conduit along with
accessories in surface/recess including cutting
the wall and making good the same in case of
recessed conduit as required.
a) 25 mm
150
Mtr
3.2
b) 32 mm
70
Mtr
Supplying and fixing following way, single pole
and neutral, sheet steel, MCB distribution
board, 240 volts, on surface/ recess, complete
with tinned copper bus bar, neutral bus bar,
earth bar, din bar, interconnections, powder
painted including earthing etc. as required. (But
without MCB/RCCB/Isolator)
a)2 + 12 way Double door
2
each
5.1
Supplying and fixing 5 amps to 32 amps rating,
240/415 volts, “C” curve, miniature circuit
breaker suitable for inductive load of
following poles in the existing MCB DB
complete with connections, testing and
commissioning etc. as required.
a) Single Pole
20
Each
5.2
b) Single pole and neutral
2
Each
1.1
2
3
4
4.1
5
Amount
6
7
8
9
10
Supplying and fixing metal box of 180mm X
100mm X 60mm deep (nominal size) on surface
or in recess with suitable size of phenolic
laminated sheet cover in front including
providing and fixing 6 pin 5/6 & 15/16 amps
socket outlet and 15/16 amps piano type
switch, connection, painting etc. as required.
Supplying and fixing of weather proof
pole/Cable looping box of size 250 mm X 350
mm X 100 mm (NS) SMC box complete (Make:
Sintex) with 2 Nos Aluminium strip of size 20
mm X 5 mm of suitable length mounted on DMC
support and one no. 6 AMP 'C' Series SP MCB of
suitable for 240 Volt AC supply i/c connection,
two nos MS clamp made out of 25 X 5 mm MS
strip for mounting complete as required
Supplying ,installation ,testing & commissioning
of 1200mm Sweep AC ceiling fan BEE 5star
rating complete with all accessories Rating but
without regulator i/c wiring the down rod of
standard length (Upto 30 cm) with 1.5 sq mm
FRLS PVC insulated copper conductor cable etc
as reqd.(Make: Crompton Greaves, Model
Empower 50/Bajaj, Model: Excel/Havells
,Model:ES-50/ES-50 Premium)
Supplying,
installation,
testing
and
commissioning of 1 X 36/40 watt ECO box
luminiar and having electronic ballast of 1 X
36/40 watt FTL i/c connection with 1.5 sq mm
FRLS PVC insulated copper conductor , single
core cable and earthing etc as reqd. (Make :
Bajaj, Model No. ECO Box 36/40 watt
Electronic/Surya/HPL/Crompton Greaves)
Suplying installation, testing & commissioning
of 225mm sweep,1400RPM Fresh Air Fan
complete with all accessories i/c connection etc
as reqd. (Make: Bajaj /Crompton/Usha)
Total
20
Each
2
Each
8
Each
16
Each
2
Each
ASSISTANT ENGINEER (E) 2523
PWD EMD- M 252, (NCTD),
L.B.S. HOSPITAL, DELHI
SPECIFICATIONS AND SPECIAL CONDITION
1.
The work shall be carried out strictly in conformity with the CPWD General specification Part-I (Internal) 2005, PartII (External) 1995 for electrical works in force and the Indian Electricity Rule - 1956 as amended upto date for such
works.
2.
All the materials, whatsoever, to be supplied and provided by the contractor should be of standard and approved
quality. These should be got approved from the Engineer-in- Charge of his authorized representative before
installation. No payment will be made for any unapproved or sub standard / rejected materials used on the work.
Rejected materials should be removed from the site of work within 48 hours, failing which the same will be liable for
removal by the department at the risk and cost of the contractor without any liability.
3.
The electrical work shall be done strictly in close co-ordination with civil works where- ever these are in control of
this office. No claim for idle labour shall be entertained under this agreement.
4.
Any damage done to the building while executing the electrical work should be made good to the entire satisfaction of
the department. The chases, holes etc. cut in the walls and roofs should be filled within two days. All malba should be
removed on the same day. In case of failure to do so, it will be got done by the Engineer-in-Charge or his authorized
representative at contractor's risk and cost.
5.
All watch and ward of the materials installed at work will be the responsibility of the contractor till their handing over
to the department on completion of work. Merely recording of measurement and running payments made to
contractor will not mean handing over of installation. There will be regular hand in over / taking over of the
installation. Any missing item shall have to be made good by the contractor.
6.
Persons executing electrical work should have valid electrical license as required under I.E. Act.
7.
The earthing shall invariably be done in presence of the AE/JE in-charge of the work.
8.
All Metal Boxes and junction boxes should be cleared and cleaned properly and painted before fixing the accessories.
9.
Supply items are to be got checked from Engineer-in-charge in advance; otherwise no payment shall be released.
10. All screws/nuts bolts should be galvanized/cadmium plated only, as the case may be.
11. Contractor will have to abide by the instructions contained in CPWD Manual.
12. The wires in wiring work shall be used FR only and of the make as per enclosed list.
13. Whatever repairs work. It should be done with proper cement and sand ratio and to be maintained with existing
finish.
14. The work order should be issued on Form CPWD -11 A.
15. The work is of urgent nature and must be completed within 2 days from the date of award.
ASSISTANT ENGINEER (E) 2523
PWD EMD- M 252, (NCTD),
L.B.S. HOSPITAL, DELHI