SAFETY DATA SHEET Refresh AntiBac FOAM

Revision date: 3/16/2015
Revision: 1
Supersedes date: 4/12/2013
SAFETY DATA SHEET
Refresh AntiBac FOAM
1. Identification
Product identifier
Product name
Refresh AntiBac FOAM
Product number
ANT120TF-US, ANT1L-US, ANT1LG-US, ANT1LO-US, ANT2LT-US, ANT400ML-US,
ANT16LC-US, 27250, 59250, 59254, 59256, 53127, 53515, 57250, 57254, 57256, 53105
Internal identification
53211 / 0002
Synonyms; trade names
Deb AntiBac Foam Wash, AeroGreen Antibacterial Foam Soap
Recommended use of the chemical and restrictions on use
Application
Antibacterial hand soap
Details of the supplier of the safety data sheet
Supplier
Deb USA, Inc.
2815 Coliseum Centre Drive, Suite 600
Charlotte, North Carolina 28217 USA
800-248-7190
704-263-9601 (Fax)
Manufacturer
Deb USA, Inc.
1100 South Highway 27
Stanley, North Carolina 28164 USA
704-263-4240
704-263-4502 (Fax)
Emergency telephone number
Emergency telephone
Chemtrec 800 424 9300 (24 hour)
2. Hazard(s) identification
Classification of the substance or mixture
Physical hazards
Not Classified
Health hazards
Eye Irrit. 2B - H320
Environmental hazards
Not Classified
Label elements
Signal word
Warning
Hazard statements
H320 Causes eye irritation.
Precautionary statements
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.
3. Composition/information on ingredients
Mixtures
1/6
Revision date: 3/16/2015
Revision: 1
Supersedes date: 4/12/2013
Refresh AntiBac FOAM
Composition comments
Aqua (Water), Sodium Laureth Sulfate, Propylene Glycol, PEG-7 Glyceryl Cocoate, Glycerin,
Cocamidopropyl Betaine, Triclosan, 2-Bromo-2-nitropropane-1,3-diol, Fragrance, Citric Acid,
Methylchloroisothiazolinone, Methylisothiazolinone, Green 5 (CI 61570), Yellow 5 (CI 19140).
4. First-aid measures
Description of first aid measures
Inhalation
Not relevant. Unlikely route of exposure as the product does not contain volatile substances.
Ingestion
Rinse mouth thoroughly with water. Get medical attention if any discomfort continues.
Skin Contact
Not applicable.
Eye contact
Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the
eye lids. Get medical attention promptly if symptoms occur after washing.
Most important symptoms and effects, both acute and delayed
Inhalation
No specific symptoms known.
Ingestion
No specific symptoms known.
Skin contact
Prolonged skin contact may cause redness and irritation.
Eye contact
May cause temporary eye irritation.
Indication of immediate medical attention and special treatment needed
Notes for the doctor
No specific recommendations.
5.Fire-fighting measures
Extinguishing media
Suitable extinguishing media
The product is not flammable. Use fire-extinguishing media suitable for the surrounding fire.
Special hazards arising from the substance or mixture
Hazardous combustion products
No known hazardous decomposition products.
Advice for firefighters
Protective actions during firefighting
No specific firefighting precautions known.
6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
Personal precautions
Avoid contact with eyes.
Environmental precautions
Environmental precautions
Not considered to be a significant hazard due to the small quantities used.
Methods and material for containment and cleaning up
2/6
Revision date: 3/16/2015
Revision: 1
Supersedes date: 4/12/2013
Refresh AntiBac FOAM
Methods for cleaning up
Flush away spillage with plenty of water. Avoid runoff into storm sewers and ditches which lead to waterways.
Reference to other sections
For waste disposal, see Section 13.
7. Handling and storage
Precautions for safe handling
Usage precautions
Avoid contact with eyes.
Conditions for safe storage, including any incompatibilities
Storage precautions
Keep only in the original container.
Specific end uses(s)
Specific end use(s)
The identified uses for this product are detailed in Section 1.2.
8. Exposure Controls/personal protection
Control parameters
Occupational exposure limits
Exposure controls
Appropriate engineering controls
Not relevant.
Eye/face protection
Not required normally but wear eye protection if you are conducting an operation where there is a risk of this product getting in
the eyes.
Hand protection
Not applicable.
Respiratory protection
No specific recommendations.
9. Physical and Chemical Properties
Information on basic physical and chemical properties
Appearance
Clear liquid.
Color
Green.
Odor
Fragrant
pH
pH (concentrated solution): 5.0 - 7.0
Solubility(ies)
Soluble in water.
10. Stability and reactivity
Reactivity
There are no known reactivity hazards associated with this product.
Stability
Stable at normal ambient temperatures.
3/6
Revision date: 3/16/2015
Revision: 1
Supersedes date: 4/12/2013
Refresh AntiBac FOAM
Possibility of hazardous reactions
Not known.
Conditions to avoid
There are no known conditions that are likely to result in a hazardous situation.
Materials to avoid
No specific material or group of materials is likely to react with the product to produce a hazardous situation.
Hazardous decomposition products
Does not decompose when used and stored as recommended.
11. Toxicological information
Information on toxicological effects
Toxicological effects
All ingredients are well known and have a history of safe use in the marketplace with no reports of a significant number of
adverse reactions.
Inhalation
No specific health hazards known.
Ingestion
May cause gastrointestinal irritation or discomfort with nausea, vomiting and diarrhea if swallowed.
Skin Contact
Skin irritation should not occur when used as recommended.
Eye contact
May cause temporary eye irritation.
12. Ecological Information
Ecotoxicity
Not regarded as dangerous for the environment.
Bioaccumulative potential
No data available on bioaccumulation.
Mobility in soil
Mobility
The product is soluble in water.
Results of PBT and vPvB assessment
This product does not contain any substances classified as PBT or vPvB.
Other adverse effects
None known.
13. Disposal considerations
Waste treatment methods
General information
When handling waste, the safety precautions applying to handling of the product should be considered.
Disposal methods
Dispose in accordance with local, state and federal regulations.
14. Transport information
Road transport notes
Not classified.
4/6
Revision date: 3/16/2015
Revision: 1
Supersedes date: 4/12/2013
Refresh AntiBac FOAM
Rail transport notes
Not classified.
Sea transport notes
Not classified.
Air transport notes
Not classified.
UN Number
Not applicable.
UN proper shipping name
Not applicable.
Transport hazard class(es)
Not applicable.
Packing group
Not applicable.
Environmental hazards
Environmentally Hazardous Substance
No.
Special precautions for user
Not applicable.
Transport in bulk according to
Annex II of MARPOL 73/78
and the IBC Code
Not applicable.
15. Regulatory information
Regulatory Status
This product is manufactured and labeled in compliance with the Federal Food, Drug, and
Cosmetic Act, and is exempt from the labeling requirements of the OSHA Hazard
Communication Standard. All components of this product are either on the TSCA 8(b)
inventory or otherwise exempt from listing.
16. Other information
Revision comments
Revision of information
Revision date
3/16/2015
Revision
1
Supersedes date
4/12/2013
SDS No.
11124
Hazard statements in full
H320 Causes eye irritation.
ACA HMIS Health rating.
Slight Hazard. (1)
ACA HMIS Physical hazard
rating.
Normally stable. (0)
ACA HMIS Personal
protection rating.
N/A.
ACA HMIS Flammability
rating.
Will not burn. (0)
Notes For Risk Phrases And
Hazard Statements In Full
The full text for Risk Phrases and Hazard Statements in section 16 relates to the reference
numbers in sections 2 and 3 and not necessarily the finished product classification.
5/6
Revision date: 3/16/2015
Revision: 1
Supersedes date: 4/12/2013
Refresh AntiBac FOAM
Disclaimer
This information relates only to the specific material designated and may not be valid for such material used in combination
with any other materials or in any process. Such information is, to the best of the company's knowledge and belief, accurate
and reliable as of the date indicated. However, no warranty guarantee or representation is made to its accuracy, reliability or
completeness. It is the user's responsibility to satisfy himself as to the suitability of such information for his own particular use.
6/6