1. No category

BMW S1000RR / S1000R Front Sprocket Cover Installation.
1.
2.
3.
4.
5.
6.
7.
Remove the four torx bolts securing the stock sprocket cover.
Remove the stock sprocket cover, make sure the anti-rattle pin and chain failure protector stays on.
Using the zip ties included in the kit, secure the sensor cable (keep them loose for now)
Install the Forsaken sprocket cover using 3 torx bolts of the stock sprocket cover.
Using the spacer from the stock sprocket cover (item #2) install 4th torx bolt as per drawing bellow
Secure the sensor cable tightly; making sure it is clear from the sprocket and chain.
Make sure all hardware is tight and secure before riding.
Forsaken Motorsports – [email protected]