1. technology and computing

Goliath Performance Monitor Prerequisites
v11.5
Are You Ready to Install?
Use our pre-installation checklist below to make sure all items are in place before beginning the
installation process. For further explanation, please read the official Goliath Performance Monitor
Requirements on page 4 or contact a support engineer at [email protected].






Virtual Server or Physical Machine with the proper settings
 Windows Server 2008 R2 – 2012 R2
 At least 8 vCPUs and 12GB RAM
.NET 3.5 SP1 installed on the Virtual Server or Physical Machine
Internet Explorer Enhanced Security disabled
TCP ports 80 & 82 opened inbound
Download the Goliath Performance Monitor software
Proper credentials for the environments you would like to add to inventory (vCenter, XenServer, ZDC,
DDC, etc)
Legal Notices
Goliath Performance Monitor Prerequisites v11.5
Copyright © 2015 Goliath Technologies Inc. All rights reserved. www.goliathtechnologies.com
Goliath Technologies believes the information in this publication is accurate as of its publication date. The
information is subject to change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS IS.” GOLIATH TECHNOLOGIES MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION,
AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
Use, copying, and distribution of any Goliath Technologies software described in this publication requires an
applicable software license.
Linux is a registered trademark of Linus Torvalds.
Windows is a registered trademark of Microsoft Corporation.
Java is a registered trademark of Oracle Corporation.
VMware, vCenter, and vSphere are either trademarks or registered trademarks of VMware Corporation.
Citrix, NetScaler, Xen, XenServer, XenApp, XenDesktop and XenCenter are either trademarks or registered
trademarks of Citrix Systems, Inc.
All other trademarks and copyrights referred to are the property of their respective owners.
2
Goliath Performance Monitor Prerequisites
Copyright © 2015 Goliath Technologies
Version 11.5 – May 2015
I.
Deployment Architecture
This diagram shows how Goliath Performance Monitor fits into the environment.
3
Goliath Performance Monitor Prerequisites
Copyright © 2015 Goliath Technologies
Version 11.5 – May 2015
II.
Goliath Performance Monitor Installation Prerequisites
Note:
On Windows Server 2012, .NET 3.5 SP1 needs to be installed from the Features Wizard as
.NET 4.5 is not backwards compatible. To view documents, please have a PDF reader available. GPM can
be accessed over the network or WAN to your local computer
Table 1 - Goliath Performance Monitor System Requirements
Goliath Performance Monitor
Server
Platform: Virtual Machine or Physical Server
OS: Windows Server 2008 R2 – 2012 R2 64bit
Network: Static IP Address
vCPU: Minimum of 8 vCPUs
Memory: Minimum of 12 GB Memory
Disk: 25 GB of Disk Space
Dependencies: .NET 3.5 SP1
Goliath Performance Monitor Server: TCP ports 80 & 82 both must be open
inbound; and port 80 must be enabled outbound for remote access to the console.
Systems with Agents Deployed: TCP port 82 must be open outbound
Note: These ports can be changed from the default as needed
Firewall
Embedded: Microsoft SQL 2008 R2 Express
Version: Microsoft SQL from 2008-2014, including SQL Express
*Microsoft SQL Express 2008 R2 database is the embedded database option included
with Goliath Performance Monitor
Note: Environments larger than 150 monitored devices require Microsoft SQL Server.
Customers Evaluating with XenApp & XenDesktop should use full Microsoft SQL.
Database
Platform: Virtual Machine or Physical Server
OS: Windows NT SP6a and Newer; Unix/Linux, and Mac
Performance Specs: 0.1% CPU, 1.5 MB size on Disk, ~24 MB RAM/~50 MB RAM on
XenApp
Agent
VMware
API Integration: Service account with admin rights
VMware ESX/ESXI Version: 4.0 to 6.0
Citrix XenServer
API Integration: Root account needed
XenServer Version: 5.5 and newer
XenApp / XenDesktop
4
Citrix Versions: XenApp 4.5 - 7.6 | XenDesktop 5.5 - 7.6
XenApp/XenDesktop 7.x: .Net 3.5 SP1 and Service Account with Citrix Admin Rights
for the Goliath Performance Monitor Agent required on the broker
XenApp: Powershell 2.0 needed. For XenApp 7.x .NET 3.5 needed on all Windows
2012 session hosts.
XenDesktop VDI: Powershell 2.0 needs to be installed. For XenDesktop 7.x .NET 3.5
needed on all Windows 8 – 10 Virtual Desktops.
Note: Full Microsoft SQL suggested for XenApp & XenDesktop deployments
Goliath Performance Monitor Prerequisites
Copyright © 2015 Goliath Technologies
Version 11.5 – May 2015
III.
Introduction to Goliath Performance Monitor 11.5
Goliath Performance Monitor from Goliath Technologies is ushering in a new paradigm in managing the
complexity in XenApp and XenDesktop environments. The solution has been architected based on the input
from customers, technology and service provider partners like Citrix as well as integrators. We have listened to
the difficulties they all have managing virtual desktop environments, specifically XenApp and XenDesktop, and
the limited management tools available to them.
Goliath Performance Monitor 11.5 delivers significant proactive monitoring and troubleshooting enhancements
for the users of Citrix XenApp and XenDesktop. The solution now gives greater clarity and understanding to IT
professionals tasked with delivering end-user experiences through XenApp and XenDesktop, by enabling new
drill down and correlation enhancements which link applications/user/server performance. XenApp and
XenDesktop which allows quickly pinpoints points of failure, enables quick troubleshooting and delivers
proactive remediation and alerting capabilities for the entire XenApp and XenDesktop environment – keeping
virtual application and desktop sessions running smoothly without interruption.
Goliath Performance Monitor Evaluation License
Goliath Performance Monitor’s Evaluation allows you to configure every aspect of the product without
limitation including hypervisor integration, agent deployments, XenApp & XenDesktop integration, building
custom dashboards, alerting, reporting, and more. The evaluation includes the following license allowances:
VMware/XenServer Hosts
Windows/Linux/XenApp/VDI Agents
Network Devices
10
100
5
If your evaluation and Proof of Concept process requires a different configuration than that which the licensing
indicated herein allows for, please contact your account manager, or Goliath Sales or Support as follows for
assistance with your query:
Sales:
eMail: [email protected]
Phone: 1-855-465-4284
Support:
eMail: [email protected]
Phone: 1-855-465-4284
5
Goliath Performance Monitor Prerequisites
Copyright © 2015 Goliath Technologies
Version 11.5 – May 2015
IV.
Environment Prerequisites Explained
Prior to installing Goliath Performance Monitor and configuring it for your environment, we suggest you gather
and have available the following infrastructure details, authentication credentials, and network traffic rules
prepared to facilitate implementation.
1. Infrastructure
o Have available IP Addresses and hostnames/FQDN to:
 vCenter(s)
 XenServer Pool Master(s)
 XenApp: Data Collector
 Network
 Network Device Management IP address
 SNMP community string
 Configure device to send SNMP & Syslog to Goliath Performance Monitor
o SMTP Server Address
o If configuring remote environment, WAN IP of site where Goliath Performance Monitor
will be deployed
2. Authentication
o Domain Administrator credentials for Windows Servers
o root credentials for any Linux/Unix systems
o VMWare vCenter user with Administrator rights
o XenServer Pool Master user with administrator rights or root user
3. Network Security
o If internal traffic exceptions/routing is necessary, Goliath Performance Monitor agents
maintain a TCP connection on port 82
o If administrators will be accessing Goliath Performance Monitor from their desktops then
an exception for TCP traffic on 80 is necessary
o For communication to Master Agents and agents deployed to remote environments
Goliath Performance Monitor will need a NAT policy for port 82 back to the Goliath
Performance Monitor server.
6
Goliath Performance Monitor Prerequisites
Copyright © 2015 Goliath Technologies
Version 11.5 – May 2015