FALL PROTECTION
Harnesses........................................ 229 - 234
Lanyards.......................................... 235 - 237
Self-Retracting Lanyards................ 238 - 239
Anchorage Connectors............................240
Horizontal / Vertical .
Lifelines......................................... 241 - 242
Rescue Equipment....................................243
Confined Space Equipment.....................244
Lanyard
Harness
What do I want?
Comfort. You want the perfect fit. To ensure a perfect fit, harnesses are
available in different sizes. A standard size will fit most workers. Ease
of Use. You want a harness that is easy for you to get into and adjust. A
vest-style harness is put on like a jacket. The choice of style is a matter
of personal preference. There are different types of leg strap connections
available on a harness:
• Qwik-Fit (mating buckle)
• Tongue-Buckle
Both styles offer a fast and easy connection and adjustment. The choice
of leg strap connections is a matter of personal preference. You also have a
choice of D-Ring configurations on a harness: Back D-Rings (required on
every harness) and hip (side) D-Rings. General D-Ring usage is as follows:
• Back D-Ring. This is the attachment point for your lanyard. It can also
be used as a rescue attachment.
• Hip (side) D-Rings. Typically used for workpositioning activities to
allow the worker to have their hands free to perform work, or for travel
restriction applications.
• How do I know which to choose?
• There are two primary types of lanyards:
• Shock-absorbing lanyards are used when the free fall distance (fall
hazard) can exceed 2 feet.
• Restraint or positioning lanyards are used only when free fall distance
(fall hazard) can be limited to 2 feet or less.
In choosing the correct lanyard, you must keep the application in mind.
• Make certain the lanyard is the proper length to allow the necessary
worker movement/positioning.
• Make certain that the right material type is chosen (depending on your
work environment).
• Make certain you have calculated your total fall distance.
• You also need to consider the compatibility of the system components.
The best way to ensure compatibility is to purchase all components
from the same manufacturer.
Connector
How do I know which to choose?
Connector selection is driven primarily by application. You will need to
carefully consider your work environment , in particular the type of structure where the connector will be attached.
Weight should also be a consideration if a worker will need to carry the
connector around during the work day.
In addition, you will need to consider the number of workers required
to attach to the connector. Most connectors are rated for 1 person with a
5,000 pound minimum breaking strength.
Product Sizing
Most harnesses listed in
this catalog are Standard
(STD) Size. Other sizes
are available for weight
capacities up to 360
lbs.* Custom harnesses
are available up to a 400-lb
weight capacity at no additional charge (custom harnesses with weight capacities of 361 - 400 lbs are priced at the SXL harness size).
*360 lb weight capacity applies to size SXL harnesses and excludes all Gravity Harnesses and Derrick Harnesses. Gravity and Derrick harnesses must be custom
ordered for weight capacities above 310 lbs. When ordering a harness for a worker exceeding 310 lbs, a custom shock-absorbing lanyard, designed for the weight of the
individual, must also be ordered.
Phone: 800-MALLORY
Fax: 360-577-4244
WWW.MALLORYCO.COM
229
Fall PROTECTION – introduction
Making Fall Protection as easy
as 1, 2, 3 . . .
HarnessES – Fall PROTECTION
Workman™ Harness
The Workman Harness provides
comfortable protection, due to its
lightweight components and durable
webbing. The vest-style harness,
with optional hip D-Rings for work
positioning, fits a wide range of
body types and sizes. Color-contrasting thigh and torso straps simplify
donning.
• Optimum comfort at an economical price
• Abrasion-resistant, strong, durable webbing
• Yellow polyester webbing for high visibility
• Web retainer collars to keep excess webbing neat
• Easy to don and adjust
• Qwik-Fit™ chest strap with Tongue-Buckle leg straps for easy adjustment
• Back attachment points
• Meets OSHA regulations, ANSI A10.32 & ANSI Z359.1, and is certified to CSA Z259.10-M90
Please state size when ordering.
Item
Description
10072487 Workman Harness
10072488 Workman Harness
Size
Price
Standard XL
$42.03
$42.96
415420
Classic Tradesman™
Harness
Great for prolonged work
positioning and comfort when
carrying heavy tool loads. Available as a kit or as individual components. Kits include harness,
either Vestype™ or Pullover,
custom back pad, body belt, and
tool belt support straps. Meets
applicable ANSI and OSHA
standards. Models with CSA
part numbers are CSA certified.
Kits include Custom Back Pad,
Body Belt, and Tool Belt Support Straps.
FP Pro® Vest Style Harness
The FP Pro™ Harness provides comfortable protection due to its lightweight features.
• Bright red polyester webbing for high visibility
• Back D-Ring
Item
Description
Price
415947
Standard size, qwik-fit™ leg straps
$51.60
The TechnaCurv® Full Body
Harness
Used for fall arrest, work positioning, travel
restriction, ladder climbing, rescue retrieval and
evacuation.
The TechnaCurv™ Full Body Harness throws a
curve to the ordinary harness with many new features never before seen in a full body harness, such
as Curvilinear Comfort System, elastic shoulder
padding, innovative web design, Secure-Fit buckles,
and Sorbtek fabric on shoulders. Meets ANSI
Z359.1, all OSHA regs. and is CSA certified.
Item
Description
10041599 Technacurv™ Harness
415236
Item
Description
415225
415236
Vestype Harness Kit
1-Back/0-Chest/Tongue buckles
Pullover Harness Kit
1-Back/1-Chest/Tongue buckles
Price
$234.30
$234.30
Tradesman Harness Components
Part number for L. Size S, M, and XL are also available. Please state size when
ordering.
415420
1/34” Belt, polyester, tounge buckle
$28.53
415803
Deluxe leather back support pad (requires 1/34” belt to attach to harness; see above item.)
$123.60
230
S
32”-41”
M
36”-45”
1-5
$117.48
6+
$111.61
Gravity™ Rigger / .
Rescue Harness
Preferred by bridge workers. The harness incorporates a sit harness design which allows the user
a much higher degree of comfort while in the sit
position. The Gravity Rigger/Rescue Harness is
suitable for rappelling/control descent, positioning,
ladder climbing, rescue, and fall arrest. Black polyester webbing, cross-over design with integral belt.
Item
Description
1-5
SSH60930001
Gravity Riggers Harness
$229.41
L
40”-49”
Phone: 800-MALLORY
XL
44”-53”
XXL
50”-59”
Fax: 360-577-4244
6+
$217.94
For assistance in dertermining which harness accessories
are best for your application,
please call 1-800-MALLORY
Classic Harness Belt Size Chart
XS
26”-35”
415803
Part number for M size. Size XS, S, L, and XL are also available. Please state size
when ordering.
Size
Waist Inches
WWW.MALLORYCO.COM
Used for fall arrest, work positioning, travel restriction,
ladder climbing, rescue retrieval and evacuation. The PulloverTM and
VestypeTM harnesses are uniquely designed to contain the torso, position
it in an upright position, and distribute fall arrest forces to the sub-pelvic
area in the event of a fall. Color-contrasting 1-inch wide shoulder and
thigh straps simplify donning and doffing the harness. The standard size
fits most users. The Item Numbers shown are for “Standard” sizes; please
see chart on page 229 for other available sizes.
507144 Nylon Back Support Pad
Harness Accessories
Belts, back support pads, and comfort pads help protect and support
workers doing heavy physical work, and add comfort during long
periods of suspension or work positioning. Many styles are available, the
most common are listed below.
Pullover®
Harness
Item
The Classic Pullover harness
uses a patented design which
eases donning and doffing.
A single-point torso strap
adjuster, and the choice
of Qwik-Fit, tongue buckle,
or friction buckle leg straps
allows the user to adjust the harness snugly to the
body. Integrated systems (harnesses with shock
absorbers) are available upon request. All Pullover
Harnesses meet ANSI Z359.1, ANSI A10.14 and
OSHA requirements. Models with CSA part
numbers are CSA certified. Other D-ring configurations are available, ask
your representative at Mallory for more information.
Item
Description
502733
502734
Nylon, Tongue Buckle,
1-Back/1-Chest/2-Hip/0-Shoulder
Polyester, Tongue Buckle,
1-Back/1-Chest/2-Hip/0-Shoulder
Price
$86.97
$86.97
Description
Price
415420
1 3/4” Belt, Polyester tongue buckle - L
$28.53
415421
1 3/4” Belt, Polyester tongue buckle - M
$28.53
415422
1 3/4” Belt, Polyester tongue buckle - S
$28.53
415423
1 3/4” Belt, Polyester tongue buckle - XL
$28.53
(Back Support Pads require above listed belts)
415803
Large - Deluxe Leather Back Support Pad $123.60
415804
Medium - Deluxe Leather Back Support Pad $123.60
415805
Small - Deluxe Leather Back Support Pad $123.60
415806
X-Large - Deluxe Leather Back Support Pad $135.96
507119
Lanyard Pouch with hook and pile fastener $24.00
SSB30074039Comfort Pad, nylon, black, size S to M
$59.06
SSB30074040Comfort Pad, nylon, black, size L to XL
$59.06
507158
Protective D-ring Cover
$11.91
10028444
Shoulder Pad
$7.73
10043147
Double D-ring Extension
$29.91
507144
Economic Back Support Pad, Nylon
$37.87
507147
Comfort Pads for Shoulders or Thighs
$23.27
Delta™ II
Standard Vest-Style Harness
Vestype Harness
™
The Vestype harness contains
three torso strap adjustment
points and tongue thigh strap
buckles to adjust the harness
snugly to the body. Meets ANSI
Z359.1, ANSI A10.14 and
OSHA requirements. Other D-ring configurations
are available, ask your representative at Mallory
about your special requirements!
This lightweight harness is one of our most popular,
used for general fall protection in any industry.
• Stand-up back D-ring
• Adjustable non-slip chest strap with pass-thru
buckle
• Polyester webbing construction for added durability
• Zinc plated hardware for corrosion resistance
• Universal size
Item
Description
502757
502771
Nylon, Tongue Buckle, 1-Back/0-Chest/0-Hip/0-Shoulder
Nylon, Tongue Buckle, 1-Back/1-Chest/2-Hip/0-Shoulder
Price
$81.84
$98.37
Phone: 800-MALLORY
Item
Description
Price
1102000 Vest Style Harness Tongue Buckle Leg Straps
$86.01
1102001 Vest Style Harness Parachute Buckle Leg Straps $89.00
Fax: 360-577-4244
WWW.MALLORYCO.COM
231
Fall PROTECTION – HarnessES
MSA Full Body Harnesses
HarnessES • Vests – Fall PROTECTION
1107975
1108600
1108500
Off-Shore Lifejacket
These lifejackets are ideal for day or night use,
when you already have your fall protection harness
and need both visibility and flotation protection.
ExoFit™ Full
Body Harness
The ExoFit™ design is
based on the concept
of a single piece of
material constructed in the shape of an “X” that wraps around you for
the ultimate in no-tangle security.
From the moment you put it on, the ExoFit exceeds anything you’ve ever
worn in a fall protection harness. The materials are soft and light-weight,
yet extremely durable. The shoulder, hip and leg padding is built-in so it
can’t slip. The breathable Dri-lex® lining guarantees you’ll stay dry and
comfortable every day. And the quick-release buckles are fast, efficient and
totally secure!
Vest-Style Harnesses Loops for belt, quick-connect buckles, back D-ring
Item
Description
1107975
1107976 1107977
Small Medium
Large
Loops for belt, quick-connect buckles, Vertical Chest Strap D-ring, back
& side D-rings
Description
1108600
1108601
1108602
Small Medium
Large
Price
$211.55
$211.55
$211.55
Construction-Style Harnesses
Back D-rings, sewn-in back pad and belt with side D-rings, quick-connect
buckles
Item
Description
1108500
1108501
1108502
1108507
Small Medium
Large
X-Large
Price
$223.86
$223.86
$223.86
$235.05
Construction
Vest Style Harness
Price
$164.20
Hi-Vis WorkVest & Harness
WorkVest incorporates a sleeveless waist length
vest. The chest, shoulder, and leg buckles are
visible, allowing the worker to properly fit and
easily adjust it, and you can also easily see if your
workers are connected and protected.
• Certified Hi-Vis fabric and reflective tape, meeting
Class 1 and 2 high visibility requirements
• Back D-ring
• Parachute buckles on lower shoulder straps
• Tongue buckle leg straps for fast and easy donning
• Polyester webbing construction for added durability
• Coated hardware for corrosion resistance
• Size = Large Vest / Universal Harness
Item
Description
1107404 Large Hi-Vis WorkVest & Universal Harness
Price
$239.61
• Snap-On Hi-Vis WorkVests may be used with
a variety of harnesses including our Delta NoTangle™ harnesses that offer greater comfort and
added safety
• Snap-on style makes attaching the harness simple,
the snaps hold the harness straps in place, preventing twisting/tangling
• Size = Large
• Meets ANSI/ISEA 107-1999
Item
Description
1101655 1101654 1101656 Large - Construction Vest-Style Harness
Medium - Construction Vest-Style Harness
X-Large - Construction Vest-Style Harness
Phone: 800-MALLORY
Off-Shore Lifejacket Add a workvest to your existing harness
Stand-up back D-ring
Tongue buckle body belt and side D-rings
Adjustable non-slip chest strap with pass-thru buckle
Parachute buckles on lower shoulder straps
Tongue buckle leg straps
Polyester webbing
Coated hardware for corrosion resistance
232
Description
9500468 Hi-Vis Snap-On WorkVest
With the addition of a body belt and pad
with side D-rings, shoulder pads, this
harness is ideal for general construction
applications where fall protection and
positioning is needed.
•
•
•
•
•
•
•
Item
Price
$188.05
$188.05
$188.05
Vest-Style Harnesses Item
• D-ring opening
• Certified Hi-Vis orange fabric and solas grade
reflective tape
• Foam-filled head support collar with two vertical
adjustable straps and hinged back panel – includes
safety whistle
• Polyvinyl chloride foam buoyant material provides
a minimum buoyant force of 22 pounds (98
newtons)
• Size = Universal (Adult)
• Inspected and tested in accordance with U.S. Coast Guard regulations. Catalog No. 1600 Type 1, U.S. Coast Guard Approval No.
160.055/187/0. UL listed Issue No. B-8050
Price
$142.23
$142.23
$149.34
Item
Description
9500254
9500251
9500429
9500429
Snap-On Workvest Solid Orange
Snap-On WorkvestSolid Green
Snap-On WorkvestHi-Vis orange mesh
Snap-On WorkvestHi-Vis Green mesh
Fax: 360-577-4244
WWW.MALLORYCO.COM
Price
$102.80
$102.80
$94.23
$94.23
• Self-Contained Label Pack
• Web Finials
The Miller Revolution Harness reinvents harness safety and functionality with
features developed to meet key, user-identified needs.
While exceeding worker expectations in comfort, fit, ease-of-use, style, durability, compliance, flexibility and convenience, the Miller Revolution Harness
provides over 11 key product features from seven new, unique components:
• ErgoArmor™
Back Shield
• Integrated Accessory System
• Cam Buckle
• PivotLink™ Connection
Miller Revolution Harness with Dual Tech™ Webbing
Item
Standard Features Special Features*
RDT-QC/U
RDT-TB/U
RDT-QC-B/U
RDT-TB-B/U
RDT-QC-DP/U
RDT-TB-DP/U
RDT-QC-BDP/U
RDT-TB-BDP/U
•Quick-Connect
Chest Buckles
• Cam Buckles
• ErgoArmor
Back Shield
• Stand-Up D-Ring
•Self-Contained Label Pack
•Web Finials
Price
Quick-Connect Buckle Legs
$206.05
Tongue Buckle Legs
$206.05
Removable Belt, Quick-Connect Buckle Legs
$231.80
Removable Belt, Tongue Buckle Legs
$231.80
Side D-Rings & Pad, Quick-Connect Buckle Legs
$244.80
Side D-Rings & Pad, Tongue Buckle Legs
$244.80
Removable Belt, Side D-Rings & Pad, Quick-Connect Buckle Legs
$270.80
Removable Belt, Side D-Rings & Pad, Tongue Buckle Legs
$270.80
Miller Revolution Harness with DuraFlex® Webbing
Item
Standard Features Special Features*
RDF-QC/U
RDF-TB/U
RDF-QC-B/U
RDF-TB-B/U
RDf-QC-DP/U
RDF-TB-DP/U
RDF-QC-BDP/U
•Quick-Connect
Chest Buckles
• Cam Buckles
• ErgoArmor
Back Shield
• Stand-Up D-Ring
•Self-Contained Label Pack
•Web Finials
RDF-TB-BDP/U
Price
Quick-Connect Buckle Legs
$206.05
Tongue Buckle Legs
$206.05
Removable Belt, Quick-Connect Buckle Legs
$231.80
Removable Belt, Tongue Buckle Legs
$231.80
Side D-Rings & Pad, Quick-Connect Buckle Legs
$244.80
Side D-Rings & Pad, Tongue Buckle Legs
$244.80
Removable Belt, Side D-Rings & Pad, Quick-Connect Buckle Legs
$270.80
Removable Belt, Side D-Rings & Pad, Tongue Buckle Legs
$270.80
Miller Revolution Harness with DuraFlex Python® Webbing
Item
Standard Features Special Features*
RPY-QC/U
RPY-TB/U
RPY-QC-B/U
RPY-TB-B/U
RPY-QC-DP/U
RPY-TB-DP/U
RPY-QC-BDP/U
•Quick-Connect
Chest Buckles
• Cam Buckles
• ErgoArmor
Back Shield
• Stand-Up D-Ring
•Self-Contained Label Pack
•Web Finials
RPY-TB-BDP/U
Price
Quick-Connect Buckle Legs
$206.05
Tongue Buckle Legs
$206.05
Removable Belt, Quick-Connect Buckle Legs
$231.80
Removable Belt, Tongue Buckle Legs
$231.80
Side D-Rings & Pad, Quick-Connect Buckle Legs
$244.80
Side D-Rings & Pad, Tongue Buckle Legs
$244.80
Removable Belt, Side D-Rings & Pad, Quick-Connect Buckle Legs
$270.80
Removable Belt, Side D-Rings & Pad, Tongue Buckle Legs
$270.80
Miller Revolution Harness with Kevlar®-Nomex® Webbing
Item
Standard Features
Special Features*
Price
RKN-QC/U
•Quick-Connect Chest Buckles
• Cam Buckles
• ErgoArmor Back Shield
• Stand-Up D-Ring
•Self-Contained Label Pack
•Web Finials
Quick-Connect Buckle Legs
$285.60
Tongue Buckle Legs
$285.60
Removable Belt, Quick-Connect Buckle Legs
$311.40
Removable Belt, Tongue Buckle Legs
$311.40
RKN-TB/U
RKN-QC-B/U
RKN-TB-B/U
Phone: 800-MALLORY
Fax: 360-577-4244
WWW.MALLORYCO.COM
233
Fall PROTECTION – HarnessES
• DualTech™ Webbing
HarnessES – Fall PROTECTION
Accessories
Item
Description
Price
RIA-T1
Mini Cell Phone Holder w/Snap-On Connector
$71.65
RIA-T2
Regular Cell Phone/Jobsite Radio Holder, w/Snap-On Connector
$82.25
RIA-T3
Water Bottle Holder, 1 Qt.
$71.65
RIA-T4
Large Open Bolt & Bull Pin Bag w/Quick-Release Tool Snap
$167.10
RIA-T5
Medium Open Bolt & Bull Pin Bag
$156.45
RIA-T6
2 Pocket Nail & Tool Pouch
$135.25
RIA-T7
Large Multi-Pouch Tool Bag w/2 Steel Hammer Loops
$220.10
RIA-T8
Padded Hammer Loop
$61.05
RIA-T9
Open End Pliers & Tool Holder
$61.05
RIA-T10
Zippered Cylindrical Utility Pouch
$82.25
Optional Padding
Item
Description
Price
RIA-P1
Shoulder/Leg Pads (2 pack)
$21.70
RIA-P2
Seat Pad
$49.10
Connection Points
Item
Description
Price
RIA-C1
Sliding Belt Accessory Connectors (3 pack)
$103.45
RIA-C2
Universal Accessory & Belt Attachment Clip (2 pack)
$50.40
Belts (Fits sizes 32” to 54”)
Item
Description
Price
RIA-B1
Belt with PivotLink Attachments, 5 Accessory Connectors
$50.90
RIA-B2
Belt w/pad and PivotLink Attachments, 5 Accessory Connectors
$80.95
Identification Kits
Item
Description
Price
RIA-BL
(10) Blue Self-Adhesive Labels w/Write-In Window
$20.80
RIA-YL
(10) Yellow Self-Adhesive Labels w/Write-In Window
$20.80
RIA-RD
(10) Red Self-Adhesive Labels w/Write-In Window
$20.80
RIA-GN
(10) Green Self-Adhesive Labels w/Write-In Window
$20.80
Model numbers listed are for Universal size.
Harnesses are also available in Small/Medium and XXL/XXXLarge, by replacing the “U” in the
model number with “S/M” or “XXL/XXXL” (Ex: RDT-QC-B/XXL/XXXL).
HARNESS SIZING CHART
Most popular size
For front D-ring vest-style option, add “FD” to the corresponding harness model number (Ex: RDTFD-QC/U).
All Miller brand fall protection products meet applicable OSHA, ANSI and CSA
requirements.
universal
(Lg/Xlg)
sml/Med
Rated to 400 lbs. (181.4kg) capacity.
234
*Special Features
XXL/
XXXL
Phone: 800-MALLORY
Most popular size
Removable
Belt
Fax: 360-577-4244
Side D-Rings
& Pad
Quick-Connect Tongue Buckle
Buckle
WWW.MALLORYCO.COM
Tie-Back Lanyards
Integral Dyna-Brake shock absorber
Energy absorbing lanyards like Dyna-Brake® keeps fall arrest forces below
ANSI and OSHA limits and deceleration distance is controlled to a
maximum of 42 inches. This model featured is 6 foot x 1” wide nylon
webbing and has RL20 self-locking snap hooks on each end. Ask us about
other styles of Dyna-Brake® Lanyards.
The integral adjustable D-ring of the
MSA Tie-Back lanyard allows for a compatible means of connection, minimizes
the potential for roll-out, and eliminates
the necessity of a separate anchorage
connector, while accommodating a wide
variety of anchorage point shapes and sizes.
Item
Description
10011648
10021670
10021673
Tie-Back Lanyard
$68.71
Tie-Back Lanyard 1”strap 6’ fixed length Nylon, Dyna-Brake - HL2000 Harness & Anchorage
Connections $57.00
Tie-Back Lanyard 1”strap 6’ fixed length Nylon, Dyna-Brake - HL2000 Harness & (2) HL64 Anchorage Connections $128.00
Description
Price
501222
Dyna-Brake® Nylon Web Lanyard $68.43
Price
Rope Lanyard
Energy Absorbing
lanyards are a component
of a personal fall arrest
system. They provide a
means of connection between the back D-ring of a harness and a qualified
anchorage and anchorage connector. The energy absorber keeps fall arrest
forces below ANSI and OSHA limits and deceleration distance is controlled to a maximum of 42 inches. 6 foot length, adjustable 1/2” nylon
rope, with RL20 self-locking snap hooks on each end.
FP5K™ Tie-Back
Shock Absorbing
Lanyard
• Uses the FP5K Carabiner, a new tie-back lanyard
connector
• 5000 pound gate strength in any direction allows
the FP5K Carabiner to be tied back directly to the
lanyard
• Unique carabiner body shape helps avoid confusion
with standard connectors not designed for tie-back
applications
• FP5K carabiner design allows for maximum clearance inside the body of the carabiner (1” Gate
Opening)
• Web version utilizes Monster-Edge™ Webbing with 12,000 pound
minimum breaking strength and internal wear indicator that consists of
two yellow threads to alert a user when visiable, that the lanyard should
be removed from service due to severe abrasion
Item
Description
10047084 10047085 10047086 10047087 FP5K Tie-Back Lanyard, Nylon Web, 6’ Adjustable Length, with HL2000 snaphook on one end and FP5K Carabiner on the other end $80.00
Twin Leg FP5K Tie-Back Lanyard, Nylon Web, 6’ Adjustable Length, with HL2000 snaphook in center (attaches to back D-ring) and FP5K Carabiners on each leg
$125.00
FP5K Tie-Back Lanyard, Cable, 6’ Fixed Length, with HL2000 snaphook on one end and FP5K Carabiner on
the other end $86.00
Twin Leg FP5K Tie-Back Lanyard, Cable, 6’ Fixed
Length, with HL2000 snaphook in center (attaches to
back D-ring) and FP5K Carabiners on each leg$140.00
Phone: 800-MALLORY
Item
Price
Item
Description
501220
Dyna-Brake® Lanyard Price
$115.73
FP Diamond™ Expanyard
•
•
•
•
•
•
•
•
•
Elastic design reduces trip hazards and snag hazards
6’ Diamond Expanyard contracts to 4.5’
10’ Diamond Expanyard contracts to 7’
Durable polyester sheath for increased abrasion and UV resistance
Keeps fall arrest forces below 900 lbs
Highly visible deployment tag
Pouchless design
Available in both single and twin leg configurations
ATO ordering flexibility allows you to order the exact options, and only
the options, you want
Item
Description
10045936
10045938
6’ Polyester Expanyard with HL2000 Harness & Anchorage Connection
$56.21
6’ Polyester Expanyard Twin-Leg, with Swivel HL2000
Harness & (2) HL64 Anchorage Connection $150.08
Fax: 360-577-4244
WWW.MALLORYCO.COM
Price
235
Fall PROTECTION – LANYARDS
Dyna-Brake®
Energy Absorbing Lanyards
Nylon Web Lanyard
LANYARDs – Fall PROTECTION
Workman™
Energy-Absorbing
Lanyard
Workman energy-absorbing lanyards are lightweight with a low-profile
body. The shock absorber includes a clear, durable protective cover over
the labels to increase service life and allow for easy inspection.
• Tear-tape design to keep fall arrest forces below 900 lbs.
• Single-leg, adjustable configuration
• Harness and anchorage connection uses LC snap hook (20 mm gate
opening)
• Meets ANSI A10.32, ANSI Z359.1, applicable OSHA regulations, and
is certified to CSA Z259.11-05 E4
Item
Description
10072474 Workman Single-Leg Lanyard Expanyard™
Dyna-Brake®
Energy Absorbing
Lanyard
Price
$34.82
501574
Item
Description
Price
501574
Expanyard™ Dyna-Brake® Twin Leg Lanyard $99.00
Dyna-Brake Shock Absorber, with HL2000 Harness & Anchorage Connection
$56.00
Dyna-Brake Shock , twin-leg with HL2000 Harness & (2) HL2000 Anchorage Connection $112.56
Shock Absorbing Lanyards with 1/4” Wire Rope, Vinyl
Coated 6” fixed length
10021655 Dyna-Brake Shock , with HL2000 Harness & Anchorage Connection
$54.00
10021663
10015877
501562
FP Diamond Shock
Absorbing Lanyard
Adjustable length, Dyna-Brake Shock with HL2000 Harness & Anchorage Connection
$50.00
Adjustable length, Dyna-Brake Shock , twin-leg with HL2000 Harness & (2) GL3100 Anchorage Connection
$121.00
Adjustable length, Dyna-Brake Shock , twin-leg with RL20 Harness & (2) RL20 Anchorage Connection $94.00
Restraint
Lanyards
10044811
Restraint lanyards are primarily used for travel restriction and work positioning. Lanyards for travel restriction
are used to restrain a worker from reaching a fall hazard.
Lanyards for work positioning are used for stabilizing a
worker at an elevation. They can be ordered in fixed or
adjustable lengths. Each lanyard comes with a forged
steel, zinc-plated, self-locking snaphook attached to each
end. Our featured lanyard is made with 1/2” nylon rope,
and uses the new HL2000 snaphook hardware on each end, replacing the
L15 snaphook.
Description
Price
1” Nylon Strap Lanyard
505204
The FP Diamond shock absorbing
lanyard raises the standard for
shock absorbing lanyards.
6’ adjustable lanyard with HL2000 Harness & Anchorage Connection
$41.00
1/2” Nylon Rope Lanyard
505200
505201
Keeps fall arrest forces below 900 lbs
Available in a single or twin-leg configuration
Single-leg FP Diamond is bi-directional
Polyester, single piece construction, fixed length
Item
Description
10023932
10023971
6’ Polyester Lanyard with HL2000 Harness & Anchorage Connection
$44.88
6’ Polyester Lanyard Twin-Leg, with Swivel HL2000
Harness & (2) HL64 Anchorage Connection $139.23
Phone: 800-MALLORY
Price
505204
Item
™
236
Description
Nylon Shock Absorbing Lanyards with 6’ length & 1” Strap
Expanyard Shock Absorbing Nylon Lanyards .
with 6’ length & 1” strap
•
•
•
•
10021663
A component of a personal fall arrest system.
The lanyards are available
10015877
in strap, rope and wire rope
configurations with a variety
of snaphooks.
Principle(s) of Operation:
Dyna-Brake Energy Absorbing Lanyards provide a means of connection
between the back (dorsal) D-ring of MSA (FP) full body harnesses and a
qualified anchorage and anchorage connector. The energy absorber keeps
fall arrest forces below ANSI and OSHA limits and deceleration distance
is controlled to a maximum of 42 inches.
Item
Like the Rose Dyna-Brake®,
the new Expanyard™ eases
1001590
the shock of fall arrest reducing
deceleration stress. The important difference is that the Expanyard™ stretches to a six-foot length.
But when relaxed, it stays close to the
user’s body, reducing the possibility of trips
10021655
and snags. This Twin Leg Expanyard has
RL20 self-locking snap hooks on each end.
Other styles are available including Single leg Expanyard,
and vinyl-coated wire rope single and twin Expanyards.
10015900
10013456
Dyna-Brake® .
Energy Absorbing
Lanyards
Price
6’ fixed lanyard with RL20 Harness & Anchorage Connection 6’ adjustable lanyard with RL20 Harness & Anchorage Connection $50.00
$54.00
Rebar Assembly
10044811
Rebar chain assembly, GL3100 snaphook with 2.25” gate
SCH3187511 Rebar web assembly, 18” legs with sliding large snaphook
Fax: 360-577-4244
WWW.MALLORYCO.COM
$69.26
$58.53
Manyard® II
Stretchable Shock-Absorbing
Lanyards
Our EZ Stop® II shock absorbing lanyards are designed for versatility
and are available in many variations.
There is certain to be a model that will meet your fall arrest requirements
from this popular product line. All EZ Stop® II lanyards utilize a controlled tearing action when subjected to fall arrest forces, limiting arresting
forces to no more than 900 lbs.
• 1” polyester webbing for durability and longevity
• Easy to use self locking snap hooks at both ends
• Soft cover shock absorber for comfort
• 6 ft. in length
• Limits arresting forces to 900 lbs. or less
• Meets or exceeds all applicable industry standards including OSHA,
ANSI and the stringent ANSI Z359
Item
Description
1220006
1220077
EZ Stop® II Shock Absorbing Lanyard $61.48
EZ Stop® II Shock Absorbing Lanyard with aluminum hook (2-1/4” opening) at one end $99.13
Price
Meets ANSI Z359.1 2007 standard 3,600 lb gate requirement
1240006
1240077
EZ Stop® II Shock Absorbing Lanyard EZ Stop® II Shock Absorbing Lanyard with aluminum hook (2-1/4” opening) at one end $79.50
Contracts 6ft. to 4ft. greatly
reducing the chances of tripping,
snagging or dragging. Specially
woven shock-absorbing inner
core smoothly expands 42in. to
reduce fall arrest forces. Heavyduty tubular outer jacket serves
as a back-up web lanyard.
Innovative stretchable webbing
design offers greater maneuverability. Unique warning flag provides visual
proof that a lanyard has been involved in a fall and should be removed
from service.
Integral bright red shock-absorbing inner core makes visual inspection
easier and more reliable. Available in green or blue webbing with greater
chemical resistance.
Standard extended length is six feet; additional lengths available.
$134.00
EZ Stop® II Twin-Leg
100% Tie-Off Shock .
Absorbing Lanyard
All of the same features as above with the following benefits:
• Twin-leg 100% tie-off style helps you remain connected at all times
• Easy to use self locking snap hooks at leg ends and center
Item
Description
1220406
1220416
EZ Stop® II Twin-Leg 100% Tie-Off Shock Absorbing Lanyard
$86.14
EZ Stop® II Twin-Leg 100% Tie-Off Shock Absorbing Lanyard with self locking snap hook at center and aluminum hooks (2-1/4” opening) at the leg ends. $163.20
Item
Description - 6ft Length
216M 219M 231M Lanyard w/Two locking snap hooks with 3/4-inch gate openings
$88.91
Lanyard w/ One locking snap hook with 3/4-inch gate opening and one locking rebar hook with 2-1/2 inch gate opening
$127.42
Lanyard w/ Two-legged design with one locking snap
hook with 3/4-inch gate opening and two locking rebar hooks with 2-1/2 inch gate openings
$246.33
Price
Price
Meets ANSI Z359.1 2007 standard 3,600 lb gate requirement
1240406
1240416
Manyard® II Shock-Absorbing
Lanyards offer you value-added
design and safety features.
EZ Stop® II Twin-Leg 100% Tie-Off Shock Absorbing Lanyard
$112.00
EZ Stop® II Twin-Leg 100% Tie-Off Shock Absorbing Lanyard with self locking snap hook at center and aluminum hooks (2-1/4” opening) at the leg ends. $223.00
ShockWave2™
Shock Absorbing
Lanyard
ShockWave2™ shock
absorbing tubular webbing
lanyards are stretchable for complete freedom of movement.
The ShockWave2™ incorporates a unique inner core that immediately
begins to extend and absorb energy during a fall, limiting arresting forces
to no more than 900 lbs. Expands to 6 ft. and contracts to 4-1/2 ft. with
an impact indicator.
• Self locking snap hooks at both ends
1224406
• Twin-leg 100% tie-off style
• Self locking snap hooks at center and at the leg ends
D-ring Extension for Harness
• 18” D-ring extension strap
• Snap hook at one end, D-ring at the other end
Item
Description
Price
1201117
D-ring Extension for Harness $30.24
Meets ANSI Z359.1 2007 standard 3,600 lb gate requirement
1231117
D-ring Extension for Harness Phone: 800-MALLORY
Item
Description
Price
1224306
1224406
Single Leg tie-off style
Twin-leg tie-off style $59.56
$94.64
Meets ANSI Z359.1 2007 standard 3,600 lb gate requirement
1244306
1244406
Single Leg tie-off style
Twin-leg tie-off style $77.50
$121.50
$38.50
Fax: 360-577-4244
WWW.MALLORYCO.COM
237
Fall PROTECTION – LANYARDs
EZ Stop® II
Shock Absorbing
Lanyard
SELF-RETRACTING LANYARD – Fall PROTECTION
Self-Retracting Lanyards
Self-Retracting Lanyards
Dyna-Lock® SRLs Now Rated to a Capacity of 400
LBS*
The Dyna-Lock Backpacker and Short-StopTM selfretracting lanyards (SRL) are fast-acting fall arresters
limiting free-fall distance, deceleration distance and fall
arrest forces while allowing the user freedom of movement. Ideal for climbing applications where vertical
mobility is needed. The Dyna-Lock is a component of
a personal fall arrest system and must be used in conjunction with a full body harness, anchorage connector
and qualified anchorage point. Three continuously
moving independent braking mechanisms prevent
freezing in icy or corrosive conditions. The DynaLock SRL has a 4.5 feet per second locking speed.
Meets ANSI Z359.1, ANSI A10.14 and applicable
OSHA Requirements.
• Capacity: 310 lbs maximum; 75 lbs minimum
• Line Breaking Strength: 3,400 lbf
• Arrest Force: Less than 900 lbf
• Arrest Distance: Less than 26 inches
Item
Description
506619
Backpacker, 20’ Nylon Strap, RL20S Hdw.
Price
$520.00
Aptura® LT12 Self-Retracting
Lanyard
MSA has set a new standard in the mechanical fall
protection market with the Aptura LT12 Self-Retracting
Lanyard (SRL). Never before has the market seen such
a state of the art device with so many standard features.
With its solid design and fast acting brake mechanism,
you can be confident that the Aptura LT12 SRL will be
there to protect you when you need it most.
The Aptura LT12 SRL features include:
• A durable, engineered thermoplastic housing to
increase service life
• A field-replaceable lifeline option. In the event that
the webbing should become damaged, this option
allows a user to replace the web lifeline in the field
without sending anything back to the manufacturer.
The Aptura LT12 is the first SRL on the market to
offer this feature.
• A lightweight design starting at 2.4 pounds, making it the lightest SRL
on the market
• A standard lifeline length of 12 feet. Available in lengths from 6 to 12
foot increments
• A 400 pound working capacity as a standard feature
• A constant lock-up rate to prevent the erratic, jerky lock-up (like a seat
belt) found on some types of personal fall limiters
• No annual factory re-certification required due to high quality construction, which reduces the cost of ownership, and eliminates down
time
• Integral load indicator to let you know when it is time to remove the
product from service
• SRL connector with integral swivel
• Meets ANSI A10.14, ANSI Z359.1, and all applicable OSHA standards, and is CSA certified
• ATO ordering flexibility allows you to order the exact options, and only
the options you want
Item
Description
10044229 12’ length with HL200 Lifeline Connection & a field replacement line
238
Phone: 800-MALLORY
Price
$120.32
The MSA Dyna-Lock Self-Retracting Lanyards (SRL)
are fast-acting fall arresters that limit free-fall distance,
deceleration distance and fall arrest forces while allowing
user freedom of movement. The Dyna-Lock SRL is
ideal for climbing applications where vertical mobility
is needed.
The Dyna-Lock SRL has a 4.5 feet per second locking
speed. A built-in shock absorber limits fall arrest forces
to under 900 lbf. Three continuously moving independent braking mechanisms prevent freezing in icy or corrosive conditions. Available with 3/16 inch galvanized or
stainless steel wire rope, or 1 inch wide nylon webbing.
A forged steel, zinc-plated, self-locking swivel snaphook
is present on each unit with a load indicator that activates and alerts the
user when the Dyna-Lock SRL has been impact loaded. The Roughneck
model incorporates a black corrosion-resistant coating designed for severe
environmental conditions. Meets ANSI Z359.1, ANSI A10.14, and applicable OSHA standards. Models with CSA part numbers are CSA certified.
*400 lbs capacity applies to the following models:
20’ web Dyna-Lock, 50’, 70’, & 95’ cable Dyna-Locks.
Item
Description
506204 506202 506208 506615
10017931
Dyna-Lock SRL, galvanized wire rope,
HL2000S, 16M (50’)
Dyna-Lock SRL, galvanized wire rope,
HL2000S, 10M (30’)
Dyna-Lock SRL, galvanized wire rope,
HL2000S, 30M (95’)
20’Strap Dyna-Lock, nylon, HL2000S 20’ Wire Rope Dyna-Lock, stainless steel, HL20000S
Price
$874.18
$797.69
$1,147.37
$400.00
$528.00
Black Rhino™
Self-Retracting Lifelines
Smallest and lightest 9ft. cable lifeline on the market
Designed to endure the daily rigors of harsh environments.
• Arrests free-falls within inches
• Ideal for harsh, challenging environments encountered in
concrete construction, welding and warehouse use
• Available with a variety of anchorage
connectors
• All models include a swivel locking
snap hook that prevents the lifeline
from twisting and tangling
• No annual factory recertification
required
Item
Description - 9 ft. Length
CFL-2
CFL-3
CFL-4 CFL-5
Includes steel twist-lock carabiner
$281.20
Includes stainless steel swivel shackle $281.20
Most Popular Model Includes steel twist-lock carabiner and stainless steel swivel shackle
$298.85
Includes locking rebar hook with 2-1/2 inch gate opening and stainless steel swivel shackle
$316.55
Fax: 360-577-4244
WWW.MALLORYCO.COM
Price
11 ft. Ultra-Lok® Self-Retracting .
Lifeline
The lightweight, compact design provides workers an affordable alternative to shock-absorbing lanyards.
• Greater versatility through dual
operation:
attach directly to the harness back
D-ring for use as a personal fall
limiter OR use as a traditional retractable lifeline (utilizing a variety of
anchorage connectors)
• A competitively-priced alternative to shock-absorbing lanyards • Quick-activating, high-strength stainless steal braking system
• 9 ft. working capacity
• No annual factory recertification required
• Visual load indicator-indicates when the unit must be removed from
service
Item
Description - 9 ft Length
PFL-1 PFL-2
PFL-3
PFL-4 PFL-5
PFL-6
PFL-7
PFL-8
Does not include an anchorage connector; lanyard end
locking snap hook (3/4 in. gate opening)
$114.65
Includes steel twist-lock carabiner; lanyard end locking
snap hook (3/4 in. gate opening)
$129.75
Includes stainless steel swivel shackle; lanyard end locking snap hook (3/4 in. gate opening)
$129.80
Most Popular Model Includes steel twist-lock carabiner and stainless steel swivel shackle; lanyard end locking snap hook (3/4 in. gate opening)
$144.95
Includes D-ring swivel hook; lanyard end locking snap hook (3/4 in. gate opening) $144.95
Includes rebar hook and stainless steel swivel shackle; lanyard end locking snap hook (3/4 in. gate opening)
$160.35
Includes locking snap hook and stainless steel swivel shackle; lanyard end locking snap hook (3/4 in. gate opening)
$152.75
Includes captive eye carabiner; lanyard end locking snap hook (3/4 in. gate opening)
$137.45
Durable glass-filled polyurethane housing, a 1 inch web
lifeline and aluminum side plates for maximum durability
and minimum weight. Ultra-Lok® systems have an antiratcheting twin disc brake system with an audio indicator
to let you know it is working properly.
•
•
•
•
Stainless steel working components for corrosion resistance
Self-locking swivel snap hook with impact indicator
Swiveling anchorage loop to prevent twisting of lifeline
Meets or exceeds all applicable industry standards including OSHA,
ANSI and the stringent ANSI Z359
Item
Description
3103108
3103207
11 ft. Ultra-Lok™ Self Retracting Web Lifeline $373.87
20 ft. with 9503175 Lifeline Hook
$499.98
Price
Price
11 ft. Web Self Retracting Lifeline
These SRL’s feature a lightweight aluminum design
and small size with an 11 ft. working range.
•
•
•
•
11 ft. one-inch nylon web lifeline for reduced weight
Self-locking swivel snap hook with impact indicator
Anti-ratcheting twin disk brake
Meets or exceeds all applicable industry standards
including OSHA, ANSI and the stringent ANSI Z359
Item
Description
Price
3103031 3103020
11 ft. Self Retracting Web Lifeline
11 ft. with 9503175 self locking snap hook
$444.53
$430.92
50 ft. Ultra-Lok® Self-Retracting Lifeline
Durable glass-filled polyurethane housing, a 3/16” wire rope
lifeline and aluminum side plates for maximum durability
and minimum weight. Ultra-Lok® systems have an
anti-ratcheting twin disc brake system with an audio
indicator to let you know it is working properly.
• Self-locking swivel snap hook with impact indicator
• Swiveling anchorage loop to prevent twisting of lifeline
• Meets or exceeds all applicable industry standards including
OSHA, ANSI and the stringent ANSI Z359
Talon® 8 ft. Self Retracting Lifeline
Talon® self retracting lifelines are engineered for reliable
protection that locks when it should; won’t lock when it
shouldn’t. The extremely lightweight design (just under
three pounds!) and quick-connect system gives you freedom of movement without compromising safety.
Description
3504450
50 ft. Ultra-Lok™ Self Retracting Wire Lifeline
Price
$899.81
50 ft. Sealed Self Retracting Lifeline
• 8 ft. of 1” nylon webbing
• All metal braking system for durability
• Quick-connect handle for direct attachment to anchorage or
harness
• Self-locking swivel snap hook with impact indicator
• Meets or exceeds all applicable industry standards including
OSHA, ANSI and the stringent ANSI Z359
Sealed SRL’s separates all components, including the motor
spring and brake, from grease, moisture and dirt.
Item
Description
3101000
Talon Self Retracting Lifeline with standard built in
anchorage connector for connection to harness or
anchorage,9503175 snap hook, 8 ft.
$198.17
Phone: 800-MALLORY
Item
Price
•
•
•
•
•
•
50 ft. 3/16” galvanized steel wire rope for durability
Self adjusting disc brake for reliability
Self-locking swivel snap hook with impact indicator
Swiveling anchorage loop to prevent twisting of lifeline
Stainless steel and cast aluminum housing for corrosion resistance
Meets or exceeds all applicable industry standards including OSHA,
ANSI and the stringent ANSI Z359
Item
Description
3403400 Self Retracting Web Lifeline Fax: 360-577-4244
WWW.MALLORYCO.COM
Price
$1,242.47
239
Fall PROTECTION – SELF-RETRACTING LANYARD
Scorpion™ Personal
Fall Limiter
ANCHORAGE CONNECTOR – Fall PROTECTION
506632
506266
506672
505282
Removable Roof
Anchor
Designed to be an anchorage connector for fall arrest or restraint
systems on flat or sloped wood
roof structures, the Removable
Roof Anchor may be used again
after inspection as detailed in the
included instructions. Meets OSHA requirements.
The anchor is heavy 1/4” thick steel, with a zinc plated, forged alloy steel
O-ring to which is connection point for the fall arrest or restraint system.
It is attached using six 1/4” x 2-1/2” or longer lag screws, or twelve 16d
nails into the sheathing and joist, rafter or roof member. Minimum
breaking strength is 5,000 lbs. Overall length when flat is 25”; weight is
4.4 lbs. Includes product labeling and complete instructions.
Item
Description
Price
2103673
Removable/Reusable Roof Anchor
$73.47
Anchorage Connectors
• Have a minimum breaking strength of
5,000 lb.
• Compatible for use with MSA fall arrest and
confined space entry/retrieval components
• Meets ANSI Z359.1, ANSI A10.14, and
OSHA standards
10003210
Item
Description
505282
10042794
506632 506672 506266 10003210 Anchorage connector strap, nylon, 5’ $28.88
PointGuard concrete anchorage connector strap, 4’ with D-ring
$10.65
D-plate anchorage connector, zinc-plated steel $16.00
D-plate, anchor, with anodized aluminum back-plate
$100.00
BeamGlide trolley, removeable, ball lock pin, specify beam size
$546.36
Adjustable beam grip
$279.00
Price
U-Bolt Roof Anchor
This anchor is for use on roof truss, joist, rafter
or roof member up to 2” x 8” in size. These
devices are designed to be anchorage connectors
for personal fall arrest or restraint systems used
on flat or sloped wood structures.
These U-bolt style stainless steel roof anchors
are designed to be permanently installed safety
anchors which come complete with lock-washers
and nuts, PVC, U.V. stabilized flashing, product labeling with a remote
site label and complete instructions. Meets OSHA requirements. Size:
3/8” x 3” x 13-7/8”; weight is 1.5 lbs. Minimum breaking strength is
5,000 lbs.
Item
Description
Price
2103670
U-Bolt Roof Anchor
$51.15
Carabiner
Item
Description
Price
506572 506308 Carabiner, 7/8” (22 mm) gate, twist lock, steel
Carabiner, 2” (50 mm) gate, twist lock, steel
$22.50
$33.75
Saflok® Carabiner
Fixed Beam Anchor
• Anchor is easily installed by
sliding the adjustable hook-end
sown to the flange and securing a pin
• Easily adjust to exactly where you want it in any orientation or direction
• Fits 1-1/2” thick flange,
• 5,000 lbs. minimum strength in any direction
Item
Description
2108406
2108407
2108408
2108410
Fits 2-1/2” to 12” wide flange Fits 2-1/2” to 18” wide flange Fits 2-1/2” to 24” wide flange Fits 12” to 36” wide, 1/2” to 2-1/2 thick
240
Phone: 800-MALLORY
Price
$270.09
$303.16
$330.72
$362.69
An extremely versatile choice to
keep your system securely connected. Workers appreciate the reduced weight and easy operation it
offers.
•
•
•
•
•
Self-closing/Self-locking gate
Steel construction
User-friendly design
Minimum tensile strength of 5,000 pounds
Compatible with most connecting rings
Item
Description
Price
2000106
2000108
1-3/16” gate opening Carabiner
2” gate opening Carabiner
$60.16
$63.50
Meets ANSI Z359.1 2007 standard 3,600 lb gate requirement
2000113
2000114
Fax: 360-577-4244
1-3/16” gate opening Carabiner
2” gate opening Carabiner
WWW.MALLORYCO.COM
$73.00
$74.50
For Poly 5/8” rope
Fall arrest device that
travels up and down 5/8”
vertical lifeline rope. Locks
onto rope through cam design to lock fallen worker in place on lifeline.
Unique, versatile, lightweight and affordable, the FP Pro Rope Grab
features:
• Hands-free operation while ascending or descending
• Ultra-smooth travel action
• Cam and hinge design allows for a quick, easy installation on the rope
• Available with either polyester or polyester/polypropylene blend rope
Item
Description
415940
3’ Rope Grab with Dyna-Brake shock absorbing lanyard
Price
$163.90
10054077
Rope Grabs and Vertical
Lifelines
Item
Description
10054077 Rope Grab Fall Arrester
Item
$107.09
Description
Price
Vertical lifelines with RL20 snaphook on one end
415865
415869
415870
415871
415872
415873
25’- 5/8” polyester rope
50’- 5/8” polyester rope
75’- 5/8” polyester rope
100’- 5/8” polyester rope
150’- 5/8” polyester rope
200’- 5/8” polyester rope $67.98
$100.17
$132.36
$164.54
$228.92
$293.29
Item
Description
Price
Vertical lifelines with twist lock carabiner on one end
416048
416049
416050
416051
416052
416053
25’- 5/8” polyester/polypropylene 50’- 5/8” polyester/polypropylene
75’- 5/8” polyester/polypropylene 100’- 5/8” polyester/polypropylene
150’- 5/8” polyester/polypropylene
200’- 5/8” polyester/polypropylene
Item
Description
5000335
Rope Grab - 5/8” Poly Rope Price
$102.95
Lad-Saf® Static Wire Rope Grab
Fits 3/8” diameter 7x19 galvanized or stainless steel cable
DBI/SALA’s Lad-Saf® static wire rope grabs can be positioned
exactly where you want them to be and moved each time you do.
They can be installed or removed at any point on the lifeline. The
rope grab utilizes a patented wedging action that grips and locks
the rope grab onto the lifeline in case of a fall. Meets or exceeds
all applicable industry standards including OSHA, ANSI and the
stringent ANSI Z 359
Item
Description
5003388
Lad-Saf® Static Wire Rope Grab
Price
$205.00
Price
Designed to allow maximum freedom of movement. The inertia/cam locking system utilizes a cam
lever as well as a friction sensitive brake to lock the
rope grab onto the lifeline during fall situations.
The rope grab features a shock energy absorbing design. Note: use 5/8”
diameter synthetic polyester or polyester/polypropylene rope only.
$56.65
$76.22
$95.79
$114.33
$150.38
$186.43
Rope Adjuster
This rope adjuster with an attached 3 foot shock absorbing lanyard is designed to be a static rope grab that is the
connecting lanyard between the full body harness and the
lifeline. By compressing the rope adjuster forward, the
worker can slide along the lifeline until reaching their work
position. Release the rope adjuster and it locks onto the lifeline providing fall protection to the worker attached. This
may be ordered separately from the roof anchor kits. Overall
length is 42 inches and weighs 1.4 lbs. Minimum Breaking
Strength is 5,000 lbs. Comes complete with: Rope adjuster
with 3 ft. S/A lanyard and double locking 004339 hook.
Item
Description
1224005
Rope Adjuster
Price
$148.24
Meets ANSI Z359.1 2007 standard 3,600 lb gate requirement
1244006
Rope Adjuster ANSI Compliant
$77.00
Tie Off Adaptor
Pass thru type; 3 ft.
Lifeline Assemblies
Item
Description
Price
1003000
Tie Off Adaptor
$35.50
Counterweight Rigid
• 5/8” polyester/polypropylene blend rope
• Self locking snap hook at one end Taped at other end
Item
Item
Description
Price
1202754
1202794
1202821
1202844
30 ft. Rope Lifeline Assembly 50 ft. Rope Lifeline Assembly 75 ft. Rope Lifeline Assembly 100 ft. Rope Lifeline Assembly
$46.46
$60.06
$77.06
$94.06
Phone: 800-MALLORY
Description
5901582 6.4 lbs. Price
$52.09 Carrying Bag
For lifeline retrieval systems.
Item
Description Price
9503514
Carrying Bag
Fax: 360-577-4244
WWW.MALLORYCO.COM
$67.04
241
Fall PROTECTION – HORIZONTAL / VERTICAL LIFELINES
Rope Grab FP Pro Rope
Grab
HORIZONTAL / VERTICAL LIFELINES – Fall PROTECTION
Sure-Line™ Temporary
Cable Horizontal Lifeline
Allows up to two workers to move horizontally without having to connect to multiple anchorage points
The Sure-Line temporary Horizontal Lifeline is a lightweight cable system
that is suspended between two approved anchor points to provide worker
fall protection during horizontal movement. Designed for quick and easy
installation at temporary worksites, the Sure-Line system:
• Includes an integral shock absorber
• Uses a 3/8”, 6 x 36 galvanized cable
• Incorporates a combination clamp/thimble that allows for effortless
tensioning of lifeline
• Rated for up to two people
Other lengths available
Item
Description
SHL2009040 40 ft Sure-Line™ Temporary Horizontal Lifeline
1-5
$409.82
6+
$389.33
Dyna-Line® Temporary Synthetic Horizontal
Lifeline
Designed for quick and easy
installation and removal.
The Dyna-Line can be mounted to any suitable 5000 pound rated
anchorage point and can be rigged using many standard components,
eliminating the need for special equipment. The lifeline has an integral
line tensioner that allows proper tensioning of the lifeline before use. The
lifeline is a 12-strand rope that has very low stretch properties and will not
buckle. The two-worker system includes 2 polyester anchorage straps, a
60 ft., 5/8” black nylon kernmantle rope, and comes in bucket for easy
transportation and storage.
Item
Description
10013152 Temporary Synthetic Horizontal Lifeline
FP Pro Roofers Kit
Kit Includes:
• FP Pro Vest-Style Harness
• Lifeline with Locking Carabiner
• Rope Grab is a lightweight and affordable fall arrest device
• Wood Anchors & Woodscrews are disposable
• Roof Anchors constructed from heavy-gauge steel with a galvanized
finish. Each comes with 8 galvanized flathead woodscrews.
• Totebag
Item
Description
416067
416068
416077
416069
FP Pro Roofers Kit
Roof Anchors, 3 pack, boxed w/wood screws
Roof Anchors, Bulk package of 24
Eight Packs of Disposable Roof Anchor Kits,
3 Anchors per pack plus 24 wood screws
242
Phone: 800-MALLORY
Price
$520.00
6+
$494.00
Ask your Sales Representative for a
Fall Protection Assessment on your site.
Mobile equipment demonstrations
available in some areas.
Call today and ask for more information
and a full line MSA Catalog. 1-800-MALLORY
$334.75
$31.00
$185.00
$239.88
Fax: 360-577-4244
1-5
WWW.MALLORYCO.COM
Suretyman™ Rescue
Utility System
The Fall Protection Rescue kit is
designed to be an
out-of-the-bag rescue
system. This kit
combines a remote
hook and extension
pole with a rescue
utility system.
The remote hook
and extension pole
allow for remote attachment of a rescue
line to a victim. The
Rescue Utility System allows a rescuer
to raise or lower the
victim to safety. This
kit should be used
with a back-up system (not included).
Kit includes:
• Adjustable 6 to 12
ft. Pole
• Pole Adapter
• Remote Hook
• Storage Bag & Rescue Utility System
Item
Description
1-5
6+
10030025 Fall Protection Rescue Kit
$1,406.75 $1,336.41
SFP675012Adjustable 8 ft to 24 ft Fiberglass Pole
$173.00
Accessories
$164.35
The Suretyman Rescue Utility System
incorporates all the features professionals have come to expect from a
first class rescue system. The system is
primarily used for raising and lowering people or equipment in rescue
and industrial work access and is ideal
for confined space applications.
The Suretyman Rescue Utility System
features:
• Pulleys equipped with a built-in
anti-reversing lock
• Only a 10 lb force is all that is
required to hold a 220 lb (90 kg)
load
• Suretyman ascender attached to
both the operating rope and the
user via a securing rope - if the
operating rope accidentally releases,
the ascender automatically stops
the descent
• Rapid deployment
• Virtually maintenance free
• Rated for 2-person load
• Compact and light weight with a
standard system weight of 17 lb
(7.7 kg)
• Versatile for rescue & access
• Multi-purpose ascent or descent
• Rated capacity of 600 lb (272 kg) for personnel and materials
• Standard rope length of 200 ft (66m) with a maximum rope length of
800 ft (267m)
Item
Description
SRS15200 Suretyman Rescue Utility System (200’ length)
1-5
6+
$1,060.90 $1,007.86
SuretyMan™ Rescue Eight
• Designed for the fire service, rescue, and police
tactical operations
• Use with rope diameters from 7/16” to 5/8”
(11 to 16 mm)
• Available in aluminum or steel
• Weight 1.5 lb (675 g) nd Strength 6,720 lb (30 kN)
Rescue Etrier
Sewn-loop ladder for emergency rescue and evacuation.
Used for ascending in tight areas where other portable
ladders cannot be used.
Etrier is French for a set of ascending web stirrups sewn or
tied together. The Etrier is useful for stretcher tendering and
other vertical activities including getting over difficult edges.
The six foot loops are reinforced/stiffened for easier foot
placement and abrasion resistance.
Length: 7 ft (2.1 m). Weight: 9 oz (280 g).
Item
Description
1-5
SRS3200
Rescue Etrier
$50.47
Phone: 800-MALLORY
Item
Description
SRSF5045 SuretyMan Steel Rescue Eight
1-5
$40.04
6+
$38.04
6+
$47.95
Fax: 360-577-4244
WWW.MALLORYCO.COM
243
Fall PROTECTION – RESCUE EQUIPMENT
Fall
Protection
Rescue Kit
CONFINED SPACE EQUIPMENT – Fall PROTECTION
Dynevac® II Field Resettable
Fall Arrest & Lifting System
Lynx® Personnel/Material Hoist
• Designed for lifting, lowering,
and positioning of personnel and
materials
• Maximum work load of 310 lbs
for personnel and 620 lbs for
materials
• Anti-backlash crank handle with a
lifting/lowering speed of 25 ft per
minute
• Integral shock absorber
• Load-limiting clutch prevents
overloading of hoist
• Emergency drive allows manual bypass of loadlimiting clutch for extra lifting capacity in an
emergency
• Primary gear backed up by two independent secondary brakes
• Air drive adapter enables powered lifting/lowering with optional airpowered drive assembly
• Meets all applicable ANSI and OSHA standards
Item
Description
10016569 10016568 10016683 10016682 506473 Side mount with emergency drive and air drive adapter, 50’ galvanized wire rope $1,766.77
Side mount with emergency drive and air drive adapter, 105’ galvanized wire rope $1,817.26
Boom mount with emergency drive and air drive adapter, 50’ galvanized wire rope $2,044.42
Boom mount with emergency drive and air drive adapter, 105’ galvanized wire rope
$2,094.90
Lynx Hoist Side mount pulley/bracket assembly for Lynx Tripod
$208.95
Price
Designed for fall arrest, lifting and lowering, rescue and
work positioning. They incorporate an anchorage connector, fall arrest component, a personnel and materials
handling hoist, and associated hardware to rig the system
for use. The systems can be used for leading edge work,
maintenance and entry/retrieval from manholes, tank cars, and
other confined space applications.
The Dynevac® II is a self-retracting lanyard with emergency retrieval capabilities. It is field resettable, giving you the option to
reset on location with the industry’s quickest reset mechanism
on the market, or, send to Rose for service. Thus, the same unit
can be used for field work, or training. The Dynevac® II has a built-in
rescue system when used in fall arrest mode. Confined space entry mode
provides fall protection and emergency lifting and lowering. Meets ANSI
Z359.1, A10.4 and OSHA requirements.
NOTE: With proper inspection, system may be reused after fall arrest and/or
retrieval.
Item
Description
10007782
10007783
Dynevac® II 50’ Self Retracting Lanyard with Emergency
Rescuer, 3/16” diameter stainless steel line $1,857.64
As above, Dynevac® II 95’ Self retracting Lanyard with Emergency Rescue
$2,294.73
Price
Salalift® II & Tripod Rescue
System
Complete rescue system including tripod
and Salalift® II winch
• UL classified 7’ aluminum tripod
• Designed for durability and light weight,
the tripod is easy to set up and transport
• Complete with quick mount bracket for
Salalift® II winch attachment
• Rated working load is 350 lbs. for work
support and 310 lbs. for fall arrest
• Salalift® II winch is designed for raising, lowering, work support or
personnel rescue
• Lightweight design for ease of use
• Durable corrosion resistant construction featuring anodized aluminum
side plates, zinc plated gears and shafts, stainless steel springs and aluminum drum for superior corrosion resistance
• Overload clutch reduces chance of injury to entangled worker
• Winch features 60’ of galvanized 1⁄4” steel cable
• Leg mount pulley
• Bag for SRL and winch
Lynx® Tripod
• Automatic hinge lock legs
• Constructed of three anodized
aluminum legs and a zincplated carbon steel head
• Legs feature 1-1/4 in. incremental adjustment with positive
locking pins
• Skid resistant feet with selfsharpening spikes
Item
Description
10022050 506222 506232 506216
8’ Lynx Tripod
Split mount pulley
Lynx Rescuer mounting bracket for Tripod 10M (30’)/ 16M (50’)
Lynx Rescuer mounting bracket for Tripod 22M (70’)/ 30M (95’)
Price
$708.88
$92.89
$230.00
$240.00
Item
Description
8304010
Salalift® II & Tripod Rescue System Price
$4,870.00
Item
Description Price
8003205 9503094 8003238 Snatch Block: attaches to tripod eye
bolt for routing of winch or SRL cable Tripod carrying bag for 7’ models Leg Mount Pulley: attaches to tripod leg
for routing of winch or SRL cable Tripod Accessories
$76.90
$109.80
Ask for details on other tripod and winch systems.
244
Phone: 800-MALLORY
Fax: 360-577-4244
WWW.MALLORYCO.COM
$113.21