Mighty 193 Long (New Name: Carboguard® 193 Long) -Interval-free, high-build epoxy resin paint- Selection Data Specification Data Solid Content: Generic Type: Epoxy/ polyamide amine General Properties: An interval-free epoxy primer with wide recoat window. ・ As a maximum, 180 days of interval between coats ・ Free of harmful heavy metal ・ Excellent adhesion to steel and nonferrous substrates ・ “Low VOC paint” (Weight solid ≥ 70%) (by volume, %) (by weight, %) 51 70 Density (g/ cm3): 1.39±0.05 VOC (g/ L): 417 DFT* (brush, μm): (spray, μm): 50 100 Theoretical Coverage (g/ m2): Recommended Uses: Steel structures, concrete substrates, equipment and machinery of nuclear power plants, food plants, breweries, paper mills and other industries (brush, DFT* 50 μm) (spray, DFT* 100 μm) 137 273 Practical Coverage ** (g/ m2): Not Recommended For: Immersion services Splash of solvents or strong acids (brush, DFT* 50 μm) (spray, DFT* 100 μm) 210 490 Wet/ Dry: 1.96 Sag Resistance (Dry, μm): 250 Gray, White Chemical Resistance: Exposure Splash & Spillage Fumes Acids Good Very Good Color: Alkalis Good Excellent Solvents Very Good Excellent Salts Excellent Excellent Water Excellent Excellent * DFT: Dry Film Thickness **: “Practical Coverage Rates” are estimates based on average results. Individual results may vary based on several issues including the shape and location of the item being painted as well as environmental conditions like temperature, humidity and wind. The skill level of those applying the paint will also impact the final results. For details, consult Japan Carboline staff. Heat Resistance: Continuous Flexibility: 120°C Good (Excellent > Very Good > Good > Fair > Poor > Not Recommended) Apr 2015 To the best of our knowledge the technical data contained herein is true and accurate at the date of publication and is subject to change without prior notice. User must contact JAPAN CARBOLINE to verify correctness before specifying or ordering. No guarantee of accuracy is given or implied. We guarantee our products to conform to Carboline quality control. We assume no responsibility for coverage, performance or injuries resulting from use. Liability, if any, is limited to replacement of products. Prices and cost data, if shown, are subject to change without prior notice. NO OTHER WARRANTY OR GUARANTEE OF ANY KIND IS MADE BY THE SELLER, EXPRESSED OR IMPLIED, STATUTORY, BY OPERATION OR LAW, OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Mighty 193 Long (Carboguard® 193 Long) Page 2 Curing Schedule & Pot Life: Application Guidance Surface Preparation: General Remove any oil or grease from surface to be coated with clean rags soaked in Carboline Thinner #2. Steel ISO Sa 2 (Surface profile: 25-50 m Application Equipment: Airless spray, Air spray, Brush, or Roller Surface Temp. (°C) Pot Life (Hrs.) Curing Time (Hrs.) Dry to recoat 5 20 36 36Hrs.-180Days 10 16 24 24Hrs.-180Days 20 8 12 12Hrs.-180Days 30 4 6 6Hrs.-180Days When temperature is 10°C or lower, heating may be required for proper curing. Airless Spray: Pump Ratio: Secondary Pressure: Tip Size: Filter Size: Thinning: Appropriate Viscosity: 30 : 1 12-18 MPa 0.017-0.021” 50 Mesh (if needed) up to 10% (by weight) 1-2 Pa・s (10-20 Poise) Thinning: May be thinned with Carboline Thinner #15. For extremely warm or windy conditions, may be thinned with #33 in order to prevent spray dusts and/or bubbling. Use of thinners other than those supplied or recommended by JAPAN CARBOLINE may adversely affect product performance and void product warranty, whether expressed or implied. Packaging, Handling & Storage Packaging: 20 kg Kit 17 kg 3 kg Part A: Part B: Flash Point: Part A: Part B: Carboline Thinner #15: Carboline Thinner #33: Shelf Life: 15°C 18°C 27°C 35°C 12 months Recommended Paint Specifications: Mighty 193 Long/ Carbomastic Color II/ Carboline 134HS Carbozinc 11/ Mighty 193 Long/ Carboline 134HS Application Conditions: Condition Material (°C) Surface (°C) Ambient (°C) Humidity (%) Normal 18-29 18-29 18-29 0-80 Minimum 10 10 10 0 Maximum 32 57 43 90 JAPAN CARBOLINE CO., LTD. Head Office 1-1-5, Fukagawa, Koto-ku, Tokyo 135-0033 TEL: 0-3643-4501 Osaka Office 1-26-28, Minamitsukaguchi-cho Amagasaki-city, Hyogo, 661-0012 TEL: 06-6424-1850 Apr 2015 CAUTION: CONTAINS FLAMMABLE SOLVENTS. KEEP AWAY FROM SPARKS AND OPEN FLAMES. IN CONFINED AREAS, WORKMEN MUST WEAR FRESH AIRLINE RESPIRATORS. HYPERSENSITIVE PERSONS SHOULD WEAR GLOVES OR USE PROTECTIVE CREAM. ALL ELECTRIC EQUIPMENTS AND INSTALLATIONS SHOULD BE GROUNDED. IN AREAS WHERE EXPLOSION HAZARDS EXIST, WORKMEN SHOULD BE REQUIRED TO USE NONFERROUS TOOLS AND TO WEAR CONDUCTIVE AND NON-SPARKING SHOES.
© Copyright 2024