WATER MANAGEMENT SOLUTIONS CleanWave® Mini – Water Treatment Service Electrocoagulation Technology for Water Recycling Halliburton’s mobile CleanWave® system uses an electrical process that has the capacity to destabilize and coagulate suspended colloidal matter in water. When contaminated water passes through the electrocoagulation cells, the anodic process releases positively charged ions which bind onto the negatively charged colloidal particles in water resulting in coagulation. At the same time, gas bubbles, produced at the cathode, attach to the coagulated matter causing it to float to the surface where it is removed by a surface skimmer. Heavier coagulants sink to the bottom leaving clear water, suitable for use in drilling and production operations. Smaller Footprint Mobile Treatment With Independent Utility Halliburton’s mobile CleanWave system provides an all-inclusive water treatment system in two modified shipping containers. One unit is dedicated to water treatment. Emulsified waste water is pumped through the low pressure electrocoagulation treatment cells and passed into any number of optional external coagulation chambers. During this stage the agglomerated solids rise to the top and are separated by a mechanical skimmer. Heavier solids sink to the bottom for later removal. Chemical injection accelerates the coagulation process and adjusts the water pH to within a programmable range. After the settling stage, the water passes through a media filtration stage to remove any remaining suspended solids. The system constantly monitors water quality and pH characteristics. Water quality data is stored for record keeping and analysis. A monitoring system uses a cellular connection to notify operators of problems or errors with email alerts. The accessory unit contains a 400 V, 50 Hz, Hz, 230, a three-phase diesel generator capable of supplying all necessary system power as well as power to additional equipment, such as a dissolved air flotation (DAF) unit. The entire accessory unit, including the system supply pumps, can operate independently of the water treatment stage for additional utility. Performance Specifications Parameter Removal Total Petroleum Hydrocarbon (TPH) 95-99% Total Suspended Solids (TSS) 95-99% Total Iron and Heavy Metals 95-99% Equipment General Specifications Power Supply 200 kVA / 400 V / 50 Hz / 230 A Throughput 6 BPM / 57 m3/hr / 960 L/m Dimensions Two Conex Containers Measuring (LxWxH) 12.2 m x 2.4 m x 2.6 m (40 ft x 8 ft x 8.5 ft) The above graphic represents the smaller version of the CleanWave system. Key Features • 95-99% reduction in total suspended solids (TSS), total petroleum hydrocarbon (TPH), and heavy metals • Treats water with TDS ranging from 100 – 300,000 mg/L • Coagulates particles < 1 micron • Reduces turbidity to < 10 NTU • Average sludge generation < 5% • Breaks emulsions WATER MANAGEMENT SOLUTIONS For more information about how CleanWave® Mobile Water Treatment System can help improve your environmental footprint, contact your local Halliburton representative or email [email protected]. © 2013 Halliburton. All rights reserved. Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale. H010503 4/14 www.halliburton.com/multichem