Download Report

1 page
PRODUCT
DATA
SHEET
PUMP CLEANER
For PU Resins
Description
Low viscosity dilutant to clean polyurethane injection
equipment, organic ester.
Application
Used as cleaning agent for pumps, hoses, containers
used for injection of polyurethane resins/grouts,
isocyanates, polyols.
Used to fill hoses and equipment to prevent moisture
contaminating the equipment.
Use
PU Pump Cleaner
Appearance
Clear Liquid
Viscosity at 25°C
13 - 15 mPas
20°C
Flashpoint
196°C
Density at 25°C
0.924
20°C
>200°C
7mBar
Boiling Point
Solid at
-68°C
Watersoluable at
<0.1
Biological degradation
Mg/l
Very Good
PU Pump Cleaner is used to clean PU injection
equipment, hoses, etc. Best to fill the cleaned
equipment with PU Pump Cleaner to prevent
moisture or other foreign materials to enter the
equipment. It can soften traces of solidified PU grouts,
but will not remove them. Cleaning needs to be done
before the pot life of the resins has expired.
Packaging and Storage
Store between 15°C and 30°C in unopened pails of
20kg. Shelf life is 12 months.
Safety Precautions
Prevent contact with skin, eyes and wear protective
clothing, googles and gloves.
Equus Industries Ltd
PO Box 4025, Dandenong Vic 3164
Phone: 03 9706 6226
Fax 03 9706 4880
Email: [email protected]
Web: www.equus.com.au
The information in this product data sheet is based on our experience and testing. It represents the latest information available at the time of
printing,
but no guarantee of its accuracy is made or implied, nor responsibility taken for use to which this information may be put. We reserve the
right to alter or up-date information parameters and formulations at any time without notice.