1. No category

Cove Heater KCV Series
KCV
A
12
B
10
C
A: Series
B: 12 - 120V 20 - 208V
24 - 240V
C: Watts (02=250 - 15=1500)
Radiant & Convection Heat
Long Life Elements
Quiet Running
Junction box at each end
Extruded aluminum front panel
Powder coated high temp. finish
Easy surface-mount installation
Wall thermostat recommended
Ribbed front for maximum surface radiation
Open-back design for maximum convection
7/8” diameter knockouts for 1/2” conduit
Standard color: almond (white optional)
2-year limited warranty
The KCV Series Cove Heater
The KCV cove heater is a radiant heater that also produces convection heat by heating the air similar to a baseboard. By combining the
quick comfort of radiant heat along with the sustained warmth of convection heat, warm air is uniformly dispersed throughout the room.
The cove heater is mounted near the ceiling, eliminating furniture placement problems. Surface temperatures are lower than baseboard
or fan heaters, making a pleasant form of heat similar to older ceiling cable heating systems. With no moving parts this heater is quiet and
maintenance free. Typical uses are day care centers, assisted living housing, housing developments, laundry rooms, bathrooms, bedrooms.
Ordering Information
120V
208V
240V
MODEL
KCV1202
KCV1204
KCV1206
KCV1207
KCV1210
KCV2004
KCV2006
KCV2007
KCV2009
KCV2010
KCV2012
KCV2015
KCV2404
KCV2406
KCV2407
KCV2409
KCV2410
KCV2412
KCV2415
*Add suffix -BW for optional bright white color
UPC
11801
11800
11803
11806
11812
11816
11817
11819
11820
11821
11822
11823
11824
11827
11830
11833
11836
11839
11842
VOLTS
120
120
120
120
120
208
208
208
208
208
208
208
240
240
240
240
240
240
240
WATTS
250
450
600
750
1050
450
600
750
900
1050
1200
1500
450
600
750
900
1050
1200
1500
AMPS
2.1
3.8
5.0
6.3
8.8
2.2
2.9
3.6
4.3
5.0
5.8
7.2
1.9
2.5
3.2
3.8
4.4
5.0
6.3
LENGTH
24”
34”
47”
59”
83”
34”
47”
59”
71”
83”
94”
118”
34”
47”
59”
71”
83”
94”
118”
SHIP WEIGHT lbs
5.5
7
9.5
11
15.5
7
9.5
11
13
15.5
17
26
7
9.5
11
13
15.5
17
26
Engineering Specifications
Construction:
Constructed of extruded aluminum with a maximum cross section
thickness of .962”.
With sawtooth profile to increase radiating surface area.
Open on top and bottom for maximum convection heating room air.
With 32 cubic inch junction box at both ends, furnished with 7/8”
knockouts on back and top to facilitate 1/2” conduit.
Ni-CChrome wire embedded in Magnesium Oxide powder enclosed
and sealed in aluminum sheath.
Element wattage density of approximately 150 watts per lineal foot.
With full length back case constructed of 22 gauge electrogalvanized
steel with baked enamel finish.
Two year limited warranty.
Ratings and Approvals:
The heaters shall be available in ratings from 250 - 1500 watts
at 120 and 208/240 Volts.
UL (E41422), ETL (473-2735)
Cove Heater KCV Series
Dimensional Data
Top View
Locate Studes in Wall &
Drill 3/16” holes and secure
heater to wall with screws
24” to 118”
3 1/8”
7/8” knock-out for ½” conduit
4”
Back View
MINIMUM CLEARANCE
Heaters are not to be mounted
closer than 2½” from drywall
ceiling or 6” from vinyl or drop
ceiling. Heaters to be mounted
at least 6 feet from floor.
3 1/8”
7/8” knock-out for ½” conduit
Screw with bonding washer
Accessories
MODEL
KCVT-1R
KCVT-1L
KCVT-2R
KCVT-2L
DESCRIPTION
Single Pole Right side wiring
Single Pole left side wiring
Double Pole Right side wiring
Double Pole Left side wiring
WEIGHT lbs
.25
.25
.25
.25
AIRFLOW
Wall
Warm Air
Radiant: Heat produced is emitted as
radiant infrared invisible rays
Convection: Heat produced is also
transmitted by natural convection from
the top of the heater
Radiant Panel
Heated
Air
KCVT-1
Cold Air