SECTION 10520 FIRE PROTECTION SPECIALTIES PART 1
SECTION 10520 FIRE PROTECTION SPECIALTIES PART 1 - GENERAL 1.1 A. SUMMARY This Section includes the following: 1. 2. 3. 1.2 A. Portable fire extinguishers. Cabinet mounted fire extinguishers. Mounting brackets for fire extinguishers. SUBMITTALS Product Data: For each type of product indicated. 1. 2. 3. Fire Extinguishers: Include rating and classification. Fire-Protection Cabinets: Include door hardware, cabinet type, trim style, panel style, and details of installation. Show location of knockouts for hose valves. B. Samples: For each exposed cabinet finish. C. Maintenance data. 1.3 QUALITY ASSURANCE A. NFPA Compliance: Fabricate and label fire extinguishers to comply with NFPA 10, "Portable Fire Extinguishers." B. Fire Extinguishers: Listed and labeled for type, rating, and classification by an independent testing agency acceptable to authorities having jurisdiction. C. Fire-Rated Fire-Protection Cabinets: Listed and labeled to comply with requirements of ASTM E 814 for fire-resistance rating of walls where they are installed. 1.4 COORDINATION A. Coordinate size of fire-protection cabinets to ensure that type and capacity of fire extinguishers indicated are accommodated. B. Apply decals on field-painted fire-protection cabinets after painting is complete. Value Place Hotel, Humble, TX BRR No. 31000019 March 18, 2015 FIRE PROTECTION SPECIALTIES 10520 - 1 1.5 A. WARRANTY Special Warranty: Manufacturer's standard form in which manufacturer agrees to repair or replace components of portable fire extinguishers that fail in materials or workmanship within specified warranty period. 1. Failures include, but are not limited to, the following: a. b. 2. Failure of hydrostatic test according to NFPA 10. Faulty operation of valves or release levers. Warranty Period: Six years from date of Substantial Completion. PART 2 - PRODUCTS 2.1 A. MANUFACTURERS In other Part 2 articles where titles below introduce lists, the following requirements apply to product selection: 1. 2.2 A. PORTABLE FIRE EXTINGUISHERS Available Manufacturers: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. B. Basis-of-Design Product: The design for each product is based on the product named. Subject to compliance with requirements, provide either the named product or a comparable product by one of the other manufacturers specified. Amerex Corporation. Ansul Incorporated. Badger Fire Protection. Buckeye Fire Equipment Company. Fire End & Croker Corporation. General Fire Extinguisher Corporation. JL Industries, Inc. Kidde Fyrnetics. Larsen's Manufacturing Company. Modern Metal Products; Div. of Technico. Moon American. Potter Roemer; Div. of Smith Industries, Inc. Watrous; Div. of American Specialties, Inc. General: Provide fire extinguishers of type, size, and capacity for each fire-protection cabinet and mounting bracket indicated. 1. Instruction Labels: Include pictorial marking system complying with NFPA 10, Appendix B. Value Place Hotel, Humble, TX BRR No. 31000019 March 18, 2015 FIRE PROTECTION SPECIALTIES 10520 - 2 C. 2.3 Multipurpose Dry-Chemical Type in Steel Container: UL-rated -A:B:C, 10-lb nominal capacity, with monoammonium phosphate-based dry chemical in enameled-steel container. FIRE-PROTECTION CABINET A. Basis-of-Design Product: J.L Industries (Model #1827FX) or a comparable product by one of the following: B. Available Manufacturers: 1. 2. 3. 4. 5. 6. 7. 8. 9. Fire End & Croker Corporation. General Accessory Mfg. Co. JL Industries, Inc. Kidde Fyrnetics. Larsen's Manufacturing Company. Modern Metal Products; Div. of Technico. Moon American. Potter Roemer; Div. of Smith Industries, Inc. Watrous; Div. of American Specialties, Inc. C. Cabinet Type: Suitable for fire extinguisher. D. Cabinet Construction: Nonrated. E. Cabinet Material: Enameled-steel or Aluminum or Stainless-steel sheet. F. Semirecessed Cabinet: Cabinet box partially recessed in walls of shallow depth to suit style of trim indicated; with one-piece combination trim and perimeter door frame overlapping surrounding wall surface with exposed trim face and wall return at outer edge (backbend). 1. Trim: One-piece combination trim and perimeter door frame overlapping surrounding wall surface, rounded edge trim with 2-1/2” backband. G. Cabinet Trim Material: Aluminum sheet. H. Door Material: Aluminum sheet. I. Door Style: Double strength full glass. J. Door Glazing: Tempered float glass (clear) Tempered float glass. K. Door Hardware: Manufacturer's standard door-operating hardware of proper type for cabinet type, trim style, and door material and style indicated. L. Accessories: 1. Mounting Bracket: Manufacturer's standard steel, designed to secure fire extinguisher to fire-protection cabinet, with plated or baked-enamel finish. Value Place Hotel, Humble, TX BRR No. 31000019 March 18, 2015 FIRE PROTECTION SPECIALTIES 10520 - 3 M. Finishes: 1. 2.4 A. MOUNTING BRACKETS Available Manufacturers: 1. 2. 3. 4. 5. 6. 7. 8. 9. B. Amerex Corporation. Ansul Incorporated. Badger Fire Protection. Buckeye Fire Equipment Company. Fire End & Croker Corporation. General Fire Extinguisher Corporation. JL Industries, Inc. Larsen's Manufacturing Company. Potter Roemer; Div. of Smith Industries, Inc. Mounting Brackets: Manufacturer's standard galvanized steel, designed to secure fire extinguisher to wall or structure, of sizes required for types and capacities of fire extinguishers indicated, with plated or baked-enamel finish. 1. C. Aluminum: Class I, clear anodic coating complying with AAMA 611. Color: Red. Identification: Lettering complying with authorities having jurisdiction for letter style, size, spacing, and location. Locate as indicated by Architect. 1. Identify bracket-mounted fire extinguishers with the words "FIRE EXTINGUISHER" in red letter decals applied to mounting surface. a. 2.5 A. FABRICATION Fire-Protection Cabinets: Provide manufacturer's standard box (tub), with trim, frame, door, and hardware to suit cabinet type, trim style, and door style indicated. Weld joints and grind smooth. 1. B. Orientation: Vertical. Construct fire-rated cabinets with double walls fabricated from 0.0428inch- thick, cold-rolled steel sheet lined with minimum 5/8-inch- thick, firebarrier material. Provide factory-drilled mounting holes. Cabinet Doors: Fabricate doors according to manufacturer's standards, from materials indicated and coordinated with cabinet types and trim styles selected. 1. 2. Fabricate door frames with tubular stiles and rails and hollow-metal design, minimum 1/2 inch thick. Miter and weld perimeter door frames. Value Place Hotel, Humble, TX BRR No. 31000019 March 18, 2015 FIRE PROTECTION SPECIALTIES 10520 - 4 C. Cabinet Trim: Fabricate cabinet trim in one piece with corners mitered, welded, and ground smooth. PART 3 - EXECUTION 3.1 INSTALLATION A. Examine walls and partitions for suitable framing depth and blocking where semi recessed cabinets will be installed. B. Examine fire extinguishers for proper charging and tagging. Remove and replace damaged, defective, or undercharged units. C. Prepare recesses for semi recessed fire-protection cabinets as required by type and size of cabinet and trim style. D. Install fire-protection specialties in locations and at mounting heights indicated or, if not indicated, at heights acceptable to authorities having jurisdiction. E. Fire-Protection Cabinets: Fasten fire-protection cabinets to structure, square and plumb. 1. 2. 3. Unless otherwise indicated, provide recessed fire-protection cabinets. If wall thickness is not adequate for recessed cabinets, provide semi recessed fire-protection cabinets. Provide inside latch and lock for break-glass panels. Fasten mounting brackets to inside surface of fire-protection cabinets, square and plumb. F. Mounting Brackets: Fasten mounting brackets to surfaces, square and plumb, at locations indicated. G. Identification: Apply decals at locations indicated. H. Adjust fire-protection cabinet doors to operate easily without binding. Verify that integral locking devices operate properly. I. Replace fire-protection cabinets that have been damaged or have deteriorated beyond successful repair. END OF SECTION Value Place Hotel, Humble, TX BRR No. 31000019 March 18, 2015 FIRE PROTECTION SPECIALTIES 10520 - 5 SECTION 10801 TOILET AND BATH ACCESSORIES PART 1 - GENERAL 1.1 A. SUMMARY This Section includes the following: 1. 2. 3. 4. 1.2 Public-use washroom accessories. Private-use bathroom accessories. Underlavatory guards. Custodial accessories. SUBMITTALS A. Product Data: For each type of product indicated. B. Product Schedule: 1. Identify locations using room designations indicated on Drawings. 2. Identify products using designations indicated on Drawings. PART 2 - PRODUCTS 2.1 SCHEDULE OF ACCESSORIES A. See Suggested Vendors List in Division 01100, Interior Materials Lists on Drawings, and Basis of Design items at the end of this Section. B. Available Manufacturers: Subject to compliance with requirements, manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following: 1. 2. 3. 4. 2.2 A. American Specialties, Inc. Bobrick Washroom Equipment, Inc. Bradley Corporation. General Accessory Manufacturing Co. (GAMCO). UNDERLAVATORY GUARDS Available Manufacturers: Subject to compliance with requirements, manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following: Value Place Hotel, Humble, TX BRR No. 31000019 March 18, 2015 TOILET AND BATH ACCESSORIES 10801 - 1 1. Plumberex Specialty Products, Inc. 2. TCI Products. 3. Truebro, Inc. B. Underlavatory Guard: 1. Description: Insulating pipe covering for supply and drain piping assemblies that prevent direct contact with and burns from piping, and allow service access without removing coverings. 2. Material and Finish: Antimicrobial, molded-plastic, white. 2.3 A. CUSTODIAL ACCESSORIES Available Manufacturers: Subject to compliance with requirements, manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following: 1. 2. 3. 4. 5. 2.4 A. A & J Washroom Accessories, Inc. American Specialties, Inc. Bobrick Washroom Equipment, Inc. Bradley Corporation. General Accessory Manufacturing Co. (GAMCO). FABRICATION Keys: Provide universal keys for internal access to accessories for servicing and resupplying. Provide minimum of six keys to Owner's representative. PART 3 - EXECUTION 3.1 A. INSTALLATION Install accessories according to manufacturers' written instructions, using fasteners appropriate to substrate indicated and recommended by unit manufacturer. Install units level, plumb, and firmly anchored in locations and at heights indicated. Value Place Hotel, Humble, TX BRR No. 31000019 March 18, 2015 TOILET AND BATH ACCESSORIES 10801 - 2 BASIS OF DESIGN - Toilet and Bath Accessories TA-6 TA-6A TA-7A TA-7B TA-8 TA-9 TA-10 TA-10A TA-11 TA-12 TA-13 24" Grab Bar 12" Grab Bar 36" Grab Bar 18" & 42" Grab Bar L-Shaped Grab Bar Folding Shower Seat 30x36 Channel Frame Mirror 24x36 Channel Frame Mirror Removable Shower Seat Paper Towel Dispenser Double Towel Hook Bradley Bradley Bradley Bradley Bradley Bradley 8120-001240 8120-001120 8120-001360 8120-001420 8120-0591836 9569-000000 Franklin Brass DF596 Ref Drawings Ref Drawings Taymor - Sunglow Col. 01-9402 END OF SECTION Value Place Hotel, Humble, TX BRR No. 31000019 March 18, 2015 TOILET AND BATH ACCESSORIES 10801 - 3
© Copyright 2024