DONIFLON
900E
Composition
Colour
2020
2030
Expanded PTFE.
PTFE resin filled with hollow PTFE resin filled with silica.
micro-glass beads.
PTFE resin filled with
barium sulphate.
White
Blue
Fawn
White
Suitable for concentrated
acids, alkalis, solvents, fuels
and steam. Not suitable for
molten alkali metals and
fluorine compounds. Very
low gas permeability.
Suitable for solvents, fuels,
refrigerants and steam.
Not suitable for molten
alkali metals and fluorine
compounds. Low gas
permeability.
Food and beverage industry,
pharmaceutical industry,
chemical industry, pulp and
paper industry.
On request.
Food industry,
pharmaceutical industry,
chemical industry, pulp and
paper industry.
On request.
2.1
7
45
14
3.0
6
40
10
It is suitable for nearly
all media and for many
applications including
pressure sensitive
connections like porcelain,
plastic, glass lined piping.
Properties
2010
Food and beverage industry,
industry,
Appropriate industries pharmaceutical
chemical industry, pulp and
paper industry.
Approvals
On request.
TECHNICAL DATA Typical values for a thickess of 2 mm
DIN 28090-2
g/cm3
Density
ASTM F36J
%
Compressibility
ASTM F36J
%
Recovery
ASTM F152
MPa
Tensile strength
DIN 52913
Stress resistance
16 h, 30 MPa, 150 °C
MPa
DIN 3535-6 mg/(s.m)
Specific leak rate
pH range
Operating conditions
Suitable for pressure sensitive
flanges such as glass lined,
ceramic flanges, glass
reinforced plastic flanges
and uneven or distorted
flanges. Chemically suitable
for almost all chemicals
with the exception of molten
alkali metals and fluorine
compounds.
Food and beverage industry,
pharmaceutical industry,
chemical industry, pulp and
paper industry.
On request.
0.9
55
12
32
1.5
35
40
14
16
0.002
0-14
14
0.002
0-14
DONIFLEX
Composition
Colour
13
0.002
0-14
13
0.002
0-14
Properties
Appropriate industries
Black
Black
Suitable for a wide range of
applications especially for
higher operating pressures
such as in gas supply,
compressors,
pumps and valves.
Properties
industry, food
Appropriate industries Chemical
industry, OEM industry.
BAM (Oxygen), DIN-DVGW
DIN 3535-6, DVGW KTW,
DVGW VP 401
Approvals
An excellent media
resistance and the safety
aspect, even in applications
with cycling loads makes this
material superior.
Chemical industry,
petrochemicals, OEM
industry.
Chemical industry,
petrochemicals, power
plants.
BAM (Oxygen),
DIN-DVGW DIN 3535-6,
DVGW KTW, DVGW VP 401
BAM (Oxygen), DIN-DVGW
DIN 3535-6, DVGW KTW,
DVGW VP 401, API 607,
Germanischer Lloyd
Oil and gas industry,
chemical industry,
petrochemicals, power
plants, pulp and paper
industry, shipbuilding, heat
exchangers.
On request
On request
1.7
15
20
Recovery
ASTM F36J
%
17
32
45
30
Tensile strength
ASTM F152
MPa
4.5
9
8
15
Stress resistance
DIN 52913
MPa
40
45
42
40
35
40
38
35
0.5
0.3
0.1
0.1
Specific leak rate
MPa
DIN 3535-6 mg/(s.m)
Thickness increase
ASTM F146
Oil IRM 903, 5 h, 150 °C
%
3
5
5
8
ASTM Fuel B, 5 h, 23 °C
%
2
5
5
8
Oil IRM 903, 5 h, 150 °C
%
30
20
15
18
ASTM Fuel B, 5 h, 23 °C
%
25
17
15
18
At room temperature: εKSW
%
26
/
6
/
At elevated temperature: εWSW/200 °C
%
5
/
6
/
Weight increase
DIN 28090-2
Percentage creep relaxation
DIN 28090-2
At room temperature: εKRW
%
3.0
/
4.0
/
At elevated temperature: εWRW/200 °C
%
0.5
/
0.5
/
Change in thickness at 20 °C, 50 MPa
%
33
18
15
18
Change in thickness at 300 °C, 50 MPa
%
8
10
7
8
Change in thickness at 400 °C, 50 MPa
%
/
/
/
/
Creep deformation
MICALIT
F
DIN 28090-2
g/cm3
1.0
1.3
1.5
1.4
Compressibility
ASTM F36A
%
45
42
35
35
Recovery
ASTM F36A
%
13
15
17
20
Composition
Stress resistance
DIN 52913
MPa
mg/(s.m)
49
49
49
49
Colour
DIN 3535-6
0.05
0.05
0.05
0.05
Leachable chloride content
FSA NMG 202
ppm
20
20
20
20
Leachable fluoride content
FSA NMG 203
ppm
20
20
20
20
Ash content of graphite
DIN 51903
%
<1
<1
<1
<1
Compression modulus
DIN 28090-2
Properties
Appropriate industries
At room temperature: εKSW
%
41
38
34
32
At elevated temperature: εWSW/300˚C
%
0.9
1.2
1.2
2.5
Percentage creep relaxation
Pipeline systems, gas supply,
chemical industry, machine
building, power plants, valves.
20
Density
Specific leak rate
General purpose usage,
chemical industry, heating
systems.
On request.
TECHNICAL DATA Typical values for a thickness of 1.5 mm
16 h, 50 MPa, 300 °C
Pipeline systems,
chemical industry,
shipbuilding, machine
building, power plants,
valves, compressors.
35
Compression modulus
Suitable to be used in the
chemical and petrochemical
industries, at high surface
loads or high operating
pressures.
Power plants, heating
systems, chemical
industry, OEM industry.
%
16 h, 50 MPa, 300 °C
Black
The expanded metal
reinforcement permits the
optimization of surface pressure
distribution on the assembled
gaskets. The gasket material
also exhibits high sealing
performance against gases at
elevated temperatures.
ASTM F36J
16 h, 50 MPa, 175 °C
Suitable for almost all
chemicals, in the food
industry and in contact with
drinking water. Applicable
in all industries, especially
for valves, pumps and load
sensitive equipment.
Gasket material with
excellent resistance to
hot water, steam and
oils.
Compressed gasket material
with high temperature
resistance, good adaptability
and excellent long-term
stability.
Compressibility
260/500
80/1160
Black
Due to outstanding
chemical and thermal
resistance it’s a good
choice for applications in
flanges, valves, pumps
and heat exchangers.
2 mm
-200/-328
Colour
Grey
1.5
260/500
80/1160
Flexible graphite sheet
laminated to expanded
metal insertion
(AISI 316L, 0.35 mm).
Grey
1.5 mm
-200/-328
Flexible graphite sheets
mechanically bonded to
a tanged stainless steel
insertion (AISI 316; 0.1 mm).
Grey
1.4
260/500
60/870
Flexible graphite sheets
laminated with flat stainless
steel insertion (AISI 316;
0.05 mm).
Grey
1 mm
-200/-328
Flexible graphite sheets
without insert.
Graphite, aramid fibers, NBR.
Reinforced by expanded steel.
1.2
260/500
100/1450
Composition
Graphite, aramid fibers,
NBR.
2 mm
-200/-328
EM
Graphite, aramid fibers,
NBR.
DIN 28090-2 g/cm3
°C/°F
bar/psi
SP
G-EM
Graphite, aramid fibers,
NBR.
TECHNICAL DATA Typical values for a thickness of:
°C/°F
SL
G-HD
Density
Maximum temperature
Pressure
SF
G-MD
WRAS, TA-Luft (VDI 2440),
On request
DVGW W270
Approvals
Minimum temperature
GRAFILIT
G-LD
P
Aluminosilicate (phlogopite) impregnated with
silicon. Available as pure mica.
Aluminosilicate (phlogopite) impregnated with
silicon. Available with stainless steel insertion
AISI 316 0.1 mm.
Golden
Golden
Very high resistance to temperature (up to
950 °C in oxidizing atmosphere). Good chemical
resistance. Good electrical insulation and low
thermal conductivity properties.
Very high resistance to temperature (up to 950 °C
in oxidizing atmosphere). Good chemical resistance.
Good electrical insulation and low thermal conductivity
properties.
Automotive industry, petrochemicals, power
plants, steel industry, heat exchangers, oven
and furnace construction.
Automotive industry, petrochemicals, power plants, steel
industry, heat exchangers, oven and furnace construction.
TECHNICAL DATA Typical values for a thickness of 1.5 mm
DIN 28090-2
%
5.0
4.3
4.2
4.5
Density
DIN 28090-2
g/cm3
1.9
2.0
At elevated temperature: εWSW/300˚C
%
4.0
3.6
3.3
3.5
Compressibility
ASTM F36J
%
20
20
Recovery
ASTM F36J
%
35
35
˚C/˚F
-200/-328
-200/-328
-200/-328
-200/-328
Loss on ignition
DIN 52811
%
<8
<5
- oxidizing atmosphere
˚C/˚F
550/1022
550/1022
550/1022
550/1022
Stress resistance
DIN 52913
- reducing or inert atmosphere
˚C/˚F
1000/1832
700/1292
700/1292
700/1292
16 h, 50 MPa, 300 °C
MPa
38
42
Pressure
bar/psi
80/1160
100/1450
200/1450
200/1450
Maximum temperature
˚C/˚F
950/1742
950/1742
Minimum temperature
Continuous temperature
DONIT Tesnit®, d.o.o.
Cesta komandanta Staneta 38
1215 Medvode
Slovenia
Paradiæ 4
8210 Trebnje
Slovenia
Phone:
+386 (0)1 582 33 00
Phone:
+386 (0)7 304 49 20
Fax:
+386 (0)1 582 32 06
+386 (0)1 582 32 08
E-mail:
[email protected]
E-mail:
[email protected]
Quality and
experience you
can rely on.
Suzhou Donit Sealing Materials
Import and Export Co., Ltd.
DISS-EUROPE BVBA
No. 8 Suzhou Avenue West,
Bank of Chine Building, Room
1904, SIP, 215021, P.R. China
Toekomstlaan 34
BE-2200 Herentals
Belgium
Phone:
+86 (0)512 659 535 29
Phone:
+32 (0)1 430 21 00
E-mail:
[email protected]
E-mail:
[email protected]
Web:
www.donit.eu
E-mail:
[email protected]
Disclaimer
At room temperature: εKSW
Max. operating conditions
Contact information
DONIT Tesnit®, d.o.o.
All information and data quoted are based upon years of
experience in the production and operation of sealing elements.
This data may not be used to support any warranty claims. With
its publication this latest edition supersedes all previous issues
and is subject to change without further notice.
Date of issue: 20. 1. 2015
500 x 1400 | 1000 x 1400 (BA-R300)
Thickness
Composition
Colour
1.0 | 1.5 | 2.0 | 3.0 (BA-R, BA-REM)
Organic fibers bonded with NBR.
Available with wire reinforcement
on request.
Aramid fibers bonded with NBR.
Available with wire reinforcement
on request.
Aramid fibers bonded with
NBR. Available with wire
reinforcement on request.
Special synthetic fibers
bonded with NBR. Available
with wire reinforcement on
request.
Aramid fibers bonded with
NBR. Available with wire or
expanded steel reinforcement
on request.
Carbon fibers bonded with
NBR. Available with wire or
expanded steel reinforcement
on request.
Aramid and engineered mineral
fibers bonded with NBR.
Available with wire or expanded
steel reinforcement on request.
Glass fibers bonded with
NBR. Available with wire or
expanded steel reinforcement
on request.
Pink / Red
Yellow
Light green
Dark green
Blue
Black
Grey / Green
Green
0.7 | 1.0 | 1.2 | 1.4 | 2.0 | 2.5 | 3.0 (BA-R300)
1.4 | 1.6 (BA-R302)
Properties
Surface treatment is 2AS.
(BA-202, BA-203)
Surface treatment is 4AS.
(BA-50, BA-55, BA-U, BA-CF, BA-M,
Surface treatment BA-GL, BA-REM)
Surface treatment is 2G.
(BA-R, BA-R300, BA-R302)
Appropriate
industries
Very good chemical resistance
against gases, oils and fuels.
Also highly water resistant.
Excellent chemical resistance
and good dynamic resistance.
Good resistance to water,
gases, fuels and oils.
Good resistance to water, gases,
oils and fuels.
Pipeline systems, water supply
industry, machine building.
Approvals
+/- 5 % on length and width
On thickness up to 1.0 mm +/- 0.1 mm
On thickness above 1.0 mm +/- 10 %
Superior torque retention
and good steam resistance.
Excellent thermal resistance
in combination with low gas
permeability.
Heat exchangers, boilers,
radiators, steam supply,
power plants.
Chemical industry,
petrochemicals, steam supply.
BAM (Oxygen), DIN-DVGW DIN
3535-6, SVGW DIN 3535-6,
DVGW VP 401, DVGW KTW,
DVGW W270, TA-Luft (VDI
2440), WRAS, Germanischer
Lloyd, ABS, EC 1935/2004,
AGA 8140 G (Class III)
BAM (Oxygen), DIN-DVGW DIN
3535-6, DVGW KTW,
DVGW W270, DVGW VP 401,
DVGW VP 401 (5 bar),
EC 1935/2004
Excellent resistance to steam,
oils, fuels, gases, freons,
solvents, non-aggressive
chemicals, hot water and
other substances.
Excellent resistance to steam
and strong alkaline media.
Food industry, gas supply,
potable water supply,
compressors, pumps, general
purpose usage.
Potable water supply, gas
supply, pumps, radiators,
steam supply.
DIN-DVGW DIN 3535-6, DVGW
KTW, Germanischer Lloyd,
TA-Luft (VDI 2440), WRAS,
EC 1935/2004, DVGW W270
Germanischer Lloyd
Good chemical resistance,
good mechanical and thermal
properties and low gas
permeability.
Excellent thermal properties
and very good steam
resistance.
Gas supply, food industry,
chemical industry, potable
water supply, shipbuilding.
Shipbuilding, water supply
industry.
Other surface treatments including graphite
and PTFE are available on request.
Tolerances for
BA materials
Inorganic fibers, NBR bonded
with a strong wire mesh
reinforcement.
Inorganic fibers, NBR bonded
with a strong wire mesh
reinforcement.
Black
Green
Black
Black
This material combines a high
blow-out resistance with very
high pressure, temperature and
surface stress resistance. Whilst
at the same time maintaining a
high torque retention with good
chemical resistance.
Excellent mechanical,
dynamic and thermal
resistance and blow-out
safety.
Steam supply, potable
water supply, gas supply,
shipbuilding, power plants.
Automotive industry,
petrochemicals, shipbuilding.
DIN-DVGW DIN 3535-6,
DVGW VP 401, DVGW KTW,
BAM (Oxygen), WRAS,
TA-Luft (VDI 2440), API 607,
Germanischer Lloyd,
EC 1935/2004
BAM (Oxygen),
DIN-DVGW DIN 3535-6,
DVGW VP 401, DVGW KTW,
TA-Luft (VDI 2440), WRAS,
EC 1935/2004
BAM (Oxygen),
DIN-DVGW DIN 3535-6,
DVGW VP 401, DVGW KTW,
Germanischer Lloyd
Aramid fibers bonded with
NBR, wire reinforcement.
A balanced mixture of
fibers. Available with wire or
expanded steel reinforcement
on request.
Gas supply, steam supply,
power plants.
Germanischer Lloyd,
BAM (Oxygen)
Extreme dynamic and thermal
resistance.
Superior dynamic and
thermal resistance. Excellent
blow-out safety.
DIN 28090-2
g/cm3
1.8
1.8
1.8
1.8
1.7
1.7
1.8
1.7
Germanischer Lloyd
2.0
2.2
Germanischer Lloyd
3.2
3.7
Compressibility
ASTM F36J
%
9
10
8
7
11
9
10
7
8
7
10
8
Recovery
ASTM F36J
%
60
60
55
55
60
60
60
55
55
50
40
45
Tensile strength
ASTM F152
MPa
8
8
11
7
10
12
13
11
17
35
/
/
Stress resistance
DIN 52913
16 h, 50 MPa, 175 °C
MPa
20
25
25
35
27
35
35
38
30
43
46
48
16 h, 50 MPa, 300 °C
MPa
/
/
/
30
23
30
27
33
25
38
40
45
mg/(s.m)
0.06
0.08
0.08
0.08
0.05
0.1
0.05
0.03
/
0.05
/
/
Specific leak rate
DIN 3535-6
Thickness increase
ASTM F146
Oil IRM 903, 5 h, 150 °C
%
10
8
8
8
2
5
5
3
ASTM Fuel B, 5 h, 23 °C
%
10
10
10
10
5
5
6
5
Compression modulus
8
5
/
8
5
/
5
/
DIN 28090-2
At room temperature: εKSW
%
/
/
/
7.6
9.5
7.3
10.8
6.9
/
6.5
/
/
At elevated temperature: εWSW/200 °C
%
/
/
/
11.4
16.1
8.3
11.0
7.9
/
5.8
/
/
Percentage creep relaxation
DIN 28090-2
At room temperature: εKRW
%
At elevated temperature: εWRW/200 °C
/
%
/
/
/
/
3.2
/
4.7
0.8
3.6
0.8
3.3
4.1
1.0
/
1.2
0.8
3.2
/
0.5
/
Acetic ester
Acetic ester
Kerosene
Kerosene
Acetone
Acetone
Lead acetate
Lead acetate
Acetylene
Acetylene
Lead arsenate
Lead arsenate
Adipic acid
Adipic acid
Magnesium
Magnesium
sulphate
sulphate
Air
/
Methane
Methane
Aluminium
Aluminium
acetateacetate
Methanol
Methanol
Aluminium
Aluminium
chlorate
chlorate
Methyl Methyl
chloride
chloride
Aluminium
Aluminium
chloride
chloride
Methylene
Methylene
dichloride
dichloride
Ammonia
Ammonia
Methyl Methyl
ethyl ketone
ethyl ketone
Ammonium
Ammonium
hydroxide
hydroxide
Naphtha
Naphtha
Amyl acetate
Amyl acetate
Nitric acid
Nitric
20%
acid 20%
AnilineAniline
Nitric acid
Nitric
40%
acid 40%
AsphaltAsphalt
Nitric acid
Nitric
96%
acid 96%
BariumBarium
chloride
chloride
Nitrobenzene
Nitrobenzene
Benzene
Benzene
Nitrogen
Nitrogen
BenzoicBenzoic
acid acid
OctaneOctane
Boric acid
Boric acid
Oleic acid
Oleic acid
Borax Borax
Oleum Oleum
ButaneButane
Oxalic acid
Oxalic acid
Butyl alcohol
Butyl alcohol
OxygenOxygen
ButyricButyric
acid acid
Palmitic
Palmitic
acid acid
Calcium
Calcium
chloride
chloride
Pentane
Pentane
Calcium
Calcium
hydroxide
hydroxide
Perchloroethylene
Perchloroethylene
CarbonCarbon
dioxidedioxide
PhenolPhenol
CarbonCarbon
disulphide
disulphide
Phosphoric
Phosphoric
acid acid
Chloroform
Chloroform
Potassium
Potassium
acetateacetate
Chlorine,
Chlorine,
dry
dry
Potassium
Potassium
bicarbonate
bicarbonate
Chlorine,
Chlorine,
wet wet
Potassium
Potassium
carbonate
carbonate
Chromic
Chromic
acid acid
Potassium
Potassium
chloride
chloride
Citric acid
Citric acid
Potassium
Potassium
dichromate
dichromate
CopperCopper
acetateacetate
Potassium
Potassium
hydroxide
hydroxide
Creosote
Creosote
Potassium
Potassium
iodide iodide
Cresol Cresol
Potassium
Potassium
nitrate nitrate
Cyclohexanol
Cyclohexanol
Potassium
Potassium
permanganate
permanganate
Cyclohexanone
Cyclohexanone
Propane
Propane
DecalinDecalin
Pyridine
Pyridine
Dibenzyl
Dibenzyl
ether ether
R 134a R 134a
Dimethyl
Dimethyl
formamide
formamide
Salicylic
Salicylic
acid acid
Dowtherm
Dowtherm
SiliconeSilicone
acid acid
EthaneEthane
Soap Soap
Ethyl acetate
Ethyl acetate
SodiumSodium
aluminate
aluminate
Ethyl alcohol
Ethyl alcohol
SodiumSodium
bicarbonate
bicarbonate
Ethyl chloride
Ethyl chloride
SodiumSodium
bisulphite
bisulphite
Ethylene
Ethylene
SodiumSodium
carbonate
carbonate
Ethylene
Ethylene
glycol glycol
SodiumSodium
chloride
chloride
SodiumSodium
cyanidecyanide
/
SodiumSodium
hydroxide
hydroxide
Formaldehyde
Formaldehyde
SodiumSodium
sulphate
sulphate
Freon 12
Freon 12
SodiumSodium
sulphide
sulphide
Freon 22
Freon 22
Starch Starch
180/356
250/482
280/536
350/662
350/662
400/752
440/824
440/824
400/752
460/860
550/1022
650/1202
Continuous temperature
°C/°F
140/284
200/392
220/428
270/518
250/482
300/572
350/662
350/662
350/662
370/698
450/842
600/1112
- with steam
°C/°F
120/248
160/320
180/356
230/446
200/392
280/536
300/572
250/482
140/2030
250/482
bar/psi
40/580
50/725
80/1160
100/1450
100/1450
100/1450
120/1740
120/1740
150/2175
Fuel oilFuel oil
Steam Steam
Gasoline
Gasoline
StearicStearic
acid acid
Glycerine
Glycerine
Sugar Sugar
Heptane
Heptane
Sulphuric
Sulphuric
acid 20%
acid 20%
Hydraulic
Hydraulic
oil (Mineral)
oil (Mineral)
Sulphuric
Sulphuric
acid 96%
acid 96%
Hydraulic
Hydraulic
oil (Phosphate
oil (Phosphate
ester type)
ester type)
80
80
80
0
-50
0
50
100
150
200
TEMPERATURE [˚C]
250
300
0
-50
0
50
100
150
200
TEMPERATURE [˚C]
250
300
0
-50
0
50
100
150
200
TEMPERATURE [˚C]
250
300
100
100
100
100
140
120
60
40
20
0
150
-50
0
50
100
150
200
TEMPERATURE [˚C]
250
300
50
0
-50
0
50
100
150
200
TEMPERATURE [˚C]
250
300
350
50
0
-50
0
50
100
150
200
TEMPERATURE [˚C]
250
300
350
50
0
-50
0
50
100
150
200
TEMPERATURE [˚C]
250
300
350
PRESSURE [bar]
20
150
PRESSURE [bar]
20
40
150
PRESSURE [bar]
20
40
60
150
PRESSURE [bar]
40
60
PRESSURE [bar]
60
PRESSURE [bar]
80
PRESSURE [bar]
100
PRESSURE [bar]
General suitability using common installation practices under the condition
of chemical compatibility.
Maximum performance is ensured through appropriate measures for joint
design and gasket installation. Consultation is recommended.
Limited application area. Technical consultation is mandatory.
PRESSURE [bar]
P-T DIAGRAM EN 1514-1, Type IBC, PN 40, DIN 28091-2 / 3.8, 2.0 mm
100
50
0
-50
0
50
100
150
200
TEMPERATURE [˚C]
250
300
350
100
80
60
40
20
0
-50
0
50
100
150
TEMPERATURE [˚C]
200
250
Milk
Formic Formic
acid 85%
acid 85%
°C/°F
100
Milk
MineralMineral
oil typeoil
ASTM
typeno.1
ASTM no.1
FormicFormic
acid 10%
acid 10%
Peak temperature
100
Malic acid
Malic acid
Alum Alum
/
Max. operating conditions
Pressure
Isooctane
Isooctane
Isopropyl
Isopropyl
alcoholalcohol
Ammonium
Ammonium
chloride
chloride
Automotive industry,
petrochemicals, shipbuilding.
Isobutane
Isobutane
Acetic acid
Acetic
100%
acid 100%
Ammonium
Ammonium
bicarbonate
bicarbonate
Automotive industry,
petrochemicals, shipbuilding.
Pressure - Temperature diagrams are the most current method for determining the suitability
of a gasket material in a known application. Maximum figures for temperature and pressure
can be misleading. Max. temperature and max. pressure represent maximum values and
should not be used simultaneously. They are given only for guidance, since these max. values
depend not only on the type of gasket material used but also on the assembly conditions.
Please use the Pressure - Temperature diagrams to check the suitability of the chosen gasket
material for your application (combination of pressure and temperature).
Hydraulic
Hydraulic
oil (Glycol
oil (Glycol
based) based)
Tar
Tar
TartaricTartaric
acid acid
Hydrazine
Hydrazine
TolueneToluene
Hydrochloric
Hydrochloric
acid 20%
acid 20%
Transformer
Transformer
oil
oil
Hydrochloric
Hydrochloric
acid 36%
acid 36%
Trichlorethylene
Trichlorethylene
Hydrofluoric
Hydrofluoric
acid 10%
acid 10%
Water Water
Hydrofluoric
Hydrofluoric
acid 40%
acid 40%
White spirit
White spirit
Hydrogen
Hydrogen
Xylene Xylene
All information,
All information,
and data
and
quoted
data are
quoted
based
areon
based
yearsonofyears
experience
of experience
in production
in production
and operation
and operation
of sealing
of sealing
elements.
elements.
The data
The
may
data
not,may
be used
not, be
to used
support
to support
any warranty
any warranty
claims.This
claims.This
edition cancels
edition cancels
all previous
all previous
issues, issues,
and is aand
subject
is a subject
to change
to change
withoutwithout
further further
notice. notice.
BA-REM
BA-REM
BA-R
BA-GL
BA-R
BA-GL
BA-M
BA-M
BA-CF
BA-CF
BA-U
BA-U
BA-55
BA-55
BA-50
BA-50
BA-203
BA-203
BA-202
Recommended
Recommended
Recommendation
Recommendation
depends
depends
on operating
on operating
conditions
conditions
Not recommended
Not recommended
Acetic acid
Acetic
10%
acid 10%
Air
TECHNICAL DATA Typical values for a thickness of 2 mm
Density
as
a guideline
the
The recommendations
The recommendations
mademade
here here
are intended
are intended
to beto
a guideline
be
a guideline
forfor
the
for
selection
the selection
of theof the
selection
ofquality.
a suitable
gasket.
function
ofofthese
suitable
suitable
gasket
gasket
quality.
Because
Because
theThe
function
the
function
andand
durability
anddurability
durability
of the
products
the products
depend
depend
uponupon
depends
number
ofused
factors.
a number
aproducts
number
of factors,
of factors,
theupon
data
the adata
may
not
maybe
not
be used
to support
to support
any warranty
any warranty
claims.
claims.
Acetamide
Acetamide
500 x 1400 (BA-R302)
0.5 | 1.0 | 1.5 | 2.0 | 3.0
(BA-202, BA-203, BA-50, BA-55, BA-U,
BA-CF, BA-M, BA-GL)
Chemical
Chemical
resistance
resistance
chart
chart
forfor
focus
focus
products
products
BA-202
BA-R302
BA-REM
BA-R300
BA-R
BA-REM
BA-REM
BA-R
BA-GL
BA-R
BA-GL
BA-M
BA-GL
BA-M
BA-CF
BA-M
BA-U
BA-CF
BA-CF
BA-U
BA-55
BA-U
BA-55
BA-50
BA-55
BA-50
BA-203
BA-50
BA-203
BA-202
1000 x 1500 | 1500 x 1500 (BA-R, BA-REM)
BA-203
BA-202
1500 x 1500 | 3000 x 1500 | 4500 x 1500
(BA-202, BA-203, BA-50, BA-55, BA-U,
BA-CF, BA-M, BA-GL)
Sheet Size
BA-202
TESNIT
DIMENSIONS OF STANDARD SHEETS