ENGINEERING MEM30205 | MEM30305 TRADE SKILLS ASSESSMENT & GAP TRAINING PROGRAM Outsource Institute of Technology Your Training & Development Partner Engineering - Certificate III Mechanical/Fabrication Trade MEM30205 Mechanical MEM30305 Fabrication yy Fitter and Turner yy Boiler Maker yy Fluid Power Mechanic yy Foundry Tradesperson yy Maintenance Mechanic yy Pressure Welder yy Metal Machinist (First Class) yy Sheet Metal Worker (First Class) yy Tool Maker yy Welder (First Class) Experience counts, particularly when it’s formally recognised. If you are in the metal, fabrication, and/or manufacturing industries, and have learnt your skills on the job, but do not hold a formal qualification, you should take this opportunity to have your skills formally recognised! Outsource Institute of Technology is able to assist you in getting trade qualified through a new funding program called, Skills Assessment and Gap Training. Hurry as this program ends on the 30th June 2015. Here is a self-assessment checklist to see if you are eligible. You must: currently or have previously worked within the metal, fabrication, and/or manufacturing industries for a number of years permanently live in Queensland not hold a trade qualification or be an apprentice/trainee not be an employee of any government department, government agency, and local council be over the age of 18 years old and no longer at school Will I need to contribute to the cost of the program? Individuals undertaking this program must contribute to their costs via a ‘co-contribution fee’ of $100. For further information on the subsidised qualifications and skill sets that are available through Outsource Institute of Technology, contact one of our friendly representatives at www.outsourceinstitute.com.au or call on 1300 136 904. Further Information: 1300 136 904 [email protected] www.outsourceinstitute.com.au RTO Provider Code: 31560