2100 PUMP STROKE COUNTER SYSTEM DATA SHEET APPLICATION The HDI 2100 Pump Stroke Counter is an intrinsically safe, certified, solid-state electronic stroke counter primarily used for monitoring mud pumps. Found most commonly within the HDI 9000 Choke Console System, the HDI 2100 monitors and displays the total accumulated mud pump strokes and the stroke rate of up to 4 individual mud pumps simultaneously. The stroke rate for each mud pump can be individually selected for display and is updated every second. Once installed, there is virtually no maintenance or calibration required. The quartz crystal oscillator provides high precision counts with no drift. The stainless steel case is completely sealed and features stainless steel piezo switches for long life. The entire package is constructed to operate in harsh environments and high vibration conditions encountered in land and offshore drilling. All HDI Gauges provide safety, accuracy, reliability, and low maintenance for the user. FEATURES • Battery powered • Field repairable system • Low battery indicator OPTIONS • Externally powered, 12VDC or 24VDC required (non-certified option) • Backlight, 12VDC or 24VDC required (non-certified option) • Monitor 1, 2, 3, or 4 pumps simultaneously • Micro-switch or proximity sensor • Dual sensors available for HMI/PLC integration • Solid state display • Simple interface for calibration CERTIFICATIONS • CSA: Intrinsically Safe Class 1, Division 1, Groups A, B, C and D • ATEX: optional, II 1 G, Ex ia IIC T4 SAFETY PRECISION INNOVATION WELL CONTROL MONITORING AT ITS FINEST 2100 PUMP STROKE COUNTER SYSTEM DATA SHEET DIMENSIONS SPECIFICATIONS • Weight: 5 lbs (as shown gauge display only) All dimensions given are in inches and [millimeters] unless • Case Material: Stainless steel otherwise noted. • Stroke Rate Range: 15 - 300 spm • Total Accumulated Strokes Displayed: 65,535 strokes • Power: HDI E260 Battery Pack, 1 year life span • Media (Process) Temperature: -40 to 100 celsius • Display: Liquid crystal display of total strokes and selected pump spam • Time Base: Quartz crystal oscillator HDI • Viewing Angle: 45 degrees www.hdigauges.com • Viewing Distance: 30 feet POWER DISPLAY • Electronics Protection: Gasket seal CLEAR • Sensor Housing: Micro-switch or proximity sensor TTL STROKES SELECT LOW BATT PUMP 1 STROKES / MIN 2 3 4 PUMP SELECT HDI www.hdigauges.com POWER DISPLAY CLEAR TTL STROKES SELECT LOW BATT PUMP 1 STROKES / MIN 2 3 4 PUMP SELECT Specifications subject to change without notice. HDI Instruments, LLC is a registered ISO 9001:2008 company. Copyright 2015 HDI Instruments, LLC HDI Instruments, LLC, 4130 Directors Row, Houston, TX 77092 USA Phone: 713-688-8555 | Fax: 713-688-2228 | Contact Email: [email protected] | Website: www.hdigauges.com SAFETY PRECISION INNOVATION WELL CONTROL MONITORING AT ITS FINEST
© Copyright 2024