BIOWAXER www.maf-roda.com Non contractual document BIOWAXER * e purpose of this system is the application of XEDASOL L wax on apples. Process description: Application of the wax using : - 5 rows of animal hair brushes. - One roller conveyor for drying. Covering with this natural wax is carried out by means of 14 stainless steel nozzles, each one controlled by a temporized solenoid valve and supplied by a dosing pump. Drying is carried out by a cold air ﬂow passing through the rollers and the fruit. e air is extracted by the fan located on the top of the machine (Chimney for evacuation of steam is not included in the scope of our supply). is system is equipped with: 1 Progressor allowing the evacuation of the fruit from the brusher. 1 Water cleaning system for the brushes and the 14 nozzles. For optimal functioning, it is necessary to avoid any condensation on the apples, by heating them beyond the “dew-point”: Heat the immersion water to 40° C by means of a hot water generator or use a hot air generator on the brusher. ADVANTAGES •Remarkable visual appearance with an intense shine and brilliance. •Long-term preservation characteristics of the fruit. •Bacterial disinfection of the surface of the skin. •Drastic reduction in long term moisture loss. •Clean presentation with a homogeneous covering. FEATURES width:30’’/40’’/49’’/59’’ Length: 236’’/ 315’’ XEDASOL L wax Consumption: Between4and 5 Litres / Ton SPECIFICATIONS · Chassis : InoxAISI 304 · Electrical power: 7 kW 3P+N+Earth · Speciﬁcations : Non ATEX Machine · Machine in accordance with the EC standards USA: MAF Industries INC 36470 Highway 99 -P.O.Box 218 Traver ,CA 93673 Te l : ( 1 ) 5 5 9 8 9 7 2 9 0 5 Fax:( 1 ) 5 5 9 8 9 7 3 4 2 2 e-mail:sal es@mafin dustries.c om