BARRACUDA CUSTOM ACCESSORIES MIRROR EXTENDERS FOR VICTORY MOTORCYCLES TOOL NEEDED: • 17mm Wrench This set can be used to add height to any stock or aftermarket mirror. It can also be used to extend the stock Victory mirrors out to the left or right. TO ADD MIRROR HEIGHT: • Place bike on stable ground. • Use 17mm wrench to loosen bottom mirror fastener and remove mirror. • Install Mirror Extender into handlebar base and tighten down with 17mm wrench. (NOTE: DO NOT OVERTIGHTEN AND STRIP OUT THREADS) • Install mirror end into the Mirror Extender and tighten with the 17mm wrench. • Adjust mirror to desired viewing placement. TO MOVE MIRROR OUT SIDEWAYS: (Stock Mirrors Only) • Place bike on stable ground. • Use 17mm wrench to loosen mirror from the top of the mirror stem and remove mirror. • Install Mirror Extender into the mirror and tighten down with 17mm wrench. (NOTE: DO NOT OVERTIGHTEN AND STRIP OUT THREADS) • Install mirror onto mirror stem and tighten with the 17mm wrench. • Adjust mirror to desired viewing placement. Enjoy your New Barracuda Custom Accessories Mirror Extender Set! Barracuda Custom Accessories, Inc. is not responsible for any damage done during mirror removal or installation. LIMITED LIFETIME WARRANTY: Barracuda Custom Accessories, Inc. warrants to the original purchaser that all products are to be free of defects in workmanship and materials for the life of the vehicle. This warranty does not include installation or other services charged for replacement FIND MORE GREAT VICTORY ACCESSORIES AT WWW.BARRACUDACUSTOM.COM BARRACUDA CUSTOM ACCESSORIES MIRROR EXTENDERS FOR VICTORY MOTORCYCLES TOOL NEEDED: • 17mm Wrench This set can be used to add height to any stock or aftermarket mirror. It can also be used to extend the stock Victory mirrors out to the left or right. TO ADD MIRROR HEIGHT: • Place bike on stable ground. • Use 17mm wrench to loosen bottom mirror fastener and remove mirror. • Install Mirror Extender into handlebar base and tighten down with 17mm wrench. (NOTE: DO NOT OVERTIGHTEN AND STRIP OUT THREADS) • Install mirror end into the Mirror Extender and tighten with the 17mm wrench. • Adjust mirror to desired viewing placement. TO MOVE MIRROR OUT SIDEWAYS: (Stock Mirrors Only) • Place bike on stable ground. • Use 17mm wrench to loosen mirror from the top of the mirror stem and remove mirror. • Install Mirror Extender into the mirror and tighten down with 17mm wrench. (NOTE: DO NOT OVERTIGHTEN AND STRIP OUT THREADS) • Install mirror onto mirror stem and tighten with the 17mm wrench. • Adjust mirror to desired viewing placement. Enjoy your New Barracuda Custom Accessories Mirror Extender Set! Barracuda Custom Accessories, Inc. is not responsible for any damage done during mirror removal or installation. LIMITED LIFETIME WARRANTY: Barracuda Custom Accessories, Inc. warrants to the original purchaser that all products are to be free of defects in workmanship and materials for the life of the vehicle. This warranty does not include installation or other services charged for replacement FIND MORE GREAT VICTORY ACCESSORIES AT WWW.BARRACUDACUSTOM.COM