1. technology and computing
2. hardware

INTRODUCTION
T Y R E
C H A N G E R S
Today’s tyre market presents many challenges,
including; run-flat systems, low profile tyres and
increasing diameter sizes. Our tyre changers are
famous worldwide for their outstanding quality and
are designed to handle the demands of the busiest
tyre workshops in the world, without compromising
on durability and ease of operation. During the
design process we work closely with leading tyre
groups and vehicle manufacturers to ensure that our
products meet the needs of today’s vehicle design.
As a result, Hofmann tyre changers are approved
by most leading vehicle and tyre manufacturers.
Our directly employed network of UKAS & GEA
accredited engineers are on hand to provide routine
maintenance to keep your investment in the best
working condition.
See the website for our full range of products
Our national service division
With this experienced and dedicated team, the
HOFMANN brand has an unparalleled reputation
for providing the highest quality, excellent value and
great service.
Call us now... 01553 697233
UNCOMPROMISING QUALITY SINCE 1931
HOFMANN is a trademark of Snap-on Incorporated. © Snap-on Incorporated 2015. All other marks are trademarks of their respective holders.
Pictures are for illustration purposes only. Specifications are subject to change without notice.
hofmann.co.uk
T U R N TA B L E T Y R E C H A N G E R
Q U I C K
R E F E R E N C E
Guide for mounting & demounting in line with wdk* requirements
DEMOUNTING...
Demounting the upper bead
Demounting the lower bead
Mounting the upper bead
• Move the mounting head to the rear before
demounting the lower bead
• Position the tyre so that the valve is in 5
o’clock position
• Position the bead breaker disc so that it will
properly support the mounting procedure
• Press down on the tyre using the plastic
bead breaker disc until there is sufficient
space between tyre and rim. Carefully
lubricate the bead
• Lubricate the tyre lever
• Use the tapered roller to lever the lower bead
over the rim and demount the lower bead
MOUNTING...
• Fit the plastic tyre protector on the rim
flange at the point of traction
Clamping the rim
• Clamp the rim, use jaws with plastic
protectors for alloy rims
• Position the mounting head and return to
home position
• Clamp the triangular bead pusher on the
plastic tyre protector.
• Fit the tyre protector on the rim flange at
the level of the mounting head. Add the
Smart Bead Spacer Tail on tyres with hard
sidewalls. The valve should be approx.
10 cm right of the mounting head
• Adjust the mounting head in working
position
• Insert the tyre lever into the drop centre
of the rim between bead and rim flange
where the tyre protector is fitted
• On tyres with hard sidewalls also add the
Smart Bead Spacer Tail, making sure not to
compress the belt edge. Support the bead
pusher with the hand.
• Lubricate tyre sidewalls and bead (also
inside) with proper lubricant, but do not
lubricate the valve
Mounting the lower bead
• Continue mounting and gradually release the
pressure exerted by the bead pusher in order
to relieve the bead as much as possible
• Slowly complete the mounting procedure so
that bead and rim are protected
• Place the tyre on the rim, paying attention
to the direction of rotation of the tyre
• Use the tyre lever to lever the bead over
the mounting head, using the bead pusher
to push the bead into the drop centre in
3/6/9 o’clock positions
• Completely demount the upper bead
• Remove all tools and inflate the tyre
• Make sure the valve is opposite the
mounting head
• Mount the lower bead using the mounting
head
REQUIRED EQUIPMENT...
• Turntable tyre changer of type monty plus
• Pneumatic mounting tool
*Association of German Tyre Industry
MONTY RANGE
T Y R E
C H A N G E R S
monty® 3300-24 Fusion II EEWH710CE8
With more cars being fitted with larger wheels
it’s important to have the right equipment that
fits your customers needs.
The monty FUSION II is ideal for handling wheels
and tyres of a wide variety of sizes and types.
Featuring sliding jaws and an extended clamping
range it’s able to change wheels up to 24".
It also comes as standard with the pneumatic
mounting tool, easymont PRO for mounting
and demounting of UHP and run-flat tyres.
Scope of application:
Medium volume workshops up to and including
prestige wheels and run-flats.
Features
• Double acting bead breaker cylinder and large
bead breaker blade
• Mounting head and jaws are provided with
plastic protectors.
• Mounting head vertically and laterally adjustable
in spaced-apart position relative to rim
• The tilt-back post and the four ergonomic
pedals stand for user-friendly operation
• Outer clamping range up to 24"
• Re-designed easymont PRO suited for handling
run-flat tyre systems (additional optional
adaptors required for PAX and CSR)
• Accurate and quick operation due to the
self-centring four-jaw turntable controlled
by two clamping cylinders
hofmann.co.uk
Te c h n i c a l S p e c i f i c a t i o n
Inner clamping range
12 - 24"
Outer clamping range
10 - 24"
Rim width
3 - 12"
Max. tyre width
12"
Max. wheel diameter
1000 mm
Bead breaking range
40 - 340 mm
Dimensions (H x W x D)
1230 x 1340 x 1610 mm
Weight
300 kg
Compressed air supply
8 - 12 bar
Power supply
240 V 1Ph 50 Hz
Turntable speed
7 rpm
MONTY RANGE
T Y R E
C H A N G E R S
monty® 3300 Racing - EEWH749BE7
The monty 3300 racing, with the pneumatic
mounting tool Easymont PRO, has been
certified by wdk for gentle and user-friendly
mounting and demounting of UHP and run-flat
tyres in line with manufacturers’ specifications.
Scope of application:
Workshops with high tyre service volume
handling UHP and run-flat tyres.
Features
• Double-acting bead breaker cylinder
• Mounting head, vertically and laterally
adjustable in spaced-apart position relative
to the rim (pneumatically controlled)
• Four self centring turntable jaws
• Mounting head and jaws are provided with
plastic protectors
• Ergonomic and user-friendly arrangement
of pedals
• Quick-inflating valve
• Outer clamping range up to 24"
• Pneumatic tilt back post, pneumatically locked
in working position
• Re-designed easymont PRO suited for handling
run-flat tyre systems (additional optional
adaptors required for PAX and CSR)
Te c h n i c a l S p e c i f i c a t i o n
Inner clamping range
12 - 24"
Outer clamping range
10 - 24" (28" with optional adaptors)
Rim width
3 - 14"
• Tool box with integrated precision pressure
gauge
Max. tyre width
15"
Max. wheel diameter
1000 mm
• Bead breaker blade supported in three joints
and adjustable in five positions
Bead breaking range
40 - 440 mm
Dimensions (H x W x D)
1610 x 1230 x 1310 mm
Weight
310 kg
Compressed air supply
8 - 12 bar
Power supply
415 V 1 & 3Ph 50 Hz
Two turntable speeds*
7 and 13 rpm - 3 ph
• Pedal controlled inflation
• Certified to WDK (German Tyre Industry
Association)
*1Ph versions are single speed only
MONTY RANGE
T Y R E
C H A N G E R S
monty® 3300 Racing Plus - EEWH749BEO
The monty 3300 racing plus, with the pneumatic
mounting tool Easymont PRO and “plus” kit, has
been certified by wdk for gentle and user-friendly
mounting and demounting of UHP and run-flat tyres
in line with manufacturers’ specifications. With extra
tyre pushers and plastic protectors the monty 3300
racing plus gives you more protection when fitting
the tyre resulting in less damage to the rim.
Scope of application:
Workshops with high tyre service volume handling
UHP and run-flat tyres.
Features
• Double-acting bead breaker cylinder
• Mounting head, vertically and laterally
adjustable in spaced-apart position relative
to the rim (pneumatically controlled)
PLUS Kit
• Plastic bead breaker disc
• Triangular bead pusher
• Four self centring turntable jaws
• Plastic protector for bead breaker blade
• Mounting head and jaws are provided with
plastic protectors
• Spacers for bead breaker blade
• Ergonomic and user-friendly arrangement
of pedals
• Smart bead spacer tail
• Tyre lever plus
• Plastic tyre protector
• Plus kit operation manual HOFMANN
• Quick-inflating valve
* 30 mm rod included in retrofit kits only
• Outer clamping range up to 24"
• Pneumatic tilt back post, pneumatically locked
in working position
Te c h n i c a l S p e c i f i c a t i o n
Inner clamping range
12 - 24"
• Re-designed easymont PRO suited for handling runflat tyre systems (additional optional adaptors required
for PAX and CSR)
Outer clamping range
10 - 24" (28" with optional adaptors)
Rim width
3 - 14"
Max. tyre width
15"
• Pedal controlled inflation
Max. wheel diameter
1000 mm
Bead breaking range
40 - 440 mm
Dimensions (H x W x D)
1610 x 1230 x 1310 mm
• Bead breaker blade supported in three joints and
adjustable in five positions
Weight
310 kg
Compressed air supply
8 - 12 bar
• Certified to WDK (German Tyre Industry Association)
Power supply
415 V 1 & 3Ph 50 Hz
Two turntable speeds*
7 and 13 rpm - 3 ph
• Tool box with integrated precision pressure gauge
*1Ph versions are single speed only
hofmann.co.uk
MONTY RANGE
T Y R E
C H A N G E R S
monty® 3300 Racing AT Plus - EEWH751AE1
The monty 3300 racing AT plus is a semi-automatic tyre
changer with reinforced post and automatic mounting
head with integrated finger so that the tyres can be
handled without a tyre lever.
Scope of application:
Workshops with high tyre service volume handling UHP
and run-flat tyres.
Features
• Certified to WDK (German Tyre Industry Association)
• Pneumatic mounting tool easymont PRO and plus kit for
handling UHP and run-flat tyre systems
• Automatic mounting tool with integrated lever
– hence no tyre lever is required for demounting
• Double-acting bead breaker cylinder
• Bead breaker blade supported in three joints
• Bead breaker arm adjustable to two positions
• Mounting head vertically and laterally adjustable in spaced
apart position relative to the rim (pneumatically controlled)
• Reinforced pedal-operated post, pneumatically tilted
backwards and forwards
• Pneumatic tilt back post, pneumatically locked in
working position
• Four self centring turntable jaws
Te c h n i c a l S p e c i f i c a t i o n
• Plastic protection inside jaws and on mounting head
to avoid damage to alloy rims
Inner clamping range
12 - 24"
Outer clamping range
10 - 24" (28" with optional adaptors)
• Ergonomic and user-friendly arrangement of pedals
Rim width
3 - 14"
Max. tyre width
15"
• Pedal controlled inflation and quick-inflating valve
Max. wheel diameter
1000 mm
• Tool box with integrated precision pressure gauge
Bead breaking range
40 - 440 mm
• GP version: external bead seating kit
Dimensions (H x W x D)
1950 x 1350 x 1650 mm
Weight
363 kg
Compressed air supply
8 - 12 bar
Power supply
415 V 1 & 3Ph 50 Hz
Two turntable speeds*
7 and 13 rpm
Options
• PAX & CSR adapters
• Optional adaptors increase clamping range to 28"
*1Ph versions are single speed only
MONTY RANGE
T Y R E
C H A N G E R S
monty® 8600 Platinum - EEWH742AE1
The monty 8600 Platinum is a leverless high-productivity
tyre changer for passenger car and light van tyres.
The dual-disc bead breaker, the centre clamp system
and the automatic mounting tool make the monty 8600
Platinum one of the most productive tyre changer solutions
on the market. Safe and accurate on standard tyres,
UHP (Ultra High Performance) and run-flat tyres, it has a
unique Electronic sync dual-disc bead breaker ensuring
gentle, faster, easier, more ergonomic and effortless bead
breaking without damaging tyre bead or sidewall.
Scope of application:
Workshops with high service volume on UHP low profile
& run flat tyres.
Features
• Wheel lift
• Centre type quick fit wheel clamping flange
• Tool box
• Mounting tool with patented integrated
demounting finger
• Inflation gauge
• Control panel
• Mounting / demounting roller and bead breaker disc
• Bead press arm
• Mirror
• Accessory tray
• Control pedals
• Laser pointer for accurate positioning of the mounting tool
Te c h n i c a l S p e c i f i c a t i o n
Max. wheel diameter
1200 mm
Max. rim width
13"
Dimensions (H x W x D)
2260 x 1700 x 1500 mm
• Top-side bead seating kit
Weight
430 kg
• Sidewall press arm
Compressed air supply
8 - 12 bar
Power supply
230 VAC 1ph 50/60 Hz
Turntable speed*
7 / 14 rpm
• ESDB® – Electronic synchronised dual-disc
bead breaker for ergonomic operation
*1Ph versions are single speed only
hofmann.co.uk
MONTY RANGE
T Y R E
C H A N G E R S
monty® Quadriga - EEWH734AEB
This automatic tyre changer with its quick
procedures, controlled power and accuracy
guarantees optimum results because all
operations are highly efficient and laboursaving. With no risk damage to both tyres
and rims, this tyre changer is designed
to handle all types of wheels and tyres,
especially UHP and run-flat tyres.
Scope of application:
Designed for prestige wheels, including low
profile & run flat tyres
Features
• Certified to WDK (German Tyre
Industry Association)
• Non-contact detection of rim
contour by laser
• Automatic control of mounting
and demounting tools
• Automatic labour-saving and
accurate positioning of wheels
on clamping flange by means of
wheel lift
• Hydraulic clamping of wheel via
clamping flange and quick nut
• Rotating bead breaker disc with
adjustable pitch angle
Te c h n i c a l S p e c i f i c a t i o n
Rim diameter
12 - 30"
• Integrated bead pusher
Max. wheel diameter
47" / 1200 mm
• Pedal-controlled inflator
Max. rim width
17"
Dimensions (H x W x D)
1850 x 1290 / 1350 x 2240 mm
Weight incl. lift
820 kg
Compressed air supply
8 - 12 bar
Power supply
230 VAC 1ph 50Hz
• Roller bead breaker for breaking
both beads - reduces risk of rim &
tyre damage
MONTY RANGE
T Y R E
C H A N G E R S
monty® 3650 - Truck - 6027218
Truck tyre changer for mounting and demounting tubeless
truck and bus tyres on steel or alloy rims
Scope of application:
For trucks & buses with rim sizes up to 1200mm
Features
• Access ramp for easy loading of the tyre changer
• Two rollers for bead breaking and tyre changing allows
quick operation
• Inner and outer beads are demounted in a single process
• Innovative design ensures rollers are always centred relative
to the wheel
• Wheels, rollers and control console positioned relative to each
other to make retreading of tyres extremely convenient
• Easy control via integrated control console
• Clamping of wheel by its centre bore via cone and wing nut
hofmann.co.uk
Te c h n i c a l S p e c i f i c a t i o n
Rim diameter
16 - 22.5"
Wheel width
20"/500 mm
Max. wheel diameter
47" / 1200 mm
Bead breaking force
18 kn
Dimensions (H x W x D)
1100 x 1290 x 1270 mm
Weight
330 kg
Power supply
415 V 3Ph 50 Hz
Turntable speed
4 rpm
MONTY RANGE
T Y R E
C H A N G E R S
SIZE DOES
MATTER
H O FM A N N T Y R E C H A N G E R S
Covering wheels up to 56 inches*
*56" is achievable with adaptors on the larger models.
HOFMANN is a trademark of Snap-on Incorporated. © Snap-on Incorporated 2015. All other marks are trademarks of their respective holders.
Pictures are for illustration purposes only. Specifications are subject to change without notice.
◄ Scan this code to view our full range of products on the HOFMANN website
D e n n e y R o a d , K i n g ’s Ly n n , N o r f o l k P E 3 0 4 H G
tel: +44 (0) 1553 697233 - fax: +44 (0) 1553 697254
e m a i l : u k e q u i p m e n t @ s n a p o n . c o m - h o f m a n n . c o . u k
IS A BRAND WITHIN