1. home and garden
2. home furnishings
3. lamps and lighting

Infinite
Applications
Solstice LED Modules
Universal LED Modules
Application Guide
May 2015
Global Tech LED
8901 Quality Rd
Bonita Springs, FL 34135
1.877.748.5533
www.globaltechled.com
Solstice Scalable LED Engines
1
Before
After
Before
After
Simply Universal
2
Solstice LED modules for Retrofit Kits & LED Fixtures.
success is attributed to quality products, sound business practices, and loyalty to our national and international
representative firms and distributors. Our company strives to always uphold our motto, “Simply Universal.”
Our Solstice LED engines are perfect for LED retrofit kits and for new fixtures used in commercial and
industrial lighting applications. Of the 500,000,000 HID bulbs in the USA alone, Solstice engines 5498 and M21,
can replace every one of them, while producing the highest quality light in any fixture.
With the introduction of Life Sync smart technology, our engines are now intelligent. Monitoring their
environment, Solstice engines run at optimum settings without damaging themselves, thus extending their
life expectancies. Life Sync also supplements lumen depreciation by slowly ramping lumen output to prevent
lumen depreciation for the first 70,000 hours of operation time.
Table of Contents
Intro to GTL ...........................................2
GTL Solstice Features............................. 3
Solstice LED Modules............................. 4
Application Overview............................ 5-6
Technical Specifications......................... 7
Color Temperatures............................... 8
Optics.................................................... 9-10
Life Sync................................................ 11
Luxeon T Chips...................................... 12
Power Modes........................................ 13
Cooling Management.............................14
Scalability.............................................. 15
Wireless Sensor Module and Program.... 16
Fixtures.................................................17-18
Retrofit Systems....................................19-20
Drivers................................................... 21
Warranty................................................ 22
Global Tech LED Customers
Solstice Scalable LED Engines
Global Tech LED is an LED manufacturing and retrofit design company based out of Bonita Springs, FL. Our
Global Tech LED Solstice
Features
Life Sync Smart Technology
Under Voltage Protection
•For power outage or brownout.
Lumen Depreciation Maintenance
•Software automatically adjusts current
and forward voltage to LED’s to guarantee
the integrity of the module and no light
degradation for 70,000Hrs.
Module Temperature Protection
•Continual self temperature awareness allows
our modules to check their temperature in
a hot environment and ramp the amperage
consumption down in small increments until
a safe operating temperature is obtained.
They will then continually attempt to ramp
amperage up until they reach an equilibrium.
DIP Switch Settings
4 DIP Switch settings on board
•Allows for adjustment of wattage to increase
or decrease wattage.
On Board Function Settings
5-6-1 Energy Saver Program (save)
•Operates at 100% output for the first 5 hours of
operation, dims to 50% for 6 late evening hours,
then ramps back up for the last hour of the
evening. This function saves 3 hours of operation
per night which results in the equivalent savings
of about 1,100 hours per year.
Dimm Sync
•Used when a motion sensor or dimming switch
are using a dimming driver to provide the 10V
power to the motion sensor or dimming switch
Dimm Source
•Used when a motion sensor or dimming
switch are using the LED module to provide
the 10V power to the motion sensor or
dimming switch.
LED Chips
Philips Lumiled Luxeon “T” Chips
•Deliver high efficacy with high flux density to
enable tight beam control in directional and
high lumen applications.
Thermal Management
Mag Lev Fan
•Zero friction, super quiet, magnetic levitation
fan cools unit to help regulate temperature
of the LED Modules to prolong the life of the
unit.
Kelvin Temperature Options
•5700K (Green)
•5000K (Brown)
•4100K (Yellow)
•4000K (Blue)
•3500K (Red)
•3000K (Purple)
•2700K (Orange)
Optic Options
8 different optical distribution
lensing options
•10º, 25º, 50º, 75º, 360, 360s, Type II, and Type
III optics available.
Operating Temperature
-45ºC to 85ºC
Warranty
- 10 year warranty on actively cooled
Solstice Modules
- 5 year warranty on Eco Boards
The Brightest and Most Intelligent
Lowering lighting cost by up to 70% and boasting such innovative features
as universal compatibility, Life Sync smart technology, adjustable power
modes, scalability, advanced optics, and color temperature options, our
Solstice LED engines are Simply Universal!
Universal Compatibility
Solstice retrofit options are compatible with virtually every HID fixture, and most other high lumen applications including
recessed and track lighting. Superior active cooling coupled with proprietary thermal management design, ensures
the module maintains efficiency in high temperatures, provides color consistency, and ensures low light degradation
throughout it’s life expectancy of over 100,000 hours. Solstice engines come in two sizes. The “Solstice” is a 42 LED chip
module ranging from 75W-135W, and the “Solstice Mini” is a 21 LED chip module ranging from 30W-60W. With a variety of
photometric options and unlimited possibilities these modules can be used to replace any HID bulb in any application.
Life Sync Smart Technology
With the introduction of Life Sync smart technology, our engines are now intelligent. Monitoring their environment,
Solstice engines run at optimum settings without damaging themselves, thus extending their life expectancies. Life Sync
also supplements lumen depreciation by slowly ramping up current to prevent lumen depreciation for the first 70,000
hours of operation time. Learn more on page 7.
Power Modes
Pre-set to user specified wattage from the factory, on board dip switches provide power adjustment capabilities for OEM
fixture manufacturers and lighting designers who wish to adjust power and brightness in the field. Additionally, on board
energy savings program 5-6-1 is provided, and when activated, dims the engines automatically during off peak hours
without using external controls. This system saves the equivalent of 1,100 hours of operating time per fixture, per year.
Learn more on page 13.
Scalability
Solstice modules have the benefit of being completely scalable by allowing multiple modules to be installed in one fixture,
if necessary. Both retrofit fixtures and brand new Solstice LED units are ordered and built to the requirements of each
application. Learn more on page 15.
Advanced Optics
Advanced optic lenses in our Solstice engines provide the ability to customize light distribution to the location. These
specialized lenses can deliver light where needed, reducing dark spots, wasted lumens, and unwanted light pollution. Learn
more on page 9.
Color Temperature Options
Offering 7 different color temperatures, there is a match for every application from church to roadway lighting.
More on Page 8.
Solstice Scalable LED Engines
Solstice LED Modules
4
Solstice Scalable LED Engines
5
Roadway Lighting
Street Area
The Global Tech LED Roadway retrofits and LED fixtures have a life expectancy of over
100,000 hours, offering more than 15 years of reliable service. These efficient LED
Roadway Luminaires yield up to a 70% reduction in system energy requirements when
compared to standard HID systems. These features significantly reduce maintenance
frequency and expense.
U.S. Department of Energy (DOE) research studies show that simply shifting the color
of lamps from the warmer yellow end of the color spectrum to the cooler blue end
of the color spectrum, allows the human eye to view objects more clearly and spaces
to appear brighter. By changing the spectrum to mimic daylight, lighting levels can be
reduced to save additional energy while still achieving the same visual acuity.
Conventional roadway practices use lamps with a Correlated Color Temperature
(CCT) of 2,700K. Our spectrally enhanced LED Cobra Luminaire nearly doubles that
with a CCT of 5,000K. The higher CCT, available in our LED modules, causes the
aforementioned shift in the color spectrum, translating to improved visual acuity and
nighttime visibility.
High Mast
Post Top
Beyond the brilliant new Solstice LED Highmast
fixture, Global Tech LED was the first to develop
high mast retrofit lighting systems, and is now
pioneering type 2 and 3 high mast systems as
well. These new and innovative modular LED
systems provide up to 25 years of operating
life and up to 70% energy savings when
compared to traditional high mast products.
With customizable optics, Global Tech LED
offers customer choices on light levels and
distribution. Trusted by the United States
Department of Transportation and various ports
around the world, Global Tech LED now invites
you to secure your LED investment with the
world’s only LED high mast retrofit.
Lights with screw top finials are common in decorative
lighting. Our Solstice LED modules can easily be mounted to
decorative street lights using our unique finial or Y bracket
attachments.
The option to mount our modules directly to prismatic glass
refractors is also available, allowing the existing fixture to use the
light distribution pattern already in place. Our LED Acorn fixtures
offer the same innovative features of all other Solstice LED
products in a new LED fixture.
Warehouse and Factory
6
The wide range of custom optics available for our
Solstice modules allows for control over distribution
of light down aisles and walkways. By optimizing light
distribution to the application, the Solstice
modules deliver more lumens where you need them
and less where you don’t.
Parking
Customer safety and reduction of glare are
paramount when designing lighting systems. The side
emitting optics for Solstice modules produce even
distribution, thus eliminating dark spots. Using optics,
rather than traditional luminaire design with reflectors,
eliminates glare and sky glow, and also reduces
backlight. Global Tech LED manufactures both new LED
fixtures and retofit kits for parking applications.
Sports Lighting
In addition to providing an
exceptional amount of lumens,
we are also able to eliminate dark
spots using photometric analysis
in conjunction with precise
customizable optics. Bright, evenly
distributed lighting is necessary to
create a perfectly illuminated field.
Garage
Beyond immediate energy savings, the Solstice unit,
when used in a garage, brings safety and peace of mind.
Uneven light distribution and shadows are eliminated
by taking advantage of our modules, optic lenses,
and higher color spectrum. Using any 0-10V lighting
control systems and sensors, garage systems can be the
smartest and most energy efficient on the market.
Solstice Scalable LED Engines
Global Tech LED offers an exciting line of LED Highbay
fixtures, traditional and modern. Global Tech
LED’s retrofits for high bay fixtures were designed
specifically to replace conventional HID bulbs in a
wide variety of industrial applications.
Solstice Scalable LED Engines
7
Technical Specifications
Product
Rated Life
Body Color CCT [K] CRI [Ra] [L70] [h]
Output
Setting
Drive
Current
[mA]
Rated
Lumens
[Lm]
Rated
Watts
[W]
HO
HI
MH
ML
100%
75%
50%
25%
900
700
525
350
700
600
500
400
13164
9447
8999
7814
5910
4594
3742
2679
135
95
85
75
60
50
40
30
Solstice Series Engines
GTSOL5498
White
5700
70
100,000
GTSOLM21
White
5700
70
100,000
GTSOL5498
GTSOLM21
8
Optimize the Color for the Application
M21
Name
Description
CRI
FLUX
Color Temperature
Sticker Color
GTSOLM21-RD
GTSOLM21-BL
GTSOLM21-BR
GTSOLM21-GR
GTSOLM21-YW
GTSOLM21-OR
GTSOLM21-PR
Mini 21 Philips LED
Mini 21 Philips LED
Mini 21 Philips LED
Mini 21 Philips LED
Mini 21 Philips LED
Mini 21 Philips LED
Mini 21 Philips LED
80
80
80
70
70
80
95
190
190
190
220
210
170
130
3500K
4000K
5000K
5700K
4100K
2700K
3000K
Red
Blue
Brown
Green
Yellow
Orange
Purple
5498
Name
Description
CRI
FLUX
Color Temperature
Sticker Color
GTSOL5498-RD
GTSOL5498-BL
GTSOL5498-BR
GTSOL5498-GR
GTSOL5498-YW
GTSOL5498-OR
GTSOL5498-PR
5498 Philips LED
5498 Philips LED
5498 Philips LED
5498 Philips LED
5498 Philips LED
5498 Philips LED
5498 Philips LED
80
80
80
70
70
80
95
190
190
190
220
210
170
130
3500K
4000K
5000K
5700K
4100K
2700K
3000K
Red
Blue
Brown
Green
Yellow
Orange
Purple
Solstice Scalable LED Engines
Color Temperature Options
Solstice Scalable LED Engines
9
Seamless Optics
Optimize the Module for the Application
Seven-up optics are designed to perfectly fit the Solstice engine’s
Philips, Lumiled, and Luxeon T LED clusters. Precise lens integration preserves
lumens and prevents vibration. Solstice engine optics provide a large
variety of distribution patterns to meet the needs of each unique application.
10°
25°
NL
(No Lens)
Type II
Type III
50°
75°
120°
Type V
360
360s
Type II Type III
25°
50°
75°
360
0°
Type V
NEMA 1
250
Optic Lens
0°
Type V
NEMA 2
0°
500
Optic Lens
0°
750
Optic Lens
0°
Type V
NEMA 4
Type V
NEMA 5
360
Side Emitter
Optic Lens
Type V
NEMA 6
360s
360S
Square Side Emitter
0°
Optic Lens
Type V
NEMA 6
Solstice Scalable LED Engines
10°
100
Optic Lens
10
Life Sync Technology
Optimize the Module for the Environment
System Information
Life Sync uses advanced programming and technology to
automatically make minuscule changes in the system
according to the environment. This real-time maintenance
ensures optimal performance and protects the life of
the system.
Optimal for all Environments
Protects Life of the System
Supplements Natural Lumen Depreciation for 70,000hrs
Maintains Cool Operating Temperature
Safety Circuits Keep the Module in the Safe Zone
Lumen Depreciation Chart
Life Sync VS Standard *
Life Sync
Standard
100% Lumen Output Percentage
Solstice Scalable LED Engines
11
80% -
00
-1
0k
-9
0k
-8
0k
-7
0k
-6
0k
-5
0k
-4
0k
-3
0k
-2
0k
-1
-0
70% -
k
*For Display Purposes Only
Hours
12
The Brightest Chip for the Smartest Engine
LUXEON® T Emitters by Lumiled
LUXEON® T emitters, designed by Lumiled, are
illumination grade LEDs designed to deliver high efficacy
with high flux density to enable tight beam control in
directional and high lumen applications. With freedom
from binning and with leading performance, LUXEON
T emitters allow system optimization by blending the
perfect combination of high efficacy and low system cost.
With tight Correlated Color Temperature control, LUXEON
T ensures consistency in system color point.
Solstice Scalable LED Engines
Luxeon T LED Chips
Solstice Scalable LED Engines
13
Power Mode Selection
Optimize the Module for the Application
Program DIP switch:
Program Selection - You can currently select 1 of 4
programs, as indicated by the dot allocation next to
the DIP Switch.
5498 Switches
Functions:
STD:
A default setting, unit is on at all times.
561 energy saver program (save):
When this option is selected it allows the customer to
operate outdoor lamps at 100% output for the first 5
hours of operation, dimming 50% for 6 late evening
hours, than ramping back up to 100% output for the
last hour of the evening. This useful program saves 3
hours of operation per night which results in savings
over 1,100 hours per year!
Dimming Programs:
Dimm Sink (default):
This selection is to be used when a motion sensor or
dimming switch are using a dimming driver to provide
the 10V power to the motion sensor or dimming switch.
*Module shown in HO setting
** The “1” ,“2”, and “On CTS” markings on the dip switch are for manufacturing
purposes and should not be used in reference to the settings. Please refer only
to the “dot diagrams” printed next to the switch as a reference to the positions
of the switches in different settings.
M21 Switches
Dimm Source (selectable):
This selection is to be used when a motion sensor or
dimming switch are using the LED module to provide the
10V power to the motion sensor or dimming switch.
Wattage Selection:
Wattage DIP switch:
Program Selection - You can currently select 1 of 4
wattage setting, as indicated by the dot allocation next
to the DIP Switch.
Both models feature 4 wattage selections:
5498- High Output, High, Med High, and Med Low
M21- 100%, 75%, 50% and 25%
*Module shown in 100% setting
** The “1” ,“2”, and “On CTS” markings on the dip switch are for
manufacturing purposes and should not be used in reference to the
settings. Please refer only to the “dot diagrams” printed next to the switch
as a reference to the positions of the switches in different settings.
Please Refer to page 4 for Technical Specifications of the Wattage Selections for both Modules
Optimize the Module for the Retrofit
System Information
Using a fan to force air through the heat sink provides an
optimal level of active cooling by transporting excess heat
away from the critical components on the circuit board.
This viable active cooling solution for high brightness LEDs
is inherently low in energy consumption, flexible enough
to fit into a small space, and has an expected life over
100,000hrs matching that of the Luxeon LEDs. This system
is used in retrofits to compensate for the lack of passive
heat transfer in older fixtures.
Before
After
Passive Cooling Solution
Optimize the Fixture for the Engine
Parking Lots and Street Fixtures
Global Tech LED’s passive cooling solution is an innovative fixture design incorporating a massive heat
sink open to the outside air, transferring heat away from the circuit board at a rate unparalleled by any
other passive cooling system on the market. Solstice LED roadway and area fixtures use advanced
technology to achieve a unique optical design that offers superior illumination and uniformity while
minimizing glare and wasteful spill light.
Solstice Scalable LED Engines
Active Cooling Thermal Solution
14
Solstice Scalable LED Engines
15
Scalability
Optimize the Modules for the Application
Raising the Power
Solstice engines have the benefit of being completely scalable. Both retrofit fixtures and brand
new Solstice LED units are ordered and built for the requirements of the application. This brilliant
scaling system gives complete flexibility to adapt to the specific lighting environment.
16
Compatible with all 0-10 V Dimming/Control Systems
Function
Function
Dip SwitchDip
Settings
Switch Settings
N CTS
ON CTS
ON CTS
1
2
TD
1
2
ON CTS
ON CTS
1
2
2 STD 1 2
SAVE
SAVE
ON CTS
ON CTS
ON CTS
1
1
2
2
DIMM
1 2 DIMM
Sink Source
Global Tech LED’s modules have the ability to work with a wide variety of
wireless lighting technologies. Our Solstices are compatible with any 0-10 V
dimming system available on the market.
DIMM DIMM
Sink Source
Dimming Controllers:
Most modern lighting dimming systems use a 0-10 V input system in order to control
the level of light. Some wireless control systems incorporate scheduling, which
dims the lighting to a certain percentage for certain periods of time. These systems
give you greater control of your energy efficiency by using less light during times of
decreased traffic.
Switch Controls:
In some cases, the user wants to be able to turn their lighting system off remotely,
without the need of having to log into a computer system.
Motion Sensors:
Motion sensors allow our modules to only use energy when certain areas are
occupied. This extends the life of the module, and increases security for the
monitored areas.
Compatible wireless systems include
(but not limited to) the following:
Solstice Scalable LED Engines
Wireless Capabilities
Solstice Scalable LED Engines
17
Fixtures
Optimize the Fixture for the Application
Unique Features of All Fixtures:
The Solstice Module enables any fixture to be 0-10 V dimming capable. Additionally,
all of our modules have an active cooling system in place as well as temperature
protection software. Solstice modules also utilize Life Sync smart technology, which
allows them to operate without any lumen depreciation for at least 70,000 hours.
Light optical distribution options are also available. For more information regarding
the features of the Solstice, please refer to page 3.
Acrylic High Bays
Our Acrylic high bays provide up-lighting
to accent ceilings and create a more
aesthetically pleasing environment.
Aluminum High Bays
Aluminum high bay fixtures do not
allow uplight, rather they concentrate
all of the light where it is needed.
Sports Lighters
Our sports lighters have the ability to scale from
one module to eight, with the introduction
of SportsSentry® sports lighter fixtures. This
scalability along with our photometric capabilities,
and optic options allow for perfect sports lighting.
18
Global Tech LED Post Top fixtures and
lighting are both aesthetically pleasing.
Great for walkways, roads, and park lighting,
these fixtures are available in two different
mounting options, refractor and finial.
Area Lights
Global Tech LED area lighting fixtures
provide perfect light distribution for a
variety of applications from roadways
to parking lots. Some of these fixtures
have the ability to be built with our ECO
board module, decreasing initial costs and
providing a quicker return on investment.
Wall Packs
This lighting not only improves visual acuity around
the building, it also creates a more aesthetically
pleasing environment. These fixtures also have
the ability to be built with our ECO board module,
decreasing intial costs and providing a quicker
return on investment.
Canopy & Garage Surface Mounts
Canopy and Garage Surface Mount fixtures are perfect
for parking garages and gas stations. These fixtures
utilize refractor lenses to spread the lighting outward.
Canopy and Surface mounts have the ability to be built
with our ECO board module, decreasing initial costs
and providing a quicker return on investment.
Solstice Scalable LED Engines
Post Tops
Solstice Scalable LED Engines
19
Retrofit Systems
Optimize the Module for the Fixture
The Yoke Retrofit Bracket
With only three pieces, the yoke
retrofit is the most universal
mounting solution available. The
threaded rod can be made to any
length, optimizing the bracket for
the fixture. The same bracket and
rod (without the base) is used for
finial applications or situations where
a threaded rod would be a better
mounting option. The U-bracket
alone can bolt into nearly any fixture.
The yoke retrofit system is our most
versitile retrofit mount.
The Plate Retrofit
Global Tech LED has predesigned plates to fit almost any fixture. However, if a fixture
you would like to retrofit doesn’t fit one of our existing designs, we’ll make one that
will. Simply send us a sample fixture or the fixture dimensions, and our engineers will
customize a plate for you. Custom logos and designs can be achieved with our plate
retrofit system.
20
Optimize the Module for the Fixture
The Universal Plates
The new Global Tech LED Universal Plates are an innovative solution which
solves the issue of designing a custom plate. With these new plate systems
a range of fixture sizes can be retrofit using the same universal plate kit.
This means they are stock-able and therefore there is no lead time. The
Universal Plate systems are made for high bays, flood lights, and post
tops. Each Universal Plate kit is available in various wattages, and module
configurations. All Universal Plates have fully adjustable arms.
The Threaded Rod
Not all fixtures can be retrofit with a plate or
yoke mount, such as acrylic high bays. For this
small percentage of fixtures we have designed
a Threaded Rod retrofit system. The rod is
mounted to the center of the fixture and can
angle the modules outwards for increased side
emitted light. Our customers are extremely
impressed with the quality of light that is
produced by the Threaded Rod retrofit.
The Post Top Systems
Using either the threaded rod
or the plate/refractor retrofit
systems the Solstice® LED
units can retrofit any post top
fixture. The Solstice® module
delivers a brilliant and clean
look to post top applications
without changing the fixture.
Solstice Scalable LED Engines
Retrofit Systems
Solstice Scalable LED Engines
21
Drivers
Optimize the Module for the Application
LEDs have evolved into a practical, flexible light source for a wide variety of illumination applications.
Common LED products available in the market today are configured in a series-parallel array – designed to be
powered by a suitable 24VDC driver – which allows flexibility to connect variable load levels.
•
•
•
•
•
•
•
•
•
Limited output voltage and current plus isolation for safe operation.
UL Outdoor Damp location rated - Fully potted for moisture resistance and thermal IP 66 benefits.
Compact size design facilitates new simplified retrofit application as well as low-profile fixture design.
Low temperature operation allows for use in any outdoor application Performance (-40°C).
Generous high temperature margin flexibility to facilitate fixture design capability (+85°C).
Tightly regulated output consistent light output across line and load levels (1% line, 5% load).
The Solstice unit can be used for solar applications without the need for external drivers or inverters due to regulating our current on the PCB Board.
A 5-year limited warranty*, solely on material, for new products and for end users, from the industry’s most trusted component maker.
Drivers for Solstice Modules are available for both 120-277V and 347-480V input voltages.
Brands:
Global Tech LED utilizes drivers from Hatch, Fulham,
Inventronics, and Meanwell. Utilizing multiple driver
brands allows us to customize the modules to not only
the application, but also the fixture and the unit’s
immediate environment.
22
Global Tech LED Warranty
Subject to the exclusions set forth below, Global Tech LED, LLC. (“Global Tech”) warrants its commercial Solstice light emitting diode (LED) engine, including the LED arrays, fan, and integral control devices (“Products(s)”), to be free from defect in materials and workmanship (the “General Warranty”) for a period of ten
(10) years from the date of shipment from Global Tech’s facilities or 50,000 operating hours, whichever is reached first.. The LED arrays in the Product(s) will be considered defective in material or workmanship only if a total of 10% or more of the individual light emitting diodes in the Product(s) fail to illuminate. The supplied driver is
warrantied for 5 years. Global Tech will assist the customer in replacement of this product with the original OEM manufacturer. Global Tech may choose to replace drivers with another OEM if necessary at its discretion.
LABOR COSTS ASSOCIATED WITH WARRANTABLE LED MODULE REPLACEMENT.
Global Tech LED may pay labor costs on a job with a 3% or greater failure rate due to a product defect, up to $25 (twenty five dollars) per unit at GTL’s discretion, associated with replacement of product deemed warrantable upon inspection of returned goods up to one year from date of purchase. Invoices for labor must be sent to
Global Tech LED along with RGA (return goods authorization), and product to be inspected for warranty claim. If product defect is considered warrantable upon GTL inspection, Global Tech LED will reimburse labor expenses up to $25 per LED engine. Projects asking for Labor cost reimbursements must first get approval from GTL and be issued an RGA that includes labor costs. GTL will not be responsible for equipment rental or other additional costs that may occur. *This program is subject to change at GTL’s discretion. This Statement of Limited Warranty (“Warranty”) applies only when the Product(s) are installed in applications in which ambient temperatures are within the range of specified operating temperatures and are operated within the electrical values shown on the LED driver Label. Global Tech will not be responsible under this Warranty for any failure of the Product(s) that results from external causes such as: acts of nature; physical damage; exposure to adverse or hazardous chemical or other substances; use of reactive cleaning agents and/or harsh chemicals to clean the Product(s); environmental conditions; vandalism; fire; power failure, improper power supply, power surges or dips, and/or excessive switching; induced vibration; animal or insect activity; fault or negligence of
purchaser, any end user of the Product(s) and/or any third party not engaged by Global Tech; improper or unauthorized use, installation, handling, storage, alteration, maintenance or service, including failure to abide by any product classifications or certifications, or failure to comply with any applicable standards, codes,
recommendations, product specification sheets, or instructions of Global Tech; use of the Product(s) with products, processes or materials supplied by any end user or third party; or any other occurrences beyond Global Tech’s reasonable control. Adequate records of operating history, maintenance, and/or testing must be kept by
the end user and provided to Global Tech upon request to substantiate that the Product(s) have failed to comply with the terms of this Warranty. Neither polycarbonate non acrylic material used in the Products is warranted against yellowing, as yellowing may naturally occur over time due to normal aging. The Product(s) are not warranted against costs that may be incurred in connection with changes or modifications to the Product(s) required to accommodate site conditions and/or faulty building construction or design. In addition, the Product(s) are not warranted against cost resulting from installation of a third party components, failures of third party supplied components, or failures of Global Tech supplied Product(s) caused by a third party supplied component. If Global Tech determines, at its sole
discretion, the Product(s) fail to comply with the terms of this Warranty, Global Tech, at its option, will repair or replace the Product(s) with the same or a functionally equivalent Product(s) or component part(s). This Warranty excludes labor and equipment required to remove and/or reinstall original or replacement parts. This Warranty extends only to the Product(s) as delivered to, and is for the sole and exclusive benefit of, the original end user of the Product(s) at the original location. This Warranty may not be transferred or assigned by the original end user. The repair or replacement of any Product(s) or component part within the Product(s) is the sole and exclusive remedy for failure of the Product(s) to comply with the terms of this Warranty and does not extend the Warranty period. Warranty claims regarding the Product(s) must be submitted in writing within (30) days of discovery of the defect or failure to an authorized Global Tech post­sales or customer service representative. Product(s) or component part(s) may be required to be returned for inspection and verification of non­conformance by Global Tech, but no Product(s) or component part(s) will be accepted for inspection, verification or return unless accompanied by a “return authorization number” which can be obtained only from an authorized Global Tech post­sales or customer service representative. Global Tech is not responsible for any costs and expenses incurred in connection with shipment of Product(s) to Global Tech, but Global Tech shall bear all cost and expense incurred in connection with shipment of replacement Product(s) to the customer.
THE FOREGOING WARRANTY TERMS ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, AND GLOBAL TECH EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, RELATING DIRECTLY OR INDIRECTLY TO THE PRODUCT(S), WHETHER ORAL, WRITTEN, OR ARISING BY COURSE OF DEALING OR USAGE OF TRADE, INCLUDING ,WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NO AGENT, DISTRIBUTOR OR OTHER SUPPLIER OF GLOBAL TECH PRODUCTS HAS THE AUTHORITY TO MODIFY OR AMEND THIS WARRANTY WITHOUT EXPRESS WRITTEN AUTHORIZATION FROM GLOBAL TECH.
The total liability of Global Tech on any and all claims of any kind, whether in contract, warranty, tort (including negligence), strict liability or otherwise, arising out of or in connection with, or resulting from, Global Tech’s performance or breach of this Warranty, or from Global Tech’s sale, delivery, resale, repair, or replacement of any Product(s) or the furnishing of any services, shall in no event exceed the purchase price allocable to the Product(s) that give rise to the claim, and any and all such liability shall terminate upon the expiration of the warranty period specified above.
IN NO EVENT SHALL GLOBAL TECH BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES, EVEN IF INFORMED OF THE
POSSIBILITY OF SUCH DAMAGES, WHETHER AS THE RESULT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, OR ANY OTHER THEORY,
INCLUDING WITHOUT LIMITATION LABOR OR EQUIPMENT REQUIRED TO REMOVE AND/OR REINSTALL ORIGINAL OR REPLACEMENT PARTS, LOSS OF TIME, PROFITS OR REVENUES, LACK OR LOSS OF PRODUCTIVITY, INTEREST CHARGES OR COST OF CAPITAL, COST OF SUBSTITUTE EQUIPMENT, SYSTEMS, SERVICES OR DOWNTIME COSTS, DAMAGE TO OR LOSS OF USE OF PROPERTY OR EQUIPMENT OR ANY INCONVENIENCE ARISING OUT OF ANY BREACH OF THE FOREGOING WARRANTY OR OBLIGATIONS UNDER SUCH WARRANTY.
Global Tech reserves the right to modify or discontinue this Warranty without notice provided that any such modification or discontinuance will only be effective with respect to any Product(s) purchased after such modification or discontinuance. For any questions regarding this warranty please contact Global Tech LED, LLc., 8901 Quality RD,
Bonita Springs FL 34135. 877.748.5533.
Solstice Scalable LED Engines
STATEMENT OF LIMITED WARRANTY
FOR GLOBAL TECH LED, LLC
2/25/14
May 2015
Global Tech LED
8901 Quality Rd
Bonita Springs, FL 34135
1.877.748.5533
www.globaltechled.com