1. business and industrial
2. chemicals industry
3. adhesives

Henkel Industrial Solutions
Selector Guide
Adhesives, Sealants, Metal Pretreatments,
Coatings, Cleaners and Metalworking Fluids
Introduction
to Henkel’s
Industrial Solutions
A t Henkel Corporation, we provide solutions to industry’s biggest
challenges. We are dedicated to understanding the markets we serve
and developing partnerships that stand the test of time.
B ut just how well do you know Henkel? Our customers have long
recognized us as the leader in surface treatment, sealant, adhesive
and metalworking lubricant technologies. You should also know that
we now offer:
• Products that manage the stress and strain energies of an assembly,
allowing it to flex, reduce fatigue and absorb shock without damage.
• Products that manage noise, vibration and harshness, reducing
airborne and structure-borne noises.
• Products that manage the intrusion of air, water, fuel and other
elements into assemblies.
• Products that manage the structural vibration that travels through
assemblies and is felt by occupants.
• Custom-engineered parts and components specifically designed for
your application.
• Reliable, environmentally responsible and increasingly green products.
• Fully integrated equipment systems from standard shelf items to full
turnkey systems.
N ot every company can accommodate the technical staff and
equipment necessary to compete in today’s challenging manufacturing
environment. Our chemists and engineers work in partnership with
customers to improve design, assembly, productivity and profitability.
Whether a customer needs competent recommendations on
chemical properties or a full-blown turnkey process design, Henkel
provides solutions.
T his selector will aid you in choosing the right solution and product
for a wide range of common industrial challenges. For additional
information on Henkel products, please contact us at (800) 521-1355.
Table of Contents
Henkel Brands........................................ 2-3
Markets
Agriculture/Construction......................... 4-5
Appliance............................................... 6-7
Filter....................................................... 8-9
HVAC/Insulation.................................. 10-11
Medical Devices & Equipment............. 12-13
Outdoor Power Equipment.................. 14-15
Pump & Compressor........................... 16-17
Recreational Vehicle............................ 18-19
Smart Cards....................................... 20-21
Solar Energy....................................... 22-23
Specialty Vehicle................................. 24-25
Wind Energy....................................... 26-27
Products
Surface Preparation, Cleaning &
Conversion Coating............................. 28-35
Autodeposition Coatings..................... 36-39
Chemical Specialties........................... 40-41
Metalworking Fluids........................... 42-47
Hot Melt Adhesive Bonding................. 48-53
Structural Bonding.............................. 54-59
Elastomeric Bonding & Sealing........... 60-61
Potting, Molding & Encapsulating........ 62-65
Seam Sealing..................................... 66-67
Energy, NVH & Fluid Management....... 68-69
Water-Based Adhesives...................... 70-75
Integrated Equipment Solutions.......... 76-77
Product Listing and Index
Additional Supporting Products........... 78-79
Index.................................................. 80-81
Henkel is a leader with brands and
technologies that make people’s lives
easier, better and more beautiful.
With superior brands and the technologies
they represent, our innovations continue
to help shape the future of the industrial
manufacturing market.
B
eginning in the 1940’s, Adhesin® branded adhesives have represented a full
range of water-based adhesives for various market segments and applications
in the packaging industry. Adhesin® adhesives include homopolymers and
copolymers dispersions and natural-based products: PVAC, PVOH and starch
dispersion mixture, natural rubber, acrylic water-based adhesive, cellulose
ester, cellulose.
Alodine®
R egistered as a trademark in 1946 as the conversion coating for aluminum
substrates, Alodine® is a series of conversion coatings to improve paint
adhesion and provide corrosion protection for light metal substrates that
consists of metal pretreatments and post rinses for light metal pretreatments.
T he autodeposition coating process is a more simple, cost-effective and
environmentally responsible way of applying a functional anti-corrosive
organic paint layer to metal substrates by means of a chemical, rather than
an electrically driven reaction. Aquence® products include Waterborne Organic
Coatings and related metal pretreatment (chemical cleaners and rinses) products.
S
ince the early 1930’s, Bonderite® was well established in the automotive
and metalworking industries as the conversion coating processes and
chemistries to improve paint adhesion, corrosion protection and wear
resistance to ferrous-based alloys, mixed metal alloys and plastic surfaces. The
products that make up the Bonderite® brand include process line chemistries,
cleaners, pretreatment chemistries including activators and conditioners,
conversion coating chemistries, post treatment chemistries (including rinses
and passivation), as well as auxiliary products including toner, additives,
accelerators and neutralizer.
T he brand name Dorus
(an acronym of the founder’s grandson’s name Doktor
Rudolf Schieber) was registered in 1935 and includes adhesives and systems
for the woodworking and furniture industry. Dorus® branded adhesives include
hot melts (PUR, PO, PA, EVA); 3D dispersions (PU), dispersions (PVAc, EVA)
and urea resin glues; one- and two-component reactive adhesives (PU); and
solvent-based adhesives.
®
F or more than 30 years, Macromelt
adhesives have been known as
engineered hot melt adhesives for industrial applications in various market
segments. These adhesives are thermoplastic 100% solids and include
polyamide (PA) and polyolefin (PO) hot melts.
2
®
O riginally launched in 1967, these structural and semi-structural adhesives
are used in the manufacture of industrial goods and attributes for the cable
industry. Macroplast® branded products include one- and two-component
polyurethanes (PU), PU elastomers, PU hot melts, one- and two-component
epoxy, and solvent-based contact adhesives and cleaners.
S ince the early 1970’s, Multan
branded products have been synonymous
with metal removal and forming lubricants. From liquids to pastes, these watermiscible and non-water-miscible products are used in manual and automated
application systems. Multan® branded products are available in fully synthetic,
semi-synthetic, soluble or straight oil formulations.
®
R
egistered in 1894, the P3® brand didn’t begin to represent cleaners until the
late 1920’s. These cleaners are for metallic and nonmetallic surfaces, fouling
prevention and corrosion protection together with disinfection of water, and
use with wastewater treatments. These products are liquid/powdery products
designed for use in low and high temperature applications at different
pH ranges (acid, neutral and alkaline), and in high-pressure applications,
depending on customer conditions.
O riginally launched in 1989, these reactive polyurethane hot melts are used in
a wide range of high-end assembly bonding applications.
F
irst introduced into industrial assembly applications in 1975, Technomelt®
branded hot melts have been used for consumer packaged goods and general
industrial applications. These hot melt adhesives are thermoplastic 100% solids,
non-reactive conventional technology, and have open times ranging from short
to permanent pressure sensitive.
T eroson
®
branded products have been around since the turn of the 20th
century and include adhesives, sealants, coatings and parts for automotive
assembly, auto aftermarket and general industrial manufacturing. Teroson®
branded products include cleaners; epoxy adhesives; EVA adhesives; MS
sealants and adhesives; polyurethane sealants and adhesives; PVC sealants,
adhesives and coatings; rubber sealants and adhesives; silicone sealants; and
water-based adhesives, sealants and coatings.
3
Markets
Agriculture/
Construction
Agriculture/Construction
Equipment
Overview
Farming, mining, and construction equipment must operate
reliably and efficiently under some of the worst imaginable
conditions. Equipment manufacturers are always looking
for ways to extend usable working life, improve overall
aesthetics and increase robustness. Henkel has
developed a wide range of products that simplify assembly,
extend paint life, minimize part fatigue and increase
operator comfort.
For cab enclosures, our seam sealing and Noise Vibration
Harshness (NVH) technologies help control the elements
that pass through the cab and affect the ultimate comfort of
the operator – from weather to noise, shock and vibration.
Featured Products
• Aquence® 930™ – extreme corrosion protective coating
– Page 38
• Bonderite® NT-1™ – phosphate-free conversion coating
– Page 31
• Multan® B-204™ – semi-synthetic metal removal fluid
– Pages 42, 43
• Terophon® 21007™ – injection molded expanding NVH
foam – Pages 68, 69
Henkel’s Terostat® adhesive technologies have
been specially formulated to bond and seal
dissimilar substrates for multiple cab applications
ranging from plastic to metal bonding.
• Terostat® MS 930™ – adhesive/sealant for elastic
bonding – Pages 60, 61, 68, 69
4
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
Markets
Category
Pages
Surface Preparation, Cleaning & Conversion Coating
28 - 35
Autodeposition Process
36 - 39
Metalworking Fluids
42 - 47
Hot Melt Adhesive Bonding
48 - 53
Structural Bonding
54 - 59
60 - 61
Potting & Encapsulating
62 - 65
Seam Sealing
66 - 67
Reinforcing
68 - 69
Vibration Damping
68 - 69
Air/Water & Energy Management
68 - 69
Water-Based Adhesives
70 - 75
Agriculture/
Construction
Elastomeric Bonding & Sealing
Reinforcing
Hot Melt Adhesive
Bonding
Structural Bonding
Metalworking
Fluids
Water-Based
Adhesives
Seam Sealing
Vibration Damping
Air/Water & Energy
Management
Surface Preparation,
Cleaning &
Conversion Coating
Autodeposition
Process
5
Markets
Appliance
Appliance
Overview
Henkel offers a range of products used in appliance assembly,
from low VOC stamping lubricants for dishwasher panels to
UL-approved sealants that resist unsightly crazing to waterbased, spray-applied adhesives for multi-substrate bonding.
Our low temp cleaners, nanotechnology coatings, and plastics
cleaners help our customers reduce their carbon footprints,
greenhouse gas emissions and overall energy consumption.
Our bio-resistant metalworking products reduce waste,
improve in-plant working conditions and lengthen expensive
tool life.
Featured Products
• Bonderite® NT-1™ – phosphate-free conversion coating
– Page 31
• P3® Polyprep® 110™ Cleaner – low temp plastics cleaner
– Page 40
• Adhesin® 56-5545™ – water-based insulation adhesive
– Pages 72, 73
• Terostat® MS 930™ – adhesive/sealant for elastic bonding
– Pages 60, 61, 68, 69
Henkel’s surface treatment products prepare
metal and plastic surfaces prior to paint to
create a lasting finish.
• Multan® F 6740™ – a synthetic metal forming lubricant
– Pages 44, 45
6
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
Markets
Category
Pages
Surface Preparation, Cleaning & Conversion Coating
28 - 35
Autodeposition Process
36 - 39
Metalworking Fluids
42 - 47
Hot Melt Adhesive Bonding
48 - 53
Structural Bonding
54 - 59
60 - 61
Potting & Encapsulating
62 - 65
Seam Sealing
66 - 67
Reinforcing
68 - 69
Vibration Damping
68 - 69
Air/Water & Energy Management
68 - 69
Water-Based Adhesives
70 - 75
Appliance
Elastomeric Bonding & Sealing
Seam Sealing
Water-Based
Adhesives
Structural Bonding
Potting &
Encapsulating
Hot Melt Adhesive
Bonding
Reinforcing
Surface Preparation,
Cleaning &
Conversion Coating
Air/Water & Energy
Management
Vibration Damping
Metalworking
Fluids
7
Markets
Filter
Filter
Overview
Henkel offers a range of adhesives, lubricants, and surface
preparation products used to fabricate, assemble, and extend
the life cycle of the world’s finest filters. Our products reduce
process complexity and minimize downtime.
For filter can processing, our deep draw lubricants reduce
thinning and splitting. For filter media bonding, our ULcertified, VOC-free adhesives are environmentally responsible
and easy to apply. Our latest innovations include tack-free
hot melts that allow high speed first-last pleat bonding, and
toughened foaming assembly adhesives for fuel resistant
filter designs.
Featured Products
• Adhesin® 56-5531™ – water-based assembly adhesive
– Pages 72, 73
• Macromelt® 2384™ – fuel/oil resistant hot melt adhesive
– Pages 48, 49
From draw compounds for metal filters to hot
melt adhesives for pleating and end cap potting,
Henkel has the right product from end to end.
• Multan® F 985™ – semi-synthetic metal-forming fluid
– Pages 44, 45
• Bonderite® TecTalis® – phosphate-free conversion coating
– Page 31
8
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
Markets
Category
Pages
Surface Preparation, Cleaning & Conversion Coating
28 - 35
Autodeposition Process
36 - 39
Metalworking Fluids
42 - 47
Hot Melt Adhesive Bonding
48 - 53
Structural Bonding
54 - 59
Elastomeric Bonding & Sealing
60 - 61
Potting & Encapsulating
62 - 65
66 - 67
Reinforcing
68 - 69
Vibration Damping
68 - 69
Air/Water & Energy Management
68 - 69
Water-Based Adhesives
70 - 75
Filter
Seam Sealing
Surface Preparation,
Cleaning &
Conversion Coating
Water-Based
Adhesive
Hot Melt Adhesive
Bonding
Metalworking
Fluids
Structural
Bonding
Potting &
Encapsulating
9
Markets
HVAC/Insulation
HVAC/Insulation
Overview
Henkel provides reliable, environmentally responsible adhesive,
sealant, metalworking and surface treatment technologies
for HVAC/insulation manufacturers. Used for bonding,
seam sealing, lubricating, and vibration control, our HVAC
products include flexible duct adhesives, VOC-free insulation
adhesives, structural adhesives, weather-tight sealants, NVH
management systems, and surface treatment coatings for
metal parts.
Our latest innovations include low-VOC fin lubricants, fastsetting assembly adhesives, green nano-based multi-metal
pretreatments, and the world’s first extreme corrosionresistant electroceramic coating for aluminum components.
Featured Products
• Alodine® EC2™ – extreme corrosion protective coating
– Page 34
• Bonderite® NT-1™ – phosphate-free conversion coating
– Page 31
• Multan PL 1439™ – low-VOC fin stamping lubricant
– Pages 44, 45
®
Henkel’s metalworking fluids are used with
the Appli-Coater® system to produce cooling
fins in the HVAC industry.
• Bonderite® TecTalis® – phosphate-free conversion coating
– Page 31
• Adhesin® XA-7594™ Black – UL-approved laminating
adhesive for flexible ducting – Pages 70, 71
• Adhesin® XA-7597™ – UL-approved laminating adhesive for
flexible ducting – Pages 70, 71
• Bondmaster® 40-452A™ – water-based insulation adhesive
– Pages 70, 71
• Bondmaster® 40-0880™ – water-based insulation adhesive
– Pages 70, 71
10
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
Markets
Category
Pages
Surface Preparation, Cleaning & Conversion Coating
28 - 35
Autodeposition Process
36 - 39
Metalworking Fluids
42 - 47
Hot Melt Adhesive Bonding
48 - 53
Structural Bonding
54 - 59
60 - 61
Potting & Encapsulating
62 - 65
Seam Sealing
66 - 67
Reinforcing
68 - 69
Vibration Damping
68 - 69
Air/Water & Energy Management
68 - 69
Water-Based Adhesives
70 - 75
HVAC/Insulation
Elastomeric Bonding & Sealing
Vibration Damping
Structural
Bonding
Metalworking
Fluids
Water-Based
Adhesives
Seam Sealing
Surface Preparation,
Cleaning &
Conversion Coating
11
Markets
Medical Devices
& Equipment
Medical Devices
& Equipment
Overview
To bring today’s increasingly complex medical equipment,
device and utensil designs to life, Henkel offers 132 years
of experience in the industry. Our metalworking fluids
provide the precision required when cutting utensils are
forged, ground and polished. Our assembly adhesives
allow medical device manufactures to bond difficult
substrates without mechanical fasteners, welds or brazing.
For medical devices, our products help form, coat and
protect against wear and tear.
Featured Products
• Alodine® EC2™ – extreme corrosion protective coating
– Page 34
• Aquence® 930™ – extreme corrosion protective coating
– Page 38
• Multan® B-400™ – semi-synthetic metal removal fluid
– Pages 42, 43
Henkel’s metal removal lubricants are used in
precision grinding applications to create precise
instruments for the medical industry.
12
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
Markets
Category
Pages
Surface Preparation, Cleaning & Conversion Coating
28 - 35
Autodeposition Process
36 - 39
Metalworking Fluids
42 - 47
Hot Melt Adhesive Bonding
48 - 53
Structural Bonding
54 - 59
60 - 61
Potting & Encapsulating
62 - 65
Seam Sealing
66 - 67
Reinforcing
68 - 69
Vibration Damping
68 - 69
Air/Water & Energy Management
68 - 69
Water-Based Adhesives
70 - 75
Structural Bonding
Medical Devices
& Equipment
Elastomeric Bonding & Sealing
Surface Preparation,
Cleaning &
Conversion Coating
Water-Based
Adhesives
Metalworking
Fluids
Hot Melt Adhesive
Bonding
13
Markets
Outdoor Power
Equipment
Outdoor Power Equipment
Overview
Outdoor power equipment such as lawnmowers, snowblowers,
generators and chainsaws must reliably perform in challenging
conditions that include torrential rains, blistering heat, and
frigid temperatures. Our coatings, treatments, adhesives,
and sealants help deliver the required robustness, power,
performance and dependability.
From precision cutting lubricants to temperature-resistant
adhesives, Henkel products streamline the manufacturing
process and reduce material consumption. Our coatings,
adhesives and sealants extend paint life, resist corrosion, and
ensure reliability throughout the life of your equipment.
Featured Products
• Alodine® EC2™ – extreme corrosion protective coating
– Page 34
• Aquence® 930™ – extreme corrosion protective coating
– Page 38
• Bonderite® NT-1™ – phosphate-free conversion coating
– Page 31
• Multan® B-400™ – semi-synthetic metal removal fluid
– Pages 42, 43
Henkel’s metalworking and plastics cleaners
are used throughout the industry on a host
of products to produce lasting results
in harsh environments.
• P3® Polyprep® 110™ Cleaner – low temp plastics cleaner
– Pages 40
• Terokal® 4555B™ – structural bonding adhesive
– Pages 58, 59, 68, 69
• Multan® F 2004™ – synthetic metal forming lubricant
– Pages 44, 45
14
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
Markets
Category
Pages
Surface Preparation, Cleaning & Conversion Coating
28 - 35
Autodeposition Process
36 - 39
Metalworking Fluids
42 - 47
Hot Melt Adhesive Bonding
48 - 53
Structural Bonding
54 - 59
60 - 61
Potting & Encapsulating
62 - 65
Seam Sealing
66 - 67
Reinforcing
68 - 69
Vibration Damping
68 - 69
Air/Water & Energy Management
68 - 69
Water-Based Adhesives
70 - 75
Outdoor Power
Equipment
Elastomeric Bonding & Sealing
Reinforcing
Surface Preparation,
Cleaning &
Conversion Coating
Hot Melt Adhesive
Bonding
Water-Based
Adhesives
Structural
Bonding
Vibration Damping
Metalworking
Fluids
Surface Preparation,
Cleaning &
Conversion Coating
Seam Sealing
15
Markets
Pump &
Compressor
Pump & Compressor
Overview
Pumps and compressors operate in extremely corrosive
environments, delivering power and pressure on demand.
From appliance compressors to industrial water pumps,
manufacturers rely on Henkel metalworking fluids, surface
treatments, metal cleaning fluids, and assembly adhesives
to cut, form, shape, and assemble these hard-working
machines. Our seam sealants and NVH products protect
these machines and keep them running smoothly without
damage from vibration.
Featured Products
• Bonderite® NT-1™ – phosphate-free conversion coating
– Page 31
• Macromelt® 2384™ – fuel/oil resistant hot melt adhesive
– Pages 48, 49
• Multan® B-204™ – semi-synthetic metal removal fluid
– Pages 42, 43
• Multan® B-414™ – low foam semi-synthetic removal fluid
– Pages 42, 43
• Multan F 2004™ – synthetic metal forming lubricant
– Pages 44, 45
®
Henkel’s precision grinding and heavy forming
lubricants keep pump and compressor
manufacturers running smooth and clean.
• Multan® PL 298™ – hydroforming-die side, replace
chlorinated oils, heavy stampings
– Pages 44, 45
• Alodine® EC2™ – extreme corrosion protective coating
– Page 34
• Terokal® 4555B™ – structural bonding adhesive
– Pages 58, 59, 68, 69
16
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
Markets
Category
Pages
Surface Preparation, Cleaning & Conversion Coating
28 - 35
Autodeposition Process
36 - 39
Metalworking Fluids
42 - 47
Hot Melt Adhesive Bonding
48 - 53
Structural Bonding
54 - 59
60 - 61
Potting & Encapsulating
62 - 65
Seam Sealing
66 - 67
Reinforcing
68 - 69
Vibration Damping
68 - 69
Air/Water & Energy Management
68 - 69
Water-Based Adhesives
70 - 75
Pump &
Compressor
Elastomeric Bonding & Sealing
Surface Preparation,
Cleaning &
Conversion Coating
Seam Sealing
Metalworking
Fluids
Structural Bonding
Vibration Damping
17
Markets
Recreational
Vehicle
Recreational Vehicle
Overview
From chassis to roof system, end cap to front bumper, Henkel
adhesives, sealants, and surface treatments help make RV
designs more reliable, dependable, and comfortable. Our
solutions range from metal pretreatment systems for frames
to adhesives for panel laminations to plastic cleaners for paint
preparation. Our products reduce rattles and noises, minimize
water leakage, seal out weather, and improve the structural
strength of these homes on wheels.
Featured Products
• Bonderite® NT-1™ – phosphate-free conversion coating
– Page 31
• Macroplast® SIA-110™ – laminating moisture cure
adhesive – Page 56, 57
• P3® Parcosol® 283™ Wipes – aluminum wipes for
cleaning – Page 41
• P3® Polyprep® 110™ Cleaner – low temp plastics cleaner
– Page 40
• Terokal® 4555B™ – structural bonding adhesive
– Pages 58, 59, 68, 69
Henkel Hot Melt adhesives are key to a lasting
laminated wall and are designed to bond
dissimilar materials as in wall manufacturing.
Henkel is proud to feature the FIBRECYCLE™ K.E.G. (Keep Earth
Green) Packaging Solution – a 100% recyclable drum for many of
our PUR-FECT LOK™ and PURMELT® panel laminating adhesives.
18
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
Markets
Category
Pages
Surface Preparation, Cleaning & Conversion Coating
28 - 35
Autodeposition Process
36 - 39
Metalworking Fluids
42 - 47
Hot Melt Adhesive Bonding
48 - 53
Structural Bonding
54 - 59
60 - 61
Potting & Encapsulating
62 - 65
Seam Sealing
66 - 67
Reinforcing
68 - 69
Vibration Damping
68 - 69
Air/Water & Energy Management
68 - 69
Water-Based Adhesives
70 - 75
Recreational
Vehicle
Elastomeric Bonding & Sealing
Seam
Sealing
Surface Preparation,
Cleaning &
Conversion Coating
Air/Water & Energy
Management
Water-Based
Adhesives
Hot Melt Adhesive
Bonding
Structural
Bonding
Metalworking
Fluids
Vibration
Damping
Reinforcing
19
Markets
Smart Cards
Smart Cards
Overview
Smart cards can be simple readable electronic ID badges or
complex storage, retrieval and cataloging systems. In smart
card manufacturing, Henkel adhesives are used to laminate
layers of thin plastic films and to attach microprocessors. As
a final step, our surface treatments can be used to clean and
prepare the card for printing. Henkel has helped expand the
global smart card market by simplifying the manufacturing and
laminating process.
Leading Product Chemistries
• Polyurethane Adhesives
• Polyurethane Dispersions
• Polyamides
• Plastic Coatings
Typical Applications Include
• Layer Lamination
Henkel’s laminating adhesives are designed
for permanent bonding of thin layers.
• Chip Bonding
• Scratch Resistant Coating
• Plastic Cleaning
Henkel’s custom formulating capabilities
allow smart card manufacturers the
flexibility to assemble difficult substrates.
20
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
Markets
Category
Pages
Surface Preparation, Cleaning & Conversion Coating
28 - 35
Autodeposition Process
36 - 39
Metalworking Fluids
42 - 47
Hot Melt Adhesive Bonding
48 - 53
Structural Bonding
54 - 59
60 - 61
Potting & Encapsulating
62 - 65
Seam Sealing
66 - 67
Reinforcing
68 - 69
Vibration Damping
68 - 69
Air/Water & Energy Management
68 - 69
Water-Based Adhesives
70 - 75
Smart Cards
Elastomeric Bonding & Sealing
Water-Based
Adhesives
Hot Melt Adhesive
Bonding
Surface Preparation,
Cleaning &
Conversion Coating
21
Markets
Solar Energy
Solar Energy
Overview
Leading solar technology companies turn to Henkel to
formulate and deliver innovative compounds, solutions, and
systems that reduce processing time, increase efficiency,
and ease installation. Our R&D in the solar industry has
allowed us to develop surface treatment products that
make difficult substrates easier to bond, coating products
that allow for extended solar panel life, and adhesives and
sealants that facilitate assembly of photovoltaic modules
and solar concentrators.
Featured Products
• Alodine® EC2™ – extreme corrosion protective coating
– Page 34
• Bonderite® NT-1™ – phosphate-free conversion coating
– Page 31
• P3® Polyprep® 110™ Cleaner – low temp plastics
cleaner – Page 40
• Multan® F 2004™ – synthetic metal forming lubricant
– Pages 44, 45
Henkel’s Terostat® branded sealants keep
photovoltaic cells sealed from the
elements for lasting results.
• Terostat® MS 930™ – adhesive/sealant for elastic
bonding – Pages 60, 61, 68, 69
• Terostat® 2761™ – sealant for moisture barrier*
• Purmelt® QR-4663™ – adhesive for junction box
bonding – Pages 52, 53
• Purmelt® Purfect Glaze 91-822A™ – adhesive for
junction box attachment – Pages 52-53
• Macromelt® 6208S™ – polyamide potting hot
melt sealant – Pages 48, 49
* Currently available in Europe only, contact Henkel marketing for more information.
22
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
Markets
Category
Pages
Surface Preparation, Cleaning & Conversion Coating
28 - 35
Autodeposition Process
36 - 39
Metalworking Fluids
42 - 47
Hot Melt Adhesive Bonding
48 - 53
Structural Bonding
54 - 59
60 - 61
Potting & Encapsulating
62 - 65
Seam Sealing
66 - 67
Reinforcing
68 - 69
Vibration Damping
68 - 69
Air/Water & Energy Management
68 - 69
Water-Based Adhesives
70 - 75
Solar Energy
Elastomeric Bonding & Sealing
Metalworking
Fluids
Structural Bonding
Seam Sealing
Hot Melt Adhesive
Bonding
Potting &
Encapsulating
Surface Preparation,
Cleaning &
Conversion Coating
23
Markets
Specialty
Vehicle
Specialty Vehicle
Overview
As specialty vehicles such as boom trucks, forklifts and
portable warehouses become more advanced, so do
the processes that go into manufacturing them. Henkel
adhesives, sealants and surface treatments help reduce
vehicle weight, decrease corrosion, improve aesthetics, and
eliminate visible assembly fasteners. From environmentally
responsible metal pretreatments to fracture toughened
structural bonding adhesives, Henkel technology leads the
way on these unique vehicles.
Featured Products
• Bonderite® NT-1™ – phosphate-free conversion coating
– Page 31
• Alodine® 5700™ – aluminum conversion coating
– Page 34
• P3® Polyprep® 110™ Cleaner – low temp plastics
cleaner – Page 40
• Aquence® 930™ – extreme corrosion protective coating
– Page 38
• Macromelt® 2384™ – fuel/oil resistant hot melt adhesive
– Pages 48, 49
• Terokal® 4555B™ – structural bonding adhesive
– Pages 58, 59, 68, 69
24
Henkel’s metal pretreatment technologies lead
the industry in green, phosphate-free, conversion
coating systems such as Bonderite® NT-1™.
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
Markets
Category
Pages
Surface Preparation, Cleaning & Conversion Coating
28 - 35
Autodeposition Process
36 - 39
Metalworking Fluids
42 - 47
Hot Melt Adhesive Bonding
48 - 53
Structural Bonding
54 - 59
60 - 61
Potting & Encapsulating
62 - 65
Seam Sealing
66 - 67
Reinforcing
68 - 69
Vibration Damping
68 - 69
Air/Water & Energy Management
68 - 69
Water-Based Adhesives
70 - 75
Specialty
Vehicle
Elastomeric Bonding & Sealing
Hot Melt Adhesive
Bonding
Reinforcing
Seam Sealing
Metalworking
Fluids
Surface Preparation,
Cleaning &
Conversion Coating
Structural Bonding
Air/Water & Energy
Management
Vibration Damping
Water-Based
Adhesives
Autodeposition
Process
25
Markets
Wind Energy
Wind Energy
Overview
Henkel offers innovative solutions for wind blade bonding,
gearbox sealing and tower corrosion protection. Our
reduced-VOC adhesives and sealants, energy saving surface
preparation coatings, and weight-reducing reinforced
structural products are shortening product development
cycles, lowering carbon footprints, reducing fossil fuel
consumption, and generating increasingly more efficient
means to transport energy.
Featured Products
• Alodine® EC2™ – extreme corrosion protective coating
– Page 34
• Bonderite® NT-1™ – phosphate-free conversion coating
– Page 31
• P3® Polyprep® 110™ Cleaner – low temp plastics cleaner
– Page 40
• Multan® B-400™ – semi-synthetic metal removal fluid
– Pages 42, 43
• Terostat® MS 939™ – adhesive/sealant for bonding
– Pages 60, 61, 68, 69
• Terostat® 2761™ – sealant for vacuum infusion process
• Macroplast® UK-1340™ – polyurethane blade bonding
adhesive – Pages 56, 57
Application
Henkel’s structural urethane adhesive
technology is used in blade bonding
specifically formulated to withstand the
requirements of the wind energy industry.
• Macroplast® UK-5401™ – polyurethane blade bonding
hardener – Pages 56, 57
26
For additional product offerings and the markets we serve, please visit: www.henkelna.com/industrial
Markets
Category
Pages
Surface Preparation, Cleaning & Conversion Coating
28 - 35
Autodeposition Process
36 - 39
Metalworking Fluids
42 - 47
Hot Melt Adhesive Bonding
48 - 53
Structural Bonding
54 - 59
60 - 61
Potting & Encapsulating
62 - 65
Seam Sealing
66 - 67
Reinforcing
68 - 69
Vibration Damping
68 - 69
Air/Water & Energy Management
68 - 69
Water-Based Adhesives
70 - 75
Wind Energy
Elastomeric Bonding & Sealing
Structural Bonding
Vibration
Damping
Metalworking
Fluids
Seam Sealing
Air/Water & Energy
Management
Surface Preparation,
Cleaning &
Conversion Coating
27
Products
With more than 80 years
of experience in surface
treatment, Henkel has developed
technologies for most ferrous,
non-ferrous and polymer
substrates. These products range
from traditional iron phosphates
to green, heavy metal and
phosphate-free nanotechnologies
that work on a variety of metals.
Alkaline Cleaners
Applied by spray, immersion and stripline units, these strong alkaline treatments are
particularly recommended for use before Bonderite® processes. Alkaline cleaners are
used to remove organic soils such as dirt, oils and grease.
Phosphate
Gluconate
X
X
X
100°F - 140°F
X
X
X
X
X
X
X
120°F - 180°F
X
X
X
X
X
X
X
X
140°F - 210°F
X
X
X
X
X
X
X
X
Parco® Cleaner HCS10™
NEW!
Parco® Cleaner ZX-1™
X
Parco® Cleaner ZX-3™
X
X
X
Ridoline® 412™
X
X
X
X
X
X
X
X
X
X
X
X
X
Ridoline RT-163™
NEW!
NEW!
Ridoline® RT-173™ &
RT-173s™
NEW!
Ridoline® RT-153™
®
120°F - 180°F
X
X
140°F - 200°F
X
130°F - 180°F
X
X
Inter-stage
Protection
Potassium
X
X
Sodium
X
Parco® Cleaner 319™
Aluminum/
Magnesium
Parco® Cleaner 305™
Products
Steel/Heavy
Duty
Operating
Temperature
Builders
Heavy Etch
on Al & Zn
Temperature
Multi-Metal
Etch
Immersion
Substrate
Spray
Henkel’s groundbreaking
nanotechnology metal
pretreatment products provide
extended paint life, improved
aesthetics and enhanced corrosion
resistance for a range of industrial
manufacturers. These continuous
coating processes clean, convert
surfaces, and seal metals while
minimizing in-plant energy
consumption, reducing waste, and
lowering footprint requirements.
Liquid
Surface Prep,
Cleaning & Coating
Surface Preparation, Cleaning
& Conversion Coating
X
X
X
X
80°F - 153°F
X
X
X
X
80°F - 160°F
X
Low
X
X
80°F - 160°F
X
X
Parco® Cleaner 305™ – Alkaline cleaner designed to prepare aluminum, steel, hot-dip galvanized
and electrogalvanized steel surfaces.
Parco® Cleaner 319™ – Alkaline cleaner designed to prepare aluminum, steel, electrogalvanized and
hot-dip galvanized surfaces to receive a conversion coating, or used prior to a plating operation.
Parco® Cleaner HCS10™ – A heavy duty alkaline cleaner for ferrous parts.
Parco® Cleaner ZX-1™ – Alkaline cleaner designed to prepare aluminum, steel, electrogalvanized and
hot-dip galvanized surfaces to receive a conversion coating, or used prior to a plating operation.
Parco® Cleaner ZX-3™ – Alkaline cleaner designed to prepare ferrous surfaces to receive a
conversion coating. Can be used to strip phosphate and lubed parts prior to a coating, plating or
machining operation.
Ridoline® 412™ – This concentrated alkaline cleaner, liquid, silicate-free, mildly alkaline cleaner
removes oils and light oxide films from aluminum and its alloys.
Ridoline® RT-153™ – A room temperature cleaner designed to prepare aluminum, steel, hot-dip
galvanized and electrogalvanized steel surfaces.
Ridoline® RT-163™ – A unique surfactant system able to clean tenacious soils at low temperatures;
provides in-plant rust protection.
Ridoline® RT-173™ & RT-173s™ – A two-package, low temp cleaning system effective in spray or
immersion for the removal of metalworking fluids and soils.
Alkaline Cleaner
28
Acid Cleaner
Conditioner
Conversion Coating
Post Treatment
For a comprehensive list of package sizes and product offerings, call us at:
1-800-521-1355
Products
Alodine®
Surface Prep,
Cleaning & Coating
Acid Cleaners
Acid cleaners are used prior to conversion coating and are designed to remove
inorganic soils such as weld and laser scale, and other oxides such as rust. Acid
cleaners are also widely used as maintenance cleaners.
X
X
Ambient - 180°F
X
X
X
120°F - 150°F
X
Parco® Purge 2520™
X
X
X
Ambient
Deoxidine® A-500™
X
X
X
Ambient
Sulfuric
Phosphoric Acid
X
X
Nitric Acid
Operating
Temperature
X
Hydrochloric Acid
Heavy Duty/for Steel
Deoxidine® 182B™
Parco® Cleaner 2530™
Products
Immersion
Spray
Contents
Liquid
Temperature
X
X
Deoxidine® 182B™ – A phosphoric acid-based, detergent-type metal cleaner designed to
remove rust and oxides left from laser cutting and welding on steel surfaces.
Parco® Cleaner 2530™ – This acidic cleaner is specifically formulated to remove scale from
closed loop stainless steel heat transfer systems.
Parco® Purge 2520™ – This acid cleaner for heat-exchanger cleaning has an ambient
operating temperature, is acidic, and is specifically formulated to remove scale from
closed-loop stainless steel heat transfer systems.
Deoxidine® A-500™ – This specially formulated inhibited liquid acid cleaner cleans powerspray processing equipment and relatively inaccessible areas (such as pump intakes),
minimizing labor required for cleaning and prolonging equipment life.
Alkaline Cleaner
Acid Cleaner
Conditioner
Conversion Coating
Post Treatment
For a comprehensive list of package sizes and product offerings, call us at:
1-800-521-1355
29
Products
Surface Prep,
Cleaning & Coating
Surface Preparation, Cleaning
& Conversion Coating
Conditioners
Use of these conditioners promotes the formation of a dense, fine-grained phosphate coating
that is preferred as a paint base for the automotive industry, and offers superior adhesion
and durability in corrosive environments. Surfaces may be treated individually or in mixed
production by either spray or immersion processing.
Immersion
Manganese Coatings
Liquid
Fixodine® M™
X
X
X
Prepalene™ X™
X
X
X
Temperature Range
Spray
X
Products
Zinc Coatings
Powder
Application
Ambient - 180°F
X
Ambient - 120°F
Fixodine® M™ – A powdered conditioning agent used for articles of iron and steel, ahead of a
Parco® Lubrite® treatment.
Prepalene™ X™ – This patented, easy to handle liquid conditioning rinse prepares iron, steel,
aluminum, zinc and zinc-alloy surfaces for subsequent phosphate coating applications for
use with zinc phosphate conversion coating systems.
Alkaline Cleaner
30
Acid Cleaner
Conditioner
Conversion Coating
Post Treatment
For a comprehensive list of package sizes and product offerings, call us at:
1-800-521-1355
Products
Alodine®
Surface Prep,
Cleaning & Coating
Phosphate-Free Conversion Coatings
An environmentally responsible process that converts the metal surface to a nanothin coating containing no heavy metals or phosphates. The metals may be treated
individually or in mixed production.
Spray
Immersion
Steel
Zinc
Aluminum
Crystal Type
Temperature
Range
Substrate
X
X
X
X
X
Nano
55°F - 100°F
X
X
X
X
X
Nano
55°F - 100°F
Products
Bonderite® NT-1™
Bonderite® TecTalis®
NEW!
Bonderite® NT-1™ – This zirconium-based nanotechnology provides a green alternative to
traditional iron phosphate. It runs at low temperatures and is completely phosphateand regulated heavy metal-free, to reduce energy consumption and waste removal.
Bonderite® TecTalis® – This zirconium-based nanotechnology provides a green alternative
to traditional zinc phosphate. It runs at low temperatures and is completely phosphateand regulated heavy metal-free, to reduce energy consumption and waste removal.
Alkaline Cleaner
Acid Cleaner
Conditioner
Conversion Coating
Post Treatment
For a comprehensive list of package sizes and product offerings, call us at:
1-800-521-1355
31
Products
Surface Prep,
Cleaning & Coating
Surface Preparation, Cleaning
& Conversion Coating
Iron Phosphate Conversion Coatings
These processes convert the metal surface to a nonmetallic, iron phosphate coating that inhibits
corrosion, and increases the adhesion and durability of paint finishes. These substantial increases in
the life of the paint result from the fact that the coating provides a clean, grease-free/oil-free surface,
corrosion-inhibiting base for paint, and a non-conducting bond between the base metal and the paint.
Multi-Metal
Organic
Fluoride
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Temperature
Range
Steel
X
Sufactant
Immersion
Temperature
Spray
Acceleration
Liquid
Products
Spray Wand
Substrate
Five-Stage Products
Bonderite® 1090™
110°F - 150°F
Three-Stage Products
Bonderite® 1070™
X
110°F - 150°F
X
90°F - 140°F
X
130°F - 190°F
Cleaner / Coater Products
Prep-N-Cote® 500 LT™
X
Spray Wand Products
Parco® Spray Wand
200™
X
X
X
X
X
X
Five-Stage Products
Bonderite 1090™ – This iron phosphate is for use in five-stage processes and imparts an amorphous, nonheavy metal phosphate conversion coating that treats steel and multi-metal substrates simultaneously.
®
Three-Stage Products
Bonderite 1070™ – This iron phosphate is for use in three-stage processes, and formulated for spray and
immersion application to steel, aluminum and zinc surfaces to simultaneously clean and develop a
conversion coating.
®
Cleaner/Coater Products
Prep-N-Cote 500 LT™ – This iron phosphate cleaner- and coater-in-one has been formulated for spray
application of steel surfaces to simultaneously clean and coat metal surfaces.
®
Spray Wand Products
Parco Spray Wand 200™ – Designed to simultaneously clean and impart an iron phosphate conversion
coating on aluminum and zinc surfaces by use of a spray wand application.
®
Alkaline Cleaner
32
Acid Cleaner
Conditioner
Conversion Coating
Post Treatment
For a comprehensive list of package sizes and product offerings, call us at:
1-800-521-1355
Products
Alodine®
Surface Prep,
Cleaning & Coating
Manganese Phosphate Conversion Coatings
These corrosion-resistant coatings consist chiefly of iron and manganese phosphates, and reduce wear on
such articles as pistons, rings, liners, camshafts, tappets, motor blocks and similar bearing surfaces. Other
beneficial effects are: permits rapid break-in of moving parts without scuffing or welding by preventing
metal-to-metal contact between the bearing surfaces; increases lubrication of treated surfaces due to the
oil-absorptive coating; and removes light metal scratches remaining from machining operations.
Immersion
Steel
Acceleration
Temperature
Range
Parco® Lubrite® LT-10™
Spray
Liquid
Products
Powder
Temperature
X
X
Internal
135°F - 155°F
X
Parco® Lubrite® LT-10™ – An energy saving, low operating temperature manganese phosphate conversion
coating formulated to produce a nonmetallic, corrosion resistant coating on iron and steel surfaces. Extremely
effective for use where there is metal-to-metal contact.
Zinc Phosphate Conversion Coatings
The process converts the metal surface to a nonmetallic, polycrystalline coating containing iron,
manganese, nickel and zinc phosphates. The metals may be treated individually or in mixed production.
Temperature
Range
Temperature
Nickel
Manganese
Crystal Type
Contents
Acceleration
Aluminum
Zinc
Steel
Immersion
Products
Spray
Substrate
Bonderite® ZM-1™
X
X
X
X
X
Internal
Micro
X
120°F - 135°F
Bonderite® ZM-2™
X
X
X
X
X
Internal
Micro
X
120°F - 135°F
Bonderite® 2010™
X
X
X
X
X
Internal
Micro
X
Bonderite® 2101™
X
X
X
X
X
Internal
Micro
X
X
120°F - 135°F
120°F - 135°F
Bonderite® ZM-1™ – This zinc phosphate conversion coating converts metallic substrate surfaces to a finecrystalline, non-metallic zinc phosphate coating that inhibits corrosion, and increases the adhesion and
durability of organic paints and finishes.
Bonderite® ZM-2™ – A lower concentrate version of Bonderite® ZM-1™, which requires less diluent when adding
to process tanks.
Bonderite® 2010™ – This zinc phosphate is formulated for immersion application to steel, galvanized steel,
electrogalvanized steel, zinc-alloy coated steel and aluminum. Provides high alkaline resistance and is
preferred as a paint base, offering superior adhesion and durability.
Bonderite® 2101™ – Nickel-free zinc phosphate chemistry.
Alkaline Cleaner
Acid Cleaner
Conditioner
Conversion Coating
Post Treatment
33
Products
Surface Prep,
Cleaning & Coating
Surface Preparation, Cleaning
& Conversion Coating
X
X
X
X
X
X
X
X
X
X
X
X
Alodine® 2600™
X
X
X
X
X
X
Military
Approvals
70°F - 120°F
X
X
100°F - 135°F
Dry in Place
X
X
85°F - 120°F
Reactive
X
Alodine® 5700™
External
X
Internal
X
Aluminum
Immersion
X
Zinc
Spray
Alodine® 5200™
Products
Magnesium
Liquid
Light Metals Conversion Coatings
Non-Chrome Technology
Alodine® 4595™
Alodine® EC2™
NEW!
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Chrome Technology
Alodine® 1600™
X
X
X
X
X
Alodine® 1500™
X
X
X
X
Alodine® 407™
X
X
X
X
Alodine® T 5900™
X
X
X
X
X
X
X
X
X
X
X
Non-Chrome Technology
Alodine 5200™ – A chromium-free titanium/polymer conversion coating for non-ferrous alloys for bonding and
organic finishes.
®
Alodine® 5700™ – A ready-to-use version of Alodine® 5200™, also available in convenient wipes.
Alodine® 2600™ – A cobalt-based conversion coating for aluminum.
Alodine® 4595™ – A chromium-free zirconium/polymer product for treating aluminum to provide an excellent base
for organic finishes and bonding.
Alodine® EC2™ – An electro-ceramic coating that is chromium-free and formulated for coating aluminum, titanium
and their alloys, and can function as the final finish to provide extreme corrosion protection.
Chrome Technology
Alodine 1600™ – A liquid MIL-DTL-81706/MIL-DTL-5541F approved chromate to Class 1A and 3 to produce a
protective coating on aluminum.
®
Alodine® 1500™ – A liquid MIL-DTL-81706/MIL-DTL-5541F approved chromate to Class 3 to produce a protective
coating on aluminum.
Alodine® 407™ – A chrome phosphate conversion coating for architectural applications.
Alodine® T 5900™ – A trivalent chrome conversion coating approved to MIL-DTL-81706/MIL-DTL-5541F Class 1A
and 3.
Alkaline Cleaner
34
Acid Cleaner
Conditioner
Conversion Coating
For a comprehensive list of package sizes and product offerings, call us at:
Post Treatment
1-800-521-1355
Products
Alodine®
Surface Prep,
Cleaning & Coating
Post-Treatment
Spray
Immersion
Steel
Galvanized
Aluminum
Non-Chrome
Organic
Ambient
DIW Rinse/
After
Wet
Powder
E-Coat
Parcolene® 99X™
Reactive
Products
Paint System
Liquid
Substrate
X
X
X
X
X
X
X
X
X
X
X
X
X
XX
Parcolene® 99X™ – A patented, chromium and phosphate-free post treatment that increases paint
adhesion and corrosion resistance of metal surfaces for use over all types of conversion coatings
used in the pretreatment of steel, zinc, and aluminum surfaces.
Alkaline Cleaner
Acid Cleaner
Conditioner
Conversion Coating
For a comprehensive list of package sizes and product offerings, call us at:
Post Treatment
1-800-521-1355
35
Products
By streamlining the metal finishing
process, the Aquence® process
reduces in-plant space requirements,
energy consumption and processing
steps, while increasing corrosion
resistance and life expectancy of
critical components. We offer our
customers a full pilot line capable of
running prototype trials to demonstrate
the benefits of the Aquence® process.
Aquence®
2592™
X
X
O
X
X
X
Aquence®
2599™
X
X
X
O
X
Aquence®
2600™
X
X
X
O
X
Aquence®
2810™
X
X
O
X
X
Aquence®
Cleaner 2819™
X
X
X
X
X
Aquence
2860™
X
X
X
O
X
X
X
X
X
X
X
®
Split-out
Phosphates
Emulsify
Temperature
Range
O
X
180°F 200°F
O
120°F 160°F
X
150°F 180°F
X
120°F 160°F
X
X
O
X
O
O
140°F 180°F
X
O
X
150°F 200°F
X
X
O
X
80°F 180°F
X
X
O
X
X
120°F 190°F
X
X
trace
X
X
Aquence
182A™
X
X
Aquence
7005™
X
X
Aquence
7150™
X
X
X
O
X
X
X
O
X
135°F 165°F
X
Aquence
7310™
X
X
X
O
X
X
O
O
X
145°F 175°F
X
Aquence
7320™
X
X
X
O
X
O
X
O
X
145°F 175°F
X
®
®
®
®
®
trace
X
X = Primary Attribute
O = Secondary Attribute
For more information, please visit:
www.autophoretic.com
36
X
140°F 190°F
X
X
X
O
X
O
Drawing
Compounds
X
Removes Flash
Rust
O
Weldments/Scale
X
Medium Duty
X
Light Duty
X
Galvanized/Zinc
Steel
X
Immersion
X
Spray
Aquence®
Cleaner 1772™
Acid
Products
Alkaline
Cleaners
Powder
Henkel’s patented Aquence®
autodeposition process chemistries
deliver extreme corrosion protection
while increasing process efficiency
over traditional finishing methods.
The Aquence® process coats complex
parts evenly and can stand alone as
the finished surface or accept topcoat
paint for aesthetics. The Aquence®
process combines metal pretreatment,
coating and finishing, and provides
a lasting finish both inside of parts
and out.
Liquid
Autodeposition
Coatings
Autodeposition Coatings
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
Autodeposition
Coatings
Alkaline Cleaners
Aquence Cleaner 1772™ – A powdered, non-silicated, strongly alkaline cleaner formulated for use in spray process
equipment for heavy duty cleaning of ferrous metals prior to autodeposition.
®
Aquence® 2592™ – A liquid, alkaline cleaner formulated for heavy duty, general purpose cleaning of ferrous metals and is used
to remove soils, oils, and forming lubricants from steel prior to the application of autodeposited coatings.
Aquence® 2599™ – An alkaline cleaner designed to prepare steel surfaces to receive an Aquence® coating.
Aquence® 2600™ – A liquid, phosphate and silicate free, strong alkaline cleaner formulated for heavy duty cleaning of ferrous
metal surfaces prior to autodeposition.
Aquence® 2810™ – A non-silicated, liquid, alkaline cleaner formulated for heavy duty, general purpose cleaning of
ferrous metals used to remove a variety of soils, oils and forming lubricants from steel prior to the application of
autodeposited coatings.
Aquence® Cleaner 2819™ – Prepares steel, electrogalvanized and hot-dip galvanized surfaces to receive an Aquence® coating.
This strongly alkaline treatment can be applied by spray or immersion.
Aquence® 2860™ – A liquid, non-silicated, strongly alkaline cleaner formulated for use in immersion process equipment for
heavy duty cleaning and oxide removal from ferrous metal surfaces prior to autodeposition.
Acid Cleaners
Aquence 182A™ – This phosphoric acid-based, detergent-type metal cleaner and rust remover with biodegradable organic
surfactants destroys corrosion stimulators and can be used in spray or immersion systems to remove rust and light
deposits of mill oil on steel parts.
®
Aquence® 7005™ – An acidic composition, which when diluted with water, produces a mixed mineral acid-solvent-detergent
liquid metal cleaner and rust remover. It will effectively remove rust, scale, and light deposits of mill oil from the surface of
metals and properly condition steel surfaces.
Aquence® 7150™ – An acidic composition, for use in spray washing systems prior to Aquence® paint films and for removing
light rust and oxidation from iron and steel surfaces. For effective derusting, articles must be free from grease and oil
before cleaning.
Aquence® 7310™ – An acidic composition, spray cleaning solution for removing light rust and oxidation from iron and steel
surfaces prior to the application of an Aquence® paint film.
Aquence® 7320™ – An acidic composition, which when diluted with water, produces a spray/dip cleaning solution for removing
light rust, oxidation and oily soils from iron and steel surfaces prior to the application of Aquence® Coating Chemicals. The
performance of the coated part is improved when cleaning is followed by ultrasonic-assisted rinsing.
Cleaner
Coating
Reaction Rinse
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
37
Products
Autodeposition
Coatings
Autodeposition Coatings
Cyclic Corrosion
VOC
Impact Resistance
(in./lbs.)
Pencil Hardness
Process Efficiency
X
X
X
None
120 - 160
4H - 7H
Medium High
No
200°F 220°F
38%
Aquence
866IX™
PVDC
5 - 10
X
X
X
None
120 - 160
4H - 7H
Very High
No
200°F 220°F
38%
40 - 80
X
X
X
Very
Low
60 - 80
H - 3H
Medium High
Yes
350°F 385°F
33%
X
Very
Low
60 - 80
H - 3H
Very High
Yes
350°F 385°F
33%
60 - 80
H - 3H
Medium High
Yes
325°F 365°F
33%
60 - 100
H - 3H
Medium High
Yes
350°F 385°F
33%
®
Aquence® 915™
Epoxy / Acrylic
Urethane
Aquence
915IX™
Epoxy / Acrylic
Urethane
Aquence®
!
925G™ N E W
Epoxy / Acrylic
Urethane
X
40 - 80
X
X
X
Very
Low
Aquence®
!
930™ N E W
Epoxy / Acrylic
Urethane
X
30 - 80
X
X
X
Very
Low
®
X
X
40 - 80
X
X
Paint Solids (%
weight)
Salt Spray
Resistance
5 - 10
Cure Temperature
Range
Flexibility
PVDC
Flash-Off Oven
Gloss Range
Aquence® 866™
High Operating
Temperature
Resistance
Products
Resin Base
Coatings
X = Primary Attribute
O = Secondary Attribute
Aquence® 866™ – A smooth, black, water-based, organic coating for ferrous metal surfaces. When deposited uniformly
on the metal surface, it will coat recessed or partially enclosed surfaces to provide low cure solvent and heavy
metal-free coatings with good corrosion resistance, solvent resistance, adhesion, flexibility and hardness.
Aquence® 866IX™ – A high efficiency replenisher used to produce a smooth, black, water-based, organic coating on
ferrous metal surfaces. When deposited uniformly on the metal surface, it will coat recessed or partially enclosed
surfaces to provide low cure coating with good corrosion resistance, solvent resistance, adhesion, flexibility and
hardness free of solvents or heavy metals.
Aquence® 915™ – A concentrated liquid chemical used to produce a black, water-based, organic coating on ferrous
metal surfaces. When deposited uniformly on the metal surface, it will coat recessed or partially enclosed surfaces.
Aquence® 915IX™ – A high efficiency, concentrated, water-based, liquid chemical used to produce a black organic
coating on ferrous metal surfaces. When deposited uniformly on the metal surface, it will coat recessed or partially
enclosed surfaces.
Aquence® 925G™ – Coating chemicals consist of two components of concentrated, liquid chemicals used to produce a
grey, organic, water-based coating on ferrous metal surfaces. When deposited uniformly on the metal surface, it will
coat recessed or partially enclosed surfaces. Design of this coating is for a lighter, non-black primer for accepting
color specific topcoats.
Aquence® 930™ – This epoxy-acrylic urethane coating is environmentally responsible, heavy metal-free, with low VOC
that delivers enhanced corrosion performance for demanding applications like frames and chassis components.
Cleaner
38
Coating
Reaction Rinse
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
Autodeposition
Coatings
X
X
X
X
X
X
X
X
X
Process Tank
Temperature
X
Concentration
X
Surface
Smoothness
X
Gloss
X
X
Bending/Forming
X
Calcium/Phosphate
X
Zirconium
X
X
Phosphonate
X
Acid
Alkaline
Neutral
O
Solvent Resistance
900
O
Chemical Fluid
Resistance
Aquence® E3™
X
Cyclic Corrosion
Resistance
900
X
X
Salt Spray
Resistance
Aquence® E2™
Castings
800
Forgings
Aquence
3416™
HRS
800
®
CRS
Aquence®
2150™
Multi-Component
Products
Coating Series
Reaction Rinses
X
O
X
O
X
Low
Low
1% - 3%
RT
X
O
O
O
X
Medium
High
1% - 10%
RT
X
O
X
X
X
Medium
Medium
1% - 4%
125°F 140°F
X
X
O
O
X
High
Medium
0.36% E3A
3.6% E3B
1% E3C
125°F
X = Primary Attribute
O = Secondary Attribute
Aquence® 2150™ – A liquid chemical used to improve the water resistance, corrosion resistance and adhesion properties of cured
Aquence® 800 series coatings.
Aquence® 3416™ – An alkaline liquid chemical used as an immersion reaction rinse for surfaces treated with Aquence® coating
chemicals to improve the uniformity and gloss of coating appearance.
Aquence® E2™ – A liquid chemical used to improve the water and corrosion resistance along with improved adhesion properties of cured
Aquence® 900 series coatings.
Aquence® E3™ – A liquid chemical used to improve the corrosion resistance, coverage and appearance of cured Aquence®
ACC® 900 series coatings.
For more information, please visit:
www.autophoretic.com
Cleaner
Coating
Reaction Rinse
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
39
Products
Plastic Cleaners and Rinses
110°F-160°F
X
X
X
130°F-150°F
X
P3® Polyprep® 2615™ Cleaner
X
2%-5%
X
130°F-150°F
X
Citric Acid
X
2%-5%
Phosphoric
Acid
2%-5%
X
Surface
Modifier
PhosphateFree
X
P3® Polyprep® 3293™ Cleaner
Products
Mild Steel
Etch
Liquid
Contents
Operating
Temperature
Temperature
Solution
Modifier
Application/System
Concentration
(% by volume)
Our extensive line of chemical
specialty products ranges from
plastic cleaners to paint strippers
that are designed to treat, clean
and maintain working areas,
equipment and assembly surfaces.
Our chemists have developed
technologies that make your
working environment safer, cleaner
and more productive. We are
leading green initiatives to lower
carbon footprint, reduce VOCs,
eliminate solvents and develop
HAPS-free chemistries. Whether
you need floor cleaner or paint
line purge solutions, our chemical
specialties product line has
you covered.
Spray
Chemical
Specialties
Chemical Specialties
Cleaners
P3 Polyprep 110™ Cleaner
®
®
NEW!
X
X
X
X
Rinse Aids
P3® Polyprep® Rinse 400™
X
0.03%-0.07%
70°F-110°F
X
X
P3® Polyprep® Rinse 205™
X
0.15%-0.35%
70°F-110°F
X
X
X
X
P3® Polyprep® 110™ Cleaner – A low temperature, phosphate-free plastics cleaner designed for
plastics pretreatment process prior to paint. Minimizes utility costs such as energy and
water consumption.
P3® Polyprep® 3293™ Cleaner – Phosphate containing (acid) – An acidic cleaner formulated primarily
for cleaning plastic surfaces.
P3® Polyprep® 2615™ Cleaner – Phosphate-free (acid) – An acidic cleaner formulated primarily for
phosphate-free cleaning of plastic surfaces.
P3® Polyprep® Rinse 400™ – Designed for use after plastic cleaning in plastic pretreatment
operations and assists in the displacement and removal of solids-laden water, thereby minimizing
water spotting on cleaned plastic and painted plastic parts.
P3® Polyprep® Rinse 205™ – Specially designed for use on Thermal Plastic Olefin (TPO) after plastic
cleaning in plastic pretreatment operations, and assists in the displacement and removal of solidsladen water, thereby minimizing water spotting on cleaned plastic and painted plastic parts.
Purge and Line Cleaners
Water
Reducable
VOC (H,M,L)
Characteristics
Operating
Temperature
Temperature
General Soil
Cleanup
X
Waterborne
Paint
X
Solventborne Paint
Wipe
Products
Pressure Pot
Application/System
X
ambient-130°F
X
L
ambient-130°F
X
L
Purge Solvent
P3® Parcosol® 577WB™
X
Line Cleaner
P3® 200WB™ Paint Line Cleaner
X
X
X
P3® Parcosol® 577WB™ – This HAPs-free, low-VOC, water-soluble proprietary activator/amine
purge blend, used for internal and external cleaning of waterborne paint application equipment,
is the next generation of Parcosol® 277WB™. Very effective at removing wet, semi-dry and dry
waterborne paint from bell or air-atomized paint delivery equipment.
P3® 200WB™ Paint Line Cleaner – Used for cleaning internally the re-circulating paint lines for
waterborne and solvent-borne paint systems and specially developed to be compatible with all
types of Viton seals.
40
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
1 hour
5.5-6.0
ambient
P3® 2486™ Peelable Masking
X
X
1 hour
5.5-6.0
ambient
P3® 2498™ Peelable Masking
X
X
1 hour
6.0-8
ambient
X
P3® Clear Masking 2484™
X
X
NA
as needed
ambient
X
ambient
L
M
L
M
L
X
H
L
X
X
H
L
Water
Removable
M
Clear
Grey
VOC (H, M, L)
X
Viscosity
(H, M, L)
X
White
Wet Mil
Applied
P3® 2474™ Peelable Masking
Products
Operating
Temperature
Dry Time
Characteristics
Roll or Brush
Temperature
Spray
Application/System
Products
Paint Booth Products
Maskings
Baffle Coating
P3® Baffle Coating 2451™
X
X
NA
8-10
Chemical
Specialties
X
X
Cold Strippers
P3® 110™ Cold Stripper
X
X
NA
as required to remove paint
X
X
H
H
P3® 200WB™ Stripper
X
X
NA
as required to remove paint
X
X
H
L
P3® 2474™, 2486™ and 2498™ Peelable Masking – Water-based and solvent-based peelable protective coatings used for temporary
protection of parts, spray booths and equipment.
P3® Clear Masking 2484™ – This water-based transparent masking forms a tacky, clear coating designed to maximize the trapping of
dust, dirt and other airborne debris, while not altering the appearance of the original substrate.
P3® Baffle Coating 2451™ – This water-resistant, grease-type product is formulated for application to baffles, back sections, stacks,
underbooth areas and other locations where a greasy coating is desired to prevent adhesion of paint overspray.
P3® 110™ Cold Stripper – This solvent-based, thickened paint stripper for removing uncured paint from the walls, windows, grates, and
floors of spray booths and paint rooms is also effective in the removal of heavy paint build-up.
P3® 200WB™ Stripper – A water-based thickened paint stripper for removing uncured paint from walls, windows, grates, and floors of
spray booths and paint rooms. Effective in the removal of heavy paint build-up.
Specialized Cleaners
X
ambient-130°F
X
X
ambient
VOC (H, M, L)
Water
Reduceable
X
Operating
Temperature
X
X
Characteristics
General Soil
Cleanup
X
X
Temperature
E-Coat
System
X
Waterborne
Paint
Mop/Pail
X
Wipe
Scrubber
Products
SolventBorne Paint
Application/System
Floor or General Purpose Cleaner
P3® 116™ Saf-T-Clean
P3® 104™ Saf-T-Clean
X
L
H
P3® Parco® 2280™ Cleanup
X
X
X
X
ambient
X
L
P3® 222™ Rik
X
X
X
X
ambient
X
L
X
X
X
X
ambient-130°F
X
X
X
ambient
P3® 2226™ Maintenance Cleaner
P3® Parcosol® 283™ Wipes
NEW!
L
H
System Cleaners
P3® 2250UF™ E-Coat Cleaner
X
<150°F
X
P3® 2255™ E-Coat Cleaner
X
<150°F
X
P3® 2227A™ Oven Cleaner
X
ambient
L
L
M
P3® 116™ Saf-T-Clean – This low-foaming, low-VOC, paint remover for uncured paint does not contain chlorinated solvent or naphthalene.
P3® 104™ Saf-T-Clean – A low-odor blended solvent for removal of paints and other soils from the floor in the spray booth area of an
automotive assembly plant.
P3® Parco® 2280™ Cleanup – This blue liquid with a mild pleasant aroma is formulated to meet the properties required by automotive and
other industrial general maintenance cleaning needs.
P3® 222™ Rik – This industrial floor cleaner is a slightly alkaline liquid product formulated for the cleaning of dirty floors and used, after
dilution with water, with machine floor scrubbers or mop and bucket.
P3® 2226™ Maintenance Cleaner – This liquid cleaner removes soils from floors, walls, windows, machinery and other hard surfaces.
Designed to leave no visible residue if a water rinse does not follow the cleaning operation.
P3® Parcosol® 283™ Wipes – Solvent impregnated wipes for light to medium cleaning.
P3® 2250UF™ E-Coat Cleaner – A low-VOC, HAPS-free, water-based concentrated cleaner used in ultra filtration or spray wash systems to
remove E-Coat buildup and formulated to minimize foaming while removing uncured cathodic E-Coat buildup.
P3® 2255™ E-Coat Cleaner – A low-VOC, low-foaming, water-based concentrated cleaner for use in a spray-recirculation system and
formulated to minimize foaming while effectively removing uncured cathodic E-Coat buildup.
P3® 2227A™ Oven Cleaner – Especially formulated for removal of E-Coat, primer and topcoat resins, plasticizers and other charred, hardcrusted soils found in the ovens of automotive and general industrial plants.
• A
dditional product offerings are available, see product list on pages 78-79 for descriptions.
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
41
Products
Metalworking
Fluids
Metalworking Fluids
Henkel offers a full line of
metalworking fluids designed to
extend tool life, reduce wastes,
improve quality and increase
throughput. From straight oils
to synthetics, our products for
metal forming, metal removal
and rust prevention contain
necessary additives that meet
the needs of light to heavy duty
industry applications.
Metal Removal
Henkel’s line of high-quality metal removal products for cutting and grinding are
available in a variety of chemistries including synthetics, semi-synthetics, soluble oils
or straight oils.
Synthetic
Multan 9103™ – An oil-rejecting synthetic metal removal fluid that has multiple uses in
today’s manufacturing environment. For use on ferrous alloys only.
®
Multan® 3105™ – An oil-rejecting, synthetic fluid designed for machining, grinding and rollforming ferrous and non-ferrous alloys. It is also suitable for use on brass, copper and
other exotic metals.
Semi-Synthetic
Multan® B-204™ – A semi-synthetic metal removal lubricant with a combination of lubricity
additives and cooling ability for light to moderate applications and is bio-resistant for
applications where lubricity, cooling and finish are critical.
Multan® B-236™ – A low foam, water soluble semi-synthetic fluid designed for machining
and grinding ferrous and aluminum alloys. It is designed for use in areas where soft water
or process requirements make foam difficult to control. Ideal for applications where RO/
DI water is used.
Multan® B-400™ – This semi-synthetic, bio-resistant product can be used in industrial metal
removal applications and is suitable for use on brass, copper and other exotic metals.
Typical applications are machining and grinding of ferrous and aluminum alloys.
Multan® B-414™ – A low foam, water soluble, semi-synthetic fluid designed for machining
and grinding ferrous and non-ferrous alloys. It is designed for use in areas where soft
water or process requirements make foam difficult to control. Its wide applicability makes
it suitable for use on brass, copper and other exotic metals. It is also suitable on harder to
machine alloys such as stainless steel, titanium or inconel.
Soluble Oil
Multan 5600D™ – This all-purpose soluble oil, designed for machining and grinding ferrous
and aluminum alloys provides excellent lubricity for various types of difficult operations.
®
Straight Oil
Multan CR 10™ – This moderate viscosity straight oil with an additive package is useful in
general machining applications such as hobbing, milling or shaping, ranging from steel
gear machining to cutting tool manufacturing.
®
Multan® CR 26™ – This unique composition of corrosion inhibitors, Extreme Pressure (EP)
additives, anti-mist agents and lubricity additives provides a durable straight oil product
for today’s moderate broaching operation.
• A
dditional product offerings are available, see product list on
pages 78-79 for descriptions.
42
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
Metalworking
Fluids
ALUMINUM**
CAST IRON
STEEL
YELLOW (COPPER /
BRASS)**
SUBSTRATE COMPATIBILITY
SULFUR
PHOSPHORUS
TYPICAL
CONCENTRATION
OIL CONTENT
RANGE (%)
PAIL
VISCOSITY - H2O
SOLUBLES (cP), OILS
(SUS @ 100°F)
20
RUST-FREE CONC.
(%) - CAST IRON
CONTAINER SIZE
596262
CONCENTRATE
COLOR
CONTAINER WEIGHT
(KG)
Products
Order Item
Number
EP ADDITIVES
Synthetic
Multan® 9103™
Multan® 3105™
593832
213
DRUM
952802
1258
330 GAL. TOTE
599088
18
PAIL
598807
211
DRUM
596467
1041
275 GAL. TOTE
1052097
18
PAIL
Blue
3
35
0
5%-10%
A
b
A
b
Pale Amber
4
70
0
5%-10%
a
b
a
b
A
B
c
A
B
c
Semi-Synthetic
Multan® B-204™
Multan® B-236™
NEW!
Multan® B-400™
Multan® B-414™
NEW!
1052551
202
DRUM
1052099
1198
330 GAL. TOTE
1052099
18
PAIL
1052099
202
DRUM
1052099
1198
330 GAL. TOTE
706695
18
PAIL
677532
197
DRUM
802380
1180
330 GAL. TOTE
1183211
18
PAIL
1183199
197
DRUM
1183248
1180
330 GAL. TOTE
598193
17
PAIL
Amber
2
200
20-25
5%-10%
X
A
B
c
A
B
c
A
b
A
b
Amber
2
200
20-25
5%-10%
X
A
B
c
A
B
c
A
b
A
b
Amber
2
275
25-30
5%-10%
X
X
a
B
C
b
C
a
B
C
a
B
C
Amber
2
275
25-30
5%-10%
X
X
a
B
C
b
C
a
B
C
a
B
C
a
B
C
a
B
C
b
c
b
c
A
B
A
B
A
B
A
B
Soluble Oil
Multan® 5600D™
594510
192
DRUM
665576
904
275 GAL. TOTE
628510
16
PAIL
Amber
N/A
170
85-90
5%-10%
Straight Oil
Multan® CR 10™
Multan® CR 26™
593816
181
DRUM
820117
1078
330 GAL. TOTE
910772
16
PAIL
910511
174
DRUM
910480
1040
330 GAL. TOTE
Amber
N/A
120
90-95
100%
X
Amber
N/A
220
75-80
100%
X
X
c
c
a
b
a
b
a
b
a
b
A – Highly Recommend for Grinding
a – Recommend for Grinding
B – Highly Recommend for General Machining – Turning, Drilling, Milling, Reaming, Sawing, Cutting
b – Recommend for Medium General Machining – Turning, Drilling, Milling, Reaming, Sawing, Cutting
C – Highly Recommend for General Machining – Threading, Broaching, Deep Hole Drilling, Reaming
c – Recommend for General Machining – Threading, Broaching, Deep Hole Drilling, Reaming
** Individual alloys should be tested prior to recommendation.
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
43
Products
Metalworking
Fluids
Metalworking Fluids
Metal Forming
Synthetic
Multan® F 2004™ – A synthetic compound designed for deep drawing and stamping of ferrous and aluminum alloys. Its
unique composition of corrosion inhibitors, Extreme Pressure (EP) additives and lubricity additives provide a durable
product for today’s moderate to heavy drawing and stamping operations.
Multan® F 4510™ – A chlorinated synthetic stamping fluid designed for press forming of steel alloys. High EP level offers
extreme lubrication in high speed, high heat operations.
Multan® F 4768™ – A chlorine-free synthetic stamping fluid designed for severe press forming of multi-metal alloys. It is
non-staining in the presence of mixed metals.
Multan® F 6740™ – A synthetic based compound designed for forming, punching and machining ferrous to galvanized
alloys. Multan® F 6740™ can also be used on various aluminum and stainless steel alloys.
Multan® F 7270™ – A synthetic compound designed for drawing and stamping of ferrous and aluminum alloys. Excellent
performance in high speed progressive die applications.
Soluble Oil
Multan® F 981ND™ – A versatile chlorinated soluble oil fluid capable of stamping, drawing, machining and grinding both
ferrous and nonferrous alloys. It is not recommended for zinc-coated materials.
Multan® F 985™ – Another versatile soluble oil fluid designed for stamping, drawing, machining and grinding both ferrous
and nonferrous alloys. This material is safe on zinc coated metals and performs well in stainless steel applications.
Oil Base
Multan PL 1439™ – A low VOC lubricant designed for light high-speed stamping. It was designed primarily for fin
stamping, used in the heating, cooling and radiator industry where excellent hydrolytic stability and refrigerant
compatibility is required. Multan® PL 1439™ provides superior performance with low coating weights when used in
conjunction with Henkel’s Appli-Coater® lubricant delivery system.
®
Multan® PL 298™ – An oil based compound designed for tube hydroforming of ferrous and aluminum alloys. Its moderate
viscosity allows for a wide range of additional uses in heavy metal forming operations.
• Additional product offerings are available, see product list on pages 78-79 for descriptions.
44
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
Metalworking
Fluids
ALUMINUM**
STAINLESS STEEL
YELLOW METALS**
PLAIN STEEL
GALVANIZED / ZINC
ALLOY**
SUBSTRATE
SULFUR
PHOSPHOROUS
EP ADDS
CHLORINE
ESTERS
PAIL
FATTY ACIDS
18
TYPICAL DILUTION
CONTAINER SIZE
772350
VISCOSITY (cP)
CONTAINER WEIGHT
(KG)
Products
Order Item
Number
BOUNDARY
Synthetic
Multan® F 2004™
Multan® F 4510™
NEW!
Multan® F 4768™
NEW!
Multan® F 6740™
Multan® F 7270™
NEW!
635811
215
DRUM
598772
1061
275 GAL. TOTE
1063135
20
PAIL
1063134
215
DRUM
1063136
1277
330 GAL. TOTE
1287618
18
PAIL
1287619
214
DRUM
1287654
1273
TOTE
877750
18
PAIL
877749
204
DRUM
877728
1219
330 GAL. TOTE
915862
18
PAIL
915851
209
DRUM
915615
1242
330 GAL. TOTE
596028
18
PAIL
1200
5%-100%
X
8000
5%-50%
X
9000
5%-50%
200
5%-20%
850
20%-100%
X
X
X
X
B
C
X
b
C
X
b
C
X
A
B
A
B
c
X
B
C
X
B
C
b
b
C
C
a
b
c
B
C
b
C
b
C
A
B
a
B
c
b
B
b
C
A
B
a
b
c
c
b
c
C
b
c
Soluble Oil
Multan®
F 981ND™
Multan® F 985™
594617
211
DRUM
822357
1041
275 GAL. TOTE
593248
18
PAIL
594260
200
DRUM
593247
951
275 GAL. TOTE
994017
16
PAIL
765
10%-100%
X
1420
10%-100%
X
X
X
b
c
Oil Base
Multan®
PL 1439™
NEW!
994018
171
DRUM
997935
1018
330 GAL. TOTE
928486
15
PAIL
Multan® PL 298™
928485
181
DRUM
928483
1079
330 GAL. TOTE
55
100%
250
100%
A
X
X
b
b
a
C
b
A
b
a
A
b
b
C
A – Highly Recommend for Light Forming (Stamping, Punching, Piercing)
a – Recommend for Light Forming (Stamping, Punching, Piercing)
B – Highly Recommend for Medium Forming (Heavy Stamping, Bending, Roll Forming, Single Hit Die)
b – Recommend for Medium Forming (Heavy Stamping, Bending, Roll Forming, Single Hit Die)
C – Highly Recommend for Heavy Forming (Deep Drawing, Deep Bending, Tube Bending, Hydroforming, Extruding, Progressive Dies)
c – Recommend for Heavy Forming (Deep Drawing, Deep Bending, Tube Bending, Hydroforming, Extruding, Progressive Dies)
** Individual alloys should be tested prior to recommendation.
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
45
Products
Metalworking
Fluids
Metalworking Fluids
Cleaners with Rust Prevention
SPRAY
IMMERSION
FERROUS
ALUMINUM**
PHOSPHATES
BORATES
160°F +
120°F TO 160°F
PAIL
AMBIENT TO 120°F
18
OIL SPLITTING
CONTAINER SIZE
597978
CLEANER TYPE
CONTAINER
WEIGHT (KG)
Products
Order Item
Number
The unique composition of alkalinity, corrosion inhibitors and surfactants provides a durable lowfoaming, hard water-stable product for today’s light to moderate duty cleaning and protecting needs.
X
X
X
X
X
X
X
X
X
X
Neutral
P3® Neutracare®
5088™
593241
209
DRUM
597779
1031
275 GAL. TOTE
P3® Neutracare®
5175™
598323
18
PAIL
594672
232
DRUM
595719
1134
275 GAL. TOTE
PARCO® CLEANER
220-WB™
772337
18
PAIL
598064
215
DRUM
729030
1052
275 GAL. TOTE
Organic
X
X
Organic
X
X
Organic
X
X
X
X
X
X
X
X
** Individual alloys should be tested prior to recommendation.
P3® Neutracare® 5088™ – A neutral-based cleaner with corrosion inhibitors designed for short-term corrosion
protection on ferrous alloys provides a durable, low-foaming product for moderate-duty corrosion protection.
P3® Neutracare® 5175™ – A phosphated neutral cleaner with in-process corrosion prevention is designed to be
used at a moderate temperature (120°F-160°F). For use on ferrous alloys only.
Parco® Cleaner 220-WB™ – A neutral cleaner used in metalworking applications to split tramp oils, maximize
rust inhibition and foam control. Provides personnel safety with moderate cleaning ability. Suitable on multimetal applications with a wide application bath temperature.
46
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
Metalworking
Fluids
Corrosion Preventatives
49
3%-20%
4 wk
X
X
3 mo
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
NONFERROUS**
Short-Term
CAST IRON
X
STEEL
X
PLASTIC /
CRYSTALLINE
2 wk
METALS
FLUID
3%-20%
OIL
45
TACKY
DIP
In-Process
FILM
WAX
SPRAY
TYPICAL
STORAGE
TIME****
PAIL
TYPICAL
DILUTION
18
% SOLIDS
CONTAINER
SIZE
595486
STORAGE
CONTAINER
WEIGHT (KG)
Products
Order Item
Number
APPLICATION
Synthetic
P3® Prevox 501™
P3® Prevox 505™
594014
236
DRUM
772748
1159
275 GAL. TOTE
596698
18
PAIL
594827
213
DRUM
596594
1051
275 GAL. TOTE
772736
16
PAIL
772735
184
DRUM
761271
908
275 GAL. TOTE
594059
16
PAIL
X
X
Soluble
P3® Prevox 5800™
Extended
99
3%-20%
Oil Base
Multan® PL 101™
P3® Prevox 4141™
594526
179
DRUM
783463
1085
330 GAL. TOTE
879525
14
PAIL
879524
161
DRUM
879523
933
330 GAL. TOTE
Extended
100
100%
6 mo
X
X
Extended
10
100%
6 mo
X
X
X
** Individual alloys should be tested prior to recommendation
Synthetic
P3® Prevox 501™ – A synthetic corrosion inhibitor designed for short-term corrosion protection on ferrous alloys. Its unique composition
provides a durable, low-foaming product for today’s moderate duty corrosion protecting needs.
P3® Prevox 505™ – A synthetic corrosion inhibitor designed for short-term corrosion protection on ferrous alloys. Its unique composition
provides a durable, low-foaming product for today’s moderate duty corrosion protecting needs.
Soluble
P3® Prevox 5800™ – A soluble oil corrosion inhibitor designed for long-term corrosion protection on ferrous and non-ferrous alloys. Its
unique composition provides a durable product for today’s corrosion protecting needs.
Oil Base
Multan® PL 101™ – This highly versatile oil-based product with multiple OEM approvals is used for light forming and can also serve as a
ship out rust preventative.
P3® Prevox 4141™ – This rust inhibiting, solvent-based corrosion inhibitor is designed for extended corrosion protection on ferrous and nonferrous alloys. Its high flash point (143°F) allows for a safer work environment without compromising rust protection.
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
47
Products
Hot Melt
Adhesive Bonding
Hot Melt Adhesive Bonding
Henkel’s robust hot melt adhesive
technologies are suitable for
bonding almost any substrate,
from delicate papers to complex
plastics. Our products range
from polyolefins, EVAs and PSAs
to one-component polyamides
and reactive urethanes. They are
available in a variety of package
types such as tack-free pellets or
pressure sensitive sheets. Henkel
hot melts are easy to apply
using the appropriate application
equipment, from hand rollers to
robotic spray guns.
Order Item
Number
Products
Package
Type
Adhesive Type
Viscosity, cps
HOT MELT ADHESIVES – POLYAMIDES
Macromelt® 6072™
NEW!
1206256
40 lb. Box
Hot Melt Polyamide
750 @ 320°F
185°F (85°C)
Macromelt® 6208S™
539394
Sack
Hot Melt Polyamide
3,200 @ 410°F
310°F (155°C)
Macromelt® 6211™
441523
Sack
Hot Melt Polyamide
2,500 @ 410°F
293°F (145°C)
Macromelt 6239™
515023
Sack
Hot Melt Polyamide
7,000 @ 437°F
280°F (138°C)
Macromelt® 9069™
653794
Sack
Hot Melt Polyamide
3,700 @ 410°F
374°F (190°C)
Macromelt® 2384™
945507
Sack
Hot Melt Polyamide
10,000 @ 437°F
374°F (190°C)
®
Macromelt® TPX
16-192B™
NEW!
685358
Sack
Hot Melt Polyamide
4,200 @ 410°F
342°F (172°C)
Macromelt® TPX 16-333B™
733263
Sack
Hot Melt Polyamide
3,000 @ 374°F
293°F (145°C)
Hyperm™ 34-3412™
1217513
50 lb. Box
Hot Melt Polyamide
4,500 @ 375°F
284°F (140°C)
HOT MELT ADHESIVES – POLYOLEFIN
Technomelt® 80-8795™
1151943
Box
Hot Melt Polyolefin
7,000 @ 350°F
320°F (160°C)
Technomelt® 80-8707™
1151479
Box
Hot Melt Polyolefin
2,900 @ 350°F
290°F (143°C)
Technomelt® 80-8797™
1151482
Box
Hot Melt Polyolefin
2,300 @ 375°F
310°F (155°C)
884120
Drum
787390
Box
Hot Melt Polyolefin
5,500 @ 350°F
290°F (143°C)
1217310
50 lb. Bags
Hot Melt Polyolefin
11,700 @ 350°F
244°F (118°C)
Technomelt® 84-8843™
Filter-Lok® 34-159B™
Listed on and complies with the Canadian Domestic Substances List
48
Softening Point
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
Hot Melt
Adhesive Bonding
Polyamides
Macromelt® 6072™ – A polyamide hot melt adhesive with a low softening point, application temperature and
viscosity. Good oil resistance. Suitable for bonding fabrics, wood, porous substrates and heat sensitive
materials.
Macromelt® 6208S™ – A polyamide hot melt for use in potting and encapsulation applications with good adhesion
to metals and plastics.
Macromelt® 6211™ – A moderate to long open time polyamide hot melt with excellent low temperature flexibility
and good adhesion to plastics. Flammability rating of UL 94 V-0.
Macromelt® 6239™ – A versatile polyamide hot melt with good creep resistance at elevated temperatures and
strong bond strength at low temperatures.
Macromelt® 9069™ – A high melting point, polyamide hot melt with good oil and chemical resistance that is an
excellent adhesive for many filter applications.
Macromelt® 2384™ – A high melting point polyamide hot melt with superior oil and chemical resistance that is
designed for use in fuel and hydraulic filter applications.
Macromelt® TPX 16-192B™ – A high melting point polyamide hot melt with good chemical and moisture
resistance. A standard adhesive for many transportation filter applications.
Macromelt® TPX 16-333B™ – A moderate to long open time polyamide hot melt with good low temperature
flexibility and an excellent product for wood cabinet assembly.
Hyperm™ 34-3412™ – A high temperature resistant, polyolefin-based hot melt adhesive with moderate open time.
Polyolefin
Technomelt 80-8795™ – A high performance, general purpose olefin hot melt with a good balance of extreme
temperature resistance.
®
Technomelt® 80-8707™ – A long open time olefin hot melt with moderate set speed that is designed for bonding
foam-to-foam, corrugated containers, particle board and wood, and has a good balance of heat and low
temperature resistance.
Technomelt® 80-8797™ – A light-colored medium viscosity polyolefin hot melt adhesive. All ingredients are
approved under the Federal Regulation 21 CFR 175.105 for incidental food contact.
Technomelt® 84-8843™ – An olefin hot melt designed to bond difficult substrates such as polyolefins, ABS, wood
and some metals, and has excellent cohesive strength after providing a long open time.
Filter-Lok® 34-159B™ – A polyolefin based hot melt adhesive with moderate open time; used for pleating of
air filters.
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
49
Products
Hot Melt
Adhesive Bonding
Hot Melt Adhesive Bonding
Products
Order Item Number
Package Type
Adhesive Type
Viscosity, cps
Softening Point
Hot Melt EVA
3,000 @ 350°F
170°F (77°C)
Hot Melt EVA
1,000 @ 350°F
230°F (110°C)
Hot Melt EVA
1,100 @ 350°F
230°F (110°C)
HOT MELT ADHESIVES – ETHYLENE VINYL ACETATE
670065
Unitainer
514350
Box
1089736
Supersack
514390
Box
693121
Unitainer
514430
Box
Technomelt® 80-8633™
514499
Box
Hot Melt EVA
1,800 @ 350°F
223°F (106°C)
Technomelt® 80-8804™
552789
Box
Hot Melt EVA
1,150 @ 275°F
175°F (79°C)
Hot Melt EVA
1,700 @ 350°F
172°F (78°C)
Hot Melt EVA
1,150
350°F (177°C)
Hot Melt EVA
970
350°F (177°C)
Hot Melt EVA
1,250
350°F (177°C)
Technomelt® 80-8309™
Technomelt® 80-8368™
Technomelt® 80-8448™
Technomelt® 80-8884™
NEW!
Instant-Lok 34-2635™
®
Ultra-Melt® 34-772C™
987771
40 lb. Box
1222924
50 lb. Box
1217399
1,200 lb. Versibox
1217803
30 lb. Box
1217814
1,000 lb. Binbox
1217409
50 lb. Box
1217375
1,200 lb. Versibox
Filter-Lok® 34-780C™
1217805
1,200 lb. Binbox
Hot Melt EVA
3,500
350°F (177°C)
Kan-Tak® 34-4955™
1222979
25 lb. Boxes
Hot Melt EVA
1,500
350°F (177°C)
Instant-Lok® 34-2631™
Filter-Lok® 34-947C™
NEW!
Uni-Flex™ 34-1214™
Filter-Lok® 34-870C™
Filter-Lok® 34-771C™
Filter-Lok 34-967C™
®
NEW!
NEW!
NEW!
Filter-Lok® 34-412B™
1217927
40 lb. Boxes
Hot Melt EVA
4,500
350°F (177°C)
1217278
50 lb. Box
Hot Melt EVA
2,200
350°F (177°C)
1217669
50 lb. Box
1217872
1,000 lb. Binbox
Hot Melt EVA
1,050
350°F (177°C)
1217800
1,200 lb. Binbox
Hot Melt EVA
1,700
350°F (177°C)
1217938
50 lb. Box
Hot Melt EVA
3,500
350°F (177°C)
1217552
50 lb. Box
Hot Melt EVA
6,500
350°F (177°C)
3,800
350°F (177°C)
3,250
350°F (177°C)
Hot Melt PSA
17,500 @ 325°F
245°F (118°C)
Hot Melt PSA
18,000 @ 350°F
220°F (104°C)
Hot Melt PSA
725 @ 300°F
200°F (93°C)
®
Instant-Lok 34-2787™
1217457
50 lb. Box
Hot Melt Co-Polymer:
EVA / Rubber
Instant-Lok® 34-342B™
1222961
50 lb. Box
Hot Melt Co-Polymer:
EVA / Rubber
HOT MELT ADHESIVES – PRESSURE SENSITIVE
Technomelt® 80-8697™
Technomelt® 86-8845™
Technomelt® 86-8848™
NEW!
514534
Box
621750
Box
884580
Drum
865526
Box
1059364
Drum
1124599
Box
Technomelt® Q 80-8668™ N E W !
1151472
Box
Hot Melt PSA
36,000 @ 350°F
284°F (140°C)
Macromelt® Q 5613™
1153925
Box
Hot Melt PSA
1,200 @ 350°F
176°F (80°C)
Technomelt® EM-357US™
568396
Box
Hot Melt PSA
850 @ 300°F
162°F (72°C)
Technomelt® EM-377US™
644304
Box
Hot Melt PSA
6,500 @ 325°F
192°F (89°C)
884105
Drum
1009402
Box
Hot Melt PSA
2,800 @ 300°F
170°F (77°C)
1217608
25 lb. box
Hot Melt Polyolefin
800 @ 350°F
270°F (132°C)
Sanicare® 86-7110™
Versa-Weld™ 34-491C™
Listed on and complies with the Canadian Domestic Substances List
50
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
Hot Melt
Adhesive Bonding
Ethylene Vinyl Acetate
Technomelt® 80-8309™ – A flexible hot melt for applications such as furnace air filters that has non-blocking characteristics, excellent hot tack, heat
stability and can be heat reactivated.
Technomelt® 80-8368™ – A medium viscosity hot melt for applications requiring a broad adhesion window with good hot tack, fast set speed and medium
to short open time.
Technomelt® 80-8448™ – A temperature robust, medium viscosity, general purpose hot melt formulated for applications such as filter assembly and case
and carton sealing that has excellent hot tack and fast setting speed.
Technomelt® 80-8633™ – A general purpose, medium viscosity hot melt adhesive for filter assembly and packaging applications. Good hot tack range for
longer open time needs with fast set speeds.
Technomelt® 80-8804™ – A low application temperature hot melt with high thermal stability and good low temperature properties.
Technomelt® 80-8884™ – A medium viscosity EVA-based hot melt adhesive with a long open time. Ideal for bonding paper framing material for filters. All
ingredients approved for incidental food contact under Federal Regulation 21 CFR 175.105.
Instant-Lok® 34-2635™ – An EVA-based hot melt adhesive with short open time, specially formulated for bonding paper framing material for HVAC filters.
Ultra-Melt® 34-772C™ – An EVA-based hot melt adhesive with fast open time, specially formulated for bonding paper framing material for HVAC filters.
Instant-Lok® 34-2631™ – An EVA-based hot melt adhesive with moderate open time, specially formulated for bonding paper framing material for
HVAC filters.
Filter-Lok® 34-780C™ – A medium viscosity, reactivatable EVA-based hot melt adhesive with fast open time for use in the assembly of filters.
Kan-Tak™ 34-4955™ – An EVA-based hot melt adhesive for use in the assembly of wire mesh to filter element material.
Filter-Lok® 34-947C™ – A white, EVA-based hot melt adhesive with a long open time; ideally suited for potting applications.
Uni-Flex™ 34-1214™ – An EVA-based hot melt adhesive with very good adhesion to ABS plastic. Well suited for filter mini-pleat, face-welding applications.
Filter-Lok® 34-870C™ – A fast open time, low viscosity EVA-based hot melt adhesive for air filter pleating and mini-pleating applications.
Filter-Lok® 34-771C™ – A fast open time, low-medium viscosity EVA-based hot melt adhesive for air filter pleating and mini-pleating applications.
Filter-Lok® 34-967C™ – A fast open time, medium viscosity EVA-based hot melt adhesive for air filter pleating and mini-pleating applications.
Filter-Lok® 34-412B™ – A fast open time, medium-high viscosity EVA-based hot melt adhesive for air filter pleating and mini-pleating applications.
Instant-Lok® 34-2787™ – A moderate open time, co-polymer hot melt adhesive; ideal for wire mesh filter bonding and general potting applications. Good
adhesion to plastics.
Instant-Lok® 34-342B™ – A lower viscosity version of Instant-Lok® 34-2787™.
Pressure Sensitive
Technomelt® 80-8697™ – A general purpose PSA hot melt designed for use in pre-applied applications with good adhesion to a variety of substrates
including plastics.
Technomelt® 86-8845™ – A permanent PSA hot melt designed as an aggressive high performance assembly system with high heat resistance and good
peel and shear resistance.
Technomelt® 86-8848™ – A pressure sensitive hot melt adhesive designed as a foam-in-place gasket/sealing material. It exhibits superior foam structure
at density reduction levels of 60%.
Technomelt® Q 80-8668™ – A high viscosity, permanent pressure-sensitive hot melt adhesive for applications that require high peel, shear and heat
resistance. Provides high tack and good green strength. All ingredients approved for incidental food contact under Federal Regulation 21 CFR 175.105.
Macromelt® Q 5613™ – A low viscosity, general purpose PSA hot melt. Low residual tack. Excellent for foam and mattress assembly.
Technomelt® EM-357US™ – A low viscosity, high performance PSA hot melt with aggressive tack and excellent flexibility.
Technomelt® EM-377US™ – A medium viscosity, high performance PSA hot melt with aggressive tack and excellent flexibility.
Sanicare® 86-7110™ – A general purpose pressure-sensitive hot melt.
Versa-Weld™ 34-491C™ – A low-viscosity, sprayable, semi-pressure sensitive hot melt adhesive with good heat resistance. Long open time. UL approved.
Widely used for lamination of facings to glass insulation mat.
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
51
Products
Hot Melt
Adhesive Bonding
Hot Melt Adhesive Bonding
Products
Order Item
Number
Package
Type
Adhesive Type
Viscosity, cps
Open Time
POLYURETHANE REACTIVE HOT MELT ADHESIVES
Purmelt® R-623™
1093047
Pail
Polyurethane Hot Melt
12,000 @ 250°F
7-8 minutes
Purmelt® R-629™
1102692
Drum
Polyurethane Hot Melt
12,000 @ 250°F
5 minutes
515224
Drum
555170
Pail
Polyurethane Hot Melt
12,000 @ 250°F
4-5 minutes
1338015
Pail
1338014
Drum
Polyurethane Hot Melt
20,000 @ 250°F
4-6 minutes
1338013
2 kg Slugs
1223189
Drum
Polyurethane Hot Melt
13,000 @ 250°F
4-5 minutes
1223173
Pail
1223168
Drum
Polyurethane Hot Melt
13,000 @ 250°F
4-5 minutes
1226169
Fibrecycle Keg
1132877
Drum
1018932
Pail
Polyurethane Hot Melt
9,000 @ 250°F
4 minutes
1139456
Drum
1139458
Pail
Polyurethane Hot Melt
12,000 @ 250°F
3-4 minutes
Polyurethane Hot Melt
12,000 @ 250°F
3-4 minutes
Polyurethane Hot Melt
11,000 @ 275°F
3-4 minutes
Polyurethane Hot Melt
20,000 @ 250°F
2-4 minutes
Purmelt® QR-4663™
Purmelt® R-200F+™
NEW!
*Purmelt® 91-913A™
*Purmelt® 91-798A™
Purmelt® R-607™
Purmelt® R-630™
733271
Drum
1009404
Pail
1223178
Pail
1223174
Drum
1276038
Fibrecycle Keg
1219449
Pail
1219448
Drum
*Purmelt® 91-831B™
1219495
Drum
Polyurethane Hot Melt
25,000 @ 250°F
3-4 minutes
Purmelt® R-246C™
737463
Drum
Polyurethane Hot Melt
12,000 @ 250°F
2 minutes
1062313
Drum
837562
Pail
Polyurethane Hot Melt
9,000 @ 250°F
50 seconds
897796
2 kg Slugs
Polyurethane Hot Melt
44,000 @ 266°F
30 seconds
Polyurethane Hot Melt
10,000 @ 250°F
1-2 minutes
Polyurethane Hot Melt
10,000 @ 275°F
1-2 minutes
Purmelt® QR-4668™
*Purmelt® 91-834A™
*Purmelt® 91-194B™
Purmelt® R-608C™
Purmelt® R-633™
NEW!
*Purmelt® 91-004A™
Purmelt® Purfect Glaze 91-822A™
1153895
Pail
1262696
Pail
1262692
Drum
1219493
Drum
1219494
Pail
Purmelt® Purge 34-3182™
1217501
Steel Drum
Hot Melt
4,600 @ 250°F
N/A
Purmelt® Purge 34-268D™
1217245
Fiber Drum
Hot Melt
4,600 @ 250°F
N/A
Purmelt® Cleaner 2
245517
Sack
Cleaner
6,500 @ 266°F
N/A
Purmelt® Cleaner 34-785A™
1217808
Drum
Cleaner
Flake at RT
N/A
Listed on and complies with the Canadian Domestic Substances List
* Formerly branded as Pur-Fect Lok®. Name change only. New labels to appear starting September 2009.
52
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
Hot Melt
Adhesive Bonding
Reactive Polyurethanes
Long Open Time
Purmelt® R-623™ – Longest open time. Good for large panel laminations. Sprayable.
Purmelt® R-629™ – High temperature resistance. General purpose panel lamination. Good initial tack.
Purmelt® QR-4663™ – A high green strength, aggressive tack product for panel lamination and quick
fixturing of components to plastic.
Purmelt® R-200F+™ – A high heat resistant adhesive for panel assembly.
*Purmelt® 91-913A™ – A UL approved, clear polyurethane-based hot melt adhesive; well suited for
bonding fiberglass to sheet metal, such as RV sidewalls.
*Purmelt® 91-798A™ – General purpose lavender adhesive for panel lamination like RV sidewalls.
Good machining characteristics.
Medium Open Time
Purmelt R-607™ – Low viscosity general lamination grade with good machining, less stringing and
stability on roll coater.
®
Purmelt® R-630™ – High green strength and good general purpose application.
Purmelt® QR-4668™ – Panel lamination grade with good green strength.
*Purmelt® 91-834A™ – High green strength panel laminating adhesive.
*Purmelt® 91-194B™ – High green strength for smaller panels.
*Purmelt® 91-831B™ – High green strength with higher viscosity for better initial tack.
Fast Open Time
Purmelt® R-246C™ – Excellent adhesion to hard-to-bond substrates like plastics, metals
and aluminum.
Purmelt® R-608C™ – Very short open time and fast setting. Good adhesion to flexible substrates.
Available in 4 lb. slugs.
Purmelt® R-633™ – A fast-setting, very high green strength adhesive with short open time. Provides
excellent adhesion to synthetic materials, rubber and foam. Not recommended for roll coating.
*Purmelt® 91-004A™ – Fast setting for filter media bonding.
Purmelt® Purfect Glaze 91-822A™ – A high green strength, short open-time polyurethane hot melt
with excellent UV stability and adhesion to glass.
Purges
Purmelt® Purge 34-3182™ – Low viscosity hot melt for flushing unloading equipment lines.
Purmelt® Purge 34-268D™ – Low viscosity hot melt for flushing unloading equipment lines.
Cleaners
Purmelt® Cleaner 2 – Cleaning solution for flushing unloading equipment pumps and hoses.
Purmelt® Cleaner 34-785A™ – Cleaning agent for removing adhesive from applicator rolls.
* Formerly branded as Pur-Fect Lok®. Name change only. New labels to appear starting September 2009.
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
53
Products
Structural
Bonding
Structural Bonding
Panel assembly is now even
easier with the new Macroplast®
UR-8340™ series of onecomponent moisture cure urethane
adhesives – our next generation
alternative to the SIA-110™ series.
Improvements include better wetout of the adhesive on multiple
surfaces and higher bond strength
on aluminum and other metals.
Liquid Moisture Cure Polyurethanes
Long Open Time
Macroplast UR-8340™ – High strength, thermoset liquid moisture cure adhesive for panel
lamination. Slow cure speed.
®
Macroplast® UR-8341™ – High strength, thermoset liquid moisture cure adhesive for panel
lamination. Slow cure speed.
Macroplast® UR-8342™ – High strength, thermoset liquid moisture cure adhesive for panel
lamination. Slow cure speed.
Medium Open Time
Macroplast® UR-8343™ – High strength, thermoset liquid moisture cure adhesive for panel
lamination. Medium cure speed.
Macroplast® UR-8344™ – High strength, thermoset liquid moisture cure adhesive for panel
lamination. Medium cure speed.
Macroplast® UR-8345™ – High strength, thermoset liquid moisture cure adhesive for panel
lamination. Medium cure speed.
Macroplast® UR-8345D™ – Red colored, high strength, thermoset liquid moisture cure adhesive
for panel lamination. Medium cure speed
Fast Open Time
Macroplast UR-8346™ – High strength, thermoset liquid moisture cure adhesive for panel
lamination. Fast cure speed.
®
Macroplast® UR-8347™ – High strength, thermoset liquid moisture cure adhesive for panel
lamination. Very fast cure speed.
Macroplast® UR-8348™ – High strength, thermoset liquid moisture cure adhesive for panel
lamination. Very fast cure speed.
Macroplast® UR-8349™ – High strength, thermoset liquid moisture cure adhesive for panel
lamination. Very fast cure speed.
54
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
Viscosity,
cps @ 72°F
Open Time
1K Liquid PUR
5,000
110 minutes
1K Liquid PUR
5,000
38 minutes
1K Liquid PUR
5,000
30 minutes
1K Liquid PUR
5,000
22 minutes
1K Liquid PUR
5,000
13 minutes
1K Liquid PUR
5,000
12 minutes
1K Liquid PUR
5,000
12 minutes
1K Liquid PUR
5,000
7 minutes
1K Liquid PUR
5,000
6 minutes
1K Liquid PUR
5,000
170 seconds
1K Liquid PUR
5,000
60 seconds
Adhesive
Type
Package
Type
Order Item
Number
Structural
Bonding
Products
Liquid Moisture Cure Polyurethanes
Macroplast® UR-8340™
Macroplast® UR-8341™
Macroplast® UR-8342™
Macroplast® UR-8343™
Macroplast® UR-8344™
Macroplast® UR-8345™
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
Macroplast® UR-8345D™
NEW!
Macroplast® UR-8346™
NEW!
Macroplast® UR-8347™
Macroplast® UR-8348™
Macroplast® UR-8349™
NEW!
NEW!
NEW!
1252516
Tote
1252515
Drum
1252520
Pail
1252531
Tote
1252532
Drum
1252534
Pail
1252536
Tote
1252535
Drum
1252537
Pail
1252984
Tote
1252538
Drum
1252539
Pail
1252542
Tote
1252540
Drum
1252541
Pail
1252544
Tote
1252543
Drum
1252545
Pail
1321862
Tote
1252547
Tote
1252546
Drum
1252548
Pail
1252550
Tote
1252549
Drum
1252551
Pail
1252533
Tote
1252572
Drum
1252519
Pail
1252517
Tote
1252518
Drum
1252360
Pail
Listed on and complies with the Canadian Domestic Substances List
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
55
Products
Structural
Bonding
Structural Bonding
One-Component Liquid Polyurethanes
Long Open Time
Macroplast SIA-110™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Slow cure speed. Red
color available.
®
Macroplast® SIA-111™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Slow cure speed. Red
color available.
Medium Open Time
Macroplast® SIA-113SHV™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure
speed.
Macroplast® UR 8224S™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed.
Macroplast® SIA-114™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed.
Red color available.
Macroplast® SIA-115™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed.
Red color available.
Fast Open Time
Macroplast SIA-116™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Fast cure speed.
®
Macroplast® SIA-117™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Very fast cure speed.
Macroplast® SIA-119™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Very fast cure speed.
Macroplast® UR-8229L™ – High strength, thermoset liquid moisture cure adhesive for panel lamination. Very fast cure speed
and has UL certification for metal doors.
Plastic Bonding
Macroplast® UR-8331™ – Plastic bonding adhesive for replacement of solvent PURs.
Macroplast® UR-8332™ – Plastic bonding adhesive for replacement of solvent PURs.
Two-Component Liquid Polyurethanes
Macroplast UK-8103™ & UK-5400R™ – A two-component adhesive system for bonding panel composites, including hard
foams to metal. Also can be used for potting applications.
®
Macroplast® UK-1340™ – A high viscosity, 2K structural adhesive for composite plastics bonding in wind blades.
GL® Certified product.
Macroplast® UK-5401™ – A high viscosity, 2K structural adhesive for composite plastics bonding in wind blades.
GL® Certified product.
GL is a trademark of Germanischer Lloyd.
56
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
Typical
Viscosity, cps
@ 72°F
Typical
Open Time
1K Liquid PUR
5,000
110 minutes
1K Liquid PUR
5,000
38 minutes
1K Liquid PUR
7,000
22 minutes
1K Liquid PUR
7,000
17 minutes
1K Liquid PUR
5,000
13 minutes
1K Liquid PUR
5,000
12 minutes
1K Liquid PUR
5,000
7 minutes
1K Liquid PUR
5,000
6 minutes
1K Liquid PUR
5,000
170 seconds
1K Liquid PUR
5,000
100 seconds
1K Liquid PUR
12,000
45 minutes
1K Liquid PUR
16,000
30 minutes
2K Liquid PUR
Mixture 9,000
55 minutes
Adhesive
Type
Package Type
Order Item
Number
Structural
Bonding
Products
Liquid Moisture Cure Polyurethanes
Macroplast® SIA-110™
Macroplast® SIA-111™
Macroplast® SIA-113SHV™
Macroplast® UR 8224S™
Macroplast® SIA-114™
Macroplast® SIA-115™
Macroplast® SIA-116™
Macroplast® SIA-117™
Macroplast® SIA-119™
Macroplast® UR-8229L™
Macroplast® UR-8331™
Macroplast® UR-8332™
7909039
Tote
799053
Drum
1038105
Pail
861051
Tote
1021284
Drum
1050111
Pail
804148
1038104
Tote
Pail
515525
Drum
1048865
Pail
804582
Tote
843971
Drum
1048864
Pail
805205
Tote
805204
Drum
1059363
Pail
805711
Tote
1047788
Pail
805713
Tote
981885
Drum
1019888
Pail
861052
Tote
1019887
Pail
644301
Tote
1062312
Pail
1162783
Tote
1162477
Drum
1145614
Tote
1139761
Pail
Two-Component Liquid Polyurethanes
Macroplast® UK-8103™ &
NEW!
UK-5400R™
Macroplast® UK-1340™
Macroplast® UK-5401™
NEW!
NEW!
176884
5 gal. Pail –
UK-8103™
515496
5 gal. Pail –
UK-5400R™
TBD
Drum
2K Paste PUR
300,000
2 hours
TBD
Drum
2K Paste PUR
300,000
2 hours
Listed on and complies with the Canadian Domestic Substances List
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
57
Products
Structural
Bonding
Structural Bonding
The Teroson® line of structural
adhesives makes designers’,
engineers’ and manufacturing
processors’ lives easier and less
complicated. From fracture-toughened
structural adhesives that eliminate
welding to hem flange adhesives for
bonding inner and outer shells, our
complete line of industrial adhesives
have the integrity to handle your
applications. Teroson® branded
products meet OEM specifications
designed to maintain system integrity
while providing manufacturing
process flexibility. These high
performance products are used in
component fabrication and assembly
plants prior to paint shops, and are
compatible with pretreatment and
paint process chemistries.
One-Component Epoxies
Terokal® 2300™ – This one-component, heat cure, structural adhesive is 50% expandable for
stiffening and joining applications, and has limited fracture toughness. Can be applied directly
to oily substrates.
Terokal® 2400™ – An epoxy-based, heat cure, expandable, wash resistant, structural adhesive
for use in Body-In-White to improve stiffness, reduce spot weld requirements, or join metal
where spot welds are not practical. Increases vehicle rigidity.
Terokal® 3005™ – This one-component, solvent-free, induction-curable, structural resin is used
for hem flange bonding applications where low peel and impact forces are encountered. Has
induction curable capabilities to achieve very short fixture times, can be cured in a standard
oven and applied directly to oily substrates.
Terokal® 4555B™ – This one-component, solvent-free, impact-resistant, heat-curable structural
resin is a workhorse for vehicle stiffening applications, as well as an all-around adhesive with
good toughness and high peel resistance. Can be applied directly to oily substrates.
Terokal® 5011™ – This one-component, solvent-free, impact-resistant, heat-curable, 100%
expandable version of Terokal® 4555B™ is for applications with uneven joint gap thickness.
Can be applied directly to oily substrates.
Terokal® 5089™ – A high performance, impact-resistant, one-component, heat-curable, epoxybased structural adhesive that can be spot-welded through. Exhibits excellent strength and
corrosion resistance at temperature extremes and after extensive aging and weathering.
Eccobond® A-316-30™ – A one-component, non-sag, heat cured, epoxy adhesive with excellent
thermal stability up to 350°F and resistance to water and many aggressive chemical fluids.
Excellent adhesion to most metal surfaces. Well-suited for aerospace filters requiring hi-temp.
Skydrol® resistance.
Eccobond® A-329-1™ – A one-component, non-sag, heat cured, epoxy adhesive with excellent
thermal stability up to 350°F, and resistance to water and many aggressive chemical fluids.
Excellent adhesion to most metal surfaces. Well-suited for aerospace filters requiring hi-temp.
Skydrol® resistance.
Eccobond® A-359™ – A one-component, non-sag, heat cured, high strength epoxy adhesive
with excellent thermal stability up to 350°F, and resistance to water and solvents. Excellent
adhesion to most metal surfaces. Well-suited as a brazing replacement for HVAC tube
assemblies.
58
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
Cure Time/Temp @
PMT (Peak Metal
Temperature). Cure
rates may vary
depending on time
and temperature.
Shear Strength CRS
T-Peel CRS
Impact Resistance
CRS
Approvals
Black
CRS, HDG, EG,
Galvanneal
80,000
>20 minutes at
160°C
2,000 psi
25 pli
60
inch/lbs.
DaimlerChrysler
MS-CD457 Type B
1072897
1076983
1072467
1076981
Drum
1/2 Drum
Pail
Cartridge
256 kg
128 kg
20 kg
12 pack
1K
Epoxy
Black
CRS, HDG, EG,
Galvanneal, Al
180,000
>20 minutes at
160°C
2,000 psi
25 pli
60
inch/lbs.
889239
595663
913557
Drum
Pail
Cartridge
273 kg
21 kg
12 pack
1K
Epoxy
Green
CRS, HDG, EG
70,000
>15 minutes at
170°C
10 Mpa
•
•
Ford
WSSM 2G300A2
722150
965871
913559
Drum
Pail
Cartridge
227 kg
18 kg
12 pack
1K
Epoxy
Black
CRS, HDG,
EG, Al
90,000
>15 minutes at
160°C
20 Mpa
10 N/mm
20 N/mm
Ford
WSBM 2G388 A
GM 998-2281
GM 3639M
910474
621423
910474
897473
Drum
Pail
1/2 Drum
Cartridge
232 kg
24 kg
116 kg
12 pack
1K
Epoxy
Black
CRS, HDG,
EG, Al
90,000
>15 minutes at
160°C
17 Mpa
5 N/mm
10 N/mm
Ford
WSBM 2G411A
GM 998-2281
GM 3639M
1182927
1253838
1182761
Drum
Pail
1/2 Drum
220 kg
19 kg
110 kg
1K
Epoxy
Purple
CRS, HDG,
EG, Al
100,000
at 50°C
>10 minutes at
155°C
20 Mpa
>100 N/
25mm
25 N/mm
Eccobond®
A-316-30™
1219097
5 Gal. Pail
–
1K
Epoxy
Grey
Metals
Paste
>10 minutes
320°F
2,200 psi
5 pli
Western Filter
Eccobond®
A-329-1™
1215360
1215359
1 Quart
5 Gal. Pail
–
1K
Epoxy
Beige
Metals
Paste
>10 minutes
320°F
2,000 psi
3 pli
GE
Eccobond®
A-359™
1215366
1215365
1215364
305 ml Cartridge
12 Oz. Cartridge
5 Gal. Pail
–
1K
Epoxy
Grey
Metals,
Thermoset
Plastics
Paste
>5 minutes at
160°C
3,300 psi
5 pli
Brookfield
Centasise cPs
1K
Epoxy
Substrates
Package Weight
210 kg
23 kg
12 pack
105 kg
Color
Package Type
Drum
Pail
Cartridge
1/2 Drum
Base Chemistry or
Cure System
Order Item Number
Structural
Bonding
887561
887651
888331
1061206
Products
One-Component Epoxies
Terokal® 2300™
NEW!
Terokal® 2400™
NEW!
Terokal® 3005™
NEW!
Terokal® 4555B™
NEW!
Terokal® 5011™
NEW!
Terokal® 5089™
NEW!
•
GE, Borg Warner
• = Product has not been evaluated for this performance property.
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
59
Products
Elastomeric
Bonding & Sealing
Elastomeric Bonding
& Sealing
Terostat® MS elastomeric
adhesives and sealants are
moisture curing, salinemodified polymers that provide
strong, resilient bonds to many
substrates – all without the
need for a primer. Terostat® MS
products are isocyanate and
solvent free, noncorrosive, and
compatible with most paint
systems. Once fully cured, these
high-performance elastomers
provide excellent weathering and
aging resistance.
60
Terostat® MS 930™ – Soft, elastic sealant for seam and joint sealing; used in railway and
container manufacture and HVAC applications.
Terostat® MS 935™ – Elastic one-component sealer with excellent adhesion to many substrates;
balance of elastomeric and adhesive properties.
Terostat® MS 939™ – Combination of high elongation and high tensile strength. It has good
adhesion to many substrates, as well as good impact and peel resistance.
Terostat® MS 9360™ – Designed for elastic bonding and sealing of both painted and un-painted
metal substrates; one-component.
Terostat® MS 9380™ – High tensile strength and high hardness elastomeric product; used in
adhesive bonding applications subject to harsh environmental conditions.
Terostat® MS 9399™ – A two-part adhesive system ideal for use when the curing rate of one-part
adhesives is too slow, such as in deep channels, or where moisture cannot penetrate to cure.
Parts A & B have a 1:1 mix ratio and create a sealant that is non-sagging, has high initial tack
and fast set time.
Terostat® MS 9371™ – A curing rate accelerant used in conjunction with various grades of
Terostat® brand MS sealants, such as MS 930™ and MS 939™; hastens curing throughout
the depth of the applied bead; mixed in a 10:1 ratio using metering system or plural
dispensing static mix caulking guns.
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
Elastomeric
Bonding & Sealing
Products
Terostat®
MS 930™
Terostat®
MS 935™
Terostat®
MS 939™
Terostat®
MS 9360™
Terostat
MS 9380™
®
Terostat
MS 9399™
®
Application
Type
Sealing
Sealing
Bonding
Bonding
Bonding
Bonding
Item
Number
264872
310 ml cartridge
White
310 ml cartridge
Grey
261896
310 ml cartridge
Black
237971
250 kg drum
Black
251696
310 ml cartridge
Grey
1228525
25 kg pail
Grey
192487
310 ml cartridge
Black
146063
25 kg pail
Black
97325
310 ml cartridge
White
238156
250 kg drum
White
99164
310 ml cartridge
Grey
100146
310 ml cartridge
Black
388927
25 kg pail
Black
504842
250 kg drum
Black
101134
310 ml cartridge
Black
193856
25 kg pail
Black
100149
310 ml cartridge
White
113048
250 kg drum
White
964329
400 ml dual
cartridge
Black
250 kg drum
Black
250 kg drum
Black
757439
Component A
757440
Accelerator
Color
100139
Component B
Terostat®
MS 9371™
Pkg Size
700910
25 kg pail
Neutral
Viscosity
Shore A
Hardness
Thixotropic
Paste
30
Cure Rate
Tensile
Skinover
Elongation
Service
(mm/
Strength
(min.)
at Break Temperature
24 hrs.)
(MPa)
4
25 – 40
1.0
250%
Test Certificates
-50°C up to
+80°C
FDA Status
Germanischer Lloyd
(sensoric test)
BSS 7239
Thixotropic
Paste
50
3
10 – 15
2.8
230%
-40°C up to
+100°C
Sensoric test acc. to
DIN 10955
Declaration of no objection
acc. to ISEGA
DIN 1846 fungus resistance
UL 94HB
Thixotropic
Paste
55
3
10
3.0
250%
-40°C up to
+100°C
UL Listed
Thixotropic
Paste
> 50
3
10
3.5
200%
-40°C up to
+100°C
ASTM E 662
ASTM E 162
BSS 7239
Thixotropic
Paste
> 65
3
5 – 10
4.0
120%
-40°C up to
+100°C
Germanischer Lloyd
(elastomeric adhesive)
TwoPart 1:1
Thixotropic
Paste
60
Unlimited
30
3.0
150%
-40°C up to
+100°C
NF P 92507, M1
NF F 16-101
10:1 Mix
Ratio
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
61
Products
Potting, Molding
& Encapsulating
Potting, Molding
& Encapsulating
Potting and encapsulating
compounds are used to fill large
voids and provide mechanical
reinforcement to housed or
unitized assemblies, as well as
to protect components from the
effects of exposure to chemicals,
moisture, mechanical shock, and
vibration. Sealing components
with potting and encapsulating
compounds prevents corrosion
and ensures long-term
integrity of the device. To assist
manufacturers in meeting these
challenges, Henkel offers a wide
range of one-part and twopart epoxy and polyurethane
compounds.
Two-Component Liquid Polyurethanes
Filter-Lok® 82-072A™/82-072B™ – A filled, low-viscosity, two-component, room temperature curing,
tough elastomeric urethane adhesive designed for bonding/sealing in a wide variety of air filter
applications. Fast gel time. Low shrinkage. Low temperature flexibility.
Filter-Lok® 82-201A™/82-180B™ – A room temperature curing polyurethane compound which cures
to a tough, resilient adhesive. Ideal for potting of air filter media and ambient air filter end-cap
forming. Product is self leveling, fast de-molding, low wicking and minimal bubbling when potting
high moisture containing filter media.
Filter-Lok® 82-226A™/82-226B™ – A flexible two-component, room temperature curing, elastomeric
urethane compound designed for bonding and sealing in a wide variety of air filter applications.
Excellent adhesion to filter media, including fiberglass, cellulose and synthetic media.
Filter-Lok® 82-413A™/82-413B™ – A filled, low-viscosity two-component, room temperature curing,
tough elastomeric urethane adhesive with fast gel time. Designed for bonding/sealing in a wide
variety of air filter applications.
Filter-Lok® 82-425A™/82-425B™ – A two-component, fast-curing low viscosity, urethane adhesive/
sealer. The product cures to a high strength polyurethane with excellent metal adhesion and
durability. Especially useful for use as an end-cap product for air filters exposed to a variety
of conditions.
Filter-Lok® 82-180A™/82-180B™ – A self-leveling, fast de-molding and low wicking polyurethane
compound which cures at room temperature to form tough, resilient and chemical resistant bonds.
Suggested uses include potting of water filter media and ambient water filter end-cap forming.
Filter-Lok® 82-178A™/82-178B™ – A room temperature curing polyurethane compound which
offers an excellent balance of membrane penetration and surface holdout, resulting in excellent
fiber tearing bonds. Resists bubbling when used on wet substrates, making it suitable for wet
and dry membranes. Excellent hydrolytic stability, and very resistant to a wide range of pH and
temperatures. Conforms to the requirements of FDA 175.105 and is certified to NSF 61.
Macroplast® UK-8103™ & UK-5400R™ – A two-component adhesive system for bonding panel
composites, including hard foams to metal. Also can be used for potting applications.
62
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
Potting, Molding
& Encapsulating
Order Item
Number
Products
Package Type
Product Type
Color
Viscosity (cps)
Mix Ratio A:B
(by volume)
Work Life
Two-Component Liquid Polyurethanes
Filter-Lok® 82-072A™/82-072B™
Filter-Lok® 82-201A™/82-180B™
Filter-Lok® 82-226A™/82-226B™
Filter-Lok® 82-413A™/82-413B™
Filter-Lok® 82-425A™/82-425B™
NEW!
Filter-Lok® 82-180A™/82-180B™
Filter-Lok® 82-178A™/82-178B™
NEW!
Macroplast® UK-8103™ &
NEW!
UK-5400R™
1219038
55 gal. Drum - Part A
1219039
5 gal. Pail - Part B
1219040
55 gal. Drum - Part B
1219075
55 gal. Drum - Part A
1219067
55 gal. Drum - Part B
1219084
55 gal. Drum - Part A
1219087
5 gal. Pail - Part B
1219088
55 gal. Drum - Part B
1219110
Tote - Part A
1219111
Tote - Part B
1254385
5 gal. Pail - Part A
1254386
5 gal. Pail - Part B
1219066
55 gal. Drum - Part A
1219067
55 gal. Drum - Part B
1219058
55 gal. Drum - Part A
1219060
Tote - Part A
1219061
55 gal. Drum - Part B
1219063
Tote - Part B
176884
5 gal. Pail - UK-8103™
515496
5 gal. Pail - UK-5400R™
2K Polyurethane
White/Dark
Brown
30,000 / 200
3.2 : 1
150 sec.
2K Polyurethane
Blue/Amber
1300 / 1100
2:1
60 - 90 sec.
2K Polyurethane
Black/Amber
1700 / 6700
2.9 : 1
5 - 7 min.
2K Polyurethane
White/Dark
Brown
2200 / 100
2.5 : 1
210 sec.
2K Polyurethane
White/Brown
3000 / 100
1.9 : 1
45 sec.
2K Polyurethane
Blue/Amber
1500 / 1100
1.34 : 1
120 sec.
2K Polyurethane
Amber/Amber
22,000 / 22,000
1:1
46-60 min.
2K Polyurethane
Amber
27,000 / 250
3.7 : 1
55 min.
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
63
Products
Potting, Molding
& Encapsulating
Potting, Molding
& Encapsulating
One-Component Liquid Epoxies
Eccobond® A-304-6™ – A general purpose, one-component, flowable, epoxy adhesive with excellent
thermal stability and resistance to many chemicals.
Eccobond® A-304-40™ – A general purpose, one-component, flowable, epoxy adhesive with excellent
thermal stability and resistance to many chemicals. Good for use with Skydrol®, and many
aggressive fluids.
Eccobond® A-316-43™ – A general one-component, flowable, epoxy adhesive with excellent thermal
stability and resistance to many chemicals. Good cold/impact properties.
Eccobond® 908-38™ – A one-component, flowable, epoxy adhesive with excellent thermal stability and
resistance to many chemicals. Excellent cold/impact properties.
Eccobond® A-316™ – A general purpose, one-component, flowable, epoxy adhesive with excellent
thermal stability and resistance to many chemicals. Good for use with Skydrol®, and many
aggressive fluids.
Eccobond® A-316-20™ – A one-component, flowable, epoxy adhesive with excellent thermal stability
and resistance to many chemicals. Good for use with Skydrol®, and many aggressive fluids.
Two-Component Liquid Epoxies
Bondmaster ETP 3400™ – A versatile, fast curing two-part epoxy with very good chemical resistance
to automotive and hydraulic fluids.
®
Bondmaster® E3520™ – A two-part epoxy that provides high bond strength to metal components and
good chemical resistance to automotive and hydraulic fluid
Bondmaster® E3346™ – A two-part adhesive/encapsulant with a controlled exotherm and a long
usable life. Cures after only several hours at room temperature, but without the accompanying high
heat build-up of other epoxies. Especially suited for the production of membrane filters.
Bondmaster® E3030™ – A two-part, low-viscosity, room temperature curing adhesive with a controlled
exotherm and a long usable pot life. Especially suited for the production of membrane filters.
Environmentally Friendly – 100% Solids. Low shrinkage.
64
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
Potting, Molding
& Encapsulating
Products
Order Item
Number
Product
Type
Package Type
Color
Viscosity (cps)
Mix
Ratio
Work Life
Cure Time/
Temperature
One-Component Liquid Epoxies
Eccobond® A-304-6™
1215361
5 gal. Pail
1K Epoxy
Blue
20,000
N/A
Indefinite
320°F for 5 min.
Eccobond® A-304-40™
1215369
5 gal. Pail
1K Epoxy
White
20,000
N/A
Indefinite
320°F for 5 min.
1215357
5 gal. Pail
1215358
55 gal. Drum
1K Epoxy
Beige
25,000
N/A
Indefinite
1215354
5 gal. Pail
1K Epoxy
Blue
40,000
N/A
Indefinite
320°F for 5 min.
1215371
1 liter Container
1215372
5 gal. Pail
1K Epoxy
Beige
40,000
N/A
Indefinite
320°F for 5 min.
1219096
5 gal. Pail
1K Epoxy
Grey
40,000
N/A
Indefinite
320°F for 5 min.
Eccobond® A-316-43™
Eccobond® 908-38™
Eccobond A-316™
®
Eccobond® A-316-20™
320°F for 5 min.
Two-Component Liquid Epoxies
Bondmaster® ETP 3400™
Bondmaster® E3520™
Bondmaster® E3346™
Bondmaster® E3030™
1219102
1 gal. Container - Part A
1219103
1 gal. Container - Part B
1219051
1 liter Container - Part A
1219052
1 liter Container - Part B
1219149
55 gal. Drum - Part A
1219150
55 gal. Drum - Part B
1219165
25 liter Pail - Part A
1219166
5 gal. Pail - Part B
1219167
25 liter Pail - Part B
2K Epoxy
White
50,000
4:1
10 min.
72°F for 24 hrs.
2K Epoxy
Grey
15,000
2:1
60 min.
72°F for 72 hrs.
2K Epoxy
Red / Blue
5,000 / 50,000
2:1
60 min.
72°F for 72 hrs.
2K Epoxy
Red / Blue
2,700 / 20
3:1
60 min.
72°F for 72 hrs.
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
65
Products
Seam Sealing
Seam Sealing
The seam sealing capabilities
of the Teroson® line of products
are world-class and second to
none. These products range
from weld seam sealers to
anti-flutter expandables for
the control of water, air, fuel
and vibration. Teroson® seam
sealers are available in easyto-handle cartridges, pails
and drums for convenient
dispensing. From expandable
products to paintable products,
our seam sealing products are
approved for use prior to or
after the metal pretreatment
process and are compatible
with paint finishing systems.
Body Shop Anti-Flutters
Terostat® 06-1272™ – This non-expanding, weld through sealer has enhanced shear adhesion, gas
resistance and is highly wash-off resistant, which offers good corrosion resistance, high elasticity, and
bond without read-through. Application can be manual or automated.
Terostat® 06-1242™ – This pumpable, high expandable, weld through, gas resistant body shop sealer
designed for oily or galvanized steel offers good corrosion resistance, high elasticity, and bond without
read-through. Application can be manual or automated.
Terostat® SA-4510™ – This elastomeric-based, cold-applied, pumpable adhesive is designed to expand
when subjected to heat to form a soft-closed cell foam. Has good adhesion on oily metal surfaces and
excellent wash resistance when applied between inner and outer panels to prevent metal-to-metal
contact and to reduce vibration.
Terostat® SA-490™ – This elastomeric-based, cold-applied, pumpable, non-PVC sealer has good adhesion
on oily metal and aluminum surfaces, and excellent wash resistance. Applied between inner and outer
panels to prevent metal-to-metal contact and to reduce vibration.
Terostat® SA-491™ – This elastomeric-based, cold-applied, pumpable, non-PVC sealer has good adhesion
on oily metal and aluminum surfaces, and excellent wash resistance. Applied between inner and outer
panels to prevent metal-to-metal contact and to reduce vibration.
Body Shop Sealants
Terostat® 4000-F™ – This elastomeric-based, room temperature-applied sealant cures and expands upon
heating and is designed to seal welded interior body panels.
Terostat® 06-1201™ – This pumpable, expandable, weld-through, gas-resistant body shop sealer for oily
or galvanized steel offers good corrosion resistance, high elasticity, and bond without read-through.
Application can be manual or automated.
Terostat® 2102™ AC/BC™ – This solvent-free, two-component, rubber-based adhesive/sealant is
dispensed using high-pressure pumps and mixed statically to start reacting at ambient temperature.
Wash-off resistant to pretreatment after approximately one hour (as used on the production line in the
automobile industry). Final curing occurs in the electrocoat oven.
Terostat® SA-463™ – This elastomeric-based, cold-applied, pumpable, weld-through sealer has good
adhesion on oily metal surfaces and excellent wash resistance making it ideal for spot welded joints
to prevent passage of water or dust. Also used for anti-flutter applications to prevent metal-to-metal
contact and reduce vibration.
Specialty Products
Terostat® 6100G™ – This pumpable, highly expandable, weld-through, gas-resistant body shop sealer
is designed for oily or galvanized steel, offering good corrosion resistance, high elasticity, and bond
without read-through. A good candidate for void filling in acoustical applications.
Terostat® 960H™ – This permanently plastic, solvent-free, strongly adherent, one-component sealant/
adhesive based on polyisobutylene is designed to adhere plastic trim to glass for a short time period
until the plastic component is mechanically fastened.
Terostat® 962-US™ – This permanently plastic, strongly adherent, one-component sealant/adhesive based
on butyl rubber can be hot applied, so that it softens to a large extent, but won’t melt, making it ideal
for working overhead and on vertical surfaces.
Terostat® 1297™ – This expanding, weld-through, semi-structural sealer has enhanced shear adhesion,
gas resistance and is wash-off resistant with low to zero VOCs. Offers good corrosion resistance, high
elasticity and bond without read-through. Application can be manual or automated.
66
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
% Volume
Change
Application
Temperature
Cure Profile
Remarks
97
1.4
150,000
0
RT
>25' @ 160°C
<60' @ 200°C
Essentially
non-expandable
Package
Type
Package
Weight
277 kg
26 kg
149 kg
12 pack
Terostat®
06-1242™
Rubber/
PVC
594164
594750
910475
Drum
Pail
Cartridge
240 kg
23 kg
12 pack
Black
98.25
1.25
175,000
450-600
RT
>25' @ 160°C
<60' @ 200°C
Terostat®
SA-4510™
Rubber/
PVC
635756
870909
919687
919688
Drum
1/2 Drum
Pail
Cartridge
256 kg
123 kg
24 kg
12 pack
Pale
Yellow
99
1.3
130,000
240-310
RT
>20' @ 163°C
Terostat®
SA-490™
Acrylic
Plastisol
1066011
1066508
938255
Drum
Pail
Cartridge
269 kg
24 kg
12 pack
Grey
98
1.35-1.45
120,000
0
RT
For aluminum
Terostat®
SA-491™
Acrylic
Plastisol
1065563
1174007
1065562
938251
Drum
1/2 Drum
Pail
Cartridge
285 kg
143 kg
24 kg
12 pack
Grey
98
1.45-1.55
120,000
RT
For aluminum
Terostat®
4000-F™
Rubber/
PVC
847258
847256
847257
1064387
Drum
1/2 Drum
Pail
Cartridge
272 kg
136 kg
26 kg
24 pack
Terostat®
06-1201™
Rubber/
PVC
594175
594178
Drum
Pail
277 kg
26 kg
Black
99
1.4
150,000
RT
>25' @ 160°C
<60' @ 200°C
150% expansion;
gasoline resistant
Terostat®
2102™ AC/BC™
Rubber
668244
759300
981575
981618
1126700
1145896
Drum Pt A
Drum Pt B
Pail Pt A
Pail Pt B
Cartridge
Cartridge
250 kg
230 kg
20 kg
20 kg
400 ml
50 ml
Black
98
1.4
90,000
35C
30' @ 175°C
Two-part hem sealer;
wash-off resistant
after 1 hour
Terostat®
SA-463™
Rubber
598486
598485
Drum
Pail
272 kg
26 kg
Black
97
1.46
100,000
RT
>20' @ 130°C
<30' @ 160°C
NEW!
Rubber
TBA
Terostat® 960H™
Rubber
621106
Drum
179 kg
Black
99.5
Terostat®
962-US™
Rubber
594271
Drum
200 kg
Black
100
Terostat® 1297™
Rubber
863166
929894
Drum
Cartridge
269 kg
12 pack
Black
97
Specific
Gravity
Order Item
Number
Rubber/
PVC
Drum
Pail
1/2 Drum
Cartridge
Color
Chemical
Basis
Minimum %
Solids
Viscosity,
cps
Seam Sealing
Grey
Terostat®
06-1272™
592972
594180
594755
929891
Products
Body Shop Anti-Flutters
MS-CD 470F
Body Shop Sealants
140,000
Specialty Products
Terostat®
6100G™
160,000
200,000
at 100°C
0
Hot applied,
permanently plastic
adhesive/sealant for
encapsulating glass
1.25-140
100,000
at 100°C
0
Hot applied; used on
sunroofs
1.34
90,000 at
100°C
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
67
Products
Energy, NVH, and
Fluid Management
Energy, NVH, and
Fluid Management
Henkel offers innovations in
strain energy, NVH and air/fluid
management that are used in
agricultural or heavy equipment,
recreational vehicles,
appliances, power equipment,
pumps and compressors,
specialty vehicles and more.
We offer a host of products
that manage stress and strain
energies of an assembly,
allowing it to absorb shock
without damage; products that
manage airborne and structureborne noise, vibration and
harshness; and products that
manage the intrusion of air,
water, fuel and other elements
into assemblies.
We are uniquely able to
engineer sprayable sound
deadeners, sealing strips,
paintable tapes, pumpables,
three-dimensional expanding
structural and sealing parts, and
other products for very specific
industry applications.
Structural Bonding
Terokal® 4555B™ – This one-component, solvent-free, impact-resistant, heat-curable, structural resin is
a workhorse for vehicle stiffening applications as well as an all-around adhesive with good toughness
and high peel resistance. Can be applied directly to oily substrates.
Terocore® 20003™ – This heat-curing, epoxy-based structural adhesive in tape form provides adhesion to
electrocoated or primed metal, and also to galvanized or cold-rolled steel and aluminum with nominal
coatings of drawing compounds or lubricants typically used in the automotive industry.
Terocore® 20101™ – Epoxy-based, 50% expandable, high-strength structural weld-through tape ideal in
spot weld joints to increase rigidity.
Fluid Management – Air & Water
Terostat® 10102™ – Weldable sealer tape, medium expansion (60-140%) body shop, low sag, with film.
Terostat® 06-1273™ – This pumpable, 200% expansion, weld-through, gas-resistant, controlled expansion
body shop sealer is designed for oily or galvanized steel. Application can be manual or automated.
Terophon® 23100™ – Deadener, butyl/aluminum foil laminate, constrained layer.
Terostat® 13003™ – This heat-curing, paint shop-applied, tacky, magnetic, paintable sealer supplied in
tape form is designed to seal metal seams on most electrocoated metal surfaces.
Terostat® 15101™ – Dry flowable, injection molded hot melt sealer.
Terostat® 19004™ – Structural sealer tape, high tensile.
Terostat® 10004™ – This heat-curing, rubber-based, weldable sealer in tape form provides adhesion to
electrocoated or primed metal, and also to galvanized or cold-rolled steel and aluminum with nominal
coatings of drawing compounds or lubricants typically used in the automotive industry.
Terostat® MS 930™, MS 935™, MS 939™ – Gun grade, one-component sealants based on silane
modified polymer, cure by reaction with moisture to soft elastic products and are free of solvents,
isocyanates, silicones and PVC.
Structural Reinforcement
Terocore 16301™ – Non-magnetic, high strength, 100% expandable, structural epoxy, metal
reinforcement patch designed to reinforce sheet metal from deflection and deformation due to oilcanning effect by reducing stress and strain energy. Ideal in hood, roof and sidewall construction.
Terocore® 1811™ – S tructural reinforcing, dimensionally stable injection molded structural foam.
Terocore® 1030HX-01™ – Structural reinforcing, energy management, semi-tacky, 100% expanding
structural foam.
®
Noise, Vibration and Harshness Reduction
Terophon 21007™ – Heat-curing, body shop-applied, dry, medium expansion material, used to fill pillars
and cavities; provides excellent adhesion to electrocoated or typical oily metal surfaces.
Terophon® 22100™ – Tacky, 1000% expandable minimum, NVH sealer.
Terophon® 23100™ – Deadener, butyl/aluminum foil laminate, constrained layer.
Terophon® 2751™ – This waterborne compound is a sound deadening coating, designed to allow the user
to eliminate current interior sealer and acoustic melt sheets. Spray-applied using airless equipment
and can be cured at room temperature.
Terophon® 18101™ – Expandable NVH anti-flutter material for aluminum substrates.
Terophon® 21301™ – Dry air baffle NVH material, expandable 1000+ %, sag resistant.
Terostat® 27006™ – Dry, injection molded, extruded fuel resistant, expandable, target expansion = 300%.
®
68
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
Features
Heat
Shear Strength
(psi)
Cure
Epoxy
Application
Chemistry
Energy, NVH, and
Fluid Management
Products
Structural Bonding
Terokal® 4555B™
NEW!
®
Terocore 20003™
Epoxy
Heat
Terocore® 20101™
Epoxy
Heat
Pre-Metal Treatment
2,068
High peel strength
Pre-Metal Treatment
2,000
High strength weldable tape expansion
range 0% - 30%
Pre-Metal Treatment
1,000
Medium strength weldable tape
expansion range 40% - 80%
Fluid Management – Air & Water
Terostat 10102™
Rubber
Heat
Pre-Metal Treatment
NA
Weldable tape / die-cut expansion
range 60% - 140%
Terostat® 06-1273™
Rubber
Heat
Pre-Metal Treatment
NA
Weldable, pumpable, high wash-off
resistance, expansion range 200%
Terophon® 23100™
Butyl
Non-Heat
Post Paint
>40
A non-expanding, non-heat, pressure
sensitive butyl, to be used in strip form
Terostat® 13003™
EVA
Heat
Post-Metal Treatment
NA
Tacky magnetic tape / die-cut
paintable, high sag
Terostat® 15101™
EVA
Heat
Post-Metal Treatment
NA
Hot melt medium flow tape / die-cut
Terostat® 19004™
EVA
Heat
Pre-Metal Treatment
600 Tensile
Hot melt, high tensile, tape / rope
®
Terostat 10004™
®
Rubber
Heat
Pre-Metal Treatment
NA
Weldable tape / die-cut expansion
range 15% - 60%
Terostat® MS 930™
NEW!
MS Polymer
Moisture
After Topcoat
NA
Pumpable, good paint compatibility,
odorless
Terostat® MS 935™
NEW!
MS Polymer
Moisture
After Topcoat
NA
Pumpable, good paint compatibility,
odorless
Terostat® MS 939™
NEW!
MS Polymer
Moisture
After Topcoat
NA
Pumpable, good paint compatibility,
odorless
Structural Reinforcement
Terocore® 16301™
Terocore® 1811™
NEW!
Terocore® 1030HX-01™
Epoxy
Heat
Pre-Metal Treatment
196 N Three-Point
Deflection
Low-density reinforcement composite
Epoxy
Heat
Pre-Metal Treatment
1,100 MPa
(Compressive Modulous)
Injection moldable, dimensionally
stable, reinforcement composite
Epoxy
Heat
Pre-Metal Treatment
1,100 MPa
(Compressive Modulous)
100% expanding, extruded die-cut,
reinforcement composite
Noise, vibration and harshness reduction
Rubber
Heat
Pre-Metal Treatment
NA
Dry extrudable / injection moldable,
expansion range 300% - 400%
Rubber
Heat
Pre-Metal Treatment
NA
Tacky extrudable expansion range
1000%
Terophon® 23100™
Butyl
Pressure
Sensitive
Post Paint
>40 N Peel Adhesion
Vibration damper, excellent adhesion to
steel and other surfaces
Terophon® 2751™
Polyacrylate
Water
Evaporation/Heat
Pre/Post Paint
NA
Liquid applied (lasd)
Terophon® 18101™
Rubber
Heat
Pre-Metal Treatment
NA
Anti-flutter, 350% - 450% expansion
Terophon® 21301™
Rubber
Heat
Pre-Metal Treatment
NA
Dry extrudable / injection moldable,
expansion range 1000%
Rubber
Heat
Pre-Metal Treatment
800 - 2100 kPa
Cross-Lap Strength
Fuel resistant, dry extrudable / injection
moldable expansion range 300%
Terophon 21007™
®
Terophon® 22100™
Terostat® 27006™
NEW!
NEW!
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
69
Products
Water-Based
Adhesives
Water-Based Adhesives
Our complete line of general
industrial adhesives allows
manufacturers the ability to
bond a variety of different
substrates under a wide range
of process and environmental
parameters. Our products
can be applied by brush,
roller coating, spray and
even as contact cements to
fit our customers’ assembly
processes. Our formulating
chemists and scientists have
developed product solutions
that save weight, time, energy
and process complexity. The
industry continues to stick with
Henkel as the leader in general
industrial adhesives.
Water-Based Acrylic Products
Adhesin SA-7648™ – A formulated pressure-sensitive, acrylic emulsion adhesive that exhibits very high
dry tack and peel strength values. It’s a high solids adhesive product that can be applied by spray or
roller coating methods and subsequently dried by convection type ovens very quickly.
®
Adhesin® SA-9627™ – A general purpose pressure-sensitive acrylic for bonding plastics. High tack and high
solids offer quick processing and adhesion to many substrates.
Adhesin® XA-7584™ Black – Laminating adhesive for flexible air duct cores is a flame-retardant, ULrecognized component (MH28702) with high tack and excellent adhesion to films; 300 cP viscosity.
Adhesin® XA-7594™ Black – Laminating adhesive for flexible air duct cores is a UL-recognized component
(MH28702) with high tack, water-resistance and very high shear strength; 200 cP viscosity.
Adhesin® XA-7595™ Black – Laminating adhesive for flexible air duct cores is a UL-recognized component
(MH28702) with high tack, water resistance and high shear strength; 150 cP viscosity.
Adhesin® XA-7597™ – Laminating adhesive for flexible air duct vapor barriers is a flame retardant, ULrecognized component (MH28702) with high tack and excellent adhesion to films. Natural colored.
Adhesin® XA-7597™ Grey – Laminating adhesive for flexible air duct vapor barriers is a flame retardant,
UL-recognized component (MH28702) with high tack and excellent adhesion to films. Grey colored.
Adhesin® XA-7597LV™ – Laminating adhesive for flexible air duct vapor barriers that is a flame-retardant,
UL-recognized component (MH28702) with high tack and excellent adhesion to films. Natural colored.
Adhesin® XA-7598™ – Laminating adhesive for flexible air duct vapor barriers that is a flame-retardant, ULrecognized component (MH28702) and has excellent water resistance and excellent adhesion to films.
Bondmaster® 38-8731™ – A specialty, self-crosslinking pressure sensitive acrylic for use in technical
laminates and the manufacture of flexible air ducts.
Bondmaster® 40-452A™ – Water-based pressure sensitive adhesive for bonding fibrous glass, jute, and
other types of lightweight insulation to ductwork and to housings for air conditioning units and furnaces.
Complies with requirements included in UL 2395 and UL 727.
Bondmaster® 40-514A™ – Water-based pressure sensitive adhesive suitable for bonding fibrous glass,
jute, and other types of lightweight insulation to ductwork and to housings for air conditioning units and
furnaces. Tinted blue in color to allow better visual inspection and control of application.
Water-Based Rubber Products
Adhesin® 3781™ WB Bonding Adhesive – This pressure-sensitive adhesive with high tack, moderate peel
strength and excellent water resistance is designed to bond difficult substrates such as OPP, EPDM,
and PE.
Dorus® AW-5474™ Anti-Wicking Compound – This thick, elastomeric coating seals cutouts from moisture
for door and window cutouts in RVs and Manufactured Houses, and has excellent adhesion to all
building materials.
Bondmaster® 40-0880™ – A water-based adhesive for bonding lightweight insulation to ductwork and
housings for air conditioning units and furnaces. Meets requirements of NFPA 90A and NFPA 90B. Meets
requirements of safety standards set in UL-2395 and UL-727; based on a maximum coverage rate of
625 square feet per gallon.
Bondmaster® 40-0881™ – A lower solids, lower viscosity modification of Bondmaster® 40-0880™. Meets
the requirements of NFPA 90A and NFPA 90B.
70
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
Products
Drum
746591
Tote
1012811
Drum
746689
Tote
% Solids
908362
Viscosity, cPs
Drum
Product Base
1009412
Available
Colors
Pail
Water-based
Pressure Sensitive
Natural
Acrylic
1,800
63
Water-based
Pressure Sensitive
Natural
Acrylic
2,000
60
Water-based
Pressure Sensitive
Black
Acrylic
300
57
Water-based
Pressure Sensitive
Black
Acrylic
200
55
Water-based
Pressure Sensitive
Black
Acrylic
150
54
Water-based
Pressure Sensitive
Natural
Acrylic
1,500
62
Water-based
Pressure Sensitive
Grey
Acrylic
1,000
62
Water-based
Pressure Sensitive
Natural
Acrylic
750
62
Water-based
Pressure Sensitive
Natural
Acrylic
600
58
Water-based
Pressure Sensitive
Natural
Acrylic
450
50
Water-based
Pressure Sensitive
Natural
Acrylic
300
65
Water-based
Pressure Sensitive
Blue
Acrylic
300
65
Product Type
Package Type
997945
System Media
Carrier
Order Item
Number
Water-Based
Adhesives
Products
WATER-BASED ACRYLIC PRODUCTS
Adhesin® SA-7648™
Adhesin® SA-9627™
Adhesin XA-7584™ Black
®
Adhesin® XA-7594™
Black
NEW!
Adhesin® XA-7595™ Black
Adhesin® XA-7597™
Adhesin® XA-7597™ Grey
Adhesin® XA-7597LV™
Adhesin® XA-7598™
Bondmaster 38-8731™
®
Tote
Drum
834793
Tote
1012808
Drum
746609
Tote
1012810
Drum
746615
Tote
1012809
Drum
832196
Tote
1013508
Drum
1218153
Pail
1218154
Steel Drum
1218155
Fiber Drum
1218156
Tote
1218380
Pail
1218381
Drum
NEW!
1218382
Tote
1270386
Fiber Tote
NEW!
1218399
Pail
1218400
Tote
747777
Can
Bondmaster® 40-452A™
Bondmaster®
40-514A™
746601
1012805
WATER-BASED RUBBER PRODUCTS
Adhesin® 3781™
WB Bonding Adhesive
Dorus® AW-5474™
Anti-Wicking Compound
Bondmaster 40-0880™
®
Bondmaster® 40-0881™
747778
Pail
884113
Tote
514766
Pail
960616
Drum
1218314
Pail
1218315
Steel Drum
1218316
Fiber Drum
1218318
Tote
1218321
Pail
1218322
Steel Drum
1218323
Fiber Drum
1218325
Tote
Water-based
Pressure Sensitive
Natural
SB Rubber
10,000
51
Water-based
Anti-wick Coating
Green
PCP
Rubber
10,000
52
Water-based
Pressure Sensitive
Light Brown
SB Rubber
25,000
71
Water-based
Pressure Sensitive
Light Brown
SB Rubber
6,500
67
Listed on and complies with the Canadian Domestic Substances List
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
71
Products
Water-Based
Adhesives
Water-Based Adhesives
Water-Based Vinyl Products
Assembly Adhesives
Adhesin® 51-3053™ – General purpose assembly and laminating adhesive. Balanced wet tack, set speed and adhesion.
Adhesin® 51-3093™ – Assembly adhesive for filter media, metal wire scrim and chipboard. Excellent wet tack, high solids,
and non-blocking bonds. FDA 175.105 approved.
Adhesin® 51-3130™ – Assembly adhesive for filter media, glue laps and paper-to-paper laminates. Good wet tack and
water resistance.
Adhesin® 51-3130H™ – Assembly adhesive for filter media, glue laps and paper-to-paper laminates. Good wet tack and
water resistance.
Adhesin® 51-5578™ – This product is designed for extrusion or wheel application and exhibits quick wet tack and
penetration into coating. It cleans up readily, yet when dry has moderate-to-good water resistance.
Adhesin® 56-5531™ – New assembly adhesive for filter media, glue laps and paper-to-paper laminates. High wet tack
and set speed. Good water resistance.
Adhesin® A 56-5533™ – A high solids and high viscosity spray grade adhesive for excellent holdout on highly porous
surfaces such as insulation and textiles. Used for bonding facings to insulation boards in the production of ceiling tiles.
Adhesin® 56-5545™ – A high solids, water-based adhesive for bonding fiberglass insulation to metal. Also used for
laminating select vinyl, paper, metal, textile and nonwoven sheets to porous substrates. UL 723 Listed with 0/0 smoke
and flame spread.
Adhesin® LAW-2522™ – Pre-catalyzed adhesive for RF and heat-press bonding of wood and paper with very good
water resistance.
Aeroframe® 33-607A™ – A medium viscosity, fast setting, long open time adhesive ideal for assembling filter components
made of board/nonwoven/metal substrates. Meets composition requirements of Indirect Food Additives Regulation
21CFR 175.105 “Adhesives.”
Aeroframe® 40-428A™ – Especially formulated for foaming, but may be used foamed and unfoamed. A medium
viscosity, fast setting, long open time adhesive. Ideal for adhesion to filter board/nonwoven/metal substrates for filter
assemblies. Meets composition requirements of Indirect Food Additives Regulation 21 CFR 175.105 “Adhesives.”
Aeroframe® 40-078A™ – Especially formulated for foaming, but may be used foamed and unfoamed. Ideal for filter
applications requiring higher viscosity, fast setting, tacky products with adhesion to non-porous substrates. Complies
with Indirect Food Additives Regulation 21 CFR 175.105 “Adhesives.”
Filter-Lok® 40-586A™ – A high tack adhesive with excellent balance of set speed and long open time. Adhesion to porous
substrates.
National® 33-672A™ – High quality, very fast setting, water resistant, corrugating or paper laminating adhesive, especially
where good “retack” is required. Complies with B116 Indirect Food Additives Regulation 21 CFR 175.105 “Adhesives.”
72
Products
Viscosity, cPs
% Solids
Drum
Product Base
513033
Available
Colors
Tote
Water-based
General Purpose
Assembly
Natural
Vinyl
1,500
54
Water-based
General Purpose
Assembly
Natural
Vinyl
5,500
64
Water-based
General Purpose
Assembly
Natural
Vinyl
2,000
57
Water-based
General Purpose
Assembly
Natural
Vinyl
4,000
57
Water-based
General Purpose
Assembly
Natural
Vinyl
3,000
58
Water-based
General Purpose
Assembly
Natural
Vinyl
3,000
56
Water-based
Specialty Wet-bond
Natural
Vinyl
27,000
72
Water-based
Specialty Wet-bond
Natural
Vinyl
6,500
60
Water-based
General Purpose
Assembly
Natural
Vinyl
4,000
38
Water-based
Framing Cold Glue
White
Vinyl
3,500
59
Water-based
Framing Cold Glue
White
Vinyl
2,200
56
Water-based
Framing Cold Glue
White
Vinyl
4,000
62
Water-based
Framing Cold Glue
White
Vinyl
1,500
30
Water-based
Framing Cold Glue
White
Vinyl
1,500
61
Product Type
Package Type
513029
System Media
Carrier
Order Item
Number
Water-Based
Adhesives
Products
WATER-BASED VINYL PRODUCTS
Adhesin® 51-3053™
Adhesin® 51-3093™
Adhesin® 51-3130™
Adhesin® 51-3130H™
Adhesin® 51-5578™
Adhesin® 56-5531™
NEW!
Adhesin® A 56-5533™
NEW!
Adhesin® 56-5545™
Adhesin® LAW-2522™
NEW!
NEW!
Aeroframe® 33-607A™
Aeroframe® 40-428A™
Aeroframe® 40-078A™
Filter-Lok® 40-586A™
National® 33-672A™
NEW!
513079
Tote
513086
Drum
513096
Tote
513103
Drum
513104
Pail
564141
Tote
513108
Tote
513109
Drum
513224
Tote
513227
Drum
941610
Tote
1104783
Drum
1123825
Tote
1061456
Pail
939627
Drum
1108509
Tote
854872
Pail
858066
Drum
1216963
Pail
1216964
Drum
1218375
Pail
1218377
Tote
1218286
Pail
1218287
Tote
1218402
Pail
1218403
Drum
1218404
Tote
1217016
Pail
1276035
Drum
1217018
Tote
Listed on and complies with the Canadian Domestic Substances List
For additional product offerings to fit your specific needs, call us at:
1-800-521-1355
73
Products
Water-Based
Adhesives
Water-Based Adhesives
Water-Based Vinyl Products (Continued)
Laminating Adhesives
Adhesin® 51-5654™ – Specifically designed to bond foil/scrim/kraft to OSB, and other wood surfaces. This product has excellent wet tack
with fast setting speeds. Its dry film provides high heat and water resistance.
Adhesin® 56-5343™ – A laminating adhesive for supporting vinyl films and fabrics to wood, MDF, particle board and other porous surfaces.
It is suitable for direct roll coating with excellent wet tack properties.
Adhesin® A 56-5532™ – A high solids, roll coatable laminating adhesive with superior shear strength for high performance applications.
Good water resistance.
Bondmaster® 40-0857™ – Polyvinyl emulsion adhesive for laminating foil, vinyl and composite facings to glass insulation mat. Meets
requirements of NFPA-90A and NFPA 90B. Roll goods manufactured with this product under the conditions set forth in Henkel’s UL
Batts & Blankets listing have received FHC 25/50 UL ratings.
Bondmaster® 40-453A™ – A formulated copolymer emulsion adhesive used for bonding foil/scrim/kraft and other facings to fiberglass
insulation in the manufacture of rolled goods for commercial and residential buildings.
Dorus® Vetak 7747™ – Laminating adhesive for difficult-to-bond substrates. Good for vinyl sheets and coated papers.
Coating
Adhesin SIA-485B™ Anti-Wick – Latex sealer designed for use in the RV industry to seal cutouts in porous substrates such as plywood
from wicking moisture. It can be applied by brush or roller.
®
Water-Based Additives and Catalysts
Dorus® Tancotard TB-408™ – A fine dispersion of decabromodiphenyl oxide and antimony oxide in water. Used as an additive to many
water-based adhesives and coatings to provide flame resistance.
Water-Based Polyurethane Product
Dorus Permattach 396HC™ – A high performance, heat reactive, one-component polyurethane adhesive for tough elastomeric bond
applications for use in bonding rubber to leather uppers in footwear.
®
74
Products
% Solids
Drum
Viscosity, cPs
552134
Product Base
Tote
Available
Colors
Package Type
513265
Water-based
General Purpose
Laminating
Natural
Vinyl
3,000
53
Water-based
General Purpose
Laminating
Natural
Vinyl
10,000
61
Water-based
General Purpose
Laminating
Natural
Vinyl
7,500
65
Water-based
General Purpose
Laminating
White
Vinyl
300
45
Water-based
General Purpose
Laminating
White
Vinyl
800
54
Water-based
General Purpose
Laminating
Natural
Vinyl
3,200
57
Water-based
Anti-wick Coating
Black or White
Vinyl
3,000
50
Natural
Aromatic Promine
2,500
62
Natural
PUD
6,000
38
Product Type
Order Item
Number
System Media
Carrier
Water-Based
Adhesives
Products
WATER-BASED VINYL PRODUCTS (Continued)
Adhesin® 51-5654™
Adhesin® 56-5343™
Adhesin A 56-5532™
®
Bondmaster 40-0857™
®
Bondmaster® 40-453A™
Dorus® Vetak 7747™
Adhesin SIA-485B™ Anti-Wick
®
553346
Pail
556237
Tote
608442
Drum
853556
Tote
1070617
Drum
1218306
Pail
1218307
Steel Drum
1218308
Fiber Drum
1218311
Tote
1218383
Pail
1218384
Drum
1218385
Tote
748366
Tote
748367
Drum
750900
Drum
WATER-BASED ADDITIVES AND CATALYSTS
Dorus® Tancotard TB-408™
1010931
Drum
Water-based
Flame Retardant
WATER-BASED POLYURETHANE PRODUCT
Dorus® Permattach
396HC™
NEW!
854328
Pail
Water-based
Specialty Heat Seal
75
IES
Integrated
Equipment Solutions
IES (Integrated Equipment Solutions)
For nearly a century, Henkel has been the global leader in metal
pretreatment technologies. Over the past 30 years, Henkel has
designed, built and integrated advanced equipment solutions to
optimize the application of metal pretreatment products, providing
trusted, high quality services to its customers. We offer a complete
line of application equipment, process controls, pretreatment
support equipment and other specialty systems that can be
easily integrated into existing manufacturing processes. Backed
by this broad product range and technical expertise, Henkel is
the single, comprehensive source for integrated equipment and
works together with its customers to deliver solutions that fit
all needs.
Process Control systems
Henkel’s equipment systems have been used worldwide to control
a range of Henkel pretreatment chemical processes, including:
pretreatment support equipment
Parco® cleaners
Aquence® coatings
Bonderite® treatments
Multan® lubes and coolants
Alodine® treatments
Fixodine® conditioners
Mobility enhancers
Prep-N-Cote
Ridoline cleaners
Parcolene® sealing rinses
Solid State
Lineguard 97
Solid-State Parts & Accessories
®
PLC-Based
Lineguard 760
Lineguard PC 2500
Lineguard PC 6000
PLC-Based Parts & Accessories
®
®
®
PC-Based
Lineguard SC 1002 SmartControl ™ System
Lineguard SC 2002 SmartControl ™ System
Typical SmartControl ™ System Layout
SmartControl ™ Example Control Screens
Lineguard SC 3002 SmartControl ™ System
PC-Based Parts & Accessories
®
®
®
Chemical Metering Pumps
HST 1, 2, 5, 8, 25, 60
PA 1-CL Pump
Lineguard Flow Totalizer
Chemical Metering Pumps Replacement Parts & Accessories
®
®
®
Henkel Integrated Equipment Solutions (IES) provide far more
than leading-edge chemical process management. Customers
receive technical support from the IES group to assist with
equipment selection, equipment maintenance and production
staff training. Henkel products, equipment and services deliver
total solutions to help meet the intense quality and efficiency
challenges of today’s competitive manufacturing environment.
For a complete overview of Henkel’s equipment systems, visit
our website at www.equipment.henkel.us.
Air Diaphragm Pumps
Air Diaphragm Pumps Replacement Parts & Accessories
Level Controls
Level Control Assemblies
Level Control Assemblies Replacement Parts & Accessories
Bulk Level Monitoring System & Accessories
Low Drum Alarm & Replacement Parts
Spray Nozzles
Spray Nozzle Selection Guides & Accessories
Nozzle Application Drawing
Bonderloc™ Nozzle Application Drawing
Coalescing Oil Separators
3, 6 & 20 GPM Coalescing Oil Separators
Ion Exchange
Ion Exchange Optional Spare Parts
Lineguard Ion Exchange 871 System
®
test equipment & Data management systems
Lineguard 101D Meter & Options
Lineguard Data Monitoring System
Lineguard DocSys™ System
®
®
®
Equipment field Service support
Equipment Field Service Support and Contact Information
76
IES
Integrated
Equipment Solutions
Equipment Field Service Support
The equipment group offers many different services; one is
sure to fit your needs. Below is the list of services we can
perform for you:
• Help Desks for Process & Equipment Troubleshooting
• Field Service for On-Site Support
• Sales Support for Customer Problem Resolution
• Service and Preventive Maintenance Contracts
• Equipment Calibration Certifications for ISO
• Per Diem Service Visits
• Equipment Audits
• Line Audits (for Equipment)
Note: Top nozzles 80° spray
angle for full coverage.
• Equipment Training
Selection of spray angles
based on largest silhouette
through washer.
• Remote Access to Equipment / Systems for Diagnosing
and Resolving Issues
Offset nozzles on alternate
risers to ensure complete
coverage.
Note overlap of
spray pattern:
see Detail A.
Note minimum
recommended
spray distance.
9"
(23 cm)
Contact Information:
• Equipment Help Desk: 1-800-391-4740
• Equipment Help Desk Fax: 248-589-4629
77
Products
Additional
Supporting Products
Additional Supporting
Products
Multan® 5005M™ – A chlorinated soluble oil coolant for ferrous
and non-ferrous applications where extreme pressure additives
are needed.
Multan® F 750™ – This synthetic lubricant contains a
temperature-activated polymer and is ideal for applications
where metal temperatures rise due to the type of operation.
Multan® 8304™ – A synthetic coolant that will absorb oil for
additional lubricity. Suitable for ferrous and most
aluminum alloys.
Multan® F 927F™ – This high viscosity soluble oil product is
suitable for heavy forming operations on all metal types.
Multan B Series – Fluids are bio-resistant, semi-synthetic
lubricants with extreme pressure and lubricity additives used
for light-to-heavy applications, designed for machining and
grinding ferrous and aluminum alloys.
®
Multan® B-200™ – This semi-synthetic, bio-resistant, all-purpose
product is suitable on ferrous and aluminum materials and
provides first-rate machine and part cleanliness qualities.
Multan® CR Series – These metal-removing straight oils provide a
durable product for light-to-heavy applications.
Multan® CR 20™ – This high viscosity straight oil used in grinding
and machining operations is also applicable in tool grinding
applications.
Multan® CR 67™ – This light viscosity straight oil, used in grinding
and light machining operations, is also applicable in tool
grinding applications.
Multan® DFL 55 HS™ – This dry film lubricant is a micro-wax
dispersion used in heavy forming operations and is dry to the
touch after processing.
Multan® F 737™ – This synthetic, light duty forming lubricant is
ideal for replacing high-VOC vanishing oil applications.
78
Multan® F 1009™ – A superb high performance synthetic product
for heavy drawing of ferrous metals, including stainless steel,
leaving a fluid-type residue.
Multan® F 7160™ – Synthetic forming fluid with excellent high
performance product for heavy drawing of ferrous metals.
Multan® PL 198™ – This highly viscous oil-based material used in
hydro-forming and extreme forming operations can be used in
conjunction with our OEM-approved pressure side fluids.
Multan® PL 633™ – This light duty, 120ºF flash vanishing oil is
ideal for operations where the stampings are not washed after
the operation.
Multan® PL Prelube MP 404™ – This oil-based product is ideal
for non-ferrous forming operations where a mix of ferrous
materials can also be found.
P3® 15™ Hot Stripper Additive – Especially formulated for use in
highly alkaline solutions to assist in the removal of paint.
P3® 40™ Tire Lube – An odorless, very slightly viscous,
liquid material specifically formulated to possess
lubrication properties.
P3® 50™ Hot Stripper – Especially formulated for immersion or
spray application on painted steel surfaces.
Products
Additional
Supporting Products
P3® 200™ Paint Line Cleaner – This non-methylene chloride,
alkaline, zero VOC-based, non-combustible product is used for
cleaning internally the re-circulating paint lines for waterborne
and solvent-borne paint systems and was specially developed
to be compatible with all types of fluoroelastomer seals.
P3® 301™ Stripper – Diphase, solvent paint stripper for removing
heavy paint builds from aluminum, steel and various
soft metals.
P3 2247™ Tacky Oven Coating – A polymeric-based coating
formulated for use in high temperature paint ovens.
®
P3 2455™ Baffle Coating – A green, petroleum-based, waterresistant coating for protecting baffles, back sections, stacks,
metal, concrete and any other wet areas. Removed manually or
by high-pressure spray wash.
®
P3® 2469™ With Tacky Masking – A white, water-based coating
for applying to paint spray booth walls and floors with
tackiness to trap airborne dirt and reduce paint defects on
parts. Water removable by high-power, cold-water spray.
P3® 2485A™ Clear Masking – A colorless, water-based coating
for protecting paint spray-booth walls and floors from oversprayed paint, and is water removable by high-power, coldwater spray.
P3® 2495™ Hi-Lite – Petroleum-based, colorless, odorless, bodyin-white highlighting material, used to locate surface defects
on metal parts prior to pretreatment.
P3® Neutracare® 5175™ – This phosphated neutral cleaner with
in-process corrosion prevention is designed to be used at
a moderate temperature (120°F-160°F). For use on ferrous
alloys only.
P3® Parco® 100 AWS™ – A water-based, body-in-white, anti-weld
spatter agent material.
P3® Peelables – Water-based and solvent-based peelable
protective coatings used for temporary protection of parts,
spray booths and equipment.
P3® Polyprep® Shield Coating – A unique product in the industry
that forms a thin, temporary protective film over fresh, tender
plastic parts.
P3® Pre-Saturated Wipes – A variety of cloth wipe products
are available that are pre-saturated with products such as
Parcosol® purge cleaner, P3® Hi-Lite products, Alodine® and
Bonderite® pretreatments, and Polyprep® plastic cleaners.
P3® 2488B™ Protective Coating – This water-based, zeroVOC, alkaline removable polymeric material is designed for
application on aluminum, steel, plastic and many
other substrates.
79
Products
Index
80
Index
06-1201™............................ Terostat® 06-1201™............................................................66, 67 06-1242™............................ Terostat® 06-1242™............................................................66, 67 06-1272™............................ Terostat® 06-1272™............................................................66, 67 06-1273™............................ Terostat® 06-1273™............................................................68, 69 16-192B™............................ Macromelt® TPX 16-192B™.................................................48, 49 16-333B™............................ Macromelt® TPX 16-333B™.................................................48, 49 33-607A™............................ Aeroframe® 33-607A™........................................................72, 73 33-672A™............................ National® 33-672A™...........................................................72, 73 34-159B™............................ Filter-Lok® 34-159B™.........................................................48, 49 34-268D™............................ Purmelt® Purge 34-268D™..................................................52, 53 34-342B™............................ Instant-Lok® 34-342B™.......................................................50, 51 34-412B™............................ Filter-Lok® 34-412B™.........................................................50, 51 34-491C™............................ Versa-Weld™ 34-491C™....................................................50, 51 34-771C™............................ Filter-Lok® 34-771C™.........................................................50, 51 34-772C™............................ Ultra-Melt® 34-772C™.........................................................50, 51 34-780C™............................ Filter-Lok® 34-780C™.........................................................50, 51 34-785A™............................ Purmelt® Cleaner 34-785A™...............................................52, 53 34-870C™............................ Filter-Lok® 34-870C™.........................................................50, 51 34-947C™............................ Filter-Lok® 34-947C™.........................................................50, 51 34-967C™............................ Filter-Lok® 34-967C™.........................................................50, 51 34-1214™............................ Uni-Flex™ 34-1214™.........................................................50, 51 34-2631™............................ Instant-Lok® 34-2631™.......................................................50, 51 34-2635™............................ Instant-Lok® 34-2635™.......................................................50, 51 34-2787™............................ Instant-Lok® 34-2787™.......................................................50, 51 34-3182™............................ Purmelt® Purge 34-3182™..................................................52, 53 34-3412™............................ Hyperm™ 34-3412™..........................................................48, 49 34-4955™............................ Kan-Tak® 34-4955™...........................................................50, 51 38-8731™............................ Bondmaster® 38-8731™......................................................70, 71 40-078A™............................ Aeroframe® 40-078A™........................................................72, 73 40-428A™............................ Aeroframe® 40-428A™........................................................72, 73 40-452A™............................ Bondmaster® 40-452A™............................................... 10, 70, 71 40-453A™............................ Bondmaster® 40-453A™.....................................................74, 75 40-514A™............................ Bondmaster® 40-514A™.....................................................70, 71 40-586A™............................ Filter-Lok® 40-586A™..........................................................72, 73 40-0857™............................ Bondmaster® 40-0857™......................................................74, 75 40-0880™............................ Bondmaster® 40-0880™................................................ 10, 70, 71 40-0881™............................ Bondmaster® 40-0881™......................................................70, 71 51-3053™............................ Adhesin® 51-3053™............................................................72, 73 51-3093™............................ Adhesin® 51-3093™............................................................72, 73 51-3130H™.......................... Adhesin® 51-3130H™..........................................................72, 73 51-3130™............................ Adhesin® 51-3130™............................................................72, 73 51-5578™............................ Adhesin® 51-5578™............................................................72, 73 51-5654™............................ Adhesin® 51-5654™............................................................74, 75 56-5343™............................ Adhesin® 56-5343™............................................................74, 75 56-5531™............................ Adhesin® 56-5531™........................................................ 8, 72, 73 56-5545™............................ Adhesin® 56-5545™........................................................ 6, 72, 73 80-8309™............................ Technomelt® 80-8309™......................................................50, 51 80-8368™............................ Technomelt® 80-8368™......................................................50, 51 80-8448™............................ Technomelt® 80-8448™......................................................50, 51 80-8633™............................ Technomelt® 80-8633™......................................................50, 51 80-8697™............................ Technomelt® 80-8697™......................................................50, 51 80-8707™............................ Technomelt® 80-8707™......................................................48, 49 80-8795™............................ Technomelt® 80-8795™......................................................48, 49 80-8797™............................ Technomelt® 80-8797™......................................................48, 49 80-8804™............................ Technomelt® 80-8804™......................................................50, 51 80-8884™............................ Technomelt® 80-8884™......................................................50, 51 82-072A™/82-072B™......... Filter-Lok® 82-072A™/82-072B™.......................................62, 63 82-178A™/82-178B™......... Filter-Lok® 82-178A™/82-178B™.......................................62, 63 82-180A™/82-180B™......... Filter-Lok® 82-180A™/82-180B™.......................................62, 63 82-201A™/82-180B™......... Filter-Lok® 82-201A™/82-180B™.......................................62, 63 82-226A™/82-226B™......... Filter-Lok® 82-226A™/82-226B™.......................................62, 63 82-413A™/82-413B™......... Filter-Lok® 82-413A™/82-413B™.......................................62, 63 82-425A™/82-425B™......... Filter-Lok® 82-425A™/82-425B™.......................................62, 63 84-8843™............................ Technomelt® 84-8843™......................................................48, 49 86-7110™............................ Sanicare® 86-7110™...........................................................50, 51 86-8845™............................ Technomelt® 86-8845™......................................................50, 51 86-8848™............................ Technomelt® 86-8848™......................................................50, 51 91-004A™............................ Purmelt® 91-004A™............................................................52, 53 91-194B™............................ Purmelt® 91-194B™............................................................52, 53 91-798A™............................ Purmelt® 91-798A™............................................................52, 53 91-822A™............................ Purmelt® Purfect Glaze 91-822A™................................. 22, 52, 53 91-831B™............................ Purmelt® 91-831B™............................................................52, 53 91-834A™............................ Purmelt® 91-834A™............................................................52, 53 91-913A™............................ Purmelt® 91-913A™............................................................52, 53 99X™................................... Parcolene® 99X™......................................................................35 101™................................... Multan® PL 101™......................................................................47 104™................................... P3® 104™ Saf-T-Clean..............................................................41 110™ Cleaner....................... P3® Polyprep® 110™ Cleaner....................6, 14, 18, 22, 24, 26, 40 110™ Cold Stripper.............. P3® 110™ Cold Stripper.............................................................41 116™................................... P3® 116™ Saf-T-Clean..............................................................41 182A™................................. Aquence® 182A™................................................................36, 37 182B™................................. Deoxidine® 182B™....................................................................29 200™................................... Parco® Spray Wand 200™..........................................................32 200WB™.............................. P3® 200WB™ Paint Line Cleaner................................................40 200WB™ Stripper................. P3® 200WB™ Stripper...............................................................41 205™................................... P3® Polyprep® Rinse 205™........................................................40 220-WB™............................. Parco® Cleaner 220-WB™..........................................................46 222™................................... P3® 222™ Rik............................................................................41 283™................................... P3® Parcosol® 283™ Wipes.................................................18, 41 305™................................... Parco® Cleaner 305™................................................................28 319™................................... Parco® Cleaner 319™................................................................28 396HC™............................... Dorus® Permattach 396HC™................................................74, 75 400™................................... P3® Polyprep® Rinse 400™........................................................40 407™................................... Alodine® 407™..........................................................................34 412™................................... Ridoline® 412™.........................................................................28 500 LT™............................... Prep-N-Cote® 500 LT™..............................................................32 501™................................... P3® Prevox 501™......................................................................47 505™................................... P3® Prevox 505™......................................................................47 577WB™.............................. P3® Parcosol® 577WB™............................................................40 866IX™................................. Aquence® 866IX™.....................................................................38 866™................................... Aquence® 866™........................................................................38 908-38™.............................. Eccobond® 908-38™...........................................................64, 65 915IX™................................. Aquence® 915IX™.....................................................................38 915™................................... Aquence® 915™........................................................................38 925G™................................. Aquence® 925G™......................................................................38 930™................................... Aquence® 930™.................................................. 4, 12, 14, 24, 38 960H™................................. Terostat® 960H™.................................................................66, 67 962-US™.............................. Terostat® 962-US™..............................................................66, 67 1030HX-01™........................ Terocore® 1030HX-01™.......................................................68, 69 1070™................................. Bonderite® 1070™.....................................................................32 1090™................................. Bonderite® 1090™.....................................................................32 1297™................................. Terostat® 1297™.................................................................66, 67 1500™................................. Alodine® 1500™........................................................................34 1600™................................. Alodine® 1600™........................................................................34 1772™................................. Aquence® Cleaner 1772™....................................................36, 37 1811™................................. Terocore® 1811™................................................................68, 69 2010™................................. Bonderite® 2010™.....................................................................33 2101™................................. Bonderite® 2101™.....................................................................33 2102™................................. Terostat® 2102™ AC/BC™...................................................66, 67 2150™................................. Aquence® 2150™......................................................................39 2226™................................. P3® 2226™ Maintenance Cleaner..............................................41 2227A™............................... P3® 2227A™ Oven Cleaner........................................................41 2250UF™............................. P3® 2250UF™ E-Coat Cleaner...................................................41 2255™................................. P3® 2255™ E-Coat Cleaner.......................................................41 2280™................................. P3® Parco® 2280™ Cleanup.......................................................41 2300™................................. Terokal® 2300™..................................................................58, 59 2384™................................. Macromelt® 2384™............................................. 8, 16, 24, 48, 49 2400™................................. Terokal® 2400™..................................................................58, 59 2451™................................. P3® Baffle Coating 2451™.........................................................41 2474™................................. P3® 2474™ Peelable Masking....................................................41 2484™................................. P3® Clear Masking 2484™.........................................................41 2486™................................. P3® 2486™ Peelable Masking....................................................41 2498™................................. P3® 2498™ Peelable Masking....................................................41 2520™................................. Parco® Purge 2520™.................................................................29 2530™................................. Parco® Cleaner 2530™..............................................................29 2592™................................. Aquence® 2592™................................................................36, 37 2599™................................. Aquence® 2599™................................................................36, 37 2600™................................. Aquence® 2600™................................................................36, 37 2600™ Alodine®................... Alodine® 2600™........................................................................34 2615™................................. P3® Polyprep® 2615™ Cleaner...................................................40 2751™................................. Terophon® 2751™...............................................................68, 69 2761™................................. Terostat® 2761™.................................................................22, 26 2810™................................. Aquence® 2810™................................................................36, 37 2819™................................. Aquence® Cleaner 2819™....................................................36, 37 2860™................................. Aquence® 2860™................................................................36, 37 3005™................................. Terokal® 3005™..................................................................58, 59 3105™................................. Multan® 3105™...................................................................42, 43 3293™................................. P3® Polyprep® 3293™ Cleaner...................................................40 3416™................................. Aquence® 3416™......................................................................39 3781™................................. Adhesin® 3781™ WB Bonding Adhesive...............................70, 71 4000-F™.............................. Terostat® 4000-F™..............................................................66, 67 4141™................................. P3® Prevox 4141™....................................................................47 Index
MS 939™............................. Terostat® MS 939™........................................... 26, 60, 61, 68, 69 MS 9360™........................... Terostat® MS 9360™...........................................................60, 61 MS 9371™........................... Terostat® MS 9371™...........................................................60, 61 MS 9380™........................... Terostat® MS 9380™...........................................................60, 61 MS 9399™........................... Terostat® MS 9399™...........................................................60, 61 M™...................................... Fixodine® M™............................................................................30 NT-1™.................................. Bonderite® NT-1™.................... 4, 6, 10, 14, 16, 18, 22, 24, 26, 31 PL 298™............................... Multan® PL 298™.......................................................... 16, 44, 45 PL 1439™............................. Multan® PL 1439™........................................................ 10, 44, 45 Q 80-8668™......................... Technomelt® Q 80-8668™...................................................50, 51 Q 5613™.............................. Macromelt® Q 5613™..........................................................50, 51 QR-4663™........................... Purmelt® QR-4663™...................................................... 22, 52, 53 QR-4668™........................... Purmelt® QR-4668™............................................................52, 53 R-200F+™........................... Purmelt® R-200F+™............................................................52, 53 R-246C™.............................. Purmelt® R-246C™..............................................................52, 53 R-607™................................ Purmelt® R-607™................................................................52, 53 R-608C™.............................. Purmelt® R-608C™..............................................................52, 53 R-623™................................ Purmelt® R-623™................................................................52, 53 R-629™................................ Purmelt® R-629™................................................................52, 53 R-630™................................ Purmelt® R-630™................................................................52, 53 R-633™................................ Purmelt® R-633™................................................................52, 53 RT-153™.............................. Ridoline® RT-153™....................................................................28 RT-163™.............................. Ridoline® RT-163™....................................................................28 RT-173s™............................ Ridoline® RT-173s™..................................................................28 RT-173™.............................. Ridoline® RT-173™....................................................................28 SA-463™.............................. Terostat® SA-463™..............................................................66, 67 SA-490™.............................. Terostat® SA-490™..............................................................66, 67 SA-491™.............................. Terostat® SA-491™..............................................................66, 67 SA-4510™............................ Terostat® SA-4510™............................................................66, 67 SA-7648™............................ Adhesin® SA-7648™............................................................70, 71 SA-9627™............................ Adhesin® SA-9627™............................................................70, 71 SIA-110™............................. Macroplast® SIA-110™.................................................. 18, 56, 57 SIA-111™............................. Macroplast® SIA-111™........................................................56, 57 SIA-113SHV™....................... Macroplast® SIA-113SHV™..................................................56, 57 SIA-114™............................. Macroplast® SIA-114™........................................................56, 57 SIA-115™............................. Macroplast® SIA-115™........................................................56, 57 SIA-116™............................. Macroplast® SIA-116™........................................................56, 57 SIA-117™............................. Macroplast® SIA-117™........................................................56, 57 SIA-119™............................. Macroplast® SIA-119™........................................................56, 57 SIA-485B™........................... Adhesin® SIA-485B™ Anti-Wick...........................................74, 75 T 5900™.............................. Alodine® T 5900™.....................................................................34 TB-408™.............................. Dorus® Tancotard TB-408™.................................................74, 75 TecTalis®............................... Bonderite® TecTalis®......................................................... 8, 10, 31 UK-1340™............................ Macroplast® UK-1340™................................................. 26, 56, 57 UK-5401™............................ Macroplast® UK-5401™................................................. 26, 56, 57 UK-8103™ & UK-5400R™... Macroplast® UK-8103™ & UK-5400R™................... 56, 57, 62, 63 UR 8224S™.......................... Macroplast® UR 8224S™.....................................................56, 57 UR-8229L™.......................... Macroplast® UR-8229L™.....................................................56, 57 UR-8331™............................ Macroplast® UR-8331™.......................................................56, 57 UR-8332™............................ Macroplast® UR-8332™.......................................................56, 57 UR-8340™............................ Macroplast® UR-8340™.......................................................54, 55 UR-8341™............................ Macroplast® UR-8341™.......................................................54, 55 UR-8342™............................ Macroplast® UR-8342™.......................................................54, 55 UR-8343™............................ Macroplast® UR-8343™.......................................................54, 55 UR-8344™............................ Macroplast® UR-8344™.......................................................54, 55 UR-8345D™......................... Macroplast® UR-8345D™....................................................54, 55 UR-8345™............................ Macroplast® UR-8345™.......................................................54, 55 UR-8346™............................ Macroplast® UR-8346™.......................................................54, 55 UR-8347™............................ Macroplast® UR-8347™.......................................................54, 55 UR-8348™............................ Macroplast® UR-8348™.......................................................54, 55 UR-8349™............................ Macroplast® UR-8349™.......................................................54, 55 XA-7584™............................ Adhesin® XA-7584™ Black..................................................70, 71 XA-7594™............................ Adhesin® XA-7594™ Black............................................ 10, 70, 71 XA-7595™............................ Adhesin® XA-7595™ Black..................................................70, 71 XA-7597LV™........................ Adhesin® XA-7597LV™........................................................70, 71 XA-7597™............................ Adhesin® XA-7597™...................................................... 10, 70, 71 XA-7597™ Grey.................... Adhesin® XA-7597™ Grey....................................................70, 71 XA-7598™............................ Adhesin® XA-7598™............................................................70, 71 X™....................................... Prepalene™ X™........................................................................30 ZM-1™................................. Bonderite® ZM-1™.....................................................................33 ZM-2™................................. Bonderite® ZM-2™.....................................................................33 ZX-1™.................................. Parco® Cleaner ZX-1™...............................................................28 ZX-3™.................................. Parco® Cleaner ZX-3™...............................................................28 Products
4555B™............................... Terokal® 4555B™.............................14, 16, 18, 24, 58, 59, 68, 69 4595™................................. Alodine® 4595™........................................................................34 5011™................................. Terokal® 5011™..................................................................58, 59 5088™................................. P3® Neutracare® 5088™............................................................46 5089™................................. Terokal® 5089™..................................................................58, 59 5175™................................. P3® Neutracare® 5175™............................................................46 5200™................................. Alodine® 5200™........................................................................34 5600D™............................... Multan® 5600D™.................................................................42, 43 5700™................................. Alodine® 5700™..................................................................24, 34 5800™................................. P3® Prevox 5800™....................................................................47 6072™................................. Macromelt® 6072™.............................................................48, 49 6100G™............................... Terostat® 6100G™...............................................................66, 67 6208S™............................... Macromelt® 6208S™..................................................... 22, 48, 49 6211™................................. Macromelt® 6211™.............................................................48, 49 6239™................................. Macromelt® 6239™.............................................................48, 49 7005™................................. Aquence® 7005™................................................................36, 37 7150™................................. Aquence® 7150™................................................................36, 37 7310™................................. Aquence® 7310™................................................................36, 37 7320™................................. Aquence® 7320™................................................................36, 37 7747™................................. Dorus® Vetak 7747™...........................................................74, 75 9069™................................. Macromelt® 9069™.............................................................48, 49 9103™................................. Multan® 9103™...................................................................42, 43 10004™............................... Terostat® 10004™...............................................................68, 69 10102™............................... Terostat® 10102™...............................................................68, 69 13003™............................... Terostat® 13003™...............................................................68, 69 15101™............................... Terostat® 15101™...............................................................68, 69 16301™............................... Terocore® 16301™..............................................................68, 69 18101™............................... Terophon® 18101™.............................................................68, 69 19004™............................... Terostat® 19004™...............................................................68, 69 20003™............................... Terocore® 20003™..............................................................68, 69 20101™............................... Terocore® 20101™..............................................................68, 69 21007™............................... Terophon® 21007™......................................................... 4, 68, 69 21301™............................... Terophon® 21301™.............................................................68, 69 22100™............................... Terophon® 22100™.............................................................68, 69 23100™............................... Terophon® 23100™.............................................................68, 69 27006™............................... Terostat® 27006™...............................................................68, 69 A 56-5532™......................... Adhesin® A 56-5532™.........................................................74, 75 A 56-5533™......................... Adhesin® A 56-5533™.........................................................72, 73 A-304-6™............................ Eccobond® A-304-6™..........................................................64, 65 A-304-40™.......................... Eccobond® A-304-40™........................................................64, 65 A-316-20™.......................... Eccobond® A-316-20™........................................................64, 65 A-316-30™.......................... Eccobond® A-316-30™........................................................58, 59 A-316-43™.......................... Eccobond® A-316-43™........................................................64, 65 A-316™................................ Eccobond® A-316™.............................................................64, 65 A-329-1™............................ Eccobond® A-329-1™..........................................................58, 59 A-359™................................ Eccobond® A-359™.............................................................58, 59 A-500™................................ Deoxidine® A-500™...................................................................29 AW-5474™........................... Dorus® AW-5474™ Anti-Wicking Compound........................70, 71 B-204™................................ Multan® B-204™....................................................... 4, 16, 42, 43 B-236™................................ Multan® B-236™.................................................................42, 43 B-400™................................ Multan® B-400™............................................... 12, 14, 26, 42, 43 B-414™................................ Multan® B-414™........................................................... 16, 42, 43 Cleaner 2............................... Purmelt® Cleaner 2...............................................................52, 53 CR 10™................................ Multan® CR 10™..................................................................42, 43 CR 26™................................ Multan® CR 26™..................................................................42, 43 E2™..................................... Aquence® E2™..........................................................................39 E3™..................................... Aquence® E3™..........................................................................39 E3030™............................... Bondmaster® E3030™.........................................................64, 65 E3346™............................... Bondmaster® E3346™.........................................................64, 65 E3520™............................... Bondmaster® E3520™.........................................................64, 65 EC2™................................... Alodine® EC2™.......................................10, 12, 14, 16, 22, 26, 34 EM-357US™......................... Technomelt® EM-357US™...................................................50, 51 EM-377US™......................... Technomelt® EM-377US™...................................................50, 51 ETP 3400™........................... Bondmaster® ETP 3400™....................................................64, 65 F 981ND™............................ Multan® F 981ND™..............................................................44, 45 F 985™................................. Multan® F 985™.............................................................. 8, 44, 45 F 2004™............................... Multan® F 2004™.............................................. 14, 16, 22, 44, 45 F 4510™............................... Multan® F 4510™................................................................44, 45 F 4768™............................... Multan® F 4768™................................................................44, 45 F 6740™............................... Multan® F 6740™............................................................ 6, 44, 45 F 7270™............................... Multan® F 7270™................................................................44, 45 HCS10™............................... Parco® Cleaner HCS10™............................................................28 LAW-2522™......................... Adhesin® LAW-2522™.........................................................72, 73 LT-10™................................. Parco® Lubrite® LT-10™.............................................................33 MS 930™............................. Terostat® MS 930™....................................4, 6, 22, 60, 61, 68, 69 MS 935™............................. Terostat® MS 935™................................................. 60, 61, 68, 69 81
USA
Canada
For technical assistance,
call 866.332.7024
For technical assistance, call
905.814.6511, ext 7406
For technical data sheets,
visit www.henkelna.com/tds or
call 866.332.7024
For technical data sheets,
visit www.henkelna.com/tds or
call 905.814.6511
For MSDS’s, visit
www.henkelna.com/industrialmsds
or call 248.583.9300, ext 4.
For MSDS’s, visit
www.henkelna.com/industrialmsds
or call 905.814.6511
To place an order, check order status
or inquire about product availability,
call 800.521.1355 or send an e-mail
to [email protected]
To place an order, check order status
or inquire about product availability,
call 800.263.5043 or send an e-mail to
[email protected]
Henkel Corporation
1001 Trout Brook Crossing
Rocky Hill, CT 06067
Tel: 860.571.5100
Fax: 860.571.5465
Henkel Canada Corporation
2225 Meadowpine Boulevard
Mississauga, Ontario L5N 7P2
Tel: 905.814.6511
Fax: 905.814.5391
Henkel Corporation
32100 Stephenson Highway
Madison Heights, MI 48071
Tel: 248.583.9300
Fax: 248.583.7024
Henkel Corporation
32100 Stephenson Highway
Madison Heights, MI 48071
U.S.A.
www.henkelna.com/industrial
and TM designate trademarks of Henkel Corporation or its Affiliates. ® = registered in the U.S.
Patent & Trademark Office. © 2009, Henkel Corporation. All rights reserved. 5824 LT-5142 07/2009
®