Download Report

Technical
Data Sheet
E6000® INDUSTRIAL ADHESIVE
Self-Leveling Formula (Clear)
PRODUCT DESCRIPTION
®
Eclectic Products, Inc.
Manufacturing Facility
101 Dixie Mae Drive
Pineville, Louisiana
eclecticproducts.com
800.349.4667
ISO 9001:2008
Compliant
Quality Management
Systems
Administration Office
Eugene, Oregon
eclecticproducts.com
800.693.4667
E6000 is a unique SELF-LEVELING, non-flammable industrial adhesive formulated to meet
high-performance requirements. It permanently adheres to more surfaces than virtually
any other adhesive, providing exceptional adhesion to wood, metal, glass, fiberglass,
ceramics, masonry, concrete, asphalt, leather, rubber, PVC, neoprene, vinyl and many
plastics. E6000 maintains its flexible bond in extreme cold temperatures, will not crack or
become brittle and is excellent for bonding items subject to vibration. For applications
that are exposed to direct sunlight, paint over E6000 after curing or use E6800 UV
formula.
WHERE TO USE / APPLICATIONS
-
general facility/building repair
flooring repairs
locking down fasteners against vibration
trailer repair
auto upholstery/paneling/molding
and much more!
FEATURES AND BENEFITS
EASY TO USE – easy squeeze tube (1.0 or 3.7 fl oz tube) or cartridge gun (10.2 fl oz cartridge)
FLEXIBLE – does not become brittle in cold weather and bonds items subject to vibration
CHEMICAL RESISTANT – safe for applications exposed to dilute acids and dilute caustics
ABRASION RESISTANT – great for bonding objects subject to normal wear
WATERPROOF – can be submerged in fresh and salt water after complete cure
PAINTABLE – paint to match surrounding area or to make UV resistant
TECHNICAL INFORMATION
PROPERTIES – Low / Medium / High Viscosity
Color:
VOC:
Solvent:
Non-flammable:
Density:
Solids:
Viscosity:
Tack time:
Set time:
Full cure time:
Storage:
Freeze/thaw stability:
Shelf life:
UNCURED MATERIAL
Clear
2.0 grams/liter
Perchloroethylene
Yes
11.0 +/-0.1 lbs/gal
30% by weight, 40% by volume
50,000 cps low / 100,000 cps medium / 200,000 cps high
~ 4 minutes
20 minutes*
Thin film: 24 hours / Thick film: 48-72 hours
Ideal temperature range: 50 to 80 °F (10 and 27 °C). Product may thicken
when stored in colder temperatures. If product thickens from colder
temperatures, warm to room temperature before use.
Stable, allow product to warm to room temperature before using
2 years (unopened)
*Depending on material, humidity and temperature.
®
E6000 Industrial - Clear | Rev 05 – Effective: 2015May / Approved: 35TMorgan
P a g e |1
Technical
Data Sheet
E6000® INDUSTRIAL ADHESIVE
Self-Leveling Formula (Clear)
Chemical resistance:
Hardness:
Dielectric strength:
Tensile strength:
Elongation:
Service temperature:
CURED MATERIAL
Excellent to water, dilute acids and dilute bases
80 Shore A
400V/mil (ASTM D-149); this is the maximum voltage that can be applied
to a given material without causing it to break down
2
3500 lb/in (ASTM D-412)
900% (ASTM D-412)
-40 to 150 °F (-40 to 66 °C)
ADHESION TEST – 180° Peel Strength Test - ASTM D 903
Aluminum
Birch (wood)
Glass
35 pli
40 pli
34 pli
Avg. Max Load Measured in pli (pounds per linear inch)
PVC
38 pli
Steel
45 pli
CHEMICALS THAT HAVE LITTLE OR NO EFFECT ON E6000®
Acetic acid (5% and 10%)
Ammonium hydroxide (3.4%)
Ammonium nitrate (50%)
Antifreeze
Beer (3.2% alcohol by volume)
Boric acid (3.1%)
Distilled water
Hydraulic oil
Lactic acid (3.8%)
Milk (fresh, tested at 40 °F)
Motor oil (30w)
Nitric acid (10% and 20%)
Oxalic acid (3.1%)
Phosphoric acid (30% and 60% as P2O5)
Potassium hydroxide (3.4%)
Sodium carbonates (2.7%)
Sodium chloride (10%)
Sulfuric acid (3% and 10%)
Wine (20% alcohol by volume)
Chevron solvent 1100
Chlorothane NU
Cyclohexane
Gasoline
Perchloroethylene
Propyl acetate
Toluene
®
E6000® exhibits excellent resistance to water, dilute acids and
dilute bases. Thin films of E6000 were immersed in various
chemicals for two weeks and exhibited weight gains of less than 2%
and tensile strength loss of less than 10%. These chemicals are
listed on the left. All percentages are given by weight unless
otherwise noted.
SOLVENTS THAT DISSOLVE E6000®
E6000 Industrial - Clear | Rev 05 – Effective: 2015May / Approved: 35TMorgan
These are common solvents that dissolve E6000® when hardened
samples were immersed. The dissolution with these solvents was
not instantaneous and therefore does not preclude usage in all
cases. Applications where an occasional splash or brief exposure is
expected may be acceptable. Test a small area before full use.
P a g e |2
Technical
Data Sheet
E6000® INDUSTRIAL ADHESIVE
Self-Leveling Formula (Clear)
DIRECTIONS and APPLICATION NOTES
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Read directions and test small area before use.
Surface should be clean, dry and free of dirt.
For tubes: Use pointer cap to puncture seal. For cartridges: Trim end of nozzle.
Puncture inner seal.
Product can be used between 50 and 90 °F (10 and 32 °C).
Apply directly to surfaces to be bonded or repaired. Allow 24 hours for curing—
Maximum bond strength may not be reached for up to 72 hours.
Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be
removed by cutting or scraping. For prolonged storage after opening; for easy cap
removal, apply a thin coat of petroleum jelly to the threads of the tube before
replacing cap; for cartridge, cover or plug the opening of the nozzle.
Product is paintable and immediately resistant to precipitation upon application.
HEALTH and SAFETY
United States | Contains perchloroethylene. Harmful if inhaled. May cause dizziness, headache or
nausea. Can cause skin and eye irritation. Intentional misuse by deliberately concentrating and
inhaling the contents may be harmful. Exposure may cause kidney damage. WARNING: This
product contains a chemical known to the State of California to cause cancer. Keep away from
heat and flame. Avoid breathing vapors. Use exhaust fan to remove vapors and ensure adequate
cross ventilation. Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.
First Aid: If you experience difficulty in breathing, move to fresh air. If symptoms persist, get
medical attention. If swallowed, do not induce vomiting. In case of eye contact, immediately flush
with plenty of water for at least 15 minutes. Keep out of reach of children.
Canada | FUMES MAY BE HARMFUL. MAY IRRITATE EYES. Do not breathe fumes. Do not get in
eyes or on skin. Use only in a well-ventilated area. Keep out of reach of children.
FIRST AID TREATMENT : Contains perchloroethylene. If swallowed, call a Poison Control Centre or
doctor immediately. Do not induce vomiting. If breathed in, move person into fresh air. If in eyes
or on skin, rinse well with water for 15 minutes. May cause dizziness, headache or nausea.
Intentional misuse by deliberately concentrating and inhaling the contents may be harmful. Open
windows and doors during application and curing.
Before working with this product, read and become familiar with information concerning hazards,
proper use and handling. SDS is available on line at:
eclecticproducts.com/downloads/sds-e6000-clear-english.pdf ;
eclecticproducts.com/downloads/sds-e6000-clear -french.pdf ;
eclecticproducts.com/downloads/sds-e6000-clear-spanish.pdf ;
to request a hard copy of the SDS, please send an e-mail to [email protected] or call
800.333.9826.
LIMITED WARRANTY
The product is warranted against any defect in materials or workmanship under normal use for a
period of 180 days after the date of purchase. The product is also warranted under any implied
warranties provided under applicable state law, including, without limitation, the implied warranty
of merchantability and the implied warranty of fitness for a particular purpose, for a period of 180
days after the date of purchase. This warranty covers only the original buyer of the product. For
warranty service, the buyer should contact the store where the product was purchased, or write
Eclectic Products, Inc., P.O. Box 4450, Pineville LA 71361 or call 800.767.4667. This warranty gives
you specific legal rights, and you also have other rights, which vary from state to state.
®
E6000 Industrial - Clear | Rev 05 – Effective: 2015May / Approved: 35TMorgan
P a g e |3