Trust NZ Designed and Manufactured IC-F ABUTTED & COVERED At 80 Lumens per watt, the E-LIGHTZ is the most efficient New Zealand designed and manufactured LED downlight available. 12W Colour 885 - 1000 Lu The Luminaire output for the E-Lightz range is between 830-1000 lumens + E-Lightz is the only LED that offers the option of an IC rated driver 2700 - 3000K ‘True to life’ colour rendering, without the colour draining seen in other LEDs. The E-LIGHTZ LED ensures that reds are red and blues are blue. It ensures a warm cosy, welcoming light 110° Beam Angle Wide beam = less lights. (1x light in a standard bedroom is sufficient) Trim Options Matt white Silver Anodised Use General As the E-LightZ is rated IP44, it can be used in any room including bathrooms and external outside covered areas ZERO clearance needed to building and low profile - can be used anywhere 80% Energy Savings 5yr Warranty on luminaire Burns bright for up to 50,000 hours Clever thermal design to allow insulation to cover LED Efficient Downlight 12W | 1000 lumen Dimmable driver included 300mA Version 260mA Version Colour temp 2700K 2700K Class IC-F Downlight IC-F Downlight Dimming Yes Yes Dimensions 130mm x 40mm 130mm x 40mm Min hole depth 37mm 37mm Driver (included) SL300D SL260D Driver covered NO LED power 10.5W 9.2W Luminaire power 12.9W 11.3W Efficacy 76 L/W PF 0.9 0.9 CRI 82 82 3000K NO INSULATION SAFE Insulation safely wraps over E-LIGHTZ - tested and approved YES 80 L/W Insulation 3000K YES NO HEAT LOSS Stops chimney effect heat loss from room 78 L/W SCB & HCB = 0 82 L/W Can be used in any room in any position DIMMABLE DRIVER Standard dimming Luminaire output 980 Lumen IP rating IP44 IP44 Beam angle 110 Deg 110 Deg 1030 Lumen 885 Lumen 930 Lumen • This product can be used to replace any traditional downlight up to 100W. 130 130 Trim colours Matt White / Silver / Natural Anodised Matt White / Silver / Natural Anodised Cutout 100mm - 120mm 100mm - 120mm Classification IC-F IC-F Dimensions 110 = 110° 27 = 2700K W = White 30 = 3000K S = Silver A = Anodised* B = Black Input 1= downlight A = 300mA B = 260mA 100 100 100 35 SL40 Type 35 Colour Temp K 39 Beam 39 Trim Finish Colour 35 eg. code = SL40W-110-27-1-A Product 130 39 how to Specify • Dimming driver is compatible with most universal and trailing edge dimmers refer to installation sheet. * currently not available Light Levels 100 130 100 130 130 260mA 100 300mA 110° 110° 2700K 356 lux 3000K 370 lux 1m 2m 89 lux 93 lux 2m 3m 45 lux 46 lux 3m 5m head office 53C Bolt Road, Nelson 7011, New zealand 2700K 400 lux 3000K 420 lux 1m 2m 100 lux 105 lux 2m 3m 50 lux 53 lux 3m 5m post PO Box 1949, Nelson 7040, New zealand p +64 (3) 970 0755 e [email protected] www.switch-lighting.co.nz
© Copyright 2024