CTEK MXS 10 EC brochure - Hella Gutmann Solutions

Diagnostics and Garage Equipment
CTEK MXS 10 EC BATTERY SUPPORT
UNIT (BSU) AND CHARGER
Product specification
Fully automatic battery support unit and 8 step ‘smart’ charger
for 12v lead-acid batteries from 20 – 200Ah
Equipped with 4m cables for maximum portability and convenience
Diagnostic feature identifies whether a battery can hold a charge
Enables sulphated, stratified and deeply-discharged batteries to be reconditioned
2 year warranty
Flexible and highly capable, whatever
the weather
The CTEK MXS 10 EC is a fully-automatic 8 step ‘smart’ charger
that delivers 10A to 12v batteries from 20-200Ah and up to 300Ah
The MXS 10 EC is IP65 classified, making it splash and dust proof,
and is designed to be non-sparking, reverse polarity protected
and short-circuit proof too, eliminating risk to the user or the
vehicle’s electronic systems.
Suitable for all types of 12v batteries, including AGM and Gel,
Test and recondition deeply discharged
batteries
the MXS 10 EC is ideal not only for cars but for a wide range
Battery condition diagnosis is easy with the MXS 10 EC, which
of other applications, including boats and caravans. 4m charging
automatically tests the battery and indicates whether it is able
cables and a durable protective silicon rubber bumper make it
to accept and hold a charge or if it has reached the end of its life.
ideally suited to professional workshop use.
Automatic pulse charging treats sulphated batteries and extends
An optional temperature sensor enables the MXS 10 EC to
battery life, and a special reconditioning function allows deeply
automatically compensate for the conditions to provide optimum
discharged batteries to be returned to working order.
in maintenance charging mode.
charging whatever the weather.
SAFE AND EASY TO USE
Designed to be user-friendly, the CTEK MXS 10 EC battery charger
features a multi-coloured LED display that enables the user to
follow each step of the charging process.
Brought to you in partnership with:
CTEK MXS 10 EC Battery Support
Unit (BSU) and Charger
CTEK’s UNIQUE 8 STEP CHARGING process
1 STEP 1 DESULPHATION
Pulsing voltage removes sulphates from the lead plates of the battery
restoring the battery capacity.
Tests if the battery can accept charge. Charging begins if the battery is OK.
3 STEP 3 BULK
Charging with maximum current until approximately 80% battery capacity.
4 STEP 4 ABSORPTION, READY TO USE
Charging with declining current to maximize up to 100% battery capacity.
data, excellent vehicle coverage and
outstanding practicality, all backed
by comprehensive technical support,
the mega macs range from Hella
Gutmann Solutions offers the
complete diagnostic solution for
today‘s leading technicians.
5 STEP 5 ANALYSE
With cutting-edge and future-proof
technology, the very latest technical
2 STEP 2 SOFT START
Also available from
Hella Gutmann Solutions:
mega macs diagnostic tools
ests if the battery can hold charge. Batteries that cannot hold charge may
T
need to be replaced.
6 STEP 6 RECONDITION
Reconditioning function for deeply discharged batteries.
7 STEP 7 FLOAT, FULLY CHARGED
Maintaining the battery voltage at maximum level by providing a constant
voltage charge.
8 STEP 8 PULSE, MAINTENANCE CHARGING
Maintaining the battery at 95-100% capacity. The charger monitors the battery
voltage and gives a pulse when necessary to keep the battery fully charged.
For further information or technical
support please contact our Technical
CTEKMXS10EC
TECHNICAL INFORMATION
Charging Voltage 14.4/14.7/15.8/13.6v
Charging Current Max 10A
Type of Charger 8 step, fully automatic charging cycle
Type of Battery
12v lead acid, gel and AGM batteries
Battery Capacity
20 – 200Ah, up to 300Ah for maintenance
Insulation
IP65 (splash and dust proof)
Brought to you in partnership with:
Technical Support
Helpline on 01295 662402 or visit:
www.hella-gutmann.co.uk