1. No category

BTU Research Battery Backed Injector – BTU-POI-UPS-2200 Series
“BROWNOUT BUDDY”
Highlights
Provides an Uninterrupted Power (over Ethernet) Supply and surge protection with no downtime switching
between primary PoE power and a built in battery backed UPS in the event of a power loss.
Product Overview
The BTU Research battery backed PoE Injector recognizes power disruptions and automatically switches the
power source from PoE power to an internal battery pack. Switching between power sources is
instantaneous, providing smooth, uninterrupted power to the system operations, where “always on” operating
is required. Access points, routers, Ethernet switches and IP addressable camera systems will
benefit with this power redundancy.
Features
Delivers PoE connectivity to endpoint devices
Meets UL 497A/B Surge Protection Standard for communication line safety and performance
Supports low voltage (down to 12V DC) non-compliant PoE devices
Nanosecond response time to surge, over-voltage, under voltage over current protection
Battery over-depletion protection preserves batteries and prevents over-depletion hazards
Incorporates “ideal diode” technology for near zero power loss.
Supports access points, repeaters, modems, routers, switches & IP addressable cameras
Sub milli-Watt standby power with near zero operating power losses for extreme efficiency
BTU-POI-UPS-2200 Series Benefits and Advantages
Just as standard PoE injectors have supplied efficient and cost effective power to Ethernet network devices,
the BTU-POI-UPS delivers the same efficient and cost effective power coupled with an internal UPS for
immediate back-up power when necessary. This device flexibility provides a solid redundant power
platform for networking hardware regardless of the remoteness of the installation and:
Provides cost benefits by eliminating separate UPS
A simplified installation for new installs and for replacing standard PoE injectors.
Is where an injector would be utilized.
Operates during a power failure for up to 11 hours
Recharges when utility power is restored
Reduce service calls by maintaining power to access points during power outages.
Ports
Cabling type
LEDs
Two RJ45 PoE ports: Power+Data - PSE-(in) PD-(out)
Category 5e or better
Channel Power (green)
Physical Interfaces
AC Input power
AC input voltage: 110VAC- 230VAC AC frequency: 50-60Hz
BTU Model Number
Output power
RJ-45 pin assignment and polarity
Output DCV
Nominal
Max
BTU-POI-UPS 2200/600
14.8
16.8
BTU-POI-UPS 2200/1100
18.5
21.0
BTU-POI-UPS 2200/1600
25.9
29.4
Power: Pins 4/5(+ positive), 7/8(- negative)
Pins 1,2,3 and 6 are data pins with no power present
Watts
Internal DC
supply
15
30
50
Max
output
10
25
47
Physical Specifications
Dimensions (L x W x H)
Weight
6 1/8” x 4 ½” x 2 ¼”
20 oz
Environmental
Power
AC input voltage: 100-240 VAC
AC frequency: 50-60Hz
12 to 24 VDC (Depending on Model)
Safety/Certifications
IEC-61000-4-2, 4-4, 4-5 ESD/EMI/EMC FCC Class B, CE, UL,
cUL-60950-1, EN60950-1, EMI/EMC:5502:2010 Class B
Operating temperature
-20° to 60°C
Storage temperature
Operating humidity
Storage humidity
Vibration & Shock
-40° to 85°C
20% to 90%
20% to 90%
10~3000Hz, 10 min/cycle, for 1 hr along each of the X,Y & Z axis, 2g-rms
Package Contents
* BTU-POI-UPS-2200 * AC Power Cord * DC Power Cord w/Phoenix Connector * Installation Guide
Minimum Requirements
* PoE endpoint device * Ethernet Switch for uplink connectivity * 2 ea. Cat5e or better patch cables
* Wiring Standards: EIA 568A and 568B
Warranty
BTU-POI-UPS-2200
3 Year Limited
Ordering Information
BTU-POI-UPS 2200/600
BTU-POI-UPS 2200/1100
BTU-POI-UPS 2200/1600
12V- 600mA-2200mAh Battery Backed (PoE) Injector
18V-1100mA-2200mAh Battery Backed (PoE) Injector
24V-1600mA-2200mAh Battery Backed (PoE) Injector