1. No category

サイズ：420×H297mm
USA) 3 Tier Pet Play Cage PEC-903 Instructions [Reverse]
材質：コート紙79.1g/㎡
3 Tier Pet Play Cage
Assembly
Put all pieces on a flat surface (cover surface
with a sheet or something similar to protect
your floor from getting scratched by the pieces).
Make sure all pieces are included.
1
Insert casters and buckles into the bottom tray as shown.
2
Place first story panels into the bottom tray and secure in
place with the buckles.
IMPORTANT: Please read these instructions
prior to assembly of the product.
A
FIRST STORY PANEL
How to use clip connectors.
BUCKLE x 4
Taking the clip
connectors
off of the cage:
Putting the clip
connectors
onto the cage:
5
BOTTOM TRAY x 1
Assembling the top panel.
Place corner connectors on each corner of the third
story. Story uses a total of 8 clip connectors as
shown.
INSERT BUCKLE
AS SHOWN
TOP PANEL
PULL
CORNER
CONNECTOR
x4
WIRE
CLIP CONNECTOR
x8
Place clip connector
into wire as shown.
HOLD
WIRE
Push clip as shown
to lock into place.
Hold upper clip connector
with finger and pull lower
connector as shown.
CASTERS x 7
How to use the buckles
Push buckle up & hook
the lip of the buckle
onto the wire panel.
Make sure all clip connectors
are firmly in place to protect
yourself or pet from injury.
B
3
How to use the door pin-lock.
Insert pin-lock into pin
holder to lock the door.
Assembling first and second story.
First assemble second story - See “C”. Then place corner connectors on
each corner of the first story. Place second story of the cage onto the
first story of the cage, using the corner connectors. Use clip connectors
to secure the two stories. (Use a total of 8 connectors as shown).
PIN-LOCK
4
Assemble second and third story.
Place third story of the cage onto the second story of the cage, using
the corner connectors to hold in place. Use clip connectors (total of 8)
to secure the two stories.
THIRD STORY
FRONT
SECOND STORY
WIRE PLATFORM
PLATFORM TRAY
CORNER CONNECTOR x 4
WIRE PLATFORM
PLATFORM TRAY
C
x4
CLIP CONNECTOR x 8
CORNER CONNECTOR x 4
How to set up the pet platform.
Assemble the tray and platform to the second
story panel prior to attaching second story
panel to the first story panel. Place the wire
tray shelf to the right side of the second story
cage and secure with clip connectors to the
front and back. Place platform tray on top of
the wire tray shelf.
TOP
x4
CLIP CONNECTOR x 8
x2
x2
x4
PLATFORM TRAY
FRONT
x2
x2
BOTTOM
FRONT
CLIP CONNECTOR
Use the
pin-lock
holder when
you want to
prop the
door open.
WIRE PLATFORM
SHELF
FRONT
STOPPER FOR
CASTERS x 2
WARNING
Please use caster
stoppers (feet) on the
two front casters when
you find the place you
would like the cage to
stay put. This will keep
the cage from rolling.