1. business and industrial
2. chemicals industry
3. adhesives

2015 SUPPLEMENTAL CATALOG
TIME TESTED
AND PROVEN
For more than 40 years
QUALI
T
SINCE Y
1972
For All Your Automotive Needs!
www.dominionsureseal.com
CONTENTS
Dominion Sure Seal Ltd.
Established in 1972, Dominion Sure Seal Ltd. celebrates 40 years of delivering quality,
innovative products into the Automotive, Marine, Industrial and Farming Industries.
The cornerstone of our company is our team who strive to build trusting relationships
through shared feedback and continuous improvement. Our promise to deliver
superior service, training and products assures our customers’ success.
TABLE of CONTENTS
Prep Materials & Cleaners ......................................................................... Page 3
Specialty Products .................................................................................... Page 4 & 5
Adhesion Promoter, Primers, Bumper Stripper, Specialty Topcoats (Trim Black, Instant Clearcoat, DOM 16)
Bedliners & Accessories............................................................................ Page 6
Chip Guard, Gravel Guards & Sound Deadening ......................................... Page 7
Undercoating & Anti-Corrosion .................................................................. Page 8
Seam Sealers ........................................................................................... Page 9
Repair Materials & Adhesives .................................................................... Page 10
Equipment ................................................................................................ Page 11
Schutz Guns, 300 mL Caulking Guns, 200 mL Applicator Gun, Spray Equipment
Accessories & Sprayable Masking ............................................................ Page 12 & 13
Spray Guns, Spray Gun Maintenance, Wands, Guide Coat, Paint Suits
Cleaning Solvents & Reducer .................................................................... Page 14
Rust Check – Rust Control, Paint & Primer ............................................... Page 15
2
PREP MATERIALS
LOW VOC WAX & GREASE REMOVER
Stock / Code
Description
Removes wax, grease, silicone, tar and other
contaminants. Use on bare metal, existing finishes or
primed surfaces as a final wipe, prior to painting.
LVAPC / 8010
Low VOC Wax & Grease Remover
3.78 L / 1 Gal U.S.
LVAPC5 / 8012
Low VOC Wax & Grease Remover
18.9 L / 5 Gal U.S.
CITRUS BASED PANEL PREP
Stock / /Code
Description
Designed to remove all solvent and water based
contaminants from interior and exterior plastic parts.
Size
Size
SPD / 240155
Citrus Based Panel Prep
270 g / 9.5 oz
Stock / Code
Description
BSS / 10058
Sure Solv Universal Solvent & Cleaner
1 L / 33.8 fl oz U.S.
BSS1 / 10056
Sure Solv Universal Solvent & Cleaner
4 L / 1.06 Gal U.S.
BSS5 / 10057
Sure Solv Universal Solvent & Cleaner
18.9 L / 5 Gal U.S.
SUS / 10050
Sure Solv Universal Solvent & Cleaner
454 g / 16 oz
CLEANERS
SURE-SOLV UNIVERSAL SOLVENT CLEANER
Unique solvent blends safely and effectively removes
sealants, adhesives, waxes and most other contaminants
from painted and non-painted surfaces. Ideal for cleaning
up uncured urethanes, with no mess. Will also remove
stains and grease spots from interior fabrics and
upholstery.
SPRAY GUN PAINT REMOVER
Spray Gun Paint Remover will keep paint guns running
smoothly, saving time, labor and material.
Spray Gun Paint Remover is an easy to use economical
product for removing paint from spray guns after painting.
Pinpoint spray. Quickly dissolves paint.
PAINT OFF HAND CLEANER
A waterless hand cleaner formulated with natural cleaning
agents and pumice scrubbers that will gently remove the
most difficult products from your skin, while the Lanolin,
Aloe Vera and Glycerin, combine to keep skin from drying
out. Performs very well on urethane, paints, epoxies,
polyesters, tar and grease.
Stock / Code
Description
SSGC / 10065
Spray Gun Paint Remover
Size
Size
425 g / 15 oz
Stock / Code
Description
Size
CUSO / 11019
Paint-Off Hand Cleaner
500 mL / 16.9 fl oz U.S.
CUSOB / 11020
Paint-Off Hand Cleaner
2.5 L / 0.66 Gal U.S.
TCUSOP / 11018 Pump
3
SPECIALTY PRODUCTS
ADHESION PROMOTER
ADHESION PROMOTER
Stock / Code
Description
SXPP24 / 420701
Adhesion Promoter
480 g / 16.9 oz
XPPPQ / 400100
Adhesion Promoter
1 L / 33.8 fl oz U.S.
XPPP1 / 400101
Adhesion Promoter
3.78 L / 1 gal U.S.
Stock / Code
Description
SEP / 24008
One Step Self Etch Primer - Grey
425 g / 15 oz
SEP1 / 24009
One Step Self Etch Primer - Black
425 g / 15 oz
HI-BUILD ZINC WELD THRU PRIMER
Stock / Code
Description
A very fast drying, anti-corrosive coating that is normally
applied to metal surfaces prior to welding.
SZC / 24090
Zinc Weld-Thru Primer
410 g / 14.5 oz
SCW / 24080
Copper Weld-Thru Primer
410 g / 14.5 oz
Stock / Code
Description
SHBP / 24016
1K Hi-Build Primer - Grey
Adhesion Promoter is formulated to create a chemical bond
on ‘difficult to bond’ plastics, allowing adhesion of repair
fillers and coatings to these substrates. Adhesion Promoter
is also used as an excellent “sealer” for all Flexible and SemiRigid plastics including TPO and TPE.
Size
PRIMERS
ONE STEP SELF ETCHING PRIMER
ONE STEP is a high build, easy to use self etch primer that
provides excellent adhesion to steel, stainless steel and
aluminum. Compatible with all primer surfaces for spot
repair and refinishing.
Available in Grey and Black
COPPER WELD-THRU PRIMER
Size
Size
Copper Weld-Thru Primer is designed to eliminate the
corrosion that forms between welded substrates. It has
excellent adhesion and the copper enriched formula
provides superior conductive properties that minimize the
heat zone, which reduces distortion and welding splatter.
1K HIGH BUILD PRIMER
1K HIGH BUILD PRIMER is designed for easy and convenient
priming of metal and plastic parts. This primer helps prevent
rust and seal out moisture, while providing a smooth base for
topcoat application. 1K HIGH BUILD PRIMER is fast drying,
provides excellent fill and build, and is very easy to sand.
Compatible with virtually all automotive paints.
4
Size
454 g / 16 oz
NEW
Imp W
ro
Form ved
ula
SPECIALTY PRODUCTS
BUMPER STRIPPER
BUMPER STRIPPER
Stock / Code
Description
BUMPER STRIPPER’s viscous consistency clings to the
bumper without sagging. It is designed to totally remove all
refinish material but not the original factory-baked finish.
SBS / 24019
Bumper Stripper
Size
482 g / 17 oz
SPECIALTY TOPCOATS
INSTANT CLEAR COAT
Stock / Code
Description
SIC / 24042
Instant Clear Coat 1K
TRIM BLACK
Stock / Code
Description
TRIM BLACK restores faded and peeling paint on exterior
trim parts. This product self etches to ensure proper bonding
to the substrate. Trim Black offers superior adhesion to
metal, stainless steel and chrome.
Available in Semi-Gloss & Flat Black.
STW1 / 24003
Trim Black - Semi Gloss
425 g / 15 oz
STW2 / 24007
Trim Black - Flat
425 g / 15 oz
1K clear designed for small spot and panel repairs. This
ready-to-use aerosol is fast drying and provides an excellent
gloss. For use on replacement parts, door jambs, hood and
trunk jambs and cut ins.
DOM 16 RUST PREVENTATIVE COATING
DOM 16 is a rust preventive coating. It’s an extremely hard
protective coating that’s suitable for all ferrous (porous) and
other metals. When DOM 16 is applied over the rusted
surface, it penetrates and kills off the rust until it reaches the
surface below. The metal dehydrates allowing DOM 16 to
harden so nothing can penetrate it.
A MAJOR
TRIBUTE!
Stock / Code
Description
Size
340 g / 12 oz
Size
Size
DOM16P / 10048
DOM16 Rust Preventive Coating - Black
473 mL / 16 fl oz U.S.
DOM16Q / 10049
DOM16 Rust Preventive Coating - Black
946 mL / 16 fl oz U.S.
DOM16CP / 10041
DOM16 Rust Preventive Coating - Clear
473 mL / 16 fl oz U.S.
DOM16CQ / 10040
DOM16 Rust Preventive Coating - Clear
946 mL / 16 fl oz U.S.
DOM16GP / 10053
DOM16 Rust Preventive Coating - Grey
473 mL / 16 fl oz U.S.
DOM16GQ / 10052
DOM16 Rust Preventive Coating - Grey
946 mL / 16 fl oz U.S.
Dom 16, which is rated the toughest rust preventive sealant
in the world, is shown here after being applied to parts of the
rusted and destroyed world trade centre.
Various pieces were sent around the USA as a constant
reminder of this terrible tragedy. This piece is on
permanent display in Wellington, Florida.
5
PROFESSIONAL
BEDLINERS & ACCESSORIES
SHAKE & SHOOT BEDLINER
Easy to use, this multi purpose coating can be
sprayed using a Dominion Sure Seal Schutz Gun, or
applied using a brush or roller on virtually any
surface to provide a tough, durable finish, with
excellent UV resistance.
OEM Approved Chrysler Group Bulletin #31-008-12.
Available in black and tintable kits.
Stock / Code
Description
Size
BSSBL / 1216
Shake & Shoot 2 Part Kit – Black
BSSBLT / 1235
Shake & Shoot 2 Part Kit – Tintable
3.6 L / 0.95 gal U.S.
BSSBL1S / 1217
Shake & Shoot Single Can Kit - Black
1 L / 33.8 fl oz U.S.
BSSBLT1S / 1219
Shake & Shoot Single Can Kit - Tintable
900 mL / 30.4 fl oz U.S.
4 L / 1.06 gal U.S.
LOW
VOC
HIPPO-LINER BEDLINER KITS
A urethane based protective coating that can be used
on truck beds, trailers, hoppers, boats, off-road
vehicles, and RVs. This rugged coating not only looks
good, it protects surfaces against a wide range of
extreme conditions and offers excellent UV resistance.
Can be applied with a Schutz Gun or a roller.
OEM Approved Chrysler Group Bulletin #31-008-12.
Available in black and tintable kits.
GATOR GUARD II BEDLINER
Epoxy formula Dominion Sure Seal Gator Guard II is a
superior quality epoxy/urethane blended liquid
bedliner for uses such as pick up trucks, buses,
vans, delivery vehicles, construction equipment,
concrete floors, farm equipment, off the road
construction equipment, marine and many other
uses.
Does not contain isocyanates.
Available in black.
EZ LINER
Non flammable, non toxic, zero VOC, anti-skid,
inexpensive. EZ Liner is easy to apply. Simply pour
anti skid material into liquid resin, stir and apply by
spray-on, roll-on or brush-on. One kit is enough
material for one large size truck bed.
Stock / Code
Description
Size
BHBLUR / 10001
Hippo Liner Kit - Black
1.7 L / 0.45 gal U.S.
BHBLCR / 100500
Hippo Liner Kit - Black
1.7 L / 0.45 gal U.S.
BHBLURLV / 10003
Hippo Liner Low VOC Kit - Black
BHBLX2 / 100200
Hippo Liner Kit - Black
6.8 L / 1.8 gal U.S.
BCYH / 100600
Hippo Liner Kit - Tintable
1.7 L / 0.45 gal U.S.
BCYHLV / 100605
Hippo Liner Low VOC Kit - Tintable
1.7 L / 0.45 gal U.S.
Stock / Code
Description
BGG2 / 100096
Gator Guard Kit - Black
BGG21 / 100097
Gator Guard Kit - Black
6.8 L / 1.8 gal U.S.
BGG2LV / 10086
Gator Guard Low VOC Kit - Black
1.7 L / 0.45 gal U.S.
BGG21LV / 10087
Gator Guard Low VOC Kit - Black
6.8 L / 1.8 gal U.S.
BGG2W / 100098
Gator Guard Kit - White
1.7 L / 0.45 gal U.S.
BGG21W / 100099
Gator Guard Kit - White
6.8 L / 1.8 gal U.S.
Stock/Code
Description
BEZLG / 100105
EZ liner Kit - Black
1.7 L / 0.45
LOW
VOC
Size
1.7 L / 0.45 gal U.S.
LOW
VOC
Size
3.78 L / 1 gal U.S.
LOW
VOC
ACCESSORIES
NYLON CUP BRUSH
WIRE TAPE
Dominion Sure Seal durable Nylon Cup Brush,
cuts sanding time by up to 50%. Creates 80-120
grit scratch pattern. Works with a standard 5/8"
thread buffer/polisher at 1000 to 1400 RPM's.
Stock TNBC / Code 208
Our wire tape is intended for use with all
of our bedliner products. Using our wire
tape you can beassured of a perfect line
every time. Size: ¼” x 100’
Stock WBWT / Code 3086
6
SCHUTZ GUNS
Dominion Sure Seal
"Schutz" Guns for
Undercoatings, Gravel
Guard and Bedliners.
See Schutz Guns page
CHIP GUARD & GRAVEL GUARD
CRYSTAL CLEAR 2K CHIP GUARD
An extremely durable, non yellowing, protective clear
coating that can be used on any finished surface that
you want to protect against UV Rays or road debris such as rocks, gravel, and sand. Sprays similar to a
urethane clear, and can be wet sanded and buffed if
necessary. No special equipment required. Use on
motorcycles, cars, motor homes, trucks and off road
vehicles.
Stock / Code
Description
BCG4 / 101004
BCG4G / 101007
Crystal Clear 2K Chip Guard
Crystal Clear 2K Chip Guard
Size
946 mL / 32 fl oz U.S.
3.78 L / 1 gal U.S.
CRYSTAL-CLEAR 2K CHIP GUARD is a specially formulated protective clearcoat,
designed to protect the vehicles most exposed areas such as front bumbers, hoods,
grills, headlights and side mirrors against rocks, gravel and other road debris.
GRAVEL GUARDS & SOUND DEADENING
BLACK GRAVEL GUARD
An easy to use, paintable rocker coating, that matches
OEM textures and provides excellent abrasion and chip
protection, sound deadening, and corrosion resistance.
Ideal for applications where a fine or medium texture is
desired.
Available in Schutz can or aerosol
SILVER GRAVEL GUARD
An easy to use high build, paintable rocker coating, that
matches OEM textures and provides excellent abrasion
and chip protection, sound deadening, and corrosion
resistance. Ideal, where a medium to coarse texture
desired. Available in Schutz can or aerosol
Stock / Code
Description
Size
BVG1 / 103710
Gravel Guard - OEM Approved - Black
SVG1 / 240081
Gravel Guard - OEM Approved - Black aerosol
405 g / 14.3 oz
SVG124US / 240080 Gravel Guard - OEM Approved - Black aerosol
503 g / 17.7 oz
830 mL / 28.1 fl oz U.S.
BVG11 / 103720
Gravel Guard - OEM Approved - Black
3.78 L / 1 gal U.S.
BVG2 / 1039
Gravel Guard - OEM Approved - Silver
830 mL / 28.1 fl oz U.S.
SVG2 / 24005
Gravel Guard - OEM Approved - Silver aerosol
BVG3 / 1005
Gravel Guard - OEM Approved - Beige
SVG3 / 24006
Gravel Guard - OEM Approved - Beige aerosol
550 g / 19.4 oz
SVGC / 240085
Gravel Guard - OEM Approved - Clear aerosol
454 g / 16 oz
BVGWB / 103799
Gravel Guard - OEM Approved - Black
BEIGE GRAVEL GUARD
405 g / 14.3 oz
830 mL / 28.1 fl oz U.S.
830 mL / 28.1 fl oz U.S.
See Applicator Guns on Page 10
An easy to use, paintable rocker panel coating, that
matches OEM textures and provides excellent abrasion
and chip protection, sound deadening, and corrosion
resistance. Ideal for applications where a finer texture is
desired. Available in Schutz can or aerosol
CLEAR GRAVEL GUARD
A unique very tough and resilient stone chip protector
that is crystal clear. Can be applied directly over the
painted surface to protect the paint from stone chips,
abrasion, sand, etc. Available in aerosol
WATERBASE GRAVEL GUARD
Proprietary resins in this unique formula can be
topcoated within 10 to 30 minutes. Low VOC and
environmentally friendly. Compatible with all automotive
paints. Formulated and packaged for Schutz style
gun application
EUROPEAN SOUND DEADENING PADS
Dominion Sure Seal PAINTABLE sound deadening pads
are approved by General Motors Corporation and are
described in several GM bulletins. Dominion Sure Seal
European Sound Deadening Pads are non flammable
and paintable.
LOW
VOC
Stock / Code
Description
BSDE / 100901
OEM Approved Sound Deading Pads 7 3/4” x 19 3/4” / 20 cm x 50 cm
Qty
10 sheets
7
UNDERCOATINGS
& RUST PREVENTION
UNDERCOATINGS
OEM APPROVED ASPHALT-BITUMEN
BASE UNDERCOATING
Stock / Code
Description
An economical non-paintable, asphalt based undercoating
that provides excellent abrasion resistance, sound
deadening and corrosion protection. Black.
BUF / 1004
BUF1 / 1089
BUF5 / 1025
SUF / 240040
SUFV / 240041
BUP / 1028
SUP / 24013
SUP20 / 24012
BUR / 1008
BUR5 / 1030
SUR / 240051
Fast Dry Rubberized Undercoating
Fast Dry
Fast Dry
Fast Dry Rubberized Undercoating - Aerosol
Black Low VOC Undercoating - Aerosol
Asphalt Undercoat
Asphalt Undercoat - Aerosol
Black Asphalt Undercoat - Aerosol
Rubberized Undercoat
Rubberized Undercoat
Rubberized Undercoat - Aerosol
See Applicator Guns on Page 10
OEM APPROVED RUBBERIZED
UNDERCOATING (SUPER PROTECTOR)
EASY TO USE HIGH build undercoating, can be used as
rocker panel coating, sound deadening with excellent
corrosion resistance. Black.
FAST DRY RUBBERIZED
UNDERCOATING
Fast dry paintable, rubberized undercoating that dries fast
and provides excellent abrasion protection, sound
deadening and corrosion protection. Black.
Size
830 mL / 28.1 fl oz U.S.
3.78 L / 1 gal U.S.
18.9 L / 5 gal U.S.
405 g / 14.3 oz
503 g / 17.7 oz
830 mL / 28.1 fl oz U.S.
550 g / 19.4 oz
510 g / 18 oz
830 mL / 28.1 fl oz U.S.
18.9 L / 5 gal U.S.
550 g / 19.4 oz
LOW VOC RUBBERIZED UNDERCOATING
VOC compliant rubberized undercoating that dries fast and
provides excellent abrasion protection, sound deadening
and corrosion protection. Black.
LOW
VOC
ANTI-CORROSION
ANTI-CORROSION SEALER
ANTI-CORROSION SEALER is available in amber and
black rustproofing to match the OEM appearance, while
providing superior rust protection. Abrasion resistant
coating will flow into hard to reach seams. Designed for
replacement panels or new car rustproofing, and restores
the repair of existing corrosion protection to original
specifications found on the interior of fender and panel
replacements.
NO DRIP RUSTPROOFING
NO DRIP RUSTPROOFING is available in amber and black
rustproofing to match the OEM appearance, while
providing superior rust protection. Abrasion resistant
coating will flow into hard to reach seams. Designed for
replacement panels or new car rustproofing, and restores
the repair of existing corrosion protection to original
specifications found on the interior of fender and panels
replacements.
8
Stock / Code
Description
Size
ASS512A / 1012
Anti-Corrosion Sealer - Amber
830 mL / 28.1 fl oz U.S.
ASS512B / 1013
Anti-Corrosion Sealer - Black
830 mL / 28.1 fl oz U.S.
ASS512B4L / 1018
Anti-Corrosion Sealer - Black
4 L / 1.06 gal U.S.
ASS512C4L / 1020
Anti-Corrosion Sealer - Amber
4 L / 1.06 gal U.S.
ASS512CP / 1019
Anti-Corrosion Sealer - Amber
18.9 L / 5 gal U.S.
ASS512BP / 1016
Anti-Corrosion Sealer - Black
18.9 L / 5 gal U.S.
Stock / Code
Description
Size
ASS512SC4L / 1023
No Drip Rustproofing - Amber
4 L / 1.06 gal U.S.
ASS512SB4L / 1024
No Drip Rustproofing - Black
4 L / 1.06 gal U.S.
ASS512SCP / 10131
No Drip Rustproofing - Amber
18.9 L / 5 gal U.S.
ASS512SBP / 10121
No Drip Rustproofing - Black
18.9 L / 5 gal U.S.
ASS512SCK / 1010
No Drip Rustproofing - Amber
60.6 L / 16 gal U.S.
ASS512SBK / 1015
No Drip Rustproofing - Black
60.6 L / 16 gal U.S.
SEAM SEALERS
SEAM SEALER (SINGLE COMPONENT)
JOINT & SEAM SEALER
JOINT & SEAM SEALER’s are one part, low cost, high
performance, hi-solids sealants. The cured sealant has
excellent adhesion and flexibility, and can be used on a variety
of surfaces including painted and non painted metal, rubber,
glass, wood, concrete. Non staining. Use for all sealing
applications in vertical and horizontal joints. Very Economical.
Paintable.
PAINTABLE JOINT & SEAM SEALER
Stock / Code
Description
Size
CSB / 9003
Sure Seal Joint & Seam Sealer - Black
300 mL / 10.6 fl oz
CSC / 9001
Sure Seal Joint & Seam Sealer - Clear
300 mL / 10.6 fl oz
CSG / 9004
Sure Seal Joint & Seam Sealer - Grey
300 mL / 10.6 fl oz
CSW / 9002
Sure Seal Joint & Seam Sealer - White
300 mL / 10.6 fl oz
Stock / Code
Description
CSBA / 901003
Paintable Joint & Seam Sealer - Black
300 mL / 10.1 fl oz U.S.
CSWA / 901002
Paintable Joint & Seam Sealer - White
300 mL / 10.1 fl oz U.S.
HI-TEK FINESSE SEAM SEALER
Stock / Code
Description
Fast setting in thirty minutes. Works wet or dry. Excellent
tooling and feathering qualities.
Compatible with all paints
CSN / 9005
Hi-Tek Finese Seam Sealer - Beige
Single component, high performance, high solids sealer.
Production Sealer exhibits very good physical properties,
excellent adhesion to most surfaces including painted and non
painted metal, rubber, glass, wood, concrete. Use for all
sealing and adhesive applications in vertical and horizontal
joints.
Size
Size
300 mL / 10.1 fl oz U.S.
EPOXY SEAM SEALER (TWO COMPONENT) ZERO VOC
CONTROL FLOW SEAM SEALER
Stock / Code
Description
Ideal for seams, drip rails, trunks and filling voids. The
control flow formula offers a higher build, while reducing
running. Work time 5-10 minutes. Paintable in 30-40
minutes.
XSM16002 / 16002
Control Flow Epoxy Seam Sealer - Beige
207 mL / 7.0 fl oz U.S.
XSM8002 / 8002
Heavy Body Epoxy Seam Sealer - Black
207 mL / 7.0 fl oz U.S.
XSM9002 / 90002
Self Leveling Epoxy Seam Sealer - Black
207 mL / 7.0 fl oz U.S.
HEAVY BODY EPOXY SEAM SEALER
A full body, non sag, flexible two component epoxy seam
sealer. Match OEM seam sealers, use on metal, primed or any
finished surface. Work time 5-10 minutes. Paintable in 30-40
minutes.
Size
See applicator gun page 10.
SELF LEVELING SEAM SEALER
Ideal for seams, drip rails and trunks. Work time 5-10
minutes. Paintable in 30-40 minutes.
9
REPAIR MATERIALS & ADHESIVES
REPAIR MATERIALS
FLEXIBLE EPOXY FILLER
Stock / Code
Description
Size
RIGID EPOXY FILLER
XPST / 4008
Two Part Flexible Epoxy Repair Kit
440 g / 0.97 lb
Two Part Rigid Bumper repair material, easy sanding.
XPSAP / 4013
Two Part Semi-Rigid Epoxy Repair Kit
440 g / 0.97 lb
SEMI-RIGID EPOXY FILLER
XRF / 4006
Two Part Rigid Epoxy Repair Kit
440 g / 0.97 lb
Two Part Semi-Rigid Bumper repair material, easy sanding.
XE89 / 4019
Two Part Epoxy General Purpose Repair Kit
440 g / 0.97 lb
KEVLAR REINFORCED REPAIR
COMPOUND
Stock / Code
Description
For truck, snowmobile and all heavy duty plastic repairs. Kevlar
is a reinforced epoxy based, 2 part, simple to use, RIGID epoxy
with high structural strength, easy sanding, and 100% solids.
Suitable for all HEAVY DUTY repairs truck and general
transport vehicles, snowmobiles and fiberglass. Kevlar
features easy to use 1-1 mix, has excellent shelf life and is VOC
free. Color: YELLOW.
XRFHS-Q / 4099
XRFHS-Q / 4099
XRFHS-G / 4098
XRFHS-G / 4098
Kevlar Repair Compound Low VOC - Part A
Kevlar Repair Compound Low VOC - Part B
Kevlar Repair Compound Low VOC - Part A
Kevlar Repair Compound Low VOC - Part B
FIBER REINFORCING TAPE
Stock / Code
Description
XWT / 40900
Fiber Reinforced Tpe
Two Part Flexible Bumper repair material, easy sanding.
GENERAL PURPOSE EPOXY REPAIR
Two Part General Purpose repair material for rigid plastics,
easy sanding.
Fiber Tape used to reinforce your plastic repair. Adhesive
backing to make it stick to any plastic.
Size
1 L / 3.18 lb
1 L / 3.18 lb
4 L / 12.72 lb
4 L / 12.72 lb
LOW
VOC
Size
20 m / 65.62 ft
ADHESIVES
TWO PART URETHANE REPAIR
XSM6002 Two Part Universal Urethane Fast Adhesive for use
on all plastics. Use to bond, repair and fill bumper tabs, tears,
brackets and also bond emblems, body side moldings and
ground effects. 1-2 minutes working time.
XSM2002 Two Part Universal Urethane Bumper Repair –
Medium material offers exceptional strength for any plastic
repair, easy sanding. 5-10 minutes working time.
Stock / Code
Description
Size
XSM6002 / 60002
Two Part Universal Urethane
Adhesive – Fast
207 mL / 7 fl oz U.S.
XSM2002 / 2002
Two Part Universal Urethane
Bumper Repair – Medium
207 mL / 7 fl oz U.S.
STATIC MIXERS
Stock / Code
Description
Qty
Mixers for two component seam sealer, adhesives and repair
materials.
XSM200U6 / 440186
Static Mixers
6 to a bag
XSM200U50 / 440217
Static Mixers
50 to a bag
10
EQUIPMENT
SCHUTZ GUNS
ECONOMY SCHUTZ GUN
EXCELLENT SCHUTZ GUN
PREMIUM SCHUTZ GUN
For Bedliners, Undercoatings
Stock BUPA / Code 0003
For Shake & Shoot bedliner.
Stock BUPASS / Code 0005
Adjustable nozzle for obtaining different textures,
can be used to apply Bedliners and Gravel Guards.
Stock BUPAE / Code 0004
ECONOMY CAULKING GUN
DELUXE CAULKING GUN
HEAVY DUTY APPLICATOR GUN
All standard 300ml cartridges may be used.
Stock TCG1 / Code 00073
All standard 300ml cartridges may be used.
Stock TCG / Code 00072
Heavy-Duty Applicator Gun for use with 200 ml 1:1
& 2:1 cartridges.
Stock T221 / Code 221
& Gravel Guards.
APPLICATORS
SPRAY EQUIPMENT
PROFESSIONAL SERIES
SPRAY GUN
GRAVITY-FED MINI SPRAY GUN
Professional Series Spray Gun adopts low
volume middle pressure technology (LVMP).
The optimized pressure inner cap can bring
better economic value, painting with quicker
speed and over 65% transferring efficiency
saving 20-30% than traditional spray guns.
High performing and efficient, this slender
handled gun is ideal for blending, jams,
spot repair and much more. Available in
two tip sizes, 1.0 and 1.2 mm, this mini
gun will give you superior flexibility in the
tightest of spaces. Comes complete with a
cup, and cleaning brush.
Each gun is manually tested to ensure high
quality.
Available with 3 spray tips:
1.3 mm tip – Stock PS403 / Code 8403
1.4 mm tip – Stock PS404 / Code 8404
PS420 / 8420
Mini Paint Gun - 1.0 mm Tip
PS422 / 8422
Mini Paint Gun - 1.2 mm Tip
1.8 mm tip – Stock PS408 / Code 8408
11
ACCESSORIES
SPRAY GUN MAINTENANCE
22 PIECE SPRAY GUN MAINTENANCE KIT
Ideal for cleaning all types of spray guns such as:
suction, gravity feed, hvlp, spot, pressure,as well as
airbrushes.
Each Kit includes:
1 - long handled angle brush
1 - long handled straight fiber brush
1 - medium sized fiber brush
1 - medium sized wire brush
5 - fine fiber brushes
Stock / Code
Description
PS610/8610
Spray Gun Maintenance Kit
2 - hobby knife holders
6 - fine points
1 - plastic handled brush
3 - detail brushes
1 - bottle of cleaning solution
APPLICATORS
ANTI-CORROSION
SPRAY EQUIPMENT
Kit includes: 1 spray gun and 2 wands-Flexible & Rigid.
Washer and gasket kit included.
RUSTPROOFING APPLICATOR KIT
The gun atomizes the material by mixing air with the product
in the gun's spray head. The wand included with the system
has an angled metal venturi nozzle with a heavy duty flexible
rubber hose. It produces a conical spray pattern for general
purpose applications.
COMPLETE WAND KIT
Features all of our most popular wands to make your work
fast and easy. Includes a quick coupler for the spray gun to
allow rapid changes from one wand to another.
RUST PROOFING WANDS
12
Stock / Code
Description
ASSE / 0001
Anti-Corrosion Spray Equipment
Stock / Code
Description
ASS512EQ / 001735
Complete Rustproofing Kit 2.25GL
Stock / Code
Description
ASS512RPF / 001736 Rustproof Fogger Accessory Kit
Stock / Code
Description
TRPW / 1415
Rust Proofing Wand 32”
TUCW / 1425
Rust Proofing Wand 24”
ACCESSORIES
ACCESSORIES
FAST DRY GUIDE COAT
Guide Coat is a fast drying, easy to sand, different color
formula designed to highlight imperfections during surface
preparation. It helps to achieve a uniform sanded surface.
Black
RE-USABLE PAINT SUIT
Ideal for protecting clothes and bare skin from paint, chemicals
and dirty environments. A comfortable fit with a full range of
movement. Lightweight and durable. Breathable and cool. Full
zipper front and full pullover hood.
Stock / Code
Description
SGC / 24001
Guide Coat - Black
Size
340 g / 12 oz
Stock / Code
Description
Size
PSUITLG / 8901
Re-usable paint suit
PSUITM / 8902
Re-usable paint suit
MEDIUM
PSUITXL / 8900
Re-usable paint suit
EXTRA LARGE
PSUITXXL / 8903
Re-usable paint suit
XXL
LARGE
SPRAYABLE MASKING
SURE MASK SPRAYABLE MASKING
Ready-to-use, sprayable masking solution that provides
a clear, non-tacky film for protection of vehicles and
other surfaces from overspray, when applying
undercoatings, paint or primers. It entraps dust and dirt
to provide professional results, especially in areas such
as door jambs, wheel wells, engine compartments, grill
areas and other high dust spots. Easy to apply with a
Dominion Sure Seal “Schutz” type spray gun (Code
0003, Stock BUPA), or any conventional spray gun.
Sure Mask is solvent free and will dry without pin holes
while using less material.
LIQUID MASK
Sprayable. Easy to apply, easy to remove. Water-based
clear liquid mask protects against paint overspray. Effective
and economical masking solution. Dries to a firm coating
that will not adhere to skin and clothing. Excellent for booth
coating. Will dissolve easily when washed with cold water.
Use on body panels, door jambs, engine compartments,
wheel wells, grills, etc.
Stock / Code
Description
Size
BSM / 124000
Sure Mask Sprayable Masking
3.79 L / 1 gal U.S.
BSM20 / 124100
Sure Mask Sprayable Masking
18.9 L / 5 gal U.S.
BSM15 / 124150
Sure Mask Sprayable Masking
60 L / 15 gal U.S.
BSM205 / 124200
Sure Mask Sprayable Masking
205 L / 54.2 gal U.S.
Stock / Code
Description
BLM / 124400
Sprayable Liquid Mask
4 L / 1.05 gal U.S.
BLM20 / 124402
Sprayable Liquid Mask
18.9 L / 5 gal U.S.
BLM15 / 124404
Sprayable Liquid Mask
58 L / 15.3 gal U.S.
BLM205 / 124406
Sprayable Liquid Mask
205 L / 54.2 gal U.S.
Size
13
CLEANERS & THINNERS
CLEANING SOLVENTS
PREMIUM GUN WASH
Stock / Code
Description
UGW5 /10070
Premium Gun Wash
Stock / Code
Description
SSGC / 10065
Spray Gun Paint Remover
Stock / Code
Description
UFW1 / 10071
FINAL WASH - Mild Solvent Cleaner
3.78 L / 1 U.S. Gal
UFW5 / 10075
FINAL WASH - Mild Solvent Cleaner
18.9 L / 5 U.S. Gal
UFWQ / 10079
FINAL WASH - Mild Solvent Cleaner
946 mL / 32 fl oz U.S.
Stock / Code
Description
PS900 / 8450
Sure Sprayer Pump Bottle
Approximate Capacity: 1-1.3 L / 0.26 - 0.34 gal U.S.
PS900SK / 8451
Sure Sprayer Spare Parts Kit
Stock / Code
Description
A premium gun wash and solvent. Rapid acting.
SPRAY GUN PAINT REMOVER
Spray Gun Paint Remover will keep paint guns running
smoothly, saving time, labor and material.
Spray Gun Paint Remover is an easy to use economical
product for removing paint from spray guns after painting.
Pinpoint spray. Quickly dissolves paint.
MILD SOLVENT CLEANER
Final Wash is to be used as a mild solvent cleaner to remove
sanding dust and compound residue from primed or painted
metal surfaces. Cleans bare metal, existing finishes and
primed surfaces.
Not as strong as Sure Solv BSS, BSS1, BSS5.
CAUTION: This product is not recommended for use on plastic
or fibreglass, on freshly painted surfaces or over fresh
primers-sealers.
Size
18.9 L / 5 gal U.S.
Size
425 g / 15 oz
Size
SPRAYER BOTTLE
SURE SPRAYER PUMP BOTTLE
Use the Sure Sprayer for oxide removal, cleaning tire rims,
inside car cleaning, cleaning car bodies and glass cleaning.
Satisfies a demanding market where extreme performance is
the order of the day. Highly-resistant to corrosive products,
silicone, mineral oils (vegetable & animal), hydraulic and
synthetic fluids, acids and many organic solutions.
URETHANE REDUCER
LOW VOC URETHANE GRADE THINNER/REDUCER
Size
Low VOC Urethane Grade Thinner/Reducer is a universal
product designed to be used with virtually any brand of
UURF1LV / 6007
Fast Urethane Grade Thinner/Reducer
3.78 L / 1 U.S. Gal
urethane primer, basecoat or clearcoat that requires a urethane
grade reducer. The two reducer grades may be blended to suit
UURM1LV / 6009 Med Urethane Grade Thinner/Reducer
3.78 L / 1 U.S. Gal
various shop conditions.
UURF1LV - FAST - for 16 to 21 °C (60 to 70 °F)
UURM1LV - MEDIUM - for 21 to 27 °C (70 to 80 °F)
Low VOC content (<25% w/w) permits the applicator to use more reducer to achieve target coating viscosity and still maintain a VOC compliant coating
system, as applied. Urethane grade quality – contains no alcohols and is 99.9% water free.
14
LOW
VOC
RUST PAINT & PRIMER
RUST CHECK RUST CONTROL
RUST CHECK RUST INHIBITOR
A multi-purpose rust inhibitor and residual lubricant that
penetrates the tightest seams, bonding to metal and
dispelling moisture - the number one cause of corrosion.
Ideal for use at home, the cottage, office or shop . . .
anywhere rust is a problem. Protects new & old Metals. Deep
Penetrating & Long Lasting.
RUST CHECK COAT & PROTECT
Coats & Protects NEW & OLD Metals. Wear resistant
corrosion protection. A heavy-duty protectant lubricant.
Forms a gel-like coating that resists moisture and abrasion.
Provides durable lubrication and protection against rusting
and seizing even under adverse outdoor weather conditions.
RUST CHECK RUST CONVERTER
Rust Converter quickly converts rusted surfaces from all
metals to a paintable primer. It is ideal for use on automobiles,
trucks, bicycles, tools, barbeques and all metal rust. This
formula leaves a protective coating that inhibits further rust
formation and prepares the surfaces for paint.
Stock / Code
Description
Size
DS1054/1054
Rust Check Inhibitor
Stock / Code
Description
DS10025/10025
Rust Check Coat & Protect
Stock / Code
Description
DS11006/11006
Rust Check Rust Converter
Stock / Code
Description
DS21423 / 21423
Rust Paint - Gloss White
340 g / 12 oz
DS21425 / 21425
Rust Paint - Gloss Black
340 g / 12 oz
DS21427 / 21427
Rust Paint - Fire Red
340 g / 12 oz
Stock / Code
Description
DS21012 / 21012
Farm & Implement - JD Green
340 g / 12 oz
DS21013 / 21013
Farm & Implement - Ford Blue
340 g / 12 oz
DS21014 / 21014
Farm & Implement - International Red
340 g / 12 oz
DS21015 / 21015
Farm & Implement - JD Yellow
340 g / 12 oz
DS21016 / 21016
Farm & Implement - Old Cat Yellow
340 g / 12 oz
DS21017 / 21017
Farm & Implement - New Cat Yellow
340 g / 12 oz
Stock / Code
Description
DS10712 / 10712
Sandable Automotive Primer - Red oxide
284 g / 10 oz
DS10713 / 10713
Sandable Automotive Primer - Grey
284 g / 10 oz
350 g / 12.3 oz
Size
350 g / 12.3 oz
Size
283 g / 10 oz
RUST CHECK PAINTS
RUST CHECK RUST PAINT
Superior rust protection. Outstanding gloss retention.
Durable finish. Fast dry. For clean or rusted metal. No
primer required.
RUST CHECK FARM & IMPLEMENT
RUST CHECK
SANDABLE AUTOMOTIVE PRIMER
Fills light finishing scratches. Rust resistant. Fast drying.
Size
Size
Size
15
Manufacturers of
Automotive, Industrial &
Commercial Supplies
For More Than 40 Years
WORLDWIDE