p nG rou aa fM ra ab www.maanplasmatreatment.nl Maan Plasma Treatment Activation - Cleaning - Coating Activation, cleaning and coating of your products by means of plasma - inline and under atmospheric pressure - without damaging your materials. This means hard to adhere materials are among the possibilities. That is the core of Maan Plasma Treatment. The system’s flexibility makes it applicable in roll-to-roll, flat sheets and 3D contour designs. This offers new opportunities - Maan Plasma Treatment is the future. nd o Maan Plasma Treatment Activation - Cleaning - Coating Maan Plasma Treatment can be used effectively for the following 3 processes: Activation Plasma can be used to activate materials, increasing their adhesive properties. Plasma speeds up the atoms, which subsequently collide with the substrate. This will attach atoms to the surface after which they serve as anchoring points. In a lot of cases this increases polarity, as a result of which the surface becomes more hydrophilic. Cleaning With Maan Plasma Treatment, surfaces are cleaned at molecular level by using Argon (Ar) for instance. Particles in the plasma reach extremely high speeds and enter the surface at that speed. This creates a collision, blasting contamination off the surface. Coating By adding a monomer to the plasma, it is possible to obtain a polymerisation (a chain of monomers). This makes it possible to apply glass-like coatings with hydrophobic or hydrophilic properties. Subject to technical modifications © Maan Group Maan Plasma Treatment Unique Selling Points Maan Plasma Treatment increases the possibilities in the field of product assembly and design. Maan Plasma Treatment increases your choice in terms of the materials to be used. The system can also increase your process stability and quality. Maan Plasma does this by means of: 1 2 3 Improved adhesion Activating materials through Maan Plasma Treatment anchors the connection between material and adhesive. With plasma, no-glueable surfaces are belong to the past. In addition, the Maan Plasma Treatment cleaning process can improve the adhesive connection and increase its reliability. Improved printability Surface tension of the surface to be printed changes by activation with Maan Plasma Treatment. The ink flows differently, thereby realising an improved printed image. In addition, this activation allows the ink to anchor itself with the surface to be printed. This technique increases the choice of printable materials. Hydrophobic Surface tension can be influenced by coating surfaces with Maan Plasma Treatment. This technique can make material hydrophobic. This process can also be reversed, giving materials hydrophilic properties. www.maanplasmatreatment.nl Maan Plasma Treatment Configurations Roll-to-roll 3D Contours Flat sheets www.maanplasmatreatment.nl Is Maan Plasma Treatment for you? Maan Plasma Treatment is the future, we are convinced of that! Are you convinced too? Maybe you have a specific question? Please come and visit us in Raalte. We continue to develop our product in order to achieve maximum return with Maan Plasma Treatment. We look forward to collaborating with you as end user, to achieve more with Maan Plasma Treatment. Can you recognise the opportunities? Contact us. Subject to technical modifications © Maan Group Maan Plasma Treatment Maan Group T +31 (0)572 35 53 33 is a brand of Maan Group Klipperweg 16 F +31 (0)572 36 44 98 8102 HR Raalte [email protected] www.maangroup.nl
© Copyright 2024