Dr. R. K. Saket
Academic and Research Profile ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Dr. R. K. Saket Ph. D. (Power System Reliability Engineering) Associate Professor (Electrical Machines and Drives) Residence: H-10, Brij Enclave, BHU-DLW Road, Near Life Line Hospital, Sunderpur, Varanasi-221005 (UP), India. Phone (Office): 0542-6702837, Mobile: (+91) 9451067022 Email : [email protected], [email protected] Research Areas [1]. Reliability Engineering [2]. Power System Reliability [3]. Electrical Machines and Drives [4]. Renewable Sources of Electrical Energy [5]. Reliability of SEIG/DFIG and MWW Based MHPP [6]. Performance and Reliability Issues of Ad-hoc Networks Selected Scientific Articles and Research Publications [A] INTERNATIONAL JOURNALS [1] Rishikesh Choudhary and R. K. Saket (2015), "A Critical Review on the Self-Excitation Process and Steady State Analysis of an SEIG Driven by Wind Turbine", Renewable and Sustainable Energy Reviews, Science Direct (SCI Journal), Volume: 47, July 2015, pp: 344-353. Web-site: http://www.sciencedirect.com/rser. [2] Lokesh Varshney and R. K. Saket (2014), “Reliability Evaluation of SEIG rotor core magnetization with minimum capacitive excitation for unregulated renewable energy applications in remote areas”, Ain Shams Engineering Journal, Science Direct, September 2014; volume: 5, issue: 3, pp: 751-757. Web-site: http://www.sciencedirect.com/asej. [3] Sachin Kumar Gupta and R. K. Saket (2014), “Impact of ART and DPC in AODV Routing of MANET Environment”, PENSEE Journal (International Science Index), Espaces Marx, Paris, France, volume: 76, issue: 9, pp: 408-423. Web-site: http://www.scimagojr.com/pensee. [4] Sachin Kumar Gupta, Rohit Sharma and R. K. Saket (2014), "Effect of Variation in Active Route Timeout and Delete Period Constant on the Performance of AODV Protocol", International Journal of Mobile Communications, Inderscience Publishers (UK), SSCI Journal; Volume: 12, no: 02, pp: 117-191. Web Site: http://www.indercsience.com/ijmc. [5] R. K. Saket (2013), "Design Aspects and Probabilistic Approach for Generation Reliability Evaluation of MWW Based Micro-hydro Power Plant", Renewable and Sustainable Energy Reviews, Science Direct (SCI Journal), Volume: 28, December 2013, pp: 917-929. Web-site: http://www.sciencedirect.com/rser. [6] Lokesh Varshney, R. K. Saket and Saeid Eslamian (2013), "Power Estimation and Reliability Evaluation of Municipal Waste Water and Self-Excited Induction Generator-Based Micro Hydropower Generation System", International Journal of Hydrology Science and Technology, Inderscience Publishers (UK), ISSN (Online): 7816, ISSN (Print): 2042-7808, Vol. 03, no: 02, pp: 176-191, 2013. Web-Site: http://www.indercsience.com/ijhst. [7] R. K. Saket and Lokesh Varshney (2012), "Self Excited Induction Generator and Municipal Waste Water Based Micro Hydro Power Generation System", International Journal of Engineering and Technology, Published by: International Association of Computer Science and Information Technology Press, Singapore, Volume: 04, Number: 03, pp. 282-287, Web-Site: www.ijetch.org/ijet. [8] R. K. Saket; Bharat Bhushan Sagar and Col. Gurmit Singh (2012), “ATM Reliability and Risk Assessment Issues Based on Fraud, Security and Safety”, International Journal of Computer Added Engineering and Technology, Inderscience Publishers (UK), Volume: 04; No: 03; pp: 272-293. Web Site: http://www.indercsience.com/ijcaet. [9] Sachin Kumar Gupta and Dr. R. K. Saket (2011), “Routing Protocols in Mobile Ad-Hoc Networks”, International Journal of Computer Applications, IJCA Special Issue on Electronics, Information and Communication Engineering (ICEICE-2011), Foundation of Computer Science, New York (USA), ISBN: 978-93-80865-63-9, Number: 01; Article: 03; pp: 24-27; Web Site: http://www.ijcaonline.org/iceice. [10] Sachin Kumar Gupta and R. K. Saket (2011), “Performance Metric Comparison of AODV and DSDV Routing Protocols in MANETs Using NS-2”, International Journal of Research and Review in Applied Sciences, Volume: 07, Issue: 03; pp: 339 - 350; Publication Year: June 2011. Web Site: http://www.arpapress.com/ijrras. [11] Bharat Bhushan Sagar; Col. Gurmit Singh and R. K. Saket (2011), “Design Concept and Reliability Evaluation of ATM System”, International Journal of Computer Added Engineering and Technology, Inderscience Publishers (U. K.), Volume: 03; No: 01; pp: 53-76. DOI:10.1504/IJCAET.2011.037865. Site: http://www.indercsience.com/ijcaet. [12] A. K. Bhardwaj, R. C. Bansal, R. K. Saket and A. K. Srivastava (2010), “Electric Power Demand Forecasting of KAVAL cities,” International Journal of Electrical and Power Engineering, DOI: 10.3923/ijepe.2010.85.89, Volume: 4, Issue: 2, pp: 85 – 89, Web Site: http://www.medwelljournals.com/ijepe. [13] Anil Kumar; R. K. Saket; C. L. Varshney and S. L. Maurya (2010), “Finite difference technique for reliable MHD steady flow through channels permeable boundaries”, International Journal of Biomedical Engineering and Technology, Inderscience Publishers (U. K.), Volume: 04; Number: 02; pp: 101 – 110. Web Site: http://www.inderscience.com/ijbet. [14] K. B. Singh; R. K. Saket; and S. Chatterji (2010), “The Effect of Derating on Component Selection and Product Design”, International Journal of Reliability and Safety, Inderscience Publishers (UK), Volume: 04; Number: 01; pp: 89-103. DOI: 10.1504/IJRS.2010. 029566. Web Site: http://www.indercsience.com/ijrs. [15] R. K. Saket; R. C. Bansal and Col. Gurmit Singh (2009), “Power Systems Component Modelling and Reliability Evaluation of Generation Capacity”, International Journal of Reliability and Safety, Inderscience Publishers (U. K.), Volume: 03; No: 04; pp: 427441. September 21, 2009, Web Site: http://www.indercsience.com/ijrs. [16] R. K. Saket; Wg. Cdr. S. P. Kaushik and Col. Gurmit Singh (2008), “Probabilistic Approach for Biorhythmic Analysis to Prevent Aviation Accidents,” International Journal of Intelligent Defence Support Systems, Inderscience Publishers (UK), Volume: 01; No: 04; pp: 271-289. Monday, May 11, 2009, Web Site: http://www.indercsience.com/ijidss. [17] R. K. Saket and Anil Kumar (2008), “Reliability of convective diffusion process in Stenosis blood vessels”, Chemical Product and Process Modeling, Vol. 03, Issue 01, pp: 01-23, Article: 25, Publication Date: June 05, 2008, Produced by the Berkeley Electronic Press, 2809 Telegraph Avenue, Suite 202, Berkeley, Canada, 94705, Web Site: http://www.bepress.com/cppm/vol3/iss1/25. [18] R. K. Saket; R. C. Bansal and Col. Gurmit Singh (2007), “Reliability Evaluation of Power System considering voltage stability and continuation power flow”, Journal of Electrical Systems, Engineering and Scientific Research Groups, France; Issue 3, No: 2, June 2007, pp: 48-60, Web Site: http://journal.esrgroup.org/jes. [19] Dr. R. K. Saket; Dr. R. C. Bansal and K. S. Anand Kumar (2007), “Reliability Evaluation of Micro Hydro Photo Voltaic Hybrid Power Generation System Based on municipal waste water”, GMSARN International Journal on sustainable Development, Thailand, volume: 1, No: 1, pp: 13 - 20, June 2007, Web Site: http://www.gmsarn.org. [20] Dr. R. K. Saket; Dr. R. C. Bansal and Prof. (Col.) Gurmit Singh (2006), “Generation Capacity Adequacy Evaluation based on Peak Load Considerations”, The South Pacific International Journal on Natural Sciences, University of the South Pacific, Suva, Fiji Island, Vol.24, pp: 38-44, Web Site: http://www.fst.usp.ac.fj. [21] Dr. R. C. Bansal; Dr. Ahmed F. Zobaa and Dr. R. K. Saket (2005), “Some issues related to power generation using wind energy conversion system: An Overview”, International Journal of Emerging Electric Power System, volume: 3, Issue: 2, pp: 01-19, October 26, 2005, Article 1070, Produced by the Berkeley Electronic Press, 2809 Telegraph Avenue, Suite 202, Berkeley, CANADA 94705, Web Site: http://www.bepress.com. [B] NATIONAL JOURNALS [1] Sachin Kumar Gupta, Manoj Yadav and Dr. R. K. Saket (2015), "Mathematical Analysis for Stability Based Routing in Ad-hoc Networks", Special issue on science and Technology, Prajna research journal, BHU Varanasi, India. Volume: 60, Part-2, pp: 187-196. http://www.bhu.ac.in [2] R. K. Saket (2015), “Development of Municipal Waste Water Based Micro-hydro Power Plant in BHU Varanasi", Special issue on science and Technology, Prajna research journal, BHU Varanasi, India. Volume: 60, Part-2, pp: 202-207. http://www.bhu.ac.in [3]. L. D. Arya; S. C. Choube and R. K. Saket (2001); “Generation system Adequacy evaluation using probability theory”, Journal of the Institution of Engineers (India), vol.81, March 2001, pp: 170-174., Web Site: http://www.ieindia.org [4]. L. D. Arya; S. C. Choube and R. K. Saket (2000); “Composite system reliability evaluation based on static voltage stability limit”, Journal of the Institution of Engineers (India), vol.80, February 2000, pp: 133-140, Web Site: http://www.ieindia.org [C] INTERNATIONAL PEER REVIEWED CONFERENCES [1] A. Y. Abdelaziz, R. A. Swief, M. Ezzat, Waleed A. Hamed, R. K. Saket and O. P. Bharti (2015), “The Impact of Distributed Generation on Voltage Stability Using Differential Evolution Optimization Algorithm”, International Conference on Communication, Computing and Power Technologies, Springer, 22nd - 23rd April, 2015, Chennai, India. http://www.icccpt.com [2] Ahmed M. Atallah, Almoataz Y. Abdelaziz, Mohamed Ali, R.K.Saket, O. P. Bharti (2015) “Reliability assessment and economic evaluation of offshore wind farm using stochastic probability”, International Conference on Power, Circuit and Information Technologies, Springer, 27th - 28th April, 2015, Bangalore, India. http://www.icpcit.com [3] Sachin Kumar Gupta and R. K. Saket (2015), "Analyzing the outcome of route maintenance parameters with VBR traffic on stability of AODV routing for a realistic scenario in MANET using QualNet", International Conference on Telecommunication Technology and Management, 1112 April 2015, IIT Delhi, New Delhi, India. http://www.iitd.ac.in [4] Lokesh Varshney and Dr. R. K. Saket (2014), “Reliability Indices Evaluation of SEIG Rotor Core Magnetization with Minimum Capacitive Excitation for WECs”, International Conference on Electrical Machines and Power Electronics, WASET: International Science Index, Paris, France, volume: 08, issue: 09, pp: 1107-1112, Date: September 22, 2014. http://www.waset.org. [5] Dr. R. K. Saket (2014), “Design Components and Reliability Aspects of Municipal Waste Water and SEIG Based Micro Hydro Power Plant”, International Conference on Electrical Power Engineering, WASET: International Science Index, London (UK), volume: 08, issue: 09, pp: 14721482, Date: September 26, 2014. http://www.waset.org/icepe. [6] A. Y. Abdelaziz, M. Ezzat, W. Sameh, R. K. Saket and Anand Kumar K. S. (2014), “An Integrated Passive Islanding Detection Method for grid Connected PV Distributed Generators” International Conference on Power Electronics and Renewable Energy Systems, Proceeding published by LNEE series of SPRINGER, Organized at Rajalakshmi Engineering College, Chennai, India during 24-26 April, 2014, pp: 01-08. Web-Site: http://www.spinger.com [7] Ahmed M. Atallah, Almoataz Y. Abdelaziz, Mohamed Ali, R. K. Saket and Anand Kumar K. S. (2014), “Cable Laying Precautions in Offshore Wind Farms with Reactive Power Compensation”, International Conference on Power Electronics and Renewable Energy Systems, Proceeding published by LNEE series of SPRINGER, Organized at Rajalakshmi Engineering College, Chennai, India. April 24-26, 2014, pp: 01-08. Site: http://www.spinger.com [8] Luckey Chaukse, P. Akash Pattanaik and R. K. Saket (2014), “Maximum Power Point Tracking of Photovoltaic System Using Two Input and Two Output Fuzzy System”, International Conference on Power Electronics and Renewable Energy Systems, Proceeding published by LNEE series of SPRINGER, Organized at Rajalakshmi Engineering College, Chennai, India during 24-26 April, 2014, pp: 01-08. Web-Site: http://www.spinger.com [9] Luckey Chaukse, P. A. Pattanaik and R. K. Saket (2014), “Maximum Power Point Tracking of Photovoltaic System Using Feedback Fuzzy System”, IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE-2014), Date of Conference: May 9-11, 2014, DOI: 10.1109/ICRAIE.2014.6909290, Print ISBN: 978-1-4799-4041-7, pp: 01 - 06. Web-Site: http://www.ieeexplore.ieee.org [10] Sachin Kumar Gupta, Manoj Yadav and R. K. Saket (2013), "An Automaton Model for Stable Routing in Ad-hoc Network based on Two State CTMC", IEEE EMS: 2013, In Proceedings of the IEEE UK-Sim AMSS 7th European Modelling Symposium on Mathematical Modelling and Computer Simulation, Manchester (UK), 2022 November 2013, Digital Object Identifier: 10.1109/EMS.2013.92, publications date: 20. 11. 2013, pp: 555-559, 2013. Web Site: http://www.ems2013.info [11] Lokesh Varshney, Albert Newwel and Dr. R. K. Saket (2013), “Reliability Evaluation of Excitation of the Self Excited Induction Generator,” In proceeding of the fourth International conference on Control, Communication and Power Engineering, Springer, April 26-27, 2013, Web-Site: http://www.spinger.com [12] Lokesh Varshney and R. K. Saket (2013), “Reliability Evaluation of Residual Magnetism in Rotor of the SEIG,” In Proceeding of the IEEE Student Conference on Engineering and Systems (SCES) - 2013, Motilal Nehru National Institute of Technology, Allahabad (UP), April 12-14, 2013. Web-site: http://www.ieeeexplore.org [13] Lokesh Varshney and Dr. R. K. Saket (2012), “Power Estimation of MWW based Generation System Using SEIG,” IEEE Students International Conference on Electrical, Electronics and Computer Sciences (IEEE SCEECS 2012), Maulana Azad National Institute of Technology, Bhopal (Madhya Pradesh), India, pp: 130 - 134, March 01 - 02, 2012, Web Site: http://www.ieeeexplore.org/sceecs [14] Lokesh Varshney, Vikas Varshney, Albert Newwel, R. K. Saket (2012), “Squirrel Cage Rotor Design for Safety and Reliability Improvement of a Three Phase Induction Machine”, Third International Conference on Trends in Information, Telecommunication and Computing, Proceeding published by LNEE series of SPRINGER, New York. Volume 150, pp 267-273. Web-Site: http://www.spinger.com [15] Dr. R. K. Saket and Lokesh Varshney (2011), “Self Excited Induction Generator and Municipal Waste Water based Micro Hydro Power Generation System,” IEEE International Conference on Product Development and Renewable Energy Resources (ICPDRE 2011), Chennai (Tamil Nadu), India. February 19 - 20, 2011, pp: 180185. Web-site: http://www.iacsit.org/icpdre. [16] Dr. R. K. Saket and Lokesh Varshney (2010), “Development and Performance Evaluation of Municipal Waste Water based Micro Hydro Power Generation System,” International Conference on Green Power Generation: Vision 2020, Hindalco Industries Limited, Renusagar Power Division, The Institution of Engineers (India), Anpara local centre, Sonebhadra, pp: 225-233, December 10 - 12, 2010, Web Site: www.ieindia.org [17] R. K. Saket and A. F. Zobaa (2009), “Power System Reliability Evaluation Using Safety Factor Concept and Simpson’s 1/3rd Rule”, The International Federation of Automatic Control (IFAC), 6th IFAC Symposium on Power Plants and Power System Control (PPPSC), Volume: 01, Part: 01, 5 - 8 July, 2009, Tampare Hall, Finland (UK), pp: 68-73. DOI: 10.3182 / 20090705 4 – SF – 2005. 00014. ISBN: 978-1-61782-879-9, Elsevier Publishers, Web-Site: http://www.automaatioseura.fi/confprog/conference [18] R. K. Saket (2008); “Design, Development and Reliability Evaluation of Micro Hydro Power Generation System Based on Municipal Waste Water”, In proceedings of the IEEE Electrical Power and Energy Conference: 2008 (EPEC 2008), IEEE Canada and IEEE Vancouver Section, The University of British Columbia, Vancouver, BC Canada, V6T1Z4, British Columbia, 06 - 07 October, 2008, pp: 01-08, DOI: 10.1109/EPC.2008.4763355, Web Site: http://www.ieeexplore.ieee.org [19] Md. Fahim Ansari; S. Chatterji and R. K. Saket (2008); “Solar Photovoltaic Power Conversion Using Maximum Power Point Tracking and Design”, Book Chapter and Research Paper: In Proceeding of the RENEWABLE ENERGY ASIA 2008: an International Conference and 4th see Fourm Meeting, SPV-P005, 11-13 December, pp: 499-507, 2008; Indian Institute of Technology, New Delhi (India), Web Site: http://www.iitd.ac.in [20] Md. Fahim Ansari; S. Chatterji; R. K. Saket; Ashfaq Ahamad and Anis Afzal (2008); “Three Phase High Power Soft Switched DC/DC Converter for Low Voltage Fuel Cell”, Book Chapter and Research Paper: In Proceedings of Renewable Energy and Environment for Sustainable Development, pp: 1073- 1082, 2008, Edited by: V. K. Vijay and H. P. Garg, Narosa Publishers, New Delhi (India), Web Site: http://www.narosapublisher.com [21]. R. K. Saket and R. C. Bansal (2006); “Reliability Evaluation of Interconnected composite power system considering voltage stability at continual power flow ”, In Proceedings of the International Conference on power system operation in deregulated regime, March, 06-07, 2006 , Electrical Engineering Department, Institute of Technology, Banaras Hindu University, Varanasi (India), pp: 339-348, Web Site: http://www.itbhu.ac.in [22]. R. K. Saket and K. S. Anand Kumar (2006); “Hybrid Micro Hydro Power Generation using Municipal Waste Water and its Reliability Evaluation”, In proceedings of the Greater Mekong Sub region Academic and Research Network (GMSARN) International Conference: 6 - 7 December, 2006, Sustainable Development: Issues and Prospects for the Greater Mekong Sub region, Asian Institute of Technology, Bangkok, Thailand, pp: 13-20, Web Site: http://www.gmsarn.ait.ac.th , http://www.gmsarn.org [23]. R. K. Saket; and R. C. Bansal (2005); “Generating Capacity Reliability evaluation using Gaussian distribution approach”, In Proceedings of the International conference on Reliability and Safety Engineering, Dec 21-23, 2005, Reliability Engineering Centre, Indian Institute of Technology, Kharagpur (India), pp: 261-274, Web Site: http://www.iitkgp.ac.in [D] PRESTIGIOUS BOOK CHAPTERS [1]. Dr. R. K. Saket and Dr. Saeid Eslamian (2015); “Waste Water for Hydro-Electric Power Generation”, Handbook Title: URBAN WATER REUSE HANDBOOK, Edited by: Dr. Saeid Eslamian (Isfahan University of Technology, Isfahan, Iran), Publisher: Taylor and Francis, London, W1T 3JH (UK), Publication Date: December 01, 2015 (In Press). Web Site: http://www.taylorandfrancis.com. [2] A. Y. Abdelaziz, M. Ezzat, W. Sameh, R. K. Saket and Anand Kumar K. S. (2015), “An Integrated Passive Islanding Detection Method for grid Connected PV Distributed Generators”, Book: Power Electronics and Renewable Energy Systems, Publisher: Springer (LNEE Series), Publication date: January 01, 2015, pp: 131-144. Web-Site: http://www.spinger.com. [3] Ahmed M. Atallah, Almoataz Y. Abdelaziz, Mohamed Ali, R. K. Saket and Anand Kumar K. S. (2015), “Cable Laying Precautions in Offshore Wind Farms with Reactive Power Compensation”, Book: Power Electronics and Renewable Energy Systems, Publisher: Springer (LNEE Series), Publication date: January 01, 2015, pp: 553-562. Web-Site: http://www.spinger.com. [4] Luckey Chaukse, P. A. Pattanaik and R. K. Saket (2015), “Maximum Power Point Tracking of Photovoltaic System Using Two Input and Two Output Fuzzy System”, Book: Power Electronics and Renewable Energy Systems, Publisher: Springer (LNEE Series), January 01, 2015, pp: 245 - 253. Web-Site: http://www.spinger.com. [5]. R. K. Saket (2011); “Reliability Evaluation of Defence Support Systems”, Book Title: Innovations in Defence Support Systems: 2, ISBN: 978-3-642-17763-7, Socio-Technical Systems Series: Studies in Computational Intelligence, Vol. 338, pp: 239-284, 1st edition, Edited by: Dr. Lakhmi C. Jain; Aidman, Eugene; Abeynayake, Canicious; University of South Australia, Australia, Springer - Verlag, Berlin (Germany) and Heidelberg GmbH & Co. K, Publication date: February 09, 2011. Site: http://www.springer.com/engineering/books [6]. R. K. Saket; Wg. Cdr. S. P. Kaushik and Col. Gurmit Singh (2011), “Biorhythmic Analysis to Prevent Aviation Accidents,” Book Title: Innovations in Defence Support Systems: 2, ISBN: 978-3-642-17763-7, Socio-Technical Systems Series: Studies in Computational Intelligence, Vol. 338, pp: 205-238, 1st edition, Edited by: Dr. Lakhmi C. Jain; Aidman, Eugene; Abeynayake, Canicious (Eds.); University of South Australia, Australia, Springer Verlag, Berlin (Germany) and Heidelberg GmbH & Co. K, Publication date: February 09, 2011. Web Site: http://www.springer.com/engineering/mathematical/book [7]. Fang Yao, R. C. Bansal, Z. Y. Dong, R. K. Saket and J. S. Shakya (2011); “Wind Energy Resources: Theory, Design and Applications”, Book Title: Handbook of Renewable Energy Technology, Section I: Wind Energy and Their Applications, Edited by: Dr. Ahmed F. Zobaa (Brunel University, UK) and Dr. R. C. Bansal (The University of Queensland, Australia), pp: 03 – 20, ISBN-13 978-981-4289-06-1, ISBN-10 981-4289-06-X, World Scientific Publishing House, Singapore, Publication Year: 2011, Web Site: http://www.worldscientific.com RESEARCH SUPERVISION Ph. D. Level [A] Ph. D. Degree Awarded: (02) Awarded by Indian Institute of Technology (BHU), Varanasi (UP) India: (01) [1]. Mr. Lokesh Varshney [ID: 09604EN003], “Performance and Reliability Evaluation of Self Excited Induction Generator,” Department of Electrical Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi, (U. P.), India, under supervision of Dr. R. K. Saket, 2014. Awarded by Other Indian Universities: (01) [1]. Mr. Bharat Bhushan Sagar [ID: 2006PHCOSC205]; “Evaluation of Software Reliability Growth Models,” Faculty of Engineering and Technology, Sam Higginbottom Institute of Agriculture, Technology and Sciences-Deemed University [Formerly: Allahabad Agricultural Institute - Deemed University], Allahabad (U.P.); India under supervision of Prof. (Col.) Gurmit Singh and Dr. R. K. Saket (Co-Advisor), 2011. [B] Ph. D. Thesis Submitted: (01) [1+. Mr. Jitendra Singh Shakya *2009PHEE101+; “Performance Characteristics Evaluation of Self Excited Induction Generator for Wind Power Applications,” Faculty of Engineering and Technology, Sam Higginbottom Institute of Agriculture, Technology and Sciences - Deemed University, Allahabad (UP); India under supervision of Prof. (Col.) Gurmit Singh and Dr. R. K. Saket (Co-Advisor): Thesis submitted in April 2015. [C] Ph. D. Research Work in Progress: (04) IIT (BHU) Research Scholars: (02) [1]. Mr. Sachin Kumar Gupta [ID: 12604EN005], “Performance and Reliability Evaluation of AODV protocol” Department of Electrical Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi, (U. P.), India, under supervision of Dr. R. K. Saket: in progress from the Session: 2012-2013. [2]. Mr. Om Prakash Bharti [ID: 13081010], “Direct Power Control and Reliability Assessment of DFIG Using DSMC Approach” Department of Electrical Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi, (U. P.), India, under supervision of Dr. R. K. Saket (Supervisor) and Prof. S. K. Nagar (Co-Guide): in progress from the Session: 2013-2014. Other Indian University’s Research Scholars: (02) [1]. Mr. Kunwar Bahadur Singh *17609+, “Identification Analysis and Compensation of Harmonics in Power System Networks Using Hybrid Filters,” Faculty of Engineering and Technology, Punjab University, Chandigarh (Punjab); India under supervision of Prof. (Dr.) S. Chatterji (National Institute of Technical Teachers Training and Research) and Dr. R. K. Saket (Co-Advisor): in progress from July 2009. [2]. Mr. Lokendra Kumar Sharma [01EE2010+, “Reliability and Performance Evaluation of Software Reliability Growth Models”, Faculty of Engineering and Technology, Mewar University, Chittorgarh (Rajasthan), India; under Supervision of Dr. R. K. Saket and Dr. B. B. Sagar: In Progress from July 2010. M. Tech. Level [A] M. Tech. Dissertation Completed (2006 - 2007 to 2012- 2013) [1]. Mr. P. Surendra Babu (GEE-0521); “Reliability Evaluation of Electrical Machines for reliable operation of the power plant,” Department of Electrical Engineering (Specialization: Electrical Machines and Drives), Indian Institute of Technology, Banaras Hindu University, Varanasi, (U. P.), India, 2007. [2]. Mr. Rajesh Kumar (GEE-0625); “Parameter Measurement of Automatic Induction Machine Using Standstill Frequency Domain Tests,” Department of Electrical Engineering (Specialization: Electrical Machines and Drives), Indian Institute of Technology, Banaras Hindu University, Varanasi, (U. P.), India, 2008. [3]. Mr. Lokesh Varshney (GEE-0700); “Design, Development and Reliability Evaluation of Induction Generator for MHPS,” Department of Electrical Engineering (Specialization: Electrical Machines and Drives), Indian Institute of Technology, Banaras Hindu University, Varanasi, (U. P.), India, 2009. [4]. Ms. Oinam Lotika Devi [Roll No.: 07030413; Enrollment No: 295189]; “Condition Monitoring of Three Phase Induction Motor”, Under Supervision of Prof. (Dr.) J. P. Tewari and Dr. R. K. Saket (Co-Advisor); Department of Electrical Engineering (Specialization: Electrical Machines and Drives), Indian Institute of Technology, Banaras Hindu University, Varanasi, (U. P.), India, 2009. [5]. Mr. Sushil Kumar Solanki (08304EN002, Enrollment No: 304492); “LIM Approach for Fault Tolerant Robust Control of Three Phase Induction Motor”, Department of Electrical Engineering (Specialization: Electrical Machines and Drives), Indian Institute of Technology, Banaras Hindu University, Varanasi, (U. P.), India, 2010. [6]. Mr. Pankaj Kumar Verma [09304EN007], “Excitation Capacitance Requirements and Performance Evaluation of Self Excited Induction Generator for Three Phase Loads”, Department of Electrical Engineering (Specialization: Electrical Machines and Drives), Indian Institute of Technology, Banaras Hindu University, Varanasi, (U. P.), India, 2011. [7]. Mr. Sachin Kumar Gupta [09316EN006], “Performance Evaluation of DSDV and AODV Routing Protocols in Mobile Ad-hoc Networks Using Network Simulator-2”, Department of Electrical Engineering (Systems Engineering), Indian Institute of Technology, Banaras Hindu University, Varanasi, (U. P.), India, 2011. [8]. Mr. Hemant Shukla [09316EN004], “Design of Water Turbine for Performance and Reliability Improvement of Micro Hydro Power Generation System”, Department of Electrical Engineering (Systems Engineering), Indian Institute of Technology, Banaras Hindu University, Varanasi, (U. P.), India, 2011. [9]. Mr. Albert Newwel [10316EN008+, “Generation System Reliability Evaluation Using Probability Theory”, Department of Electrical Engineering (Systems Engineering), Indian Institute of Technology, Banaras Hindu University, Varanasi, (U. P.), India, 2012. [10]. Mr. Raja Ram Kumar [10304EN007+, “Decouple control of induction motor using dSPACE and IPM”, Department of Electrical Engineering (Specialization: Electrical Machines and Drives), Indian Institute of Technology, Banaras Hindu University, Varanasi, (U. P.), India, 2012. [11] Mr. A. Naveen Reddy [10304EN002+, “Sensor less FOC and DTC schemes for Induction Motor”, Department of Electrical Engineering (Specialization: Electrical Machines and Drives), Indian Institute of Technology, Banaras Hindu University, Varanasi, (U. P.), India, 2012. [12]. Mr. Sachin Kumar [11311EN001+, “Performance Evaluation of SEIG Using Probabilistic Approach”, Department of Electrical Engineering (Specialization: Electrical Machines and Drives), Indian Institute of Technology, Banaras Hindu University, Varanasi, (U. P.), India, 2013. [13] Mr. Rudra Narayan [11316EN005+, “Generation System Reliability Evaluation Using Genetic Algorithm”, Department of Electrical Engineering (Systems Engineering), Indian Institute of Technology, Banaras Hindu University, Varanasi, (U. P.), India, 2013. [14]. Mr. Rohit Sharma [11316EN004+, “Effect of Active Route Time Out and Deletion Period on Different Routing Protocol of Mobile Ad-hoc network”, Department of Electrical Engineering (Systems Engineering), Indian Institute of Technology (Banaras Hindu University), Varanasi, (U. P.), India, 2013. [15] Mr. Rishikesh Choudhary [12304EN005], “Self Excitation Process and Capacitive VAR Requirement for SEIG driven by Wind Turbine”, Department of Electrical Engineering (Specialization: Electrical Machines and Drives), Indian Institute of Technology (Banaras Hindu University), Varanasi, (U. P.), India, 2014. [16] Mr. Manoj Yadav [12316EN006], “Performance Evaluation of IARP, IERP, AODV, DSR and DYMO Routing Protocols of Mobile Ad-hoc Networks”, Department of Electrical Engineering (Systems Engineering), Indian Institute of Technology (Banaras Hindu University), Varanasi, (U. P.), India, 2014. [17] Mr. Rupesh Kaushik [10304EN009], “Evaluation and Suggestions to Improve the Reliability of Induction Machine”, Department of Electrical Engineering (Control Systems), Indian Institute of Technology (Banaras Hindu University), Varanasi, (U. P.), India, 2014. [18] Mr. Luckey Chauksey [12304EN045], “Maximum Power Point Tracking in Photovoltaic System Using Fuzzy Control”, Department of Electrical Engineering (Control System), Indian Institute of Technology (Banaras Hindu University), Varanasi, (U. P.), India, 2014. [B] M. Tech. Dissertation in Progress: (Session: 2014 - 2015) [1] Mr. Anand [13082010], “Performance and Reliability Aspects of SEIG for WECs”, Department of Electrical Engineering (Specialization: Electrical Machines and Drives), Indian Institute of Technology (Banaras Hindu University), Varanasi, (Uttar Pradesh), India. In progress from July 2014. [2] Mr. Manoj Kumar [13082012], “Performance and Reliability Aspects of DFIG for WECs”, Department of Electrical Engineering (Specialization: Electrical Machines and Drives), Indian Institute of Technology (Banaras Hindu University), Varanasi, (U. P.), India. In progress from July 2014. [3] Mr. Alok Kumar Tiwari [13082034], “Comparative Evaluation of Maximum Power Point Tracking Methodologies in Photovoltaic System”, Department of Electrical Engineering (Control System), Indian Institute of Technology (Banaras Hindu University), Varanasi, (U. P.), India. In progress from July 2014. MEMBERSHIP OF THE PROFESSIONAL & RESEARCH BODIES Indian Society for Technical Education, New Delhi: Life Member Institution of Electrical and Electronics Engineers (USA) Institution of Engineering and Technology (UK) The Institution of Engineers (India): Fellow REVIEWER OF THE SCIENTIFIC ARTICLES AND RESEARCH PAPERS [1]. IET Electric Power Applications (UK) [2]. IET Renewable Power Generation (UK) [3]. International Journal of Modeling and Simulations (Canada) [4]. International Journal of Electric Power and Energy Systems (Canada) [5]. International Journal of Global Energy Issues (Inderscience Publishers) [6]. International Journal of Engineering (Iran) [7]. IEEE Transactions on Energy Conversion (USA) [8]. IEEE Transactions on Industrial Electronics (USA) [9]. Quality and Reliability Engineering International [10]. Engineering, Technology and Applied Sciences Research (Greece) [11] Renewable and Sustainable Energy Reviews, Science Direct [12] Reliability Engineering and System Safety, Science Direct EDITORIAL BOARD MEMBER OF PEER REVIEWED INTERNATIONAL JOURNALS [1] International Journal of Electrical, Robotics, Electronics and Communications Engineering (ISI Index), World Academy of Science, Engineering and Technology (UK). http://www.waset.org [2] INTERNATIONAL JOURNAL OF RESEARCH AND REVIEWS IN APPLIED SCIENCES (IJRRAS), Academic Research Publication Agency Press Journal, ISSN: 2076734X, EISSN: 2076-7366, Web Site: http://www.arpapress.com/ijrras [3] INTERNATIONAL JOURNAL OF RENEWABLE ENERGY TECHNOLOGY: Volume I (IJRET): Inderscience Publishers (UK), Publishers of Distinguished, Academic, Scientific and Professional Journals, Web Site: http://www.inderscience.com/ijret [4] ENGINEERING, TECHNOLOGY AND APPLIED SCIENCE RESEARCH (ETASR), GREECE, ISSN: 1792-8036, Web Site: http://www.etasr.com [5] INTERNATIONAL JOURNAL OF MANAGEMENT, MODERN SCIENCES AND TECHNOLOGIES, UAE, Web Site: http://www.ijmmst.org [6] INTERNATIONAL JOURNAL OF ELECTRICAL AND ELECTRONICS ENGINEERING, International Academy of Science, Engineering and Technology, ISSN (Print): 2278 - 9944; ISSN (Online): 2278-9952; Web Site: http://www.iaset.us ACADEMIC & FIELD EXPERIENCE [1] Lecturer (Electrical Engineering Department): Engineering College, Rewa (Madhya Pradesh), India Government [2] Safety Engineer: Electrical Safety & Safety Inspection Division, Electricity Board, Government of Madhya Pradesh, India [3] Assistant Lecturer (Electrical and Electronics Engineering Group): Birla Institute of Technology & Science, Pilani (Rajasthan), India [4] Assistant Professor (Electrical Engineering Department): Sam Higginbottom Institute of Agriculture, Technology & Sciences: Deemed University, Allahabad (Uttar Pradesh), India [5] Jr. Telecom Officer (BSNL): Bharat Sanchar Nigam Limited, Madhya Pradesh BSNL Zone Bhopal, Government of India [6] Lecturer (Electrical Engineering): University Institute of Technology, Rajiv Gandhi University of Technology, Bhopal (Madhya Pradesh), India COURSES TAUGHT B. Tech. Level [1]. Electrical Machines and Drives [2]. Control System Engineering [3]. Network analysis and Synthesis [4]. Power System Engineering [5]. Power Electronics and Drives [6]. Electrical Circuits and Systems M. Tech. / Ph. D. Level [1]. Power System Stability and Control [2]. Control System Design [3]. Power System Reliability [4]. Electrical Machines and Drives [5]. Reliability Engineering [6]. Systems Reliability HONORS & AWARDS [1]. Nehru Encouragement Award: Conferred by Madhya Pradesh State Government, Bhopal (Madhya Pradesh), India: January 26, 1989. [2]. Nehru Encouragement Award: Conferred by Madhya Pradesh State Government, Bhopal (Madhya Pradesh), India: January 26, 1991. [3]. Who’s Who in Science and Engineering: 2011-2012, 11th Edition, MARQUIS WHO’S WHO Since 1899 (USA), ISBN: 978-0-8379-5770-8, Release Date: December, 2010, Web-Site: http://www.marquiswhoswho.com References [1] Prof. (Dr.) L. D. Arya, Professor (Electrical Engineering Department), Sri G. S. Institute of Technology & Science, 23 Park Road, Indore (Madhya Pradesh) INDIA. Mobile: +91 9425955543, E-mail: [email protected] [2] Dr. R. C. Bansal, Department of Electrical, Electronics and Computer Engineering, Room: 14-27, Engineering Building: 01, University of Pretoria, Pretoria 002, South Africa. Tel: +27 (012) 4205446 (Office); +27 761088833 (Mobile), Fax: +27 (012) 362 5000. Email: [email protected]; [email protected], [email protected] [3] Prof. (Col.) Gurmit Singh, Professor (Computer & Electronics Engineering), Sam Higginbottom Institute of Agriculture, Technology & Sciences: Deemed University, Allahabad (Uttar Pradesh), India. Email: [email protected], Mobile: +91 9918388733 [4] Dr. Ahmed F. Zobaa, School of Engineering and Design, Brunel University, Uxbridge, UB8 3PH, Middlesex, United Kingdom. D/L: +44 (0) 1895 2 65335, Fax: + 44 (0) 1895 2 69782, M/P: +44 (0) 7823883680. Email: [email protected] [5] Dr. Z. Y. Dong, Australian grid Chair & Director, Centre for Intelligent Electricity Networks, Newcastle Institute of Energy and Resources, The University of Newcastle Callaghan, NSW 2308 Australia. Tel +61 2 4033 9180, Fax +61 2 4033 9042 (Centre), Mobile: +61 419 158 799 Email: [email protected] [6] Dr. Saeid Eslamian, Department of Water Engineering, College of Agriculture Engineering, Isfahan University of Technology, Isfahan, Iran. Editor-inChief, International Journal of Hydrology Science & Technology, Inderscience Publishers (UK). E-mail: [email protected] [7] Prof. (Dr.) Almoataz Youssef Abdelaziz, Electrical Power and Machines Department, Faculty of Engineering, Ain Shams University, Abbassia-11517, Cairo, Egypt. Senior Editor, Ain Shams Engineering Journal (Elsevier). Mobile: +20-100-1372930. E-mail: [email protected] April 14, 2015 (R. K. Saket)
© Copyright 2024