1. No category

VIPER ALPR All-in-One Solutions – Quick Start Guide
❶






What’s in the Box
❹
Viper ALPR Camera System
Accessories Plastic Bag
Sunshield Cover
Camera Mounting Bracket
Installation CD
This Quick Start Guide








❷

Required Equipment (not in this box)
o Windows PC with an Ethernet Port
o RJ45 network cable and PoE switch

Default network settings
o IP address: 192.168.0.10
o Subnet mask: 255.255.255.0

❸



Other Items
Configuration & Setup
Unlock the latches to open housing
Attached the sunshield using the
provided hardware
Connect the network cable from the
PoE Switch to the ETH port on the back of the Pegasus-T unit
Confirm the camera and the processing unit are powered ON
Configure the PC’s local network settings according to the default
network settings specified herein and confirm you can ping the
Viper unit
Install the CDF-Lite software (Provided in the CD)
Consult the CDF-Lite Quick Reference Guide to complete the
software configuration process
Consult the Viper ALPR Camera
Aiming Guide for best deployment
Note: Adjustment of the Varifocal lens is
necessary to achieve optimal performance
❺

Optional Connections
Connect 24VAC power to the
Heater-Blower unit (when applicable)
Optional Equipment (not included)
o PoE Injector
o 24VAC Power Adaptor (Consult with Mango DSP Sales)
Getting Started
Remove all items from the box and confirm that all parts are included.
If anything is missing or broken, please inform your Mango DSP Sales
Representative immediately.
Save all packaging to use for shipping or transporting the unit in the
future.
Doc. Part No. 813-0002-001
Doc. Rev. A1
2014
24VAC
❻
Final Results

Your new Viper ALPR All-in-One Camera System should be up and
running: License plates are detected accurately - Great Job!

If you have followed our guides and the unit fails to work, or you
have repowered your unit and it still fails to operate properly,
please contact Mango DSP Support Team.
Contact Information:
www.mangodsp.com
[email protected]
[email protected]