SquareLED Modular Series 100W Single RGBW 100W LED, 45°, Schutzklasse IP-65, Gehäusefarbe schwarz Code 18379
SquareLED Modular Series 100W Single RGBW 100W LED, 45°, Schutzklasse IP-65, Gehäusefarbe silber Code 18380
Bedienungsanleitung: SquareLED Modular Series 100W Single RGBW
Manual | Modular Series 100W Single RGBW
Zusammenfassung
We do thank you for purchasing LED stage lights from us. Please keep this manual for further reference and
operate the lights according to the manual. Any damage caused by improper use will not be assumed by the
manufacturer.
1. Packing list:
1 unit of light
1 pc of power line and 1 pc of signal line
A Manual
2.1. Product Discription:
The 100W single RGBW version in the square case is being considered by its protection class IP65 for
uesing primarily in outdoor areas. In designing your architecture lighting, you are now completely free.
» Used either as a single module, assembled as a high prower BAR or as a large floodlight- now you
are able to cover with a single device all applications. The units can be connected by a simple module
connector in each direction- no limit for the quantity of devices. Due to the passive convection cooling,
the device can also be used on events where any LED PAR with fan noise cannot be used.
• LED source 1*100w RGBW 4 in 1 lattice LED;
• Water proof : IP65 - 100% waerproof
• Function: can be connected by a simple module connector in each direction for a flood lighting
• Cooling system: Natural cooling
2.2. Product Introduction:
• Employed with high brightness 100W RGBW LED;
• Aluminum housing plus PMMA cover;
• Aluminum housing and stand are anodized;
• Provided free adjustability of illumination angle by aluminum stand;
• Built-in optical lens effectively enhance the illumination distance;
• Built-in AC to DC transformer make it simple for installation;
• Application for landscape lighting for stage, hostoric building, courtyard, etc.
Manual | Modular Series 100W Single RGBW
3.1. Operation instructions:
»» When you received the lights, please unpack the carton, check the lights and make sure there is no
damage caused by transportation, for example loosing of screws, breakness of lenses, etc.
»» Before running the light, please check whether the device is well installed or not, and whether the power
supplied matches with the device or not.
»» Due to the top level protection requirements on the light, please make sure the ground wire is grouded,
»» Lighting operation must be carried out by qualified personnel.
3.2. Technical Parameter:
DMX Kanalbelegung (4CH)
Power
LED Chip
Channels
Beam
Angle
IP Grade
Weight
Dimension
100W
RGBW
6
45°
IP65
4.0KG
L230 x W155 x H155mm
Input Voltage
Material
AC100V~240V
AL 6063
4.1. Diagram:
Working Temp Control signal
50°C - 60°C
DMX512
Control Mode
Warranty
Self-propelled, DMX-512, Master-stave
2 Years
Manual | Modular Series 100W Single RGBW
4.2 Menu setup:
Connected to the power supply to start the light, press <Menu> into the settings screen.for a start.
Press <Menu> again to the next function, Press <Up/Down> to the next submenu or increase/
decrease the parameter. Press <Enter> to confirm.
Operations as fellows:
Manual | Modular Series 100W Single RGBW
NO.
English Display
Function description
1
Test
A function key to enter the menu to select other key is invalid.
2
D001-D512
3
R001-R255
4
G001-R255
5
B001-B255
6
W001-255
7
PR01-PR11
8
SP01-SP16
9
Test
Press the up and down keys to adjust the DMX512 address,
press the Enter button to save.
Press the up and down keys to adjust the red brightness (0-255),
and press the Enter button to save.
Press the up and down keys to adjust the green brightness (0-255),
and press the Enter button to save.
Press the up and down keys to adjust the blue brightness (0-255),
and press the Enter button to save.
Press the up and down keys to adjust the white brightness (0-255),
and press the Enter button to save.
Press the arrow keys to select the built-in program (00-26),
and press the Enter button to save.
Press the arrow keys to select the built-in program speed,
press the Enter button to save.
A function key to enter the menu to select other key is invalid
NO.
Function
Function description
1CH
Total Dimming
A function key to enter the menu to select other key is invalid
2CH
Total Stroboscopic
3CH
R Dimming
4CH
G Dimming
5CH
B Dimming
6CH
W Dimming
Press the up and down keys to adjust the DMX512 address,
press the Enter button to save
Press the up and down keys to adjust the red brightness (0-255),
and press the Enter button to save.
Press the up and down keys to adjust the green brightness (0-255),
and press the Enter button to save.
Press the up and down keys to adjust the blue brightness (0-255),
and press the Enter button to save.
Press the up and down keys to adjust the white brightness (0-255),
and press the Enter button to save.
Manual | Modular Series 100W Single RGBW
5. Safety Notes:
• Please disconnect the power before maintenance or installation of the light.
• Please make sure that the environment around is well ventilated.
• Please be familiar with the light performance before operation as a qulified personal.
• Please do‘nt run the light in the power voltage with different standard.
• Avoid direct looking at the light in a long time, the light is harmful to our eyes.
• Please don‘t running the light in a shaking environment.
Das Lichttechnikhaus Vertriebs GmbH
Rudolf-Diesel-Str. 3, D-89312 Günzburg
Telefon
+49 (0) 82 21 207 98-0
Fax
+49 (0) 82 21 207 98-69
E-Mail
[email protected]
Web www.lth-gmbh.de