1. No category

SCOPE OF ACCREDITATION
PARIO ENGINEERING & ENVIRONMENTAL SCIENCES LP
PARIO ENGINEERING & ENVIRONMENTAL SCIENCES LP
553 Basaltic Road Unit B
Concord, ON
L4K 4W8
Accredited Laboratory No. 727
(Conforms with requirements of CAN-P-4E (ISO/IEC 17025:2005))
CONTACT:
TEL:
EMAIL:
URL:
Mr. Eduardo Mari
1.888.762.4667
[email protected]
www.pariosciences.ca
CLIENTS SERVED:
All interested parties
FIELDS OF TESTING:
Mechanical/Physical
ISSUED ON:
2015-04-08
VALID TO:
2015-12-20
METALLIC ORES AND PRODUCTS
Articles of Metal:
(Machinery (Boilers, Pressure Vessels and Piping))
ASME B & PV Section II
SA370
ASME B & PV, Section IX
QW-184
ASME B & PV, Section IX
QW-216
ASME Section IX
AWS D1.1
AWS D1.2
CSA W59
AWS D14.3
CSA 47.1
GM4485M
Specifications for Test Methods and Definitions for
Mechanical Testing of Steel Products
Macroexamination - Performance Specimens
Hardfacing Overlay Macroexamination and Hardness
Testing
Qualification of Weldments (Visual Examination,
Metallography and Hardness testing)
Only for: Visual Examination, Metallography and
Hardness testing
Weld Specifications for Laser Weld - Butt Joints
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 1 of 4
Standards Council of Canada Accredited Laboratory No. 727
GM4488M
GM4491M
GM6122M
SAE AMS-STD-1595A
Automotive Resistance Spot Welds
Arc Spot, Plug and Slot Welding Specification
Arc Welding Specification
Qualification of Aircraft, Missiles and Aerospace Fusion
Welders
Only for: Visual examination and metallography
(Machinery (Fasteners))
ASTM F2328
ASTM F606
GM255M
GM260M
GM275M
GM280M
GM290M
GM300M
GM455M
GM284M
GM286M
GM301M
GM305M
GM456M
GM510M
GM500M
SAE J1199
SAE J429
Standard Test Method for Determining Decarburization
and Carburization and Hardened and Tempered Threaded
Steel Bolts, Screws and Studs
Standard Test Method for Determining the Mechanical
Properties of Externally and Internally Threaded
Fasteners, Washers, Direct Tension Indicators and Rivets
Only for: Product hardness, carburization and
decarburization
Mechanical and Quality Requirements for Externally
Threaded Fasteners
Except for: tensile test
Mechanical and Quality Requirements for Internally
Threaded Fasteners
Except for: tensile test
Test Methods for Metric Threaded Fasteners
Mechanical and Material Requirements for Metric
Externally Threaded Steel Fasteners
Mechanical and Materials Requirements for Externally
and Internally Threaded Fasteners, Washers and Rivets
Only for: hardness and decarburization
(Machinery (Hardness))
ASTM A370
ASTM E10
ASTM E18
Standard Test Methods and Definitions for Mechanical
Testing of Steel Products
Only for: Brinell and Rockwell hardness
Standard Test Method for Brinell Hardness of Metallic
Materials
Standard Test Methods for Rockwell Hardness of
Metallic Materials
ASTM E384
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 2 of 4
Standards Council of Canada Accredited Laboratory No. 727
Standard Test Method for Microindentation Hardness of
Materials
Only for: Vickers hardness
(Metallography)
ASTM A247
ASTM A604
ASTM B487
ASTM E112
ASTM E3
ASTM E340
ASTM E381
ASTM E407
ASTM E45
SAE J422
ASTM F788
ASTM F812
ISO 6157-1
SAE J123
SAE J1061
SAE J419
SAE J121
SAE J423
Standard Test Method for Evaluating the Microstructure
of Graphite in Iron Casting
Standard Practice for Macroetch Testing of Consumable
Electrode Remelted Steel Bars and Billets
Standard test Method for Measurements of Metal and
Oxide Coating Thickness by Microscopical Examination
of a Cross Section
Standard test Methods for Determining the Average
Grain Size
Standard Practice for Preparation of Metallographic
Specimens
Standard Test Method for Macroetching Metals and
Alloys
Standard Test Method for Macroetch Testing Steel Bars,
Billets, Blooms and Forgings
Standard Practice for Microetching Metals and Alloys
Standard Test Method for Determinating the Inclusion
Content of Steel
Only for: Method A
Standard Specification for Surface Discontinuities of
Bolts, Screws, Nuts and studs
Standard Specification for Surface Discontinuities of
Nuts
Fasteners Surface Discontinuity
Surface Discontinuities on Bolts, Screws, and Studs in
Fatigue Applications
Methods of Measuring Surface Decarburization
Except for: chemical analysis methods
Methods of Measuring Case Depth
Except for: chemical methods
Notes:
ASME: American Society of Mechanical Engineers
ASTM: American Society for Testing and Materials
AMS : Aerospace Material Specification
AWS : American Welding Society
GM : General Motors Engineering Standard
ISO : International Organization for Standardization
SAE : The Engineering Society for Advancing Mobility Land Sea Air and Space
CAN-P-4E (ISO/IEC 17025): General Requirements for the Competence of Testing and Calibration
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 3 of 4
Standards Council of Canada Accredited Laboratory No. 727
Laboratories (ISO/IEC 17025-2005)
Chantal Guay, ing., P. Eng.
Vice President, Accreditation
Services
Date: 2015-04-08
Number of Scope Listings: 35
SCC 1003-15/887
Partner File #0
Partner:
The approved and most recent version of this document can be viewed on the SCC website at http://palcan.scc.ca/SpecsSearch/GLSearchForm.do
Page 4 of 4