1. No category

Sunday
Welcome cocktail
19H-21h
Monday
Reception of participants
8H30
Opening session
9H00
Plenary conference of Prof. Philippe Dubois/ Chair: Manfred Stamm
Interface Control in Heterogeneous Polymeric
(Nano)Materials: macro-performance from nano-scale chemical tailoring
9H30
Pause
10H20
Chair: I. Kelnar
Chair: U. Wagenknecht
Chair: Y. Grohens
Chair: R. Williams
10H40
KN E. Abisset-Chavanne Multi-scale description of induced
properties in nanocomposites: from the nano-particle to the part
thorough the process
KN B. Vergnes Organoclay-based nanocomposites: from
processing to microstructure and rheological behavior
KN B. Favis Complex Morphologies in Multiphase Biopolymers
as a Route to High Performance Materials
KN D. Bielinski Rubber-Filler Interactions: Modification,
analysis and consequences
11h10
S. Charlon Impact of new extrusion process on improvement of
barrier properties of polyester/nanoclays nanocomposite films
M. Yamaguchi Rheological Properties of Polymer Melt
Containing Flexible Nanofibers
A. Bouzouita Development of toughened PLLA/PMMA bio-based
materials for automotive applications
11h30
F. Du Effect water-assisted extrusion process on the clay
migration, morphology, and rheological properties of immiscible
PA11/PEO blends
11H50
N. Le Moigne processing and characterization of PHBV/OrganoL. Sardo Modeling and numerical simulation of polymer flow in
clays nano-biocomposite foams by supercritaical carbon dioxide
a BUSS co-kneader
assisted extrusion
G. Normand The effect of extrusion conditions on the dispersion of
P. Bernard-Moulin How molecular spectroscopy helps
an organoclay in a polypropylene matrix
understanding polymers behavior and optimizing formulation
Plenary conference of Prof. Maurizio Fermeglia/ Chair: Jean François Gérard
M. Klüppel Reinforcement of Elastomers by Surface Modified
Carbon Black
Nano tools for macro problems: multiscale molecular
modeling of nanostructured polymer systems
Chair: E. Espuche
14H40
M.G. Battisti Study of the mechanical and thermal behavior of
polypropylene nanocomposites using the injection molding
compounder
15H00
T.Ougizawa Dispersion of Inorganic Oxide Nano-Particles into
Polymer Matrix
via Press-Drawing
Chair: E. Peuvrel-Disdier
Chair : B.Pukanszky
Chair: JF Gérard
M.Bouslah Cure monitoring of a phenolic syntactic foam using a R. Avolio Effects of physical aging and plasticizer distribution on P. Moldenaers How does geometrical confinement and viscosity
ratio affect the coalescence of droplet pairs in shear flow?
coupled Calorimetry-Dynamic Mechanical Analysis method
the properties of plasticized PLA
T. Guven Effect of Compatibilizer and r-PET Concentration on
the Mechanical Properties of Polyethylene/RecyclePoly(ethylene terephthalate) Blends
S. Fehri Properties of Plasticized Poly (lactic acid) (PLA)
containing a nucleating agent
M. Rueda Rheological properties of highly filled
ferrite/polypropylene composites in the molten state
Pause
15H20
15H40
F.-X. Perrin Preparation of new controlled release corrosion
inhibitive pigments
Lunch
12H10
13H50
K. Aleksanyan Production and investigation of biodegradable
compositions based on PLA and some polysaccharides
L. Klapiszewski Silica conjugated with lignin as a novel
functional fillers and hybrid materials
Plenary conference of Prof. Jean-François Gérard/Chair: M. Fermeglia
Tailoring Interfaces and Interphases as a Key
Issue for Designing Innovative Filled Polymers
Intervention of exhibitors
16H30
16H50
J. Pionteck Effect of Fillers and Rubbers on Curing of Epoxides
analyzed by PVT measurements
J.M. Martin Martinez Use of DMTA for the assessment of the
miscibility of EBA and EVA polymer blends intended for hot-melt
adhesives with improved properties
A.Taguet Essential work of fracture to evaluate toughness in
interfacially modified HDPE/TPS blends
S. Colonna Carbon Nanotubes migration and segregation at the
interface in immiscible polymer blends
17H10
B. Guenther Soares Ionic Liquid – Based Organically modified
Silica: Preparation and Application in Epoxy Thermoset Systems
A.Tada High-performance filler made from recycled PET by
microwave carbonization plant
F. Deleage Mechanical, rheological and morphological
properties of thermoplastic maize flour blends
M. Sahnoune Influence of the selective modification of
halloysite on the morphology of polyamide/polystyrene blends
Poster Session
17H30- 19H00
Tuesdays
8H30
Plenary Conference of Prof. Bela Pukanszky/ Chair: JP Pascault
Competitive interactions in polymer/lignin blends
Chair: B. Favis
9H20
9H40
10H00
Y. Kanake Functionalized nanofillers to enhance the thermal
conductivity and morphological structure of biopolymer based
nanocomposites
V. Massardier Silver and MWCNT based Polymer Composites.
Conductive properties and Skin
Effect observed by High Resolution Solid State NMR.
Chair: J.M.Martin-Martinez
Chair: I Chodak
F.X. Pierrot In situ polymerization of monomers into a polymer E. Peuvrel-Disdier Immiscible polymer ternary blends – Control
matrix by using an extensional flow mixing device
of the morphology
J. Li Carbonyl hydrosilylation reaction in polymer processing
conditions: Toward PBT/PMHS crosslinking and
compatibilization
Chair: J. Oberdisse
J.J. Robin Chemical modification of rare earth nanoparticles
M. Reulier Morphology and properties of renewable
M. Couty Effect of grafting on structure of highly-filled simplified
thermoplastics systems, based on polyamide and polyurethane
industrial nancomposites
synthesized from dimer fatty acids
V. Bourg Linear and branched PBS blends for packaging
A. Serghei Magnetic – electrical coupling approach to enhance the H.A. Khonakdar The Influence of Transesterification Reactions
appkications : from rheological behavior to functional properties
electric and dielectric properties of polymer composite materials
and nanoclay on Viscoelastic Properties of PET/PEN blends
of films
J. Moczo Factors influencing the impact resistance of
PP/elastomer/wood ternary composites
Pause
10H20
10H40
KN I. Kelnar Reinforcement and structure-directing effects of
nanofillers in polymer blends and related microfibrillar composites
KN U.Wagenknecht Electron Induced Reactive Processing – an
innovative tool for high performance multiphase polymer
materials
KN Y. Grohens New mesoporous materials based on
nanofibrillated cellulose-inorganic particles hybrid aerogels
KN R. Williams Functional materials based on nanostructured
epoxy networks
11H10
A. Rybak Hybrid graphene nanocomposites: an effective way to
enhance thermal and mechanical properties
V. Massardier New routes for polymer formulation with
γ–irradiation
A. Bergeret Challenges for the study of natural fibre/matrix
interface in biocomposites
A.S. Caro-Bretelle New hybrid Janus particles for
compatibilizing and structuring polystyrene/polyamide-6 blends
11H30
Z. Stary Rheology and electrical conductivity of carbon black filled
polymer blends with co-continuous structure
E. Prut Effect of powder rubber on structure and properties of
blends
G. Haddou Optimization of the interface of XLPE/Bamboo
powder composites
C. Kniesel Polymer Composition and Surface Treatment Effects
on Paintability of Polypropylene Bumpers
11H50
S. Anastasiadis Dynamics of Hyperbranched Polymers under
Confinement
12H10
H. Garay Design of hybrid core@shell nanoparticles for PMMA
transparent composites
M. Vasquez Thermal stabilization and morphology analysis for H. Angellier-Coussy PHBV/wheat straw fibres biocomposites for K. Jlassi Hairy fillers through sequential diazonium chemistry
PEI/PBT blends filled with fire retardant Sb2O3
food packaging
and surface-confined polymerization
A. Boukerrou Effect of alfa fiber and its cellulose used as
O. Herscher Development of a new dispersant suitable for ATH
reinforcement on poly (hydroxybutyrate-co-valerate) composites
to obtain a fire resistant polyester composite
properties
Lunch
12H30
14H10
Plenary conference Dr Klaus-Werner Stoeckelhuber/ Chair: J.M. Lopez-Cuesta
Chair: J. Soulestin
15H00
F. Laoutid Alumina nanoparticles as protective agent for enhanced
polyamide/polycarbonate blends
15H20
J.C. Majesté A Kinetic Model for Silica-Filled Rubber Reinforcement
Designing of Functional Rubber Nanocomposites
Chair: J.I. Velasco
Chair: P. Moldenaers
L. Quiroga Highly conductive thermoplastic based composites
J.P. Habas Development of epoxy formulations with versatile
poly (ether ketone ketone) / Silver nanowires for aeronautical properties from lipochemistry: study from the laboratory scale to
applications
the ultimate applications
P. Latko Electroconductive nanocomposites based on
copolyamides as materials for aerospace industry.
L. Le Pluart Ageing and recycling of short flax fibers LDPE
composites
G. Boiteux Piezoresistive stress sensitive polymer composites
with metallic conductive phase
Y. Hu Study on prediction elastic modulus of wood/PP
composites
by Nielsen equation and RoHM equation
K. Pielichowski Organic - inorganic hybrid materials: PU/POSS
case study
Pause
15H40
16H00
Chair: A.Bergeret
M. Stamm Functional nanocomposites with self-assembled
block copolymer templates
C. Schmitt Dispersion of modified silica nanoparticles in a
polyethylacrylate matrix following an original aqueous route
J.P. Habas Application of materials science for electrical
engineering: optimization of a composite formulation for railway
insulator
16H20
E. Peuvrel-Disdier Dispersion mechanisms of agglomerated fillers
M.B. Coltelli Recycled-Poly(lactic acid)/Recycled-Polycarbonate
in a rubber matrix :
blends and composites to foster the employment of ecological K. Renner Functionalization and modification of poly(lactic acid)
Contribution of in-situ observations
and renewable materials in the automotive field
A de Sà Polymeric Micellar Drug Carriers with Fluorescent
Properties
16h40
B. Strzemiecka Physicochemical characterization of lignin-SiO2
S. Kuciel Thermo-mechanical properties of composites based on
hybrids.
polyacetal filled by long basalt fiber
Thermo-mechanical analysis of composites with lignin-SiO2 fillers
S. Roland Confinement of ABC copolymer morphology via
forced assembly induced by multilayer coextrusion
17h00
A.C. Genix Multi-scale filler structure and dynamics in simplified
industrial styrene-butadiene nanocomposites combining SAXS and
BDS
A. Leuteritz Development of thermally conductive hBNPolyamide-6 composites
A. Meljon Microfibrous lignocellulosic fillers from grain byproducts as a reinforcement of thermoplastic composites
P. Sterling Processing and characterization of wood-plastic
P. Sotta Nucleation and growth of ordered copolymer structures
composites: effect of particle size on rheological, mechanical and
at reactive interfaces between PA6 and MA-g-HDPE
water uptake properties
17H20
Presentation of the next joint conference
17H40-18H50
Poster Session
19H00-21H00
"Terroir" Cocktail
Wednesday
8H15
8H30
Opening lecture of COST/EPB joint workshop by Prof. Paul Kiekens
Plenary conference of Prof. Giovanni Camino/Chair: Ph Dubois
Nanocomposites thermal and fire behavior: where
we are and where to go
Chair: J.J. Robin
Chair: J.P. Habas
Chair : K. Pielichowski
Chair: B. Kandola
9H20
J. Soulestin Effect of nanoparticle incorporation on amorphous and
crystalline fractions of polyamide 6 matrix
F. Toquet Effect of the naphthenic oil and precipitated silica on
the crystallization of UHMW-PE membranes for battery
separator application
K. Bula Silica/Lignin, an effective bio-based filler for PE-LD thin
film composites
J. Galy Halogen-free flame retardance of epoxy networks
modified with trisilanolphenyl POSS
9H40
J. Hari Halloysite nanotube as functional filler in polyethylene
nanocomposites
A. Gassiot-Talabot Cellulose whiskers dispersion in
poly(oxyethylene) matrix in internal mixer
M. Kaci Study of the Influence of PHBV-g-MA Compatibilizer on
the Morphology and Properties of PHBV/Olive Husk Flour
Composites
L. Haurie Evaluation of the interaction and synergisms of
expandable graphite and zinc borate in LDPE / synthetic
hydromagnesite formulations
10H00
S. Chatrabhuti Impact Modifier Toughening Polymeric Capsules for S. Grigorian Temperature and Time Dependent Characterization
M. Cochez Investigation on effect of ZrO2, sepiolite and MMT on
D. Battegazzore Rice husk as bio-source of silica and cellulose
rheology and char residue formation of PMMA composites
Self-healing Concrete: A Study on Type and Content of Impact
of the Structural and Electrical Properties of
for PLA bio-composites
during combustion
Modifier
Polythiophene:Fullerene Bulk Heterojunction
Pause
10H20
10H40
KN J.M. Martin-Martinez Influence on curing of vinyl ester resins
by adding graphene nanoplatelets
KN J.I. Velasco Multifunctional foams from particulate
composites
KN A. Müller Effects of polycaprolactone topology (ring versus
linear) and carbon nanotubes functionalization on the
supernucleation and antinucleation effects of PCL/CNT
nanocomposites
KN A. Boudenne Enhancement of thermophysical properties of
polymer composites using conductive fillers and magnetic field
11H10
C. Oueiny Polyaniline/polyvinylbutyral blends for corrosion
protection: The “smart” release of the decylphosphonic acid dopant
N.A Abdel Zaher Effect of fast neutrons on the structural and
thermal properties of poly(vinyl alcohol) and hydroxypropyl
methyl cellulose blends
M. Gonzalez Rheology and Crystallization Behavior of
Polylactide/Poly(methyl methacrylate)/Mineral Filled Blends
H.W. Marx Determination of thermophysical properties of
polymers
11H30
M. Salzano de Luna Plate-like nanoparticles as a vehicle to
manipulate the morphology of immiscible polymer blends
Z. Benabdelghani Production of Hydrogen Using HeteroSystem: Polypyrrole/TiO2 Under Visible Light
S. Benali New strategy for the preparation of polylactide/starch
nanoplatelet nanocomposites
11H50
12H10
A.J. Kadham Algidsawi Structural and optical studies on blend of
E. Espuche Optimization of barrier properties of transparent PLA
M. Varga Electrical conductivity of polypyrrole nanotubes/silver
polyvinyl acetate and poly vinyle alcohol filled with Potassium
films through specific location and assembly of lamellar
composites
dioxalato Cooperate (II) di hydrate
nanofillers
A. Cataldo/M. Mastrucci Structural investigation and
J.K. Palacios Tailoring the properties of PP/PA6 blends: addition of mechanical properties of epoxy resins nanocomposites through
solid state NMR and nanoindentation
nanosilica and compatibilizer agents
Chair: F. P. La Mantia
14H30
14H50
A. Saiter Calorimetric investigations on semi-crystalline
compatibilized polylactide/clay nanocomposites
R.Sonnier Predicting the heat release rate in cone calorimeter
of non-charring polymers flame retarded with fillers
Lunch
12H30
14H00
T. Jesionowski Synthesis of advanced chitin-POSS materials
prepared via solvothermal method
L. Rivière Thermal Conductivity and Specific Heat Capacity of
PEEK / Ag Nanoparticles
Chair: A. Müller
Chair: L. Ferry
KN G. Santagata Enhancement of interfacial adhesion between
Starch and Poly(ε-caprolactone: strategies of chemical
compatibilization
KN R. Hull The fire retardant mechanisms of mineral fillers
A. Benhamida Morphology and Mechanical Properties of
Polyamide 11/OMMT Nanocomposites
A. Witkowski Microscale Investigation of the Interaction of EVA
with Fire Retardant Mineral Fillers
Chair: G. Boîteux
KN P. Pötschke Localization behavior of graphene nanoplatelets in KN M. Omastova Carbon nanofillers composites for advanced
PC/SAN polymer blends and their melt rheological properties
applications
M. Perez Towards a Kinetic Theory Description of Electrical
Induced Properties in Perfectly Dispersed CNTs Nano-Composites
E.D. Vogli Carbon Nanotube based Textiles for High Risk
Professions:
A new method to evaluate CNT loading in Polymer Nanocomposites
by Raman Spectroscopy
I. Chodak Similarities between elastomeric and thermoplastic
matrices in the structure of reinforcing carbon black filler
network
C. M. Gomez Novel method to obtain PEDOT/ DWCNT
nanocomposites for thermoelectric applications
A. Frache Bio-based polyamide composites: morphological study A.Viretto Selective dispersion of nanoMDH in polymer blends:
Relationship between morphology and fire behavior
and mechanical properties evaluation
15H10
J. Vuorinen Changes in thermal properties of MWCNTs by
aqueous sonication
A.S. Luyt Influence of electron beam irradiation on the thermal,
mechanical and conductivity properties of EVA/expanded
graphite (EG) and PP/EG composites
D. Lourdin Effect of confinement on mechanical relaxation of
starch-clay bionanocomposites
U. Cabulis Expandable Graphite as Passive Flame Retardant for
Polyurethane Foams
15H30
U. Staudinger Structure-property correlations in styrene-based
block copolymers containing carbon nanotubes
I. Krupa Phase change materials based on linear low-density
polyethylene, paraffin wax and expanded graphite
S. Kennouche Study of halloysite
nanotubes/poly(hydroxybutyrate-co-valerate)
(PHBV)/poly(butylene succinate) (PBS) ternary nanocomposites.
F. Cavodeau Influence of colemanite and glass frit on the
barrier effect of EVA/ATH composites during fire testing
Pause
15H50
A.M. Grancaric Phosphorous Based Compounds and Urea in
Development of Cotton Flame Retardancy
16H10
M. Omastova Surface Properties and Stability Conductive
Textiles
Visits of Montpellier and free time
16H30
16H50
KN B. Kandola Fire retardant glass fibre -reinforced
unsaturated polyester - resole phenolic blended matrix
composites
17h20
Poster Session Joint Workshop COST
17H50-20H00
Visits of Montpellier and free time
Conference dinner
20H00-23H00
Thursday
8H30
Plenary conference of Dr. Bruno Dufour
products from conventional processes: From composites to batteries
Non conventional
KN Deyi Wang Functionalization of Nanomaterial: An Efficient Way to Kill Fire
Chair: Ph Cassagnau
8H50
9H20
J.J. Flat Grafting of amino-terminated PEG onto maleated
A.Causa Using clay nanoparticles to control the morphology and
polyolefins : a new route towards nano-structured materials by a
enhance the performances of blends of recycled polymers
reactive extrusion process for new breathable materials
9H40
H. Moustafa Investigation of morphology, mechanical, thermal
and flame properties of EVA/EPDM blend by combination of
organoclay with Na+- tripolyphosphate
10H00
Y. Rosetti Toughness of transparent but micro- and nanostructured Thermoplastic / Epoxy Blends. Case of polyether-sulfone
/ High Tg epoxy blends
11H
11H20
A. Cayla Interest of wood waste (lignin) as flame retardant fillers
in natural based polymers (PA11 and PLA)
M. Batistella Fire Behavior of Polypropylene/kaolinite
composites
A. Hassan Thermal, Flammability and Mechanical Properties of
Kenaf Fibers Reinforced Unsaturated Polyester/Phenolic Resin
Composites
D. Ruch Nanocomposite (multi)functional surfaces: various
X. Wang Influence of Organo-Modified MgZnAl-LDH on the Char
B. Prieur Modified lignin: a promising bio-based flame retardant
strategies to efficiently incorporate nanoparticles in atmospheric
Formation and Smoke Suppression of Intumescent Flame
for polymeric materials
plasma-polymerized thin films
Retardant Polypropylene Composites
B. Arrotin Use of induction heating for the elaboration of
structured functional polymer coatings by SI-ATRP on Nitinol
substrates
M. Jimenez Ageing of flame retarded PLA
H. Yin Comparing Different Routes to Halogen-free Flame
Retardant Wood-Plastic Composites
P.O.Bussière Thermal degradation of polymer/ATH composites
C. Vincent Multi-scale characterization and modeling of the
burning behavior of household materials
M. Matar Influence of modified mesoporous silica SBA-15 on
flammability of polyethylene intumescent composites
C. Chivas-Joly INcineration of NANOmaterials and release of
Particles
Pause
10H20
10H40
L. Costes Flame retardancy of PLA composites containing
cellulose/phosphorus combinations
A. Ditta Characterization of the thermal degradation of
polyoxymethylene based nanocomposites
A. Pazat Chemical Modification of Graphite Oxide Sheets and Their
Uses in Elastomer Nanocomposites
A. Bharati Understanding the effect of compatibilization on
conductivity and phase separated morphology in a polymer blend
with carbon nanotubes
Chair: J.Vuorinen
J. Sahyoun Synthesis of Fire Retarded PA66-PA6 Copolymers by G. Ounoughene Combustion of a polysiloxane nanocomposite:
Association of Sol-Gel Chemistry and Reactive Extrusion
study of two scenarios
Chair: M.Stamm
Chair: M.Omastova
11H40
Conference closing
12h00
Lunch
Session 1
Session 2
Session 3
Session 4
Session 5
Session 6 & 7
Session 8 & 9
Filler Modification, Interfaces and Interphases
(Reactive) processing, rheological properties and recycling
Nanofillers and Nanocomposites, Nanofillers in polymer blends
Nanostructured and self assembled polymer for Functional materials
Thermophysical properties, Thermal stability and Fire retardancy of blands and filled polymers
Natural based and biodegradable polymer blends, Filled biocomposites
Polymer composites and multi-materials for weight saving, Polymer for energy (foams, membranes, conductive composites)
Chair G.Camino