T A B L E S Standard Wall-Mounted Table W and an Bench Systems Model Shown: Pocket: 86R031412 Table: 40M03293014 Bench: 42M03171214 palmer hamilton M O B I L E F O L D I N G FEATURES Mullion locks secure tables/benches from unauthorized use. Auto-lock secures tables/benches in pockets during storage. Field-adjustable down-latch locks automatically in down position. Track-Lock® means one-step release from wall pocket and convenient, secure return. Hamilton Series tables feature spring "Lift Assist System™" for smooth, controlled set-up. Surfaces of tables and benches are free of "lock holes", making them sanitary and tamper resistant. Center legs have rubber cushioned feet that prevent movement and protect the floor. Tops feature Wilsonart® laminate for superior abrasion resistance. Meets or exceeds NEMA specifications. Edges are finished with EdgeGuard™, providing superior resistance to moisture and eliminating unsanitary food traps. Powdercoat metal finish colors are Black or Chameleon. Wheelchair-accessible models available. OPTIONS Additional laminate colors and patterns available, including Formica®, Pionite® or Nevamar® surfaces call for quote. Standard Stock Laminate Selections* Gray Glace Golden Oak Winchester Walnut Bluejay Frame Color Options 1 2 3 1. Chameleon 2. Black 3. Chrome *Refer to sample chip for actual color CUSTOM SCHOOL LOGOS! Safe Operation Limited Access Tables and benches both feature the Lift Assist System for safe, controlled handling. New mullion lock secures tables/benches in stored position preventing unauthorized use. Extra Security Ease of Operation New auto-lock automatically secures tables/benches while in storage position and simplifies release. EdgeGuard™ Flexible Operation Secure Landing Superior Edging New field-adjustable down latch gives flexibility to adjust table to varying floor conditions. Center leg cushioned rubber feet prevent bench movement when in use and protect the floor. EdgeGuard™ is a polyurea material bonded to the tabletop and benches for a sealed edge. RECESSED (IN-WALL) Model Number 87” 60” 6” 87” 60” 11-1/2” 87-3/8” 61-3/4” 11-1/8” 86R031424 87” 60” 17” 87-3/8” 61-3/4” 16-11/16” 86R031436 87” 60” 22-1/2” 87-3/8” 61-3/4” 22-1/4” 86R031448 86R031412 57-3/4” AGAINST WALL* Rough Opening H W Pocket Size Model Number D N/A N/A N/A 89-3/8” / 87-3/8” 61-3/4” 6” 87A031412 N/A N/A N/A 89-3/8” / 87-3/8” 61-3/4” 11-9/16” 87A031424 N/A N/A N/A 89-3/8” / 87-3/8” 61-3/4” 17-3/16” 87A031436 57-3/4” *Sloping top cap standard Length Height Width Model No. Table 168" 168" 27" 29" 30" 30" 40M03273014 40M03293014 Bench 168" 168" 15" 17" 12" 12" 42M03151214 42M03171214 Note: All dimensions are nominal Seating capacity: 16-20 per table palmer HAMILTON,LLC 800-788-1028 ©1207/PHCS innovative cafeteria solutions For a complete listing of all our products, visit our interactive website at palmerhamilton.com T A B L E S D F O L D I N G Pocket Size H W D 87-3/8” 61-3/4” 5-9/16” W Warranty PALMER HAMILTON warrants that its products shall be free from defects in original material and workmanship for a period of fifteen years from the original shipment date. This warranty shall not apply to normal wear and tear or in the event products are damaged as a result of misuse, abuse, vandalism, neglect, accident, improper application, and modification or repair by persons not authorized by PALMER HAMILTON. The company will, at its discretion, repair or replace any defects. Any repair or replacement must be approved in advance by the factory before any action is taken. There are no implied warranties of fitness or merchantability, and there are no other express warranties beyond the warranties expressed here. M O B I L E Rough Opening H
© Copyright 2024