EAZ LIFT WEIGHT DISTRIBUTION HITCHES EAZ LIFT WEIGHT DISTRIBUTION HITCHES

EAZ LIFT WEIGHT DISTRIBUTION HITCHES
EAZ LIFT WEIGHT
DISTRIBUTION HITCHES
Adjustable tow ball mount
height positions
Easy tow ball mount angle adjustments
Easy assembly and installation
Tested in Australia and compliant
with Australian Standards (ADR62/01)
Manufactured from high grade
materials
Designed with ease of operation in mind, the Eaz Lift
Weight Distribution Hitch has high grade machine
tapered round spring steel bars and is available in
a 600 or 800 Series with various shanks sold separately.
The Eaz Lift range of weight distribution hitches include
bolt together tow ball mounts that are completely
adjustable for changing tow ball heights and angles to
suit different applications. The left and right sway
control mounting facility is already provided for, should
you later require a sway control kit for additional towing
comfort and safety. All necessary parts come with each
hitch including hook-up brackets, spring bars, chains,
tow ball mount, hitch pin, clip and bolt package for
adjusting your hitch.
• Please note shanks are sold separately
TIP - Do not overload any part of your towing system.
Consult the vehicle manual for towing recommendations
and limitations.
WEIGHT DISTRIBUTION HITCHES
EAZ LIFT 600 SERIES (272KG)
WEIGHT DISTRIBUTION HITCH
EAZ LIFT 600 SERIES (272KG)
WEIGHT DISTRIBUTION HITCH
EAZ LIFT 800 SERIES (363KG)
WEIGHT DISTRIBUTION HITCH
EAZ LIFT 800 SERIES (363KG)
WEIGHT DISTRIBUTION HITCH
No Shank
350-05600
With 1 ¼” Ball Hole, No Shank
350-05620
No Shank
350-05610
With 1 ¼” Ball Hole, No Shank
350-05630
WEIGHT DISTRIBUTION HITCH AVAILABLE SHANKS
EXTRA HI-LOW SHANK
Used in either the high or low position to match the tow ball
mount to any coupler height. Long hi-low shanks provide
the extra length sometimes needed to obtain clearance
from bumper interference.
Fits 2” x 2” receiver
Part number shank size length
350-05704
2” x 2”
10”
350-05706
2” x 2”
8”
HI-LOW SHANK
Fits 2” x 2” receiver
EXTRA LOW SHANKS
Part number shank size length
350-05700
2” x 2”
10”***
350-05702
2” x 2”
8”
Part number shank size length
350-05708
2” x 2”
10”
Tow ball mount and shank to be used in low position only
115mm
350-05700
EXTRA HI-LOW SHANK
80mm
75mm
80mm
350-05702
CAN BE USED IN HIGH OR LOW POSITION
115mm 80mm
350-05704
EXTRA LOW SHANKS
8”
10”
8”
75mm 80mm
350-05706
CAN BE USED IN HIGH OR LOW POSITION
10”
80mm
10”
65mm
***BEST-SELLER HI-LOW SHANK
350-05708
TO BE USED IN LOW POSITION ONLY
SWAY CONTROL BAR AND LUBRICANT
The Eaz Lift screw on sway controls minimize the sway
caused from passing trucks and sudden gusts of wind. Its
double friction disc brake principle enables it to constantly
reduce the sway and hence improves vehicle handling.
Note: Vehicles over 24’ may require two sway controls.
350-05800 EAZ LIFT SCREW-ON SWAY CONTROL DRIVERS SIDE/RIGHT HAND MOUNTED
350-05810 EAZ LIFT SCREW-ON SWAY CONTROL PASSENGER SIDE/LEFT HAND MOUNTED
A non-toxic lubricant which helps to reduce friction and
corrosion. It is recommended that you apply this lubricant
to your Eaz Lift WDH daily while it is being used.
350-05500
CAMCO EAZ-LIFT TRAILER
HITCH LUBRICANT
PROUDLY DISTRIBUTED IN AUSTRALIA AND NEW ZEALAND BY
DEALER / SUPPLIER
AUSTRALIA: www.coastrv.com.au NEW ZEALAND: www.coastrv.co.nz
Email: NSW: [email protected]
QLD: [email protected] VIC: [email protected]
WA: [email protected] NZ: [email protected]
TECHNICAL: [email protected]