1. No category

TREND MICRO
TM
Deep Discovery Email Inspector 7100 V1
Deep Discovery Email Inspector stops sophisticated targeted attacks and cyber threats
by scanning, simulating, and analyzing suspicious links and attachments in email
messages before they can threaten your network. Designed to integrate into your
existing anti-spam/antivirus network topology, Deep Discovery Email Inspector can act
as a Mail Transfer Agent in the mail traffic flow or as an out-of-band appliance silently
monitoring your network for cyber threats.
1
3
2. Connect the appliance to a power source.
3. Connect the monitor to the VGA port at the front of the appliance.
4. Connect the keyboard and mouse to the USB ports at the front of the appliance.
5. Power on the appliance.
Recommended Network Environment
Mail
Network
6
Management
Metwork
Performing the Initial Configuration
Configure network settings in the Command Line Interface to gain access to the
management console.
Opening and Inspecting the Carton
Note: For information about connecting through SSH, see the Administrator’s Guide.
Verify that the Deep Discovery Email Inspector carton contains the following items:
Custom
Network
Power cords
Rack rails
Custom
Network
Quick Start Card
Management
Network
Mail
Network
Appliance and bezel
2
Installation DVD
4
Front Panel
VGA
LCD panel
port
LCD menu
USB 2.0
NMI
button
ports
button
Power 2.5-inch
button hard drive
2.5-inch
hard drive
Device ID
panel
The custom network handles sandbox analysis. The custom network should be an isolated
network without a proxy or connection restrictions so that malicious samples do not affect other
networks. Use any available data port (eth1, eth2, or eth3) that is not configured for the mail network.
The management network handles the management console, SSH connections, and Trend
Micro updates. Mail traffic can also pass through the management network. Use only the
management port (eth0).
(Optional) The mail network handles mail routing and monitoring. Use the following data
ports according to your deployment:
l For BCC or MTA mode, use any available data port (eth1, eth2, or eth3)
l For SPAN/TAP mode, use only the available eth2 or eth3 data port
To plan your network deployment environment and learn more about BCC, MTA and
SPAN/TAP operation modes, see the Deployment chapter in the Administrator's Guide.
Examining the Deep Discovery Email Inspector Appliance
The power button is behind the bezel. Remove the bezel for the initial configuration
and then re-attach it when finished.
DVD drive
Deployment Checklist
Requirement
Details
Activation Code
Obtain from Trend Micro
Monitor and VGA cable
Connects to the VGA port of the appliance
USB keyboard
Connects to the USB port of the appliance
USB mouse
Connects to the USB port of the appliance
Ethernet cables
Connect to the management and data ports.
Required: Management port (eth0) connects to the management network.
Recommended: Data port (eth1, eth2, or eth3) connects to the custom network.
Optional: Unused data ports connect to the mail network for mail routing and
monitoring.
IP addresses
Required: One IPv4 address for the management network.
Recommended: One IPv4 addresses for the custom network.
Optional: Two IPv4 addresses for the mail network and one IPv6 address for the
management network.
Internet-enabled
computer
Access the management console from a computer that has the following software installed:
l A supported web browser:
l Microsoft™ Internet Explorer™ 9, 10, 11
l Mozilla™ Firefox™ 24 or later
l Google™ Chrome™ 32 or later
l Adobe™ Flash™ 10 or later
Back Panel
Data port
(eth2)
Data port
(eth3)
Fiber NIC
slot
VGA
Data port
port
(eth1)
Serial
Management
USB 2.0
port
port (eth0)
ports
AC power slots
Note: Your device comes with the Copper Ethernet NIC. If your purchase includes the
optional Fiber Ethernet NIC, plug it to the appliance through the Fiber NIC slot.
Deep Discovery
Email Inspector
5
Setting Up the Hardware
1. Mount the Deep Discovery Email Inspector appliance in a standard 19-inch 4-post
rack, or on a free-standing object, such as a sturdy desktop.
Note: When mounting the appliance, leave at least two inches of clearance on all sides for
proper ventilation and cooling.
1. Log on to the Command Line Interface with the default credentials.
l User name: admin
l Password: ddei
2. Type "enable" (no quotes) and then press Enter.
3. Type the default password, "trend#1" (no quotes), and then press Enter. The
prompt changes from > to #.
4. Configure network settings with the following command:
configure network basic
5. Specify the network settings for the management network and press Enter after
typing each setting. IPv6 settings are optional.
l Host name
l IPv6 address
l IPv4 address
l Prefix length
l Subnet mask
l IPv6 gateway
l IPv4 gateway
l Preferred IPv6 DNS
l Preferred IPv4 DNS
l Alternate IPv6 DNS
l Alternate IPv4 DNS
6. Type Y to confirm settings and restart.
Deep Discovery Email Inspector implements specified network settings and restarts all
services. The initial configuration is complete and the management console is accessible.
7
8
Accessing the Management Console
1. From a supported web browser, open the management console at:
https://{appliance_IP_address}
Note: Use the IPv4 address configured in the initial configuration (Step 5).
The default IPv4 address is 192.168.252.1.
2. If an error appears indicating that the certificate was issued from a different
web address, click Continue to proceed.
3. Specify the default credentials.
a) User name: admin
b) Password: ddei
4. Click Log On.
The management console dashboard appears. For additional configuration procedures,
see the Getting Started chapter in the Administrator’s Guide.
Download the document at:
http://docs.trendmicro.com/en-us/enterprise/deep-discovery-email-inspector.aspx
Contact Information
Website:
http://www.trendmicro.com
List of worldwide offices and phone numbers:
http://www.trendmicro.com/us/about-us/contact/index.html
© 2015 Trend Micro Incorporated All rights reserved. Trend Micro, the t-ball logo are trademarks or
registered trademarks of Trend Micro Incorporated. All other company and/or product names may be
trademarks or registered trademarks of their owners. Information contained in this document is
subject to change without notice.
Item Code: APEQ26919/150421