1. No category

International Automotive Body Congress 2015
Am Buesing Palais, June 8-10, 2015
Global Automotive Management Council (GAMC) www.gamcinc.org
Berliner Strasse 111, 63065 Offenbach am Main, Germany
Special Events Monday, June 8, 2015
Registration 1:00pm – 3:00 pm
6:30 pm
Chairs Dinner – At Sheraton Offenbach Hotel Restaurant “PURE” and Terrace if Weather Permits
8:00 pm
Adjournment & Afterglow
Program Tuesday, June 9, 2015
To register and exhibit
call (734) 997-9249,
email to [email protected]
or
Fax (734) 786-2242.
SPONSORED BY
Registration 8:00am – 9:00 am
Plenary & Keynote – Energy, Environment & Sustainabilty
Room: - Isenburg 9:00 am to 12:45 pm
Session Chair: Lothar Teske
Manager
Opel
BIW Structural Optimization
Room: Isenburg - 1:45 pm to 5:15 pm
Session Co-Chairs: Boris Künkler, PhD, Manager, GME
Jens Standfuß, PhD, Deputy Head of Department, Joining &
Surface Technology, Fraunhofer IWS
9:00 am
Introduction & Opening Remarks
Lothar Teske
Manager Structure Development & Simulation
Opel
1:45 pm
9:15
The Evolution of the Materials in the Automotive
Head of FCA Group Materials Labs
Rosanna Serra, PhD
Fiat
2:15 pm
Development of Structural Components with Innovative
Materials and Technologies
Fabio D’Aiuto, PhD
CRF – GML
9:45 am
Material Strength and Lightweight Design
Sumanjit Singh, PhD
Audi Emeritus/Consultant
Baris Gökce, PhD
Professor
Afyon University
2:45 pm
Automotive Composite Structures – Potentials and Requirements
for the CAE Process Chain
Florian van de Loo, PhD
Opel
10:15 am
Break in Exhibit Hall in Exhibit Hall
3:15 pm
Break in Exhibit Hall
10:45 am
Benefits of Laser Welded Blanks in combination of Press Hardening
Philippe Baudon
Chief Executive Officer
AMTB Europe
3:45 pm
Adhesive Bonding Fatigue Durability Performance of High Strength Steel
Andreas Lutz, PhD, Dow Europe GmbH
Mansour Mirdamadi, Dow Automotive
11:15 am
The Year of Light 2015
Klaus Loeffler
Director
TRUMPF
4:15 pm
Crash Ductility and Numerical Modelling of Usibor 1500 and
Fracture Behavior
Dan Hasenpouth, PhD
ArcelorMittal Tailored Blanks
11:45 am
Enabling Sustainability as a Driver for Excellence in Automotive
Manufacturing
Kourosh Bahrami, PhD
Corporate Vice President
Henkel
4:45 pm
Tailor Solution – Material Mix for Light Weight Construction
Mario Padovani
Managing Director
WISCO
Session Adjourned & Lunch in PURE Restaurant
5:15 pm
Advanced Crash Management Structures by use of
Hot-Stamped Laser Welded Blanks
Francis Schmit, Sadok Gaied, Damien Abou-Khalil, Jean-Noel Gacel
ArcelorMittal
Marius-Ioan Rotarescu, PhD
AMTB
Session Adjourned
5:30 pm
Reception Begins in Exhibit Hall
6:30 pm
Adjourmment
12:15 pm
12:45 pm
Two Methods to Model Material in Hot Forming and Practical
Applications
Harald Porzner, David Lorenz
ESI Group
The Program Committee and Board of Directors reserves the right to amend this program without any notice.
www.gamcinc.org
www.jandngroup.com
www.jandngroup.com
International Automotive Body Congress 2015
Am Buesing Palais, June 8-10, 2015
Global Automotive Management Council (GAMC) www.gamcinc.org
Berliner Strasse 111, 63065 Offenbach am Main, Germany
Program Wednesday, June 10, 2015
Registration 8:00am – 8:30 am
Technology Enabling Design
Room: Isenburg – 9:00 am to 12:30 pm
Session Chair: Fabio D’Aiuto, PhD
Manager
Fiat Research Center
Advances in Assembly and Fab
Room: Isenburg - 1:30 pm to 4:30 pm
Session Chair:
Sullivan Smith, Principal Project Leader &Automotive
Program Manager
TWI
9:00 am
BlankLight - Aluminum Laser Welded Blanks; Design, Simulation and
Business Case
Jonathan Fisk
Shiloh Industries
1:30 pm
Sustainable, Surface Cleaning for Joining Preparation
in Lightweight Production
Edwin Buechter, PhD
Clean-Lasersysteme GmbH
Lightweight Design for automotive Applications - Joining of
Metal and Plastic
Marc Kirchhoff
TRUMPF
Break in Exhibit Hall
2:30 pm
11:00 am
Weight and Cost Saving by Rollforming Innovations
Heinrich Weber
Dreistern
11:30 am
Innovative Joining Technologies for Metallic Multi-Material Design
Jens Standfuß, PhD, Eckhard Beyer, PhD, Berndt Brenner, PhD,
Axel Jahn, PhD, Joerg Bellmann, Markus Wagner
Fraunhofer IWS
12:00 pm
Development of the Bus Frame by Flexible Roll Forming
Dongun Kim, PhD, MyungHwan Cha, Jae-Bok Nam, Yeon Sik Kang
POSCO
12:30 pm
Session Adjourned & Standing Lunch in Exhibit Hall
9:30 am
10:00 am
10:30 am
2:00 pm
Coil-fed Laser Blanking Technology
Manuel Hunger
Schuler
Joining Technology in the Automotive Industry - An Overview and
Critical Assessment
Sumanjit Singh, PhD
Consultant
ASF- Recent Developments in Friction Stir Welding
Sullivan Smith, Khalid Nor
TWI
3:00 pm
Break in Exhibit Hall
3:30 pm
Laser Blanking for Today’s Automotive Environment
Jay Finn
LaserCoil Technologies LLC
4:00 pm
Edge Tearing Test on Aluminum Sheets with DIC Measurement
Dajun Zhou, PhD, Changqing Du, PhD, Yongjun Zhou
FCA US
Guobiao Yang, PhD, Lianxiang Yang, PhD
Oakland University
4:30 pm
Session Adjourned
To register and exhibit
call (734) 997-9249
email to [email protected]
or
Fax (734) 786-2242
SPONSORED BY
www.gamcinc.org
www.jandngroup.com
Special Events Thursday, June 11, 2015
Plant Tours
9:30 am
Autostadt Visit – Meet in Lobby of Ritz Carlton You must make your own lodging and transportation arrangements
11:30 am Volkswagen Press Shop, Body Shop, Final Assembly, & Discussion on MQB – Meet in Lobby of Ritz Carlton - You must make your own lodging and
transportation arrangements
2:30 pm
Adjournment
The Program Committee and Board of Directors reserves the right to amend this program without any notice.
www.jandngroup.com
Registration Form
FEE SCHEDULE FOR REGISTRANTS
General Registration Fee is €1595 (Access to sessions for all days of the conference; also includes an access to
the IABC Library for abstracts, papers and presentations for a month, coffee Break in Exhibit Halls, lunch(es),
reception, and access to the exposition)
□ General Registration Fee is Euro 1595
□ Co-Author Registration Fee is Euro 995
□ Authors, Chairs, and Director of GAMC, Registration Fee is Euro 795
PLEASE PRINT OR TYPE
Full Name:
Organization:
Email:
Card Number:
Expiration Date:
CVC:
Amount:
Address:
ZIP:
The address you provide must be the billing address associated with the account
Please indicate by an “X” in the appropriate blank box (es).
I will attend the Reception and Dinner
June 8
I will attend the CONFERENCE and EXHIBITS on:
I will attend Tech Tour
June 11
□
June 9
□
June 10
□
□
PAYMENT METHODS: (All checks must be drawn from U.S. banks in U.S. funds equivalent to Euro currency)
Make Check Payable to: GAMC (Global Automotive Management Council) in the amount of, US$ ____________
Signature: X_________________________________________________ Date: _________________________
Mail or Fax Registration Form to: IABC, 5340 Plymouth Road, Suite 205, Ann Arbor, MI 48105, USA. FAX: (734)
786-2242 EMAIL: [email protected] REFUND POLICY: No Refunds
Online Registration Available at http://gamcinc.com/gamc_new/conferences/body-congress/registration/
A PayPal Account is required for all international transactions. If a PayPal account is not already in place you will
be required to create one.
How did you hear about us? ________________________________________________________________
International Automotive Body Congress
EMAIL: [email protected]
| 5340 Plymouth Rd, Suite 205., Ann Arbor, MI 48105, USA.FAX: (734) 786 2242 PHONE: (734) 997-9249