Cold Weather Technologies Indirect Process Heater TECHNICAL SPECIFICATIONS SHEET for the 385 Indirect Process Heater Heat into process :: 140,800 - 308,000 BTU/Hour 41.2 - 90.2 kW/Hour Heat into burner :: 176,000 - 385,000 BTU/Hour 51.5 - 112.7 kW/Hour Number of burners :: 11 Weight :: 1,500 kg / 3,300 lbs Operating pressures :: -28 Hg / 15 psi Operating temperatures :: 60°C - 107°C Stack temperatures :: 120°C - 230°C Footprint :: Depends on coil and condenser configuration Power :: Millivolt supply from thermopiles in standing pilot Safeties and relief valves :: 15 psi PSV Insulation :: 2” Cladding :: Embossed aluminum Foundation :: Skid mounted Safety devices: Emergency ESD button Available coils :: 2”, 3”, 4”, 6” Fuel supply required :: 400scF/hr at 5 psi ENVIRONMENT :: l l l l l l Burner and firebox configurations result in reduced exhaust stack temperatures, High-efficiency, low-emission burner system reduces Greenhouse Gas emissions, Indirect fired, thereby eliminating firetube failures, Low-pressure, low-volume burner system, Operates virtually silent, and Requires significantly less glycol than conventional line heating systems. ECONOMICS :: l l l l l Improved thermal and combustion efficiencies minimizing fuel consumption, Multi-fuel capable for all domestic and industrial applications, System is designed to heat and isolate multi-tank or vessel applications, No moving parts, reducing maintenance and down time costs, and Can easily be retrofitted into existing firetube throats. SAFETY :: l l l l l Easily accessed millivolt fuel train and temperature controls, Evaporator installed at ground level, Flame failure control system, Indirect fired, and Push button battery operated pilot ignition. BENEFITS AND FEATURES The 385 unit is our mid-range heat solution - perfect for your typical smaller application.