1. art and entertainment
2. music
3. musical instruments
4. drums

Roland Hybrid Drum Catalog 2014
Bring hybrid versatility
to your drum kit
Roland, V-Drums, V-Hi-Hat, and V-Cymbals,are either registered trademarks or trademarks of Roland Corporation in the United States and/or other countries.
All specifications and appearances are subject to change without notice.
Company names and product names appearing in this document are registered trademarks or trademarks of their respective owners.
The photographs on the front cover and pages inside were taken at Shinjuku BLAZE (Tokyo, Japan).
It is forbidden by law to make an audio recording, video recording, copy or revision of a third party’s copyrighted work (musical work, video work, broadcast,
live performance, or other work), whether in whole or in part, and distribute, sell, lease, perform, or broadcast it without the permission of the copyright owner.
Do not use this product for purposes that could infringe on a copyright held by a third party.
We assume no responsibility whatsoever with regard to any infringements of third-party copyrights arising through your use of this product.
Visit us online at www.roland.com/V-Drums/
www.Roland.com
Printed in Japan December, 13 RAM-4855 AD-3 JB-KB-SS
Imagine your perfect drum sound.
And then play it.
Acoustic drums + Roland electronics.
Your sound, no limits.
Roland Hybrid Drums
Three Advantages
1. Customize your sound
Enhance your sounds
You can enhance your sound by
triggering an electronic sound and
mixing it with your acoustic sounds
Hybrid drums: take the raw power of acoustic drums, add the potential of
electronics and start playing a drum kit that gives you the best of both worlds.
for greater dynamic range,
increased clarity and performance.
Even the fastest double-bass drum
rolls sound clear and pronounced.
Layer your sounds
You can add extra electronic
sounds, such as tambourine,
hand claps or even your
own sounds, which play along
with your acoustic drum sound.
Expand your kit
Expand the sounds available within
your kit. Play instruments that you
can’t take to the gig (such as
gongs) or that you don't have in
your original drum kit (such as
second snares or sub-drops).
2. Easy to use
It’s easy to create and set up a hybrid drum kit, even if you
have never used one previously. With Roland Hybrid, you
don’t have to change the look of your kit or adjust your
setup. The TM-2 sound module with acoustic triggers and
SOUND MODULE
DRUM TRIGGER
PAD
pads can be positioned easily on your kit and are simple to
set up and use.
OUTPUT
3. Amazing performance
This is at the heart of
Acoustic drum triggers
Pads can be positioned
a hybrid kit, integrating
attach to the rim of an
within your drum kit to
electronic sounds/audio
acoustic drum and send
play electronic sounds/
files into your drum kit.
a signal to your sound
audio. From mesh-head
Connecting your drum
module every time
second snares to
trigger/pad sends
you hit the drum. This
bar-triggers, adding pads
signals to this module
gives you the acoustic
offers flexibility for your
which then triggers your
and electronic sound
setup and your sound.
chosen sounds.
simultaneously.
Roland Hybrid brings a new level of professional performance
to your drumming. Whether it’s just one sound effect you
need, an entire backing track, or switching musical styles
during the set, Roland Hybrid allows you to adapt your
sound, track by track. The audience will be impressed.
Acoustic drums + Roland electronics.
Your sound, no limits.
Roland Hybrid Drums
Three Advantages
1. Customize your sound
Enhance your sounds
You can enhance your sound by
triggering an electronic sound and
mixing it with your acoustic sounds
Hybrid drums: take the raw power of acoustic drums, add the potential of
electronics and start playing a drum kit that gives you the best of both worlds.
for greater dynamic range,
increased clarity and performance.
Even the fastest double-bass drum
rolls sound clear and pronounced.
Layer your sounds
You can add extra electronic
sounds, such as tambourine,
hand claps or even your
own sounds, which play along
with your acoustic drum sound.
Expand your kit
Expand the sounds available within
your kit. Play instruments that you
can’t take to the gig (such as
gongs) or that you don't have in
your original drum kit (such as
second snares or sub-drops).
2. Easy to use
It’s easy to create and set up a hybrid drum kit, even if you
have never used one previously. With Roland Hybrid, you
don’t have to change the look of your kit or adjust your
setup. The TM-2 sound module with acoustic triggers and
SOUND MODULE
DRUM TRIGGER
PAD
pads can be positioned easily on your kit and are simple to
set up and use.
OUTPUT
3. Amazing performance
This is at the heart of
Acoustic drum triggers
Pads can be positioned
a hybrid kit, integrating
attach to the rim of an
within your drum kit to
electronic sounds/audio
acoustic drum and send
play electronic sounds/
files into your drum kit.
a signal to your sound
audio. From mesh-head
Connecting your drum
module every time
second snares to
trigger/pad sends
you hit the drum. This
bar-triggers, adding pads
signals to this module
gives you the acoustic
offers flexibility for your
which then triggers your
and electronic sound
setup and your sound.
chosen sounds.
simultaneously.
Roland Hybrid brings a new level of professional performance
to your drumming. Whether it’s just one sound effect you
need, an entire backing track, or switching musical styles
during the set, Roland Hybrid allows you to adapt your
sound, track by track. The audience will be impressed.
There are no restrictions to Roland Hybrid drums.
You can combine different sound modules, triggers and pads to suit your sound. Here are a few examples.
Basic hybrid kit
Standard Kit
RT-10S
Model used:
TM-2
TM-2/RT-10K /RT-10S
This is a simple kit with acoustic drum triggers connected to the
TM-2 sound module. This setup is perfect for a variety of musical
genres, including rock and pop. It allows you to enhance or layer
your kick and snare drum sound. This is the setup for those gigs
when you can't always add microphones to your kit, or at least mic
the kick and snare drums.
More creativity from a simple kit
BT-1
Modern Jazz Kit
Model used:
RT-10S
TM-2 / RT-10S/ BT-1
This kit features a trigger on the snare drum and BT-1 on the tom
holder arm. With this setup you can enhance your rim shots, layer
characteristic snare sounds, and add percussion sounds to expand
the number of instruments and sounds available in a simple kit.
TM-2
RT-10K
Acoustic Drums: SONOR ProLite Series (Color: Blue Sparkle)
Acoustic Drums: dw Collector's Standard Maple Series (Color: Twisted White Satin)
Give your kick drums heavier attack
Metal Kit
TM-2
Model used:
TM-2 / 2 × RT-10K
This kit has an RT-10K acoustic drum trigger attached to each kick
drum. This is ideal when playing fast double-bass drum patterns,
especially in metal music. This setup allows you to deliver heavy
and powerful kick drum sounds by enhancing your acoustic sound
with more attack from the electronic sound. No more muddy kick
sound in the mix!
If you own a V-Drums kit
“From Room to Stage”Kit
Model used:
TD-15
BT-1
TD-15 / RT-10K /BT-1
If you already have a Roland V-Drums kit, you can use the sound
module and pads to design your own hybrid setup. You can
practice at home on your V-Drums kit and take the components
you need out on the road as part of a hybrid kit. You can expand
your hybrid setup by adding triggers and BT-1 pads and
connecting to your V-Drums module.
RT-10K
RT-10K
RT-10K
Acoustic Drums: Premier XPK Series (Color: Translucent Ruby Lacquer)
Acoustic Drums: TAMA Starclassic Bubinga (Color: Ultraviolet Sparkle)
BT-1
TM-2
Hundreds of sounds in one hybrid drum kit
Percussion Kit
Model used:
TM-2 / 2 × BT-1
This kit features BT-1, a compact bar trigger pad attached to the
snare and tom. When connected to the TM-2 sound module, the
BT-1 can play percussion sounds such as tambourine, cowbell and
wood blocks or can even play/stop audio tracks on the SD memory
card. Depending on your configuration, you can connect up to four
BT-1 pads to your TM-2.
The ultimate hybrid setup
Advanced Kit
Model used:
TD-30/SPD-30/SPD-SX
RT-10 series/KT-10/KD-7
5 × BT-1 / PD-128S / CY-14C
By incorporating the TD-30 V-Drums sound module in your kit, you
gain connectivity to a large number of RT-10 series triggers and
pads, such as a V-Pad for the second snare, a second kick sound
with a KT-10 pedal and many BT-1 pads. The OCTAPAD SPD-30
provides additional percussion sounds and a phrase loop function
for further sound expression.
CY-14C
BT-1
SPD-SX
SPD-30
TD-30
KD-7
Acoustic Drums: TAMA Sliverstar (Color: Dark Mocha Fade)
PD-128S
RT-10S
RT-10K
KT-10
Acoustic Drums: dw Performance Series (Color: Candy Apple Red)
There are no restrictions to Roland Hybrid drums.
You can combine different sound modules, triggers and pads to suit your sound. Here are a few examples.
Basic hybrid kit
Standard Kit
RT-10S
Model used:
TM-2
TM-2/RT-10K /RT-10S
This is a simple kit with acoustic drum triggers connected to the
TM-2 sound module. This setup is perfect for a variety of musical
genres, including rock and pop. It allows you to enhance or layer
your kick and snare drum sound. This is the setup for those gigs
when you can't always add microphones to your kit, or at least mic
the kick and snare drums.
More creativity from a simple kit
BT-1
Modern Jazz Kit
Model used:
RT-10S
TM-2 / RT-10S/ BT-1
This kit features a trigger on the snare drum and BT-1 on the tom
holder arm. With this setup you can enhance your rim shots, layer
characteristic snare sounds, and add percussion sounds to expand
the number of instruments and sounds available in a simple kit.
TM-2
RT-10K
Acoustic Drums: SONOR ProLite Series (Color: Blue Sparkle)
Acoustic Drums: dw Collector's Standard Maple Series (Color: Twisted White Satin)
Give your kick drums heavier attack
Metal Kit
TM-2
Model used:
TM-2 / 2 × RT-10K
This kit has an RT-10K acoustic drum trigger attached to each kick
drum. This is ideal when playing fast double-bass drum patterns,
especially in metal music. This setup allows you to deliver heavy
and powerful kick drum sounds by enhancing your acoustic sound
with more attack from the electronic sound. No more muddy kick
sound in the mix!
If you own a V-Drums kit
“From Room to Stage”Kit
Model used:
TD-15
BT-1
TD-15 / RT-10K /BT-1
If you already have a Roland V-Drums kit, you can use the sound
module and pads to design your own hybrid setup. You can
practice at home on your V-Drums kit and take the components
you need out on the road as part of a hybrid kit. You can expand
your hybrid setup by adding triggers and BT-1 pads and
connecting to your V-Drums module.
RT-10K
RT-10K
RT-10K
Acoustic Drums: Premier XPK Series (Color: Translucent Ruby Lacquer)
Acoustic Drums: TAMA Starclassic Bubinga (Color: Ultraviolet Sparkle)
BT-1
TM-2
Hundreds of sounds in one hybrid drum kit
Percussion Kit
Model used:
TM-2 / 2 × BT-1
This kit features BT-1, a compact bar trigger pad attached to the
snare and tom. When connected to the TM-2 sound module, the
BT-1 can play percussion sounds such as tambourine, cowbell and
wood blocks or can even play/stop audio tracks on the SD memory
card. Depending on your configuration, you can connect up to four
BT-1 pads to your TM-2.
The ultimate hybrid setup
Advanced Kit
Model used:
TD-30/SPD-30/SPD-SX
RT-10 series/KT-10/KD-7
5 × BT-1 / PD-128S / CY-14C
By incorporating the TD-30 V-Drums sound module in your kit, you
gain connectivity to a large number of RT-10 series triggers and
pads, such as a V-Pad for the second snare, a second kick sound
with a KT-10 pedal and many BT-1 pads. The OCTAPAD SPD-30
provides additional percussion sounds and a phrase loop function
for further sound expression.
CY-14C
BT-1
SPD-SX
SPD-30
TD-30
KD-7
Acoustic Drums: TAMA Sliverstar (Color: Dark Mocha Fade)
PD-128S
RT-10S
RT-10K
KT-10
Acoustic Drums: dw Performance Series (Color: Candy Apple Red)
Products for creating your own hybrid kit.
Combine sound modules, triggers, and pads in any way you like to make your own drum sound.
Sound Module
For more details
www.roland.com/V-Drums/
Drum Trigger
TM-2 Trigger Module
The sound module for drummers building a hybrid kit for the first time
Acoustic Drum Trigger
High-precision triggers for enhancing and layering sounds
The button layout of the TM-2 is purposely simple and functional to make it easy to use, even for
RT-10K Kick Trigger
These acoustic drum triggers attach to the drum hoop and send a signal to the sound module in response
drummers that have never incorporated electronic instruments into their playing before.
to vibration-every time you play the drum head, a sound will trigger from the module. You can enhance
your kick sounds or add sounds to your snare and tom hits by mixing the acoustic sound with digital
The LCD screen provides excellent visibility, even in live situations. There’s no need for power cables and
sockets-the TM-2 operates on 4 x AA Batteries (sold separately). It comes with over 100 carefully
selected, ready-to-play professional sounds that were designed specifically for hybrid kits, including
RT-10S
sounds from the module to create innovative hybrid sounds. These triggers are robust, attach securely,
Snare Trigger
are easy to set up and can be adjusted to fit each drum. The RT-10S snare trigger is a dual trigger that
provides separate triggering for hits on your snare head and rim shots.
tones for enhancing drum sounds, percussion sounds to expand the range of instruments available in
your drum kit and even sound effects. The dual-trigger inputs allow you to assign individual sounds to
the head and rim of each pad or trigger, giving 4 different sounds from just two pads or triggers.
RT-10T
■ Trigger output: RT-10K=1, RT-10S=2 (Head, Rim), RT-10T=1
■ Guide for installation: [Rim height] RT-10K=30 to 36 mm (1-3/16" to 1-7/16"), RT-10S/RT-10T=11 to 15 mm (7/16" to 5/8"),
[Rim thickness (max)] RT-10K=13 mm (9/16")
Tom Trigger
■ Use your own, original sounds
You can also play original sounds stored on your SD card (WAV format) in
Pad
addition to the module's built-in sounds. Whether you’re triggering single-shot
percussion sounds, or triggering full backing tracks and songs the TM-2 allows
SD card slot
vast expansion of your sound range and possibilities.
BT-1 Bar Trigger Pad
A versatile Bar Trigger Pad
that fits to acoustic drums
and V-Pads
■ MIDI connectivity to other devices
This TM-2 module features MIDI IN and MIDI OUT, giving you the ability to trigger
sounds from external modules such as computer software, synths and other
percussion modules. By connecting a single MIDI cable from the TM-2 to your
V-Drums module, you can also play your own sounds on your SD card from other
MIDI connector
modules such as TD-15 and TD-30. This means drummers can now play their
own sounds using V-Drums kit by adding the TM-2.
AC or Battery powered
APC-33 All Purpose Clamp
A multi-clamp to mount a TM-2 or sound module to a cymbal stand or other hardware.
■Trigger inputs: 2
■Dimensions: 135 (W) x 130 (D) x 59 (H) mm (5-3/8" x 5-1/8" x 2-3/8")
■Weight: 360 g, 13 oz (excluding batteries and AC adaptor)
OCTAPAD SPD-30
Digital Percussion
White
Hundreds of drum and percussion
sounds from around the world
SPD-SX
An advanced sampling pad to perform
your own sounds and audio
Sampling Pad
The OCTAPAD holds 670 sounds that
You can sample your own sounds and load in your audio
are perfectly matched to acoustic
tracks into the SPD-SX in a few simple steps, and play them
drums. These sounds have a wide
back your sounds by nine assignable pads. In addition to
dynamic range, from soft to hard hits.
playing back samples and backing tracks, the unit comes
The phrase loop function, lets you
with over 200 built-in sounds. You can also connect triggers
record, playback and loop your
and pads to play samples and sounds from your kit.
performance, making it great for solo
can also connect up to four external
triggers or pads, allowing you to add or
replace your toms and cymbals in your
setup with an OCTAPAD.
TD-30 Drum Sound Module
Ideal pad for second snare
Using a V-Pad as your second snare
opens the door to a wider range of sounds
The BT-1 is compact and yet is easy
and performance options. You can assign
to hit. It can be mounted in two
a broad range of sounds to a pad,
ways; you can attach to the tension
from piccolo snares to deeper snares,
rod of a snare, tom or V-Pad
percussion sounds and more. You can
allowing it to be positioned to suit
even assign different sounds to the head
your style, or can be mounted to
and rim. This V-Pad is fitted with a tension
rods and tom arms.
adjustable mesh head that gives you
■ Trigger output: 1
■ Acceptable rod diameters: 8.0 to 12.5 mm (3/8" to 1/2")
■ Trigger output: 2 (Head, Rim)
■ Pad size: 12"
Cymbal pads, perfect for your hybrid kit
PDX-100 V-Pad
the feel of hitting an acoustic snare drum.
■ Usable pipe size: 10.5 to 28.6 mm (7/16" to 1-1/8")
In addition to the eight built-in pads, you
■Trigger inputs: 4
■Dimensions: 541 (W) x 272 (D) x 88 (H) mm
(21-5/16" x 10-3/4" x 3-1/2")
■Weight: 3.8 kg, 8 lbs 7 oz (excluding AC adaptor)
V-Pad
The clamp allows versatile angle adjustment and flexible setup.
performances on the live stage.
Black
PD-128S-BC
■Trigger inputs: 2
■Dimensions: 364 (W) x 331 (D) x 94 (H) mm (14-3/8" x 13-1/16" x 3-3/4")
■Weight: 2.5 kg, 5 lbs 9 oz (excluding AC adaptor)
CY-5
Cymbal Pad
CY-14C
V-Cymbal
Crash
CY-8
This is a compact 10” mesh pad that
allows attachment to rod or pipe type tom
holders
Cymbal Pad
■Trigger output: 2 (Head, Rim)
■Acceptable rod diameters:9.0 to 13.0 mm
(3/8" to 9/16")
■Usable pipe size: 22.2 mm (7/8")
CY-15R
V-Cymbal
Ride
PD-8 Pad
This is an 8.5-inch pad with a rubber
playing surface that supports rim shots.
These pads feature multiple-zone playing surfaces for ultimate playability. They
are ideal for splash cymbals, second rides, crashes, effects and more. They also
allow cymbal sounds to be changed from track to track, giving you a wide range
PDS-10 Pad Stand
of authentic cymbals with just one additional cymbal pad.
Allows mounting of the SPD-30 and SPD-SX on an independent
stand, with height and angle adjustment.
■Trigger output: 2 (Head, Rim)
■Acceptable rod diameters: 8.0 to 11.5 mm
(3/8" to 1/2")
■Size: CY-5=10", CY-8=12", CY-14C=14", CY-15R=15"
■ Height range: 643 to 1,093 mm (25-3/8" to 43-1/16")
Roland flagship sound module
The TD-30 holds over 1,100 drum and percussion sounds
TD-15
Drum Sound Module
KT-10 Kick Trigger Pedal
Versatile module for
performance
within, that perform with incredible sensitivity and a
The TD-15 has over 500 high-quality
dynamic range never before possible with electronic drums.
and expressive sounds that it shares
Fifteen trigger input jacks enable you to create a hybrid kit
with TD-30. The TD-15 allows two
that incorporates a wide variety triggers and pads. Players
external triggers or pads to be
can edit each of the sounds to incredible levels of detail
connected. The internal FX engine
(including effects, EQ and compression), allowing you to
and sound editing possibilities make
create the right tone to suit the music or the venue.
it perfect for customizing your sound
and performing on the live stage.
■Trigger inputs: 15
■Dimensions: 330 (W) x 258 (D) x 106 (H) mm (13" x 10-3/16" x 4-3/16")
■Weight: 3.2 kg, 7 lbs 1 oz
■ Extra Trigger inputs: 2
■ Dimensions: 154 (W) x 89 (D) x 225 (H) mm (6-1/16" x 3-9/16" x 8-7/8")
■ Weight: 685 g, 1 lbs 9 oz (excluding AC adaptor)
A Kick Trigger Pedal offering realistic feel
The KT-10 is a new trigger pad that incorporates the pedal
KD-7
Kick Trigger Unit
board, beater and playing pad in one unit. The solid high-quality
pedal has spring tension adjustment and beater weight
adjustment allowing authentic technique with the convenience
of a low-profile all-in-one design. It’s even possible to place it
where space is limited. It’s never been easier to add a second
kick drum to your setup with the KT-10. Because it’s a trigger,
*Kick Pedal not included
it can play any sound you want it to and even control functions,
This is a kick trigger unit that you can combine with your
such as start/stop of a track. KT-10 comes with a Mix In to
favorite kick pedal. This unit, like KT-10, also comes with a
chain two units together for double bass setup.
Mix In to chain two units together, as well as a special beater.
■ Trigger output: 1
■ Dimensions: 166 (W) x 440 (D) x 150 (H) mm (6-9/16" x 17-3/8" x 5-15/16")
■ Weight: 3 kg, 6 lbs 10 oz
■ Trigger output: 1
■ Dimensions: 172 (W) x 112 (D) x 100 (H) mm (6-13/16" x 4-7/16" x 3-15/16")
■ Weight: 1.4 kg, 3 lbs 2 oz
Products for creating your own hybrid kit.
Combine sound modules, triggers, and pads in any way you like to make your own drum sound.
Sound Module
For more details
www.roland.com/V-Drums/
Drum Trigger
TM-2 Trigger Module
The sound module for drummers building a hybrid kit for the first time
Acoustic Drum Trigger
High-precision triggers for enhancing and layering sounds
The button layout of the TM-2 is purposely simple and functional to make it easy to use, even for
RT-10K Kick Trigger
These acoustic drum triggers attach to the drum hoop and send a signal to the sound module in response
drummers that have never incorporated electronic instruments into their playing before.
to vibration-every time you play the drum head, a sound will trigger from the module. You can enhance
your kick sounds or add sounds to your snare and tom hits by mixing the acoustic sound with digital
The LCD screen provides excellent visibility, even in live situations. There’s no need for power cables and
sockets-the TM-2 operates on 4 x AA Batteries (sold separately). It comes with over 100 carefully
selected, ready-to-play professional sounds that were designed specifically for hybrid kits, including
RT-10S
sounds from the module to create innovative hybrid sounds. These triggers are robust, attach securely,
Snare Trigger
are easy to set up and can be adjusted to fit each drum. The RT-10S snare trigger is a dual trigger that
provides separate triggering for hits on your snare head and rim shots.
tones for enhancing drum sounds, percussion sounds to expand the range of instruments available in
your drum kit and even sound effects. The dual-trigger inputs allow you to assign individual sounds to
the head and rim of each pad or trigger, giving 4 different sounds from just two pads or triggers.
RT-10T
■ Trigger output: RT-10K=1, RT-10S=2 (Head, Rim), RT-10T=1
■ Guide for installation: [Rim height] RT-10K=30 to 36 mm (1-3/16" to 1-7/16"), RT-10S/RT-10T=11 to 15 mm (7/16" to 5/8"),
[Rim thickness (max)] RT-10K=13 mm (9/16")
Tom Trigger
■ Use your own, original sounds
You can also play original sounds stored on your SD card (WAV format) in
Pad
addition to the module's built-in sounds. Whether you’re triggering single-shot
percussion sounds, or triggering full backing tracks and songs the TM-2 allows
SD card slot
vast expansion of your sound range and possibilities.
BT-1 Bar Trigger Pad
A versatile Bar Trigger Pad
that fits to acoustic drums
and V-Pads
■ MIDI connectivity to other devices
This TM-2 module features MIDI IN and MIDI OUT, giving you the ability to trigger
sounds from external modules such as computer software, synths and other
percussion modules. By connecting a single MIDI cable from the TM-2 to your
V-Drums module, you can also play your own sounds on your SD card from other
MIDI connector
modules such as TD-15 and TD-30. This means drummers can now play their
own sounds using V-Drums kit by adding the TM-2.
AC or Battery powered
APC-33 All Purpose Clamp
A multi-clamp to mount a TM-2 or sound module to a cymbal stand or other hardware.
■Trigger inputs: 2
■Dimensions: 135 (W) x 130 (D) x 59 (H) mm (5-3/8" x 5-1/8" x 2-3/8")
■Weight: 360 g, 13 oz (excluding batteries and AC adaptor)
OCTAPAD SPD-30
Digital Percussion
White
Hundreds of drum and percussion
sounds from around the world
SPD-SX
An advanced sampling pad to perform
your own sounds and audio
Sampling Pad
The OCTAPAD holds 670 sounds that
You can sample your own sounds and load in your audio
are perfectly matched to acoustic
tracks into the SPD-SX in a few simple steps, and play them
drums. These sounds have a wide
back your sounds by nine assignable pads. In addition to
dynamic range, from soft to hard hits.
playing back samples and backing tracks, the unit comes
The phrase loop function, lets you
with over 200 built-in sounds. You can also connect triggers
record, playback and loop your
and pads to play samples and sounds from your kit.
performance, making it great for solo
can also connect up to four external
triggers or pads, allowing you to add or
replace your toms and cymbals in your
setup with an OCTAPAD.
TD-30 Drum Sound Module
Ideal pad for second snare
Using a V-Pad as your second snare
opens the door to a wider range of sounds
The BT-1 is compact and yet is easy
and performance options. You can assign
to hit. It can be mounted in two
a broad range of sounds to a pad,
ways; you can attach to the tension
from piccolo snares to deeper snares,
rod of a snare, tom or V-Pad
percussion sounds and more. You can
allowing it to be positioned to suit
even assign different sounds to the head
your style, or can be mounted to
and rim. This V-Pad is fitted with a tension
rods and tom arms.
adjustable mesh head that gives you
■ Trigger output: 1
■ Acceptable rod diameters: 8.0 to 12.5 mm (3/8" to 1/2")
■ Trigger output: 2 (Head, Rim)
■ Pad size: 12"
Cymbal pads, perfect for your hybrid kit
PDX-100 V-Pad
the feel of hitting an acoustic snare drum.
■ Usable pipe size: 10.5 to 28.6 mm (7/16" to 1-1/8")
In addition to the eight built-in pads, you
■Trigger inputs: 4
■Dimensions: 541 (W) x 272 (D) x 88 (H) mm
(21-5/16" x 10-3/4" x 3-1/2")
■Weight: 3.8 kg, 8 lbs 7 oz (excluding AC adaptor)
V-Pad
The clamp allows versatile angle adjustment and flexible setup.
performances on the live stage.
Black
PD-128S-BC
■Trigger inputs: 2
■Dimensions: 364 (W) x 331 (D) x 94 (H) mm (14-3/8" x 13-1/16" x 3-3/4")
■Weight: 2.5 kg, 5 lbs 9 oz (excluding AC adaptor)
CY-5
Cymbal Pad
CY-14C
V-Cymbal
Crash
CY-8
This is a compact 10” mesh pad that
allows attachment to rod or pipe type tom
holders
Cymbal Pad
■Trigger output: 2 (Head, Rim)
■Acceptable rod diameters:9.0 to 13.0 mm
(3/8" to 9/16")
■Usable pipe size: 22.2 mm (7/8")
CY-15R
V-Cymbal
Ride
PD-8 Pad
This is an 8.5-inch pad with a rubber
playing surface that supports rim shots.
These pads feature multiple-zone playing surfaces for ultimate playability. They
are ideal for splash cymbals, second rides, crashes, effects and more. They also
allow cymbal sounds to be changed from track to track, giving you a wide range
PDS-10 Pad Stand
of authentic cymbals with just one additional cymbal pad.
Allows mounting of the SPD-30 and SPD-SX on an independent
stand, with height and angle adjustment.
■Trigger output: 2 (Head, Rim)
■Acceptable rod diameters: 8.0 to 11.5 mm
(3/8" to 1/2")
■Size: CY-5=10", CY-8=12", CY-14C=14", CY-15R=15"
■ Height range: 643 to 1,093 mm (25-3/8" to 43-1/16")
Roland flagship sound module
The TD-30 holds over 1,100 drum and percussion sounds
TD-15
Drum Sound Module
KT-10 Kick Trigger Pedal
Versatile module for
performance
within, that perform with incredible sensitivity and a
The TD-15 has over 500 high-quality
dynamic range never before possible with electronic drums.
and expressive sounds that it shares
Fifteen trigger input jacks enable you to create a hybrid kit
with TD-30. The TD-15 allows two
that incorporates a wide variety triggers and pads. Players
external triggers or pads to be
can edit each of the sounds to incredible levels of detail
connected. The internal FX engine
(including effects, EQ and compression), allowing you to
and sound editing possibilities make
create the right tone to suit the music or the venue.
it perfect for customizing your sound
and performing on the live stage.
■Trigger inputs: 15
■Dimensions: 330 (W) x 258 (D) x 106 (H) mm (13" x 10-3/16" x 4-3/16")
■Weight: 3.2 kg, 7 lbs 1 oz
■ Extra Trigger inputs: 2
■ Dimensions: 154 (W) x 89 (D) x 225 (H) mm (6-1/16" x 3-9/16" x 8-7/8")
■ Weight: 685 g, 1 lbs 9 oz (excluding AC adaptor)
A Kick Trigger Pedal offering realistic feel
The KT-10 is a new trigger pad that incorporates the pedal
KD-7
Kick Trigger Unit
board, beater and playing pad in one unit. The solid high-quality
pedal has spring tension adjustment and beater weight
adjustment allowing authentic technique with the convenience
of a low-profile all-in-one design. It’s even possible to place it
where space is limited. It’s never been easier to add a second
kick drum to your setup with the KT-10. Because it’s a trigger,
*Kick Pedal not included
it can play any sound you want it to and even control functions,
This is a kick trigger unit that you can combine with your
such as start/stop of a track. KT-10 comes with a Mix In to
favorite kick pedal. This unit, like KT-10, also comes with a
chain two units together for double bass setup.
Mix In to chain two units together, as well as a special beater.
■ Trigger output: 1
■ Dimensions: 166 (W) x 440 (D) x 150 (H) mm (6-9/16" x 17-3/8" x 5-15/16")
■ Weight: 3 kg, 6 lbs 10 oz
■ Trigger output: 1
■ Dimensions: 172 (W) x 112 (D) x 100 (H) mm (6-13/16" x 4-7/16" x 3-15/16")
■ Weight: 1.4 kg, 3 lbs 2 oz
Roland Hybrid Drum Catalog 2014
Bring hybrid versatility
to your drum kit
Roland, V-Drums, V-Hi-Hat, and V-Cymbals,are either registered trademarks or trademarks of Roland Corporation in the United States and/or other countries.
All specifications and appearances are subject to change without notice.
Company names and product names appearing in this document are registered trademarks or trademarks of their respective owners.
The photographs on the front cover and pages inside were taken at Shinjuku BLAZE (Tokyo, Japan).
It is forbidden by law to make an audio recording, video recording, copy or revision of a third party’s copyrighted work (musical work, video work, broadcast,
live performance, or other work), whether in whole or in part, and distribute, sell, lease, perform, or broadcast it without the permission of the copyright owner.
Do not use this product for purposes that could infringe on a copyright held by a third party.
We assume no responsibility whatsoever with regard to any infringements of third-party copyrights arising through your use of this product.
Visit us online at www.roland.com/V-Drums/
www.Roland.com
Printed in Japan December, 13 RAM-4855 AD-3 JB-KB-SS
Imagine your perfect drum sound.
And then play it.