Diagnostics and Garage Equipment CTEK MXS 10 EC BATTERY SUPPORT UNIT (BSU) AND CHARGER Product specification Fully automatic battery support unit and 8 step ‘smart’ charger for 12v lead-acid batteries from 20 – 200Ah Equipped with 4m cables for maximum portability and convenience Diagnostic feature identifies whether a battery can hold a charge Enables sulphated, stratified and deeply-discharged batteries to be reconditioned 2 year warranty Flexible and highly capable, whatever the weather The CTEK MXS 10 EC is a fully-automatic 8 step ‘smart’ charger that delivers 10A to 12v batteries from 20-200Ah and up to 300Ah The MXS 10 EC is IP65 classified, making it splash and dust proof, and is designed to be non-sparking, reverse polarity protected and short-circuit proof too, eliminating risk to the user or the vehicle’s electronic systems. Suitable for all types of 12v batteries, including AGM and Gel, Test and recondition deeply discharged batteries the MXS 10 EC is ideal not only for cars but for a wide range Battery condition diagnosis is easy with the MXS 10 EC, which of other applications, including boats and caravans. 4m charging automatically tests the battery and indicates whether it is able cables and a durable protective silicon rubber bumper make it to accept and hold a charge or if it has reached the end of its life. ideally suited to professional workshop use. Automatic pulse charging treats sulphated batteries and extends An optional temperature sensor enables the MXS 10 EC to battery life, and a special reconditioning function allows deeply automatically compensate for the conditions to provide optimum discharged batteries to be returned to working order. in maintenance charging mode. charging whatever the weather. SAFE AND EASY TO USE Designed to be user-friendly, the CTEK MXS 10 EC battery charger features a multi-coloured LED display that enables the user to follow each step of the charging process. Brought to you in partnership with: CTEK MXS 10 EC Battery Support Unit (BSU) and Charger CTEK’s UNIQUE 8 STEP CHARGING process 1 STEP 1 DESULPHATION Pulsing voltage removes sulphates from the lead plates of the battery restoring the battery capacity. Tests if the battery can accept charge. Charging begins if the battery is OK. 3 STEP 3 BULK Charging with maximum current until approximately 80% battery capacity. 4 STEP 4 ABSORPTION, READY TO USE Charging with declining current to maximize up to 100% battery capacity. data, excellent vehicle coverage and outstanding practicality, all backed by comprehensive technical support, the mega macs range from Hella Gutmann Solutions offers the complete diagnostic solution for today‘s leading technicians. 5 STEP 5 ANALYSE With cutting-edge and future-proof technology, the very latest technical 2 STEP 2 SOFT START Also available from Hella Gutmann Solutions: mega macs diagnostic tools ests if the battery can hold charge. Batteries that cannot hold charge may T need to be replaced. 6 STEP 6 RECONDITION Reconditioning function for deeply discharged batteries. 7 STEP 7 FLOAT, FULLY CHARGED Maintaining the battery voltage at maximum level by providing a constant voltage charge. 8 STEP 8 PULSE, MAINTENANCE CHARGING Maintaining the battery at 95-100% capacity. The charger monitors the battery voltage and gives a pulse when necessary to keep the battery fully charged. For further information or technical support please contact our Technical CTEKMXS10EC TECHNICAL INFORMATION Charging Voltage 14.4/14.7/15.8/13.6v Charging Current Max 10A Type of Charger 8 step, fully automatic charging cycle Type of Battery 12v lead acid, gel and AGM batteries Battery Capacity 20 – 200Ah, up to 300Ah for maintenance Insulation IP65 (splash and dust proof) Brought to you in partnership with: Technical Support Helpline on 01295 662402 or visit: www.hella-gutmann.co.uk
© Copyright 2024